[1970-Jan-01 00:01:33.870645]: Loading settings from string...
[1970-Jan-01 00:01:34.180880]: Parsing toolhead settings for bronx...
[1970-Jan-01 00:01:34.250884]: Rebuilding toolhead structure
[1970-Jan-01 00:01:34.289429]: Building bronx location 0...
[1970-Jan-01 00:01:34.464847]: Initialization: heater settings
[1970-Jan-01 00:01:34.466725]: storing heater 0 to time out after 3 minutes at temp, 1 minutes with no rise of 10C, fan feedforward amount 15C
[1970-Jan-01 00:01:34.488158]: Settings: Parsing home subtree...
[1970-Jan-01 00:01:34.525439]: Init endstop for axis: 0, type: load_sense, polarity: false
[1970-Jan-01 00:01:34.541773]: Init endstop for axis: 1, type: load_sense, polarity: false
[1970-Jan-01 00:01:34.543572]: Init endstop for axis: 2, type: toolhead, polarity: false
[1970-Jan-01 00:01:34.569491]: Parsing root settings...
[1970-Jan-01 00:01:34.641634]: STEPPER CONVERSIONS: Axis 0 steps per mm: 88.5732
[1970-Jan-01 00:01:34.667325]: STEPPER CONVERSIONS: Axis 1 steps per mm: 88.5732
[1970-Jan-01 00:01:34.669211]: STEPPER CONVERSIONS: Axis 2 steps per mm: 400
[1970-Jan-01 00:01:34.681383]: STEPPER CONVERSIONS: Axis 3 steps per mm: 108.55
[1970-Jan-01 00:01:34.683339]: STEPPER CONVERSIONS: Axis 0 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 243 29 0
[1970-Jan-01 00:01:34.685569]: STEPPER CONVERSIONS: Axis 1 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 32 29 0
[1970-Jan-01 00:01:34.687790]: STEPPER CONVERSIONS: Axis 2 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 32 32 0
[1970-Jan-01 00:01:34.689953]: STEPPER CONVERSIONS: Axis 3 periods per second 17847.6 seconds per period 5.603e-05 slowest tickrate axis 3 tickrate 5.603e-05 radices 32 32 32 31
[1970-Jan-01 00:01:34.702730]: syncing set to true
[1970-Jan-01 00:01:34.741674]: Axis count unspecified, defaulting to 4
[1970-Jan-01 00:01:34.780750]: Loading capacitor model settings for extruder 0
[1970-Jan-01 00:01:34.784261]: Have 1 valid ToolheadManager pointers, 0 is 0x1de7a8
[1970-Jan-01 00:01:34.911990]: setting driver address to 22
[1970-Jan-01 00:01:38.209568]: Init step: 0
[1970-Jan-01 00:01:38.274142]: Reset Toolhead Program State
[1970-Jan-01 00:01:38.275823]: Toolhead programmer: Resetting
[1970-Jan-01 00:01:38.277467]: done
[1970-Jan-01 00:01:39.463704]: Init step: 1
[1970-Jan-01 00:01:39.481118]: done
[1970-Jan-01 00:01:39.965431]: Init step: 2
[1970-Jan-01 00:01:39.967313]: done
[1970-Jan-01 00:01:40.469106]: Init step: 3
[1970-Jan-01 00:01:40.643952]: done
[1970-Jan-01 00:01:40.981038]: Init step: 4
[1970-Jan-01 00:01:41.003735]: done
[1970-Jan-01 00:01:41.474218]: Init step: 5
[1970-Jan-01 00:01:41.490851]: done
[1970-Jan-01 00:01:41.976661]: Init step: 5
[1970-Jan-01 00:01:42.078708]: done
[1970-Jan-01 00:01:42.478402]: Init step: 5
[1970-Jan-01 00:01:42.560513]: done
[1970-Jan-01 00:01:42.979920]: Init step: 5
[1970-Jan-01 00:01:42.991940]: done
[1970-Jan-01 00:01:43.486597]: Init step: 5
[1970-Jan-01 00:01:43.500480]: done
[1970-Jan-01 00:01:43.989758]: Init step: 5
[1970-Jan-01 00:01:44.102185]: done
[1970-Jan-01 00:01:44.499487]: Init step: 5
[1970-Jan-01 00:01:44.513037]: Toolhead 0: Packet 0x0: Calculated CRC: 0x62f5481b  Packet CRC: 0x0
[1970-Jan-01 00:01:44.514906]: Toolhead 0 : Toolhead Response Fail with comm_error: 1  Retry # : 1
[1970-Jan-01 00:01:44.516571]: done
[1970-Jan-01 00:01:45.011136]: Init step: 5
[1970-Jan-01 00:01:45.012928]: done
[1970-Jan-01 00:01:45.513041]: Init step: 5
[1970-Jan-01 00:01:45.520477]: done
[1970-Jan-01 00:01:46.015496]: Init step: 5
[1970-Jan-01 00:01:46.117541]: done
[1970-Jan-01 00:01:46.519409]: Init step: 5
[1970-Jan-01 00:01:46.532915]: Got valid API version 6 for Toolhead 0
[1970-Jan-01 00:01:46.540961]: done
[1970-Jan-01 00:01:47.030687]: Init step: 5
[1970-Jan-01 00:01:47.032960]: done
[1970-Jan-01 00:01:47.528821]: Init step: 5
[1970-Jan-01 00:01:47.641180]: done
[1970-Jan-01 00:01:48.041716]: Init step: 5
[1970-Jan-01 00:01:48.044863]: Toolhead 0: Toolhead has Firmware version 1.7,734
[1970-Jan-01 00:01:48.047124]:  Toolhead 0 initialized
[1970-Jan-01 00:01:48.049441]: done
[1970-Jan-01 00:01:48.545237]: Init step: 6
[1970-Jan-01 00:01:48.546952]: done
[1970-Jan-01 00:01:49.047630]: Init step: 7
[1970-Jan-01 00:01:49.060466]: done
[1970-Jan-01 00:01:49.573080]: bronx lowest mem space: 0x376 bytes
[1970-Jan-01 00:01:49.574920]: Checking tool eeprom version
[1970-Jan-01 00:01:49.576548]: Commanding tool usage stat retrieve
[1970-Jan-01 00:01:49.578179]: New tool uid 0xac97 attached, updating info cache
[1970-Jan-01 00:01:49.592843]: Connected tool has eepromv4
[1970-Jan-01 00:01:49.601754]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-01 00:01:49.603513]: Steps/mm not configured, tool usage logging will be wrong!
[1970-Jan-01 00:01:49.630378]: PRU Event: PRU_INIT
[1970-Jan-01 00:01:51.139811]: Loading settings from string...
[1970-Jan-01 00:01:51.271622]: Parsing toolhead settings for bronx...
[1970-Jan-01 00:01:51.274070]: Initialization: heater settings
[1970-Jan-01 00:01:51.276320]: storing heater 0 to time out after 3 minutes at temp, 1 minutes with no rise of 10C, fan feedforward amount 15C
[1970-Jan-01 00:01:51.278428]: Settings: Parsing home subtree...
[1970-Jan-01 00:01:51.291519]: Init endstop for axis: 0, type: load_sense, polarity: false
[1970-Jan-01 00:01:51.293389]: Init endstop for axis: 1, type: load_sense, polarity: false
[1970-Jan-01 00:01:51.295373]: Init endstop for axis: 2, type: toolhead, polarity: false
[1970-Jan-01 00:01:51.297111]: Parsing root settings...
[1970-Jan-01 00:01:51.298998]: STEPPER CONVERSIONS: Axis 0 steps per mm: 88.5732
[1970-Jan-01 00:01:51.311200]: STEPPER CONVERSIONS: Axis 1 steps per mm: 88.5732
[1970-Jan-01 00:01:51.313637]: STEPPER CONVERSIONS: Axis 2 steps per mm: 400
[1970-Jan-01 00:01:51.315522]: STEPPER CONVERSIONS: Axis 3 steps per mm: 108.55
[1970-Jan-01 00:01:51.317347]: STEPPER CONVERSIONS: Axis 0 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 3 tickrate 5.603e-05 radices 32 32 32 31
[1970-Jan-01 00:01:51.319555]: STEPPER CONVERSIONS: Axis 1 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 3 tickrate 5.603e-05 radices 32 32 32 31
[1970-Jan-01 00:01:51.332270]: STEPPER CONVERSIONS: Axis 2 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 3 tickrate 5.603e-05 radices 32 32 32 31
[1970-Jan-01 00:01:51.334669]: STEPPER CONVERSIONS: Axis 3 periods per second 17847.6 seconds per period 5.603e-05 slowest tickrate axis 3 tickrate 5.603e-05 radices 32 32 32 31
[1970-Jan-01 00:01:51.337140]: syncing set to true
[1970-Jan-01 00:01:51.357029]: Axis count unspecified, defaulting to 4
[1970-Jan-01 00:01:51.373362]: Loading capacitor model settings for extruder 0
[1970-Jan-01 00:01:51.377716]: Have 1 valid ToolheadManager pointers, 0 is 0x1de7a8
[1970-Jan-01 00:01:51.496596]: GetCachedToolUsageStats called
[1970-Jan-01 00:01:54.246958]: bronx lowest mem space: 0x372 bytes
[1970-Jan-01 00:02:13.007102]: GetCachedToolUsageStats called
[1970-Jan-01 01:44:36.564256]: bronx lowest mem space: 0x36a bytes
[1970-Jan-01 20:12:05.718198]: TH0: 2 failures in last 65536 packets (0.00305176%)
[1970-Jan-02 08:37:48.201717]: bronx lowest mem space: 0x362 bytes
[1970-Jan-10 09:28:31.952764]: bronx lowest mem space: 0x35e bytes
[1970-Jan-18 14:37:35.335381]: GetCachedToolUsageStats called
[1970-Jan-18 15:04:49.677312]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-18 15:04:49.679291]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 15:04:50.872764]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-18 15:04:50.890640]: bronx lowest mem space: 0x352 bytes
[1970-Jan-18 15:05:00.180771]: Toolhead 0 state error: 80
[1970-Jan-18 15:05:02.867527]: Toolhead 0 state error: 0
[1970-Jan-18 15:07:36.355411]: GetCachedToolUsageStats called
[1970-Jan-18 15:07:43.833911]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 15:07:48.634911]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 15:07:53.459733]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 15:07:58.956915]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 15:08:03.694512]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 15:08:09.151819]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 15:08:14.142273]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 15:08:19.357168]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 15:08:24.479893]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 15:08:29.672732]: Raw HES proceeding
[1970-Jan-18 15:08:29.689737]: Got raw val 24033, saturated: true
[1970-Jan-18 15:08:29.705266]: Returning HES
[1970-Jan-18 15:08:29.706941]: Sending back val 24033, saturated true
[1970-Jan-18 15:08:29.826090]: GetCachedToolUsageStats called
[1970-Jan-18 15:08:29.853705]: Toolhead Abort
[1970-Jan-18 15:08:29.859750]: aborting pru with shutdown=true
[1970-Jan-18 15:08:29.870857]: Last sync period had (0,0,9024411) buffer fulls due to suspend moves
[1970-Jan-18 15:08:29.872707]: Libstepper All Axis Abort
[1970-Jan-18 15:08:48.406883]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-18 15:08:48.408790]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 15:08:49.597755]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-18 15:08:49.828417]: GetCachedToolUsageStats called
[1970-Jan-18 15:09:02.718131]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 15:09:08.130797]: Raw HES proceeding
[1970-Jan-18 15:09:08.164002]: Got raw val 24037, saturated: true
[1970-Jan-18 15:09:08.178806]: Returning HES
[1970-Jan-18 15:09:08.181578]: Sending back val 24037, saturated true
[1970-Jan-18 15:09:08.277591]: GetCachedToolUsageStats called
[1970-Jan-18 15:09:08.302133]: Toolhead Abort
[1970-Jan-18 15:09:08.304072]: aborting pru with shutdown=true
[1970-Jan-18 15:09:08.306720]: Last sync period had (0,0,9025818) buffer fulls due to suspend moves
[1970-Jan-18 15:09:08.309186]: Libstepper All Axis Abort
[1970-Jan-18 15:09:17.762022]: Toolhead 0 state error: 80
[1970-Jan-18 15:09:54.088616]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-18 15:09:54.090607]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 15:09:56.617876]: GetCachedToolUsageStats called
[1970-Jan-18 15:09:57.165613]: GetCachedToolUsageStats called
[1970-Jan-18 15:09:57.615816]: GetCachedToolUsageStats called
[1970-Jan-18 15:09:59.106144]: GetCachedToolUsageStats called
[1970-Jan-18 15:10:00.709033]: GetCachedToolUsageStats called
[1970-Jan-18 15:10:02.216750]: GetCachedToolUsageStats called
[1970-Jan-18 15:10:03.854851]: GetCachedToolUsageStats called
[1970-Jan-18 15:10:05.232121]: GetCachedToolUsageStats called
[1970-Jan-18 15:10:06.698886]: GetCachedToolUsageStats called
[1970-Jan-18 15:10:08.397983]: GetCachedToolUsageStats called
[1970-Jan-18 15:10:37.289479]: Toolhead 0 state error: 54
[1970-Jan-18 15:10:37.291447]: Tool UID becomes 0.
[1970-Jan-18 15:35:49.507950]: GetCachedToolUsageStats called
[1970-Jan-18 15:35:49.999896]: GetCachedToolUsageStats called
[1970-Jan-18 15:35:54.938412]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 15:35:56.638678]: Toolhead Abort
[1970-Jan-18 15:35:56.640812]: aborting pru with shutdown=true
[1970-Jan-18 15:35:56.643456]: Last sync period had (0,0,9035427) buffer fulls due to suspend moves
[1970-Jan-18 15:35:56.645263]: Libstepper All Axis Abort
[1970-Jan-18 15:35:56.875032]: Toolhead 0 state error: 80
[1970-Jan-18 15:35:56.876807]: Checking tool eeprom version
[1970-Jan-18 15:35:56.878497]: Commanding tool usage stat retrieve
[1970-Jan-18 15:35:56.880374]: New tool uid 0xac97 attached, updating info cache
[1970-Jan-18 15:35:56.950397]: GetCachedToolUsageStats called
[1970-Jan-18 15:35:58.115664]: Connected tool has eepromv4
[1970-Jan-18 15:35:59.643449]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-18 15:36:01.269805]: GetCachedToolUsageStats called
[1970-Jan-18 15:36:01.495403]: GetCachedToolUsageStats called
[1970-Jan-18 15:36:01.825290]: GetCachedToolUsageStats called
[1970-Jan-18 15:36:03.332762]: GetCachedToolUsageStats called
[1970-Jan-18 15:36:04.825025]: GetCachedToolUsageStats called
[1970-Jan-18 15:36:15.932209]: Toolhead 0 state error: 0
[1970-Jan-18 15:36:19.376571]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-18 15:36:19.378498]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 15:36:20.577503]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-18 15:36:20.602600]: Toolhead 0 state error: 80
[1970-Jan-18 15:36:24.695761]: Toolhead 0 state error: 0
[1970-Jan-18 15:38:59.268820]: GetCachedToolUsageStats called
[1970-Jan-18 15:39:01.385785]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 15:39:05.961595]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 15:39:10.939455]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 15:39:15.642007]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 15:39:20.482689]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 15:39:24.923622]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 15:39:30.273938]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 15:39:34.656580]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 15:39:38.799157]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 15:39:44.222884]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 15:39:47.966911]:  wait for axis 0 full: false offset: 90 l3map offset:    90 status: 1 position 0 status count 1001
[1970-Jan-18 15:39:48.647160]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 15:39:52.081113]: Raw HES proceeding
[1970-Jan-18 15:39:52.152676]: Got raw val 24028, saturated: true
[1970-Jan-18 15:39:52.199922]: Returning HES
[1970-Jan-18 15:39:52.241181]: Sending back val 24028, saturated true
[1970-Jan-18 15:39:52.626987]: GetCachedToolUsageStats called
[1970-Jan-18 15:39:52.652214]: Toolhead Abort
[1970-Jan-18 15:39:52.653946]: aborting pru with shutdown=true
[1970-Jan-18 15:39:52.661333]: Last sync period had (0,0,9050304) buffer fulls due to suspend moves
[1970-Jan-18 15:39:52.663679]: Libstepper All Axis Abort
[1970-Jan-18 15:40:02.255829]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-18 15:40:02.257560]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 15:40:03.437211]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-18 15:40:16.058984]: GetCachedToolUsageStats called
[1970-Jan-18 15:40:17.194611]: Steps overrun! last 57531 and just got 2850
[1970-Jan-18 15:40:17.196321]: calculated 10854
[1970-Jan-18 15:40:20.229064]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 15:40:24.609909]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 15:40:30.004414]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 15:40:34.313736]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 15:40:39.253903]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 15:40:44.143614]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 15:40:48.540356]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 15:40:53.380778]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 15:40:58.276011]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 15:41:03.383496]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 15:41:05.312086]:  wait for axis 0 full: false offset: 90 l3map offset:    90 status: 1 position 0 status count 1001
[1970-Jan-18 15:41:08.827958]: Raw HES proceeding
[1970-Jan-18 15:41:08.844668]: Got raw val 24038, saturated: true
[1970-Jan-18 15:41:08.860934]: Returning HES
[1970-Jan-18 15:41:08.862627]: Sending back val 24038, saturated true
[1970-Jan-18 15:41:08.979334]: GetCachedToolUsageStats called
[1970-Jan-18 15:41:09.005108]: Toolhead Abort
[1970-Jan-18 15:41:09.007012]: aborting pru with shutdown=true
[1970-Jan-18 15:41:09.009643]: Last sync period had (0,0,9054708) buffer fulls due to suspend moves
[1970-Jan-18 15:41:09.011645]: Libstepper All Axis Abort
[1970-Jan-18 15:41:40.073553]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-18 15:41:40.075328]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 15:41:47.678189]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-18 15:41:47.679982]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 15:41:48.895025]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-18 15:41:49.012286]: GetCachedToolUsageStats called
[1970-Jan-18 15:42:00.641438]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 15:42:04.152982]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 15:42:06.892799]: Raw HES proceeding
[1970-Jan-18 15:42:06.908532]: Got raw val 24025, saturated: true
[1970-Jan-18 15:42:06.923894]: Returning HES
[1970-Jan-18 15:42:06.925543]: Sending back val 24025, saturated true
[1970-Jan-18 15:42:07.020829]: GetCachedToolUsageStats called
[1970-Jan-18 15:42:07.048378]: Toolhead Abort
[1970-Jan-18 15:42:07.050362]: aborting pru with shutdown=true
[1970-Jan-18 15:42:07.053307]: CLEAR BUFFER FAIL! in libstepper::Abort()
[1970-Jan-18 15:42:07.055864]: Last sync period had (0,0,9056358) buffer fulls due to suspend moves
[1970-Jan-18 15:42:07.058854]: Libstepper All Axis Abort
[1970-Jan-18 15:42:08.321806]: Toolhead 0 state error: 80
[1970-Jan-18 15:42:18.429382]: Toolhead 0 state error: 54
[1970-Jan-18 15:42:18.431323]: Tool UID becomes 0.
[1970-Jan-18 15:43:28.343553]: Checking tool eeprom version
[1970-Jan-18 15:43:28.345349]: Commanding tool usage stat retrieve
[1970-Jan-18 15:43:28.347029]: New tool uid 0xac97 attached, updating info cache
[1970-Jan-18 15:43:28.634393]: GetCachedToolUsageStats called
[1970-Jan-18 15:43:29.855637]: Toolhead 0 state error: 80
[1970-Jan-18 15:43:29.857337]: Connected tool has eepromv4
[1970-Jan-18 15:43:31.372179]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-18 15:43:35.567998]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-18 15:43:35.569909]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 15:43:36.782155]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-18 15:43:42.683428]: Toolhead 0 state error: 0
[1970-Jan-18 15:44:40.548112]: Toolhead 0 state error: 80
[1970-Jan-18 15:44:42.013144]: Toolhead 0 state error: 0
[1970-Jan-18 15:44:43.910963]: GetCachedToolUsageStats called
[1970-Jan-18 15:44:48.397769]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 15:44:53.197196]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 15:44:57.812769]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 15:45:02.411421]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 15:45:07.249016]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 15:45:11.603691]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 15:45:16.926144]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 15:45:21.246544]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 15:45:25.685062]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 15:45:29.285303]: Toolhead 0 state error: 54
[1970-Jan-18 15:45:29.287084]: Tool UID becomes 0.
[1970-Jan-18 15:45:31.194371]: Toolhead Abort
[1970-Jan-18 15:45:31.196293]: aborting pru with shutdown=true
[1970-Jan-18 15:45:31.199298]: Last sync period had (0,0,9064764) buffer fulls due to suspend moves
[1970-Jan-18 15:45:31.201376]: Libstepper All Axis Abort
[1970-Jan-18 15:45:31.388459]: Checking tool eeprom version
[1970-Jan-18 15:45:31.390347]: Commanding tool usage stat retrieve
[1970-Jan-18 15:45:31.393121]: New tool uid 0xac97 attached, updating info cache
[1970-Jan-18 15:45:31.528224]: GetCachedToolUsageStats called
[1970-Jan-18 15:45:32.340884]: Toolhead 0 state error: 0
[1970-Jan-18 15:45:32.342603]: Connected tool has eepromv4
[1970-Jan-18 15:45:32.347343]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-18 15:45:52.521598]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-18 15:45:52.524224]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 15:45:59.798969]: Last sync period had (0,0,9064965) buffer fulls due to suspend moves
[1970-Jan-18 15:45:59.800981]: Syncing turned false
[1970-Jan-18 15:45:59.802843]: Toolhead Abort
[1970-Jan-18 15:45:59.804555]: aborting pru with shutdown=true
[1970-Jan-18 15:45:59.808028]: Last sync period had (0,0,9064965) buffer fulls due to suspend moves
[1970-Jan-18 15:45:59.809796]: Libstepper All Axis Abort
[1970-Jan-18 15:45:59.817572]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-18 15:45:59.819336]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 15:45:59.821572]: Commanding tool usage stat retrieve
[1970-Jan-18 15:45:59.845194]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-18 15:45:59.861600]: Commanding tool usage stat retrieve
[1970-Jan-18 15:45:59.877310]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-18 15:46:08.624934]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-18 15:46:08.626733]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 15:46:09.816235]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-18 15:46:16.747846]: Raw HES proceeding
[1970-Jan-18 15:46:16.763000]: Got raw val 13854, saturated: false
[1970-Jan-18 15:46:16.807648]: Returning HES
[1970-Jan-18 15:46:16.809352]: Sending back val 13854, saturated false
[1970-Jan-18 15:46:16.906134]: GetCachedToolUsageStats called
[1970-Jan-18 15:46:16.936056]: Toolhead Abort
[1970-Jan-18 15:46:16.937840]: aborting pru with shutdown=true
[1970-Jan-18 15:46:16.940636]: Last sync period had (0,0,9065589) buffer fulls due to suspend moves
[1970-Jan-18 15:46:16.943539]: Libstepper All Axis Abort
[1970-Jan-18 15:46:20.326171]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-18 15:46:20.327980]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 15:46:21.529991]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-18 15:46:57.880649]: GetCachedToolUsageStats called
[1970-Jan-18 15:47:05.552833]: Toolhead 0 state error: 80
[1970-Jan-18 15:47:10.318632]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 15:47:11.485831]:  wait for axis 0 full: false offset: 72 l3map offset:    72 status: 1 position 0 status count 1001
[1970-Jan-18 15:47:14.062825]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 15:47:15.876336]: Raw HES proceeding
[1970-Jan-18 15:47:15.904816]: HES not updated!
[1970-Jan-18 15:47:15.934910]: HES not updated!
[1970-Jan-18 15:47:15.949363]: Got raw val 17249, saturated: false
[1970-Jan-18 15:47:15.966023]: Returning HES
[1970-Jan-18 15:47:15.971094]: Sending back val 17249, saturated false
[1970-Jan-18 15:47:16.063470]: GetCachedToolUsageStats called
[1970-Jan-18 15:47:16.089466]: Toolhead Abort
[1970-Jan-18 15:47:16.091456]: aborting pru with shutdown=true
[1970-Jan-18 15:47:16.094105]: Last sync period had (0,0,9069702) buffer fulls due to suspend moves
[1970-Jan-18 15:47:16.095866]: Libstepper All Axis Abort
[1970-Jan-18 15:47:45.178006]: Toolhead 0 state error: 0
[1970-Jan-18 15:47:46.183934]: Toolhead 0 state error: 80
[1970-Jan-18 15:47:48.198040]: Toolhead 0 state error: 0
[1970-Jan-18 15:48:09.920257]: Toolhead 0 state error: 80
[1970-Jan-18 15:48:15.999042]: Toolhead 0 state error: 0
[1970-Jan-18 15:49:48.738865]: Toolhead 0 state error: 80
[1970-Jan-18 15:49:54.817143]: Toolhead 0 state error: 54
[1970-Jan-18 15:49:54.819928]: Tool UID becomes 0.
[1970-Jan-18 15:53:44.249296]: Checking tool eeprom version
[1970-Jan-18 15:53:44.251310]: Commanding tool usage stat retrieve
[1970-Jan-18 15:53:44.253187]: New tool uid 0xac97 attached, updating info cache
[1970-Jan-18 15:53:44.337680]: GetCachedToolUsageStats called
[1970-Jan-18 15:53:45.757196]: Toolhead 0 state error: 80
[1970-Jan-18 15:53:45.763556]: Connected tool has eepromv4
[1970-Jan-18 15:53:47.271157]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-18 15:53:47.673302]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-18 15:53:47.675182]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 15:53:48.865768]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-18 15:54:02.816913]: Toolhead 0 state error: 0
[1970-Jan-18 15:54:10.863582]: Toolhead 0 state error: 80
[1970-Jan-18 15:54:21.735661]: Toolhead 0 state error: 0
[1970-Jan-18 15:54:26.816664]: Toolhead 0 state error: 54
[1970-Jan-18 15:54:26.818413]: Tool UID becomes 0.
[1970-Jan-18 15:54:27.061194]: Toolhead Abort
[1970-Jan-18 15:54:27.063106]: aborting pru with shutdown=true
[1970-Jan-18 15:54:27.065735]: Last sync period had (0,0,9074817) buffer fulls due to suspend moves
[1970-Jan-18 15:54:27.067506]: Libstepper All Axis Abort
[1970-Jan-18 16:01:32.556626]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-18 16:01:32.559053]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 16:01:36.783770]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:01:37.027453]: Toolhead Abort
[1970-Jan-18 16:01:37.029234]: aborting pru with shutdown=true
[1970-Jan-18 16:01:37.038295]: Last sync period had (0,0,9077562) buffer fulls due to suspend moves
[1970-Jan-18 16:01:37.040278]: Libstepper All Axis Abort
[1970-Jan-18 16:01:39.267774]: Checking tool eeprom version
[1970-Jan-18 16:01:39.269493]: Commanding tool usage stat retrieve
[1970-Jan-18 16:01:39.271430]: New tool uid 0xac97 attached, updating info cache
[1970-Jan-18 16:01:39.343072]: GetCachedToolUsageStats called
[1970-Jan-18 16:01:40.776732]: Toolhead 0 state error: 80
[1970-Jan-18 16:01:40.778616]: Connected tool has eepromv4
[1970-Jan-18 16:01:42.286127]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-18 16:01:43.382143]: Last sync period had (0,0,9077625) buffer fulls due to suspend moves
[1970-Jan-18 16:01:43.384005]: Syncing turned false
[1970-Jan-18 16:01:43.385777]: Toolhead Abort
[1970-Jan-18 16:01:43.387649]: aborting pru with shutdown=true
[1970-Jan-18 16:01:43.390305]: Last sync period had (0,0,9077625) buffer fulls due to suspend moves
[1970-Jan-18 16:01:43.392102]: Libstepper All Axis Abort
[1970-Jan-18 16:01:43.393843]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-18 16:01:43.396607]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 16:01:43.398506]: Commanding tool usage stat retrieve
[1970-Jan-18 16:01:43.431704]: Commanding tool usage stat retrieve
[1970-Jan-18 16:01:43.460600]: Commanding tool usage stat retrieve
[1970-Jan-18 16:01:43.489786]: Commanding tool usage stat retrieve
[1970-Jan-18 16:01:46.393767]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-18 16:01:47.908585]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-18 16:01:49.418417]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-18 16:01:50.927697]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-18 16:02:07.077064]: Toolhead 0 state error: 0
[1970-Jan-18 16:02:08.091298]: Toolhead 0 state error: 80
[1970-Jan-18 16:02:14.159919]: Toolhead 0 state error: 0
[1970-Jan-18 16:02:17.187483]: Toolhead 0 state error: 80
[1970-Jan-18 16:02:23.033294]: Toolhead 0 state error: 0
[1970-Jan-18 16:02:23.127188]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-18 16:02:23.129770]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 16:02:24.335308]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-18 16:02:25.448615]: Toolhead 0 state error: 80
[1970-Jan-18 16:02:33.862358]: Toolhead 0 state error: 0
[1970-Jan-18 16:02:56.309311]: Toolhead 0 state error: 80
[1970-Jan-18 16:02:57.551645]: Toolhead 0 state error: 0
[1970-Jan-18 16:04:45.046654]: GetCachedToolUsageStats called
[1970-Jan-18 16:04:50.153202]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 16:04:54.992630]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 16:04:57.632667]: Toolhead 0 state error: 80
[1970-Jan-18 16:04:59.824193]: GetCachedToolUsageStats called
[1970-Jan-18 16:04:59.852159]: Toolhead Abort
[1970-Jan-18 16:04:59.853915]: aborting pru with shutdown=true
[1970-Jan-18 16:04:59.856602]: Last sync period had (0,0,9088767) buffer fulls due to suspend moves
[1970-Jan-18 16:04:59.858526]: Libstepper All Axis Abort
[1970-Jan-18 16:05:00.475422]: GetCachedToolUsageStats called
[1970-Jan-18 16:05:01.909990]: Toolhead 0 state error: 0
[1970-Jan-18 16:05:12.601952]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:05:16.690430]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:05:21.626627]: Raw HES proceeding
[1970-Jan-18 16:05:21.643169]: Got raw val 24009, saturated: true
[1970-Jan-18 16:05:21.658431]: Returning HES
[1970-Jan-18 16:05:21.660417]: Sending back val 24009, saturated true
[1970-Jan-18 16:05:21.759224]: GetCachedToolUsageStats called
[1970-Jan-18 16:05:21.784689]: Toolhead Abort
[1970-Jan-18 16:05:21.786438]: aborting pru with shutdown=true
[1970-Jan-18 16:05:21.789139]: Last sync period had (0,0,9090438) buffer fulls due to suspend moves
[1970-Jan-18 16:05:21.791117]: Libstepper All Axis Abort
[1970-Jan-18 16:05:23.400824]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-18 16:05:23.402719]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 16:05:24.604372]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-18 16:05:24.765275]: GetCachedToolUsageStats called
[1970-Jan-18 16:05:26.386626]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 16:05:31.716185]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 16:05:37.073440]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 16:05:41.798358]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 16:05:42.882112]: Steps overrun! last 61466 and just got 15469
[1970-Jan-18 16:05:42.883848]: calculated 19538
[1970-Jan-18 16:05:46.290254]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:05:51.474541]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:05:55.883532]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:06:00.919763]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:06:05.511294]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:06:09.813684]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:06:14.529376]:  wait for axis 0 full: false offset: 90 l3map offset:    90 status: 1 position 0 status count 1001
[1970-Jan-18 16:06:14.616739]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:06:16.343454]: Raw HES proceeding
[1970-Jan-18 16:06:16.368033]: Got raw val 24027, saturated: true
[1970-Jan-18 16:06:16.711056]: Returning HES
[1970-Jan-18 16:06:16.712893]: Sending back val 24027, saturated true
[1970-Jan-18 16:06:16.843929]: GetCachedToolUsageStats called
[1970-Jan-18 16:06:16.874326]: Toolhead Abort
[1970-Jan-18 16:06:16.876100]: aborting pru with shutdown=true
[1970-Jan-18 16:06:16.878869]: Last sync period had (0,0,9093783) buffer fulls due to suspend moves
[1970-Jan-18 16:06:16.880845]: Libstepper All Axis Abort
[1970-Jan-18 16:06:30.076446]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-18 16:06:30.078257]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 16:06:31.258751]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-18 16:06:31.400616]: GetCachedToolUsageStats called
[1970-Jan-18 16:06:46.379476]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:06:49.341102]: Toolhead 0 state error: 80
[1970-Jan-18 16:06:49.437115]: Raw HES proceeding
[1970-Jan-18 16:06:49.465920]: HES not updated!
[1970-Jan-18 16:06:49.497602]: HES not updated!
[1970-Jan-18 16:06:49.513695]: Got raw val 24010, saturated: true
[1970-Jan-18 16:06:49.529432]: Returning HES
[1970-Jan-18 16:06:49.531745]: Sending back val 24010, saturated true
[1970-Jan-18 16:06:49.629403]: GetCachedToolUsageStats called
[1970-Jan-18 16:06:49.655135]: Toolhead Abort
[1970-Jan-18 16:06:49.657041]: aborting pru with shutdown=true
[1970-Jan-18 16:06:49.659995]: Last sync period had (0,0,9095265) buffer fulls due to suspend moves
[1970-Jan-18 16:06:49.661936]: Libstepper All Axis Abort
[1970-Jan-18 16:09:37.508834]: Toolhead 0 state error: 56
[1970-Jan-18 16:09:39.523645]: Toolhead 0 state error: 80
[1970-Jan-18 16:19:02.551995]: Toolhead 0 state error: 54
[1970-Jan-18 16:19:02.553737]: Tool UID becomes 0.
[1970-Jan-18 16:27:38.527748]: Checking tool eeprom version
[1970-Jan-18 16:27:38.529423]: Commanding tool usage stat retrieve
[1970-Jan-18 16:27:38.531470]: New tool uid 0xac97 attached, updating info cache
[1970-Jan-18 16:27:38.596000]: GetCachedToolUsageStats called
[1970-Jan-18 16:27:40.038573]: Toolhead 0 state error: 80
[1970-Jan-18 16:27:40.040507]: Connected tool has eepromv4
[1970-Jan-18 16:27:41.548584]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-18 16:27:43.399945]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-18 16:27:43.402053]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 16:27:44.592695]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-18 16:27:45.338814]: bronx lowest mem space: 0x34a bytes
[1970-Jan-18 16:30:13.128509]: Toolhead 0 state error: 0
[1970-Jan-18 16:30:22.363323]: Toolhead 0 state error: 80
[1970-Jan-18 16:30:22.987832]: Toolhead 0 state error: 0
[1970-Jan-18 16:30:25.755480]: Toolhead 0 state error: 80
[1970-Jan-18 16:30:28.364934]: Toolhead 0 state error: 0
[1970-Jan-18 16:30:30.042548]: Toolhead 0 state error: 80
[1970-Jan-18 16:30:31.462901]: GetCachedToolUsageStats called
[1970-Jan-18 16:30:34.263043]: Toolhead 0 state error: 0
[1970-Jan-18 16:30:35.940714]: Toolhead 0 state error: 80
[1970-Jan-18 16:30:36.075400]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 16:30:37.696429]: Toolhead 0 state error: 0
[1970-Jan-18 16:30:41.066596]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 16:30:45.528050]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 16:30:50.772736]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:30:55.216641]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:30:59.632022]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:31:04.828900]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:31:09.502026]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:31:11.872464]: Toolhead 0 state error: 80
[1970-Jan-18 16:31:14.483633]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:31:14.502221]: Toolhead 0 state error: 0
[1970-Jan-18 16:31:19.489070]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:31:19.538141]: Toolhead 0 state error: 80
[1970-Jan-18 16:31:21.436968]:  wait for axis 0 full: false offset: 90 l3map offset:    90 status: 1 position 0 status count 1001
[1970-Jan-18 16:31:22.222191]: Toolhead 0 state error: 0
[1970-Jan-18 16:31:24.254170]: Raw HES proceeding
[1970-Jan-18 16:31:24.272422]: Got raw val 24031, saturated: true
[1970-Jan-18 16:31:24.288069]: Returning HES
[1970-Jan-18 16:31:24.289740]: Sending back val 24031, saturated true
[1970-Jan-18 16:31:24.407060]: GetCachedToolUsageStats called
[1970-Jan-18 16:31:24.432464]: Toolhead Abort
[1970-Jan-18 16:31:24.434201]: aborting pru with shutdown=true
[1970-Jan-18 16:31:24.436883]: Last sync period had (0,0,9117861) buffer fulls due to suspend moves
[1970-Jan-18 16:31:24.438888]: Libstepper All Axis Abort
[1970-Jan-18 16:31:26.286641]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-18 16:31:26.288409]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 16:31:27.481926]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-18 16:31:41.631935]: GetCachedToolUsageStats called
[1970-Jan-18 16:31:44.761353]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 16:31:49.781069]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 16:31:54.495738]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 16:31:59.402546]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 16:31:59.826438]: Steps overrun! last 59974 and just got 5293
[1970-Jan-18 16:31:59.828130]: calculated 10854
[1970-Jan-18 16:32:04.206930]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:32:09.582611]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:32:13.823333]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:32:15.787770]: Toolhead 0 state error: 80
[1970-Jan-18 16:32:18.083699]: GetCachedToolUsageStats called
[1970-Jan-18 16:32:18.148023]: Toolhead Abort
[1970-Jan-18 16:32:18.149806]: aborting pru with shutdown=true
[1970-Jan-18 16:32:18.160978]: Last sync period had (0,0,9121230) buffer fulls due to suspend moves
[1970-Jan-18 16:32:18.162776]: Libstepper All Axis Abort
[1970-Jan-18 16:32:18.431867]: GetCachedToolUsageStats called
[1970-Jan-18 16:32:19.761011]: Toolhead 0 state error: 0
[1970-Jan-18 16:32:30.865846]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:32:34.858195]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:32:39.290517]: Toolhead 0 state error: 54
[1970-Jan-18 16:32:39.292269]: Tool UID becomes 0.
[1970-Jan-18 16:32:39.455961]: Toolhead Abort
[1970-Jan-18 16:32:39.457741]: aborting pru with shutdown=true
[1970-Jan-18 16:32:39.460394]: Last sync period had (0,0,9122784) buffer fulls due to suspend moves
[1970-Jan-18 16:32:39.462290]: Libstepper All Axis Abort
[1970-Jan-18 16:33:36.996304]: Checking tool eeprom version
[1970-Jan-18 16:33:36.998127]: Commanding tool usage stat retrieve
[1970-Jan-18 16:33:36.999777]: New tool uid 0xac97 attached, updating info cache
[1970-Jan-18 16:33:37.069885]: GetCachedToolUsageStats called
[1970-Jan-18 16:33:38.518237]: Toolhead 0 state error: 80
[1970-Jan-18 16:33:38.519969]: Connected tool has eepromv4
[1970-Jan-18 16:33:40.041897]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-18 16:33:51.607477]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-18 16:33:51.609252]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 16:33:52.788304]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-18 16:34:03.612864]: Toolhead 0 state error: 0
[1970-Jan-18 16:34:52.992263]: Toolhead 0 state error: 80
[1970-Jan-18 16:34:58.042298]: Toolhead 0 state error: 0
[1970-Jan-18 16:35:00.955717]: GetCachedToolUsageStats called
[1970-Jan-18 16:35:04.722451]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 16:35:09.672729]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 16:35:09.721852]: Toolhead 0 state error: 80
[1970-Jan-18 16:35:11.865441]: GetCachedToolUsageStats called
[1970-Jan-18 16:35:11.893156]: Toolhead Abort
[1970-Jan-18 16:35:11.895015]: aborting pru with shutdown=true
[1970-Jan-18 16:35:11.897691]: Last sync period had (0,0,9128787) buffer fulls due to suspend moves
[1970-Jan-18 16:35:11.899650]: Libstepper All Axis Abort
[1970-Jan-18 16:35:12.138779]: GetCachedToolUsageStats called
[1970-Jan-18 16:35:13.306141]: Toolhead 0 state error: 0
[1970-Jan-18 16:35:26.756478]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:35:30.149641]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:35:33.357682]: Raw HES proceeding
[1970-Jan-18 16:35:33.376243]: Got raw val 24022, saturated: true
[1970-Jan-18 16:35:33.391220]: Returning HES
[1970-Jan-18 16:35:33.393344]: Sending back val 24022, saturated true
[1970-Jan-18 16:35:33.492508]: GetCachedToolUsageStats called
[1970-Jan-18 16:35:33.516866]: Toolhead Abort
[1970-Jan-18 16:35:33.518642]: aborting pru with shutdown=true
[1970-Jan-18 16:35:33.521936]: Last sync period had (0,0,9130461) buffer fulls due to suspend moves
[1970-Jan-18 16:35:33.523731]: Libstepper All Axis Abort
[1970-Jan-18 16:35:34.792780]: Toolhead 0 state error: 80
[1970-Jan-18 16:35:35.335623]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-18 16:35:35.337495]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 16:35:36.567084]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-18 16:35:36.788078]: GetCachedToolUsageStats called
[1970-Jan-18 16:35:43.681645]: Toolhead 0 state error: 0
[1970-Jan-18 16:35:50.859425]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:35:54.835033]: Raw HES proceeding
[1970-Jan-18 16:35:54.851520]: Got raw val 24027, saturated: true
[1970-Jan-18 16:35:54.866523]: Returning HES
[1970-Jan-18 16:35:54.868651]: Sending back val 24027, saturated true
[1970-Jan-18 16:35:54.962650]: GetCachedToolUsageStats called
[1970-Jan-18 16:35:54.988059]: Toolhead Abort
[1970-Jan-18 16:35:54.989820]: aborting pru with shutdown=true
[1970-Jan-18 16:35:54.992749]: Last sync period had (0,0,9131778) buffer fulls due to suspend moves
[1970-Jan-18 16:35:54.994504]: Libstepper All Axis Abort
[1970-Jan-18 16:35:59.855607]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-18 16:35:59.857401]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 16:36:01.096421]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-18 16:36:16.755727]: GetCachedToolUsageStats called
[1970-Jan-18 16:36:20.468386]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 16:36:25.645823]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 16:36:25.750793]: Toolhead 0 state error: 80
[1970-Jan-18 16:36:27.885254]: GetCachedToolUsageStats called
[1970-Jan-18 16:36:27.949924]: Toolhead Abort
[1970-Jan-18 16:36:27.961957]: aborting pru with shutdown=true
[1970-Jan-18 16:36:27.970856]: Last sync period had (0,0,9133491) buffer fulls due to suspend moves
[1970-Jan-18 16:36:27.973122]: Libstepper All Axis Abort
[1970-Jan-18 16:36:28.373484]: GetCachedToolUsageStats called
[1970-Jan-18 16:36:43.039754]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:36:44.853172]: Toolhead 0 state error: 54
[1970-Jan-18 16:36:44.854908]: Tool UID becomes 0.
[1970-Jan-18 16:36:46.728997]: Toolhead Abort
[1970-Jan-18 16:36:46.731145]: aborting pru with shutdown=true
[1970-Jan-18 16:36:46.733862]: Last sync period had (0,0,9134754) buffer fulls due to suspend moves
[1970-Jan-18 16:36:46.735663]: Libstepper All Axis Abort
[1970-Jan-18 16:37:05.551260]: Checking tool eeprom version
[1970-Jan-18 16:37:05.553067]: Commanding tool usage stat retrieve
[1970-Jan-18 16:37:05.555699]: New tool uid 0xac97 attached, updating info cache
[1970-Jan-18 16:37:05.626365]: GetCachedToolUsageStats called
[1970-Jan-18 16:37:07.062948]: Toolhead 0 state error: 80
[1970-Jan-18 16:37:07.064702]: Connected tool has eepromv4
[1970-Jan-18 16:37:08.042496]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-18 16:37:08.061511]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-18 16:37:08.065261]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 16:37:22.073052]: Last sync period had (0,0,9134994) buffer fulls due to suspend moves
[1970-Jan-18 16:37:22.074886]: Syncing turned false
[1970-Jan-18 16:37:22.076773]: Toolhead Abort
[1970-Jan-18 16:37:22.078513]: aborting pru with shutdown=true
[1970-Jan-18 16:37:22.081307]: Last sync period had (0,0,9134994) buffer fulls due to suspend moves
[1970-Jan-18 16:37:22.083228]: Libstepper All Axis Abort
[1970-Jan-18 16:37:22.084873]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-18 16:37:22.086904]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 16:37:22.088875]: Commanding tool usage stat retrieve
[1970-Jan-18 16:37:22.118046]: Commanding tool usage stat retrieve
[1970-Jan-18 16:37:26.353121]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-18 16:37:27.879293]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-18 16:37:28.408315]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-18 16:37:28.410284]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 16:37:29.615626]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-18 16:37:32.556992]: Toolhead 0 state error: 0
[1970-Jan-18 16:37:36.516254]: Toolhead 0 state error: 80
[1970-Jan-18 16:37:40.334296]: Toolhead 0 state error: 0
[1970-Jan-18 16:37:47.646536]: Toolhead 0 state error: 80
[1970-Jan-18 16:37:50.270922]: Toolhead 0 state error: 0
[1970-Jan-18 16:38:22.668142]: GetCachedToolUsageStats called
[1970-Jan-18 16:38:26.633747]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 16:38:32.456018]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 16:38:37.148105]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 16:38:43.742344]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:38:48.074291]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:38:53.282561]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:38:58.175852]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:39:01.002280]:  wait for axis 0 full: false offset: 90 l3map offset:    90 status: 1 position 0 status count 1001
[1970-Jan-18 16:39:02.603708]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:39:03.514025]: Toolhead 0 state error: 80
[1970-Jan-18 16:39:05.608949]: GetCachedToolUsageStats called
[1970-Jan-18 16:39:05.639057]: Toolhead Abort
[1970-Jan-18 16:39:05.641051]: aborting pru with shutdown=true
[1970-Jan-18 16:39:05.643660]: Last sync period had (0,0,9141474) buffer fulls due to suspend moves
[1970-Jan-18 16:39:05.645555]: Libstepper All Axis Abort
[1970-Jan-18 16:39:06.654159]: GetCachedToolUsageStats called
[1970-Jan-18 16:39:08.004685]: Toolhead 0 state error: 0
[1970-Jan-18 16:39:20.180278]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:39:23.875608]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:39:27.768118]: Raw HES proceeding
[1970-Jan-18 16:39:27.785443]: Got raw val 14992, saturated: false
[1970-Jan-18 16:39:27.800827]: Returning HES
[1970-Jan-18 16:39:27.802496]: Sending back val 14992, saturated false
[1970-Jan-18 16:39:27.897747]: GetCachedToolUsageStats called
[1970-Jan-18 16:39:27.922538]: Toolhead Abort
[1970-Jan-18 16:39:27.924326]: aborting pru with shutdown=true
[1970-Jan-18 16:39:27.927009]: Last sync period had (0,0,9143124) buffer fulls due to suspend moves
[1970-Jan-18 16:39:27.928764]: Libstepper All Axis Abort
[1970-Jan-18 16:39:30.410760]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-18 16:39:30.412524]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 16:39:31.613962]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-18 16:39:31.756234]: GetCachedToolUsageStats called
[1970-Jan-18 16:39:34.230353]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 16:39:39.350673]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 16:39:44.142289]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 16:39:48.863383]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 16:39:54.292251]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:39:58.547501]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:40:02.785325]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:40:08.412751]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:40:12.842725]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:40:17.648163]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:40:20.587244]:  wait for axis 0 full: false offset: 90 l3map offset:    90 status: 1 position 0 status count 1001
[1970-Jan-18 16:40:22.040399]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:40:24.545743]: Raw HES proceeding
[1970-Jan-18 16:40:24.569972]: Got raw val 14152, saturated: false
[1970-Jan-18 16:40:24.586306]: Returning HES
[1970-Jan-18 16:40:24.588001]: Sending back val 14152, saturated false
[1970-Jan-18 16:40:24.701592]: GetCachedToolUsageStats called
[1970-Jan-18 16:40:24.726544]: Toolhead Abort
[1970-Jan-18 16:40:24.728569]: aborting pru with shutdown=true
[1970-Jan-18 16:40:24.732232]: Last sync period had (0,0,9146598) buffer fulls due to suspend moves
[1970-Jan-18 16:40:24.733994]: Libstepper All Axis Abort
[1970-Jan-18 16:40:35.785226]: Toolhead 0 state error: 54
[1970-Jan-18 16:40:35.786962]: Tool UID becomes 0.
[1970-Jan-18 16:42:03.900261]: Checking tool eeprom version
[1970-Jan-18 16:42:03.901965]: Commanding tool usage stat retrieve
[1970-Jan-18 16:42:03.903614]: New tool uid 0xac97 attached, updating info cache
[1970-Jan-18 16:42:03.969235]: GetCachedToolUsageStats called
[1970-Jan-18 16:42:05.419280]: Toolhead 0 state error: 0
[1970-Jan-18 16:42:05.421291]: Connected tool has eepromv4
[1970-Jan-18 16:42:05.425596]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-18 16:43:25.218513]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-18 16:43:25.220513]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 16:43:26.415563]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-18 16:45:22.216010]: GetCachedToolUsageStats called
[1970-Jan-18 16:45:23.402860]: Steps overrun! last 62824 and just got 8143
[1970-Jan-18 16:45:23.405143]: calculated 10854
[1970-Jan-18 16:45:28.382865]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 16:45:32.660752]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 16:45:37.688362]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 16:45:42.473489]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:45:46.748652]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:45:51.580916]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:45:56.379464]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:46:01.277694]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:46:05.655854]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:46:10.495266]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:46:11.238587]:  wait for axis 0 full: false offset: 90 l3map offset:    90 status: 1 position 0 status count 1001
[1970-Jan-18 16:46:15.001077]: Raw HES proceeding
[1970-Jan-18 16:46:15.018213]: Got raw val 3768, saturated: false
[1970-Jan-18 16:46:15.034658]: Returning HES
[1970-Jan-18 16:46:15.036331]: Sending back val 3768, saturated false
[1970-Jan-18 16:46:15.149768]: GetCachedToolUsageStats called
[1970-Jan-18 16:46:15.174094]: Toolhead Abort
[1970-Jan-18 16:46:15.175852]: aborting pru with shutdown=true
[1970-Jan-18 16:46:15.178856]: Last sync period had (0,0,9159327) buffer fulls due to suspend moves
[1970-Jan-18 16:46:15.180795]: Libstepper All Axis Abort
[1970-Jan-18 16:46:23.755587]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-18 16:46:23.757344]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 16:46:24.941027]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-18 16:46:25.086785]: GetCachedToolUsageStats called
[1970-Jan-18 16:46:37.971154]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 16:46:42.912079]: Toolhead 0 state error: 80
[1970-Jan-18 16:46:42.993708]: Raw HES proceeding
[1970-Jan-18 16:46:43.024431]: HES not updated!
[1970-Jan-18 16:46:43.054307]: HES not updated!
[1970-Jan-18 16:46:43.069464]: Got raw val 10445, saturated: false
[1970-Jan-18 16:46:43.085351]: Returning HES
[1970-Jan-18 16:46:43.087180]: Sending back val 10445, saturated false
[1970-Jan-18 16:46:43.184040]: GetCachedToolUsageStats called
[1970-Jan-18 16:46:43.209320]: Toolhead Abort
[1970-Jan-18 16:46:43.211306]: aborting pru with shutdown=true
[1970-Jan-18 16:46:43.213863]: Last sync period had (0,0,9160836) buffer fulls due to suspend moves
[1970-Jan-18 16:46:43.215732]: Libstepper All Axis Abort
[1970-Jan-18 16:46:53.552284]: Toolhead 0 state error: 54
[1970-Jan-18 16:46:53.554048]: Tool UID becomes 0.
[1970-Jan-18 16:57:25.891140]: Checking tool eeprom version
[1970-Jan-18 16:57:25.892975]: Commanding tool usage stat retrieve
[1970-Jan-18 16:57:25.894664]: New tool uid 0xac97 attached, updating info cache
[1970-Jan-18 16:57:25.960562]: GetCachedToolUsageStats called
[1970-Jan-18 16:57:27.412365]: Toolhead 0 state error: 80
[1970-Jan-18 16:57:27.414262]: Connected tool has eepromv4
[1970-Jan-18 16:57:28.919006]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-18 16:57:30.171437]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-18 16:57:30.173381]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 16:57:31.356272]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-18 16:58:14.606807]: Toolhead 0 state error: 0
[1970-Jan-18 16:58:16.864452]: Toolhead 0 state error: 80
[1970-Jan-18 16:58:23.408176]: Toolhead 0 state error: 0
[1970-Jan-18 16:58:33.642368]: Toolhead 0 state error: 80
[1970-Jan-18 16:59:42.498224]: Toolhead 0 state error: 0
[1970-Jan-18 16:59:57.427610]: GetCachedToolUsageStats called
[1970-Jan-18 16:59:58.816336]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 17:00:04.208947]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 17:00:08.685597]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 17:00:13.412066]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 17:00:18.294161]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 17:00:19.416022]: Toolhead 0 state error: 80
[1970-Jan-18 17:00:21.529515]: GetCachedToolUsageStats called
[1970-Jan-18 17:00:21.556960]: Toolhead Abort
[1970-Jan-18 17:00:21.558884]: aborting pru with shutdown=true
[1970-Jan-18 17:00:21.561976]: Last sync period had (0,0,9176316) buffer fulls due to suspend moves
[1970-Jan-18 17:00:21.563809]: Libstepper All Axis Abort
[1970-Jan-18 17:00:21.826808]: GetCachedToolUsageStats called
[1970-Jan-18 17:00:35.116764]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 17:00:39.240763]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 17:00:42.833732]: Raw HES proceeding
[1970-Jan-18 17:00:42.863886]: HES not updated!
[1970-Jan-18 17:00:42.896584]: HES not updated!
[1970-Jan-18 17:00:42.930955]: Got raw val 21735, saturated: true
[1970-Jan-18 17:00:42.961640]: Returning HES
[1970-Jan-18 17:00:42.963342]: Sending back val 21735, saturated true
[1970-Jan-18 17:00:43.155221]: GetCachedToolUsageStats called
[1970-Jan-18 17:00:43.197593]: Toolhead Abort
[1970-Jan-18 17:00:43.199383]: aborting pru with shutdown=true
[1970-Jan-18 17:00:43.220912]: Last sync period had (0,0,9177873) buffer fulls due to suspend moves
[1970-Jan-18 17:00:43.222862]: Libstepper All Axis Abort
[1970-Jan-18 17:00:45.832435]: Toolhead 0 state error: 0
[1970-Jan-18 17:00:47.083416]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-18 17:00:47.085209]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 17:00:48.271917]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-18 17:00:48.414979]: GetCachedToolUsageStats called
[1970-Jan-18 17:00:52.271549]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 17:00:57.305277]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 17:01:02.171830]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 17:01:06.519038]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 17:01:11.745467]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 17:01:16.347902]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 17:01:20.394758]: Toolhead 0 state error: 54
[1970-Jan-18 17:01:20.396511]: Tool UID becomes 0.
[1970-Jan-18 17:01:22.256463]: Toolhead Abort
[1970-Jan-18 17:01:22.258335]: aborting pru with shutdown=true
[1970-Jan-18 17:01:22.261084]: Last sync period had (0,0,9180042) buffer fulls due to suspend moves
[1970-Jan-18 17:01:22.263252]: Libstepper All Axis Abort
[1970-Jan-18 17:03:04.018686]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-18 17:03:04.020697]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 17:03:08.036218]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 17:03:09.154888]: Toolhead 0 state error: 0
[1970-Jan-18 17:03:09.156797]: Checking tool eeprom version
[1970-Jan-18 17:03:09.158561]: Commanding tool usage stat retrieve
[1970-Jan-18 17:03:09.170519]: New tool uid 0xac97 attached, updating info cache
[1970-Jan-18 17:03:09.176279]: Connected tool has eepromv4
[1970-Jan-18 17:03:09.183419]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-18 17:03:09.246653]: GetCachedToolUsageStats called
[1970-Jan-18 17:03:09.283449]: Last sync period had (0,0,9180789) buffer fulls due to suspend moves
[1970-Jan-18 17:03:09.285455]: Syncing turned false
[1970-Jan-18 17:03:09.290962]: Toolhead Abort
[1970-Jan-18 17:03:09.292808]: aborting pru with shutdown=true
[1970-Jan-18 17:03:09.300877]: Last sync period had (0,0,9180789) buffer fulls due to suspend moves
[1970-Jan-18 17:03:09.303341]: Libstepper All Axis Abort
[1970-Jan-18 17:03:09.305015]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-18 17:03:09.306779]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 17:03:09.308839]: Commanding tool usage stat retrieve
[1970-Jan-18 17:03:09.342394]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-18 17:03:09.362411]: Commanding tool usage stat retrieve
[1970-Jan-18 17:03:09.377945]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-18 17:03:17.867755]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-18 17:03:17.869567]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 17:03:19.061273]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-18 17:04:34.170991]: GetCachedToolUsageStats called
[1970-Jan-18 17:04:35.377717]: Steps overrun! last 63503 and just got 8822
[1970-Jan-18 17:04:35.379427]: calculated 10854
[1970-Jan-18 17:04:38.078792]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 17:04:43.623703]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 17:04:48.124339]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 17:04:53.067760]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 17:04:58.081264]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 17:05:02.579707]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 17:05:07.485497]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 17:05:10.736581]: Raw HES proceeding
[1970-Jan-18 17:05:10.759375]: Got raw val 23836, saturated: true
[1970-Jan-18 17:05:10.850902]: Returning HES
[1970-Jan-18 17:05:10.852584]: Sending back val 23836, saturated true
[1970-Jan-18 17:05:10.971210]: GetCachedToolUsageStats called
[1970-Jan-18 17:05:10.996556]: Toolhead Abort
[1970-Jan-18 17:05:10.998351]: aborting pru with shutdown=true
[1970-Jan-18 17:05:11.001274]: Last sync period had (0,0,9188538) buffer fulls due to suspend moves
[1970-Jan-18 17:05:11.003052]: Libstepper All Axis Abort
[1970-Jan-18 17:05:50.069717]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-18 17:05:50.071926]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 17:05:51.282214]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-18 17:05:51.447460]: GetCachedToolUsageStats called
[1970-Jan-18 17:05:56.750623]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 17:06:02.147666]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 17:06:06.678682]:  wait for axis 0 full: false offset: 54 l3map offset:    90 status: 1 position 0 status count 1001
[1970-Jan-18 17:06:06.974517]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 17:06:13.609025]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 17:06:19.420231]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 17:06:26.657901]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 17:06:32.308708]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 17:06:38.637527]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 17:06:44.368303]: Raw HES proceeding
[1970-Jan-18 17:06:44.385077]: Got raw val 23867, saturated: true
[1970-Jan-18 17:06:44.413525]: Returning HES
[1970-Jan-18 17:06:44.415332]: Sending back val 23867, saturated true
[1970-Jan-18 17:06:44.517389]: GetCachedToolUsageStats called
[1970-Jan-18 17:06:44.566709]: Toolhead Abort
[1970-Jan-18 17:06:44.568599]: aborting pru with shutdown=true
[1970-Jan-18 17:06:44.574312]: Last sync period had (0,0,9191595) buffer fulls due to suspend moves
[1970-Jan-18 17:06:44.576239]: Libstepper All Axis Abort
[1970-Jan-18 17:08:55.767890]: Toolhead 0 state error: 56
[1970-Jan-18 17:08:57.782775]: Toolhead 0 state error: 0
[1970-Jan-18 17:12:35.287009]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-18 17:12:35.288792]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 17:13:28.618305]: GetCachedToolUsageStats called
[1970-Jan-18 17:13:36.029513]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-18 17:13:36.031509]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 17:13:36.092394]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-18 17:14:11.770249]: TH0: 1 failures in last 1013 packets (0.0987167%)
[1970-Jan-18 17:14:11.772305]: Toolhead Abort
[1970-Jan-18 17:14:11.774107]: aborting pru with shutdown=false
[1970-Jan-18 17:14:11.776634]: Last sync period had (0,0,9197649) buffer fulls due to suspend moves
[1970-Jan-18 17:14:11.778376]: Libstepper All Axis Abort
[1970-Jan-18 17:14:11.940802]: GetCachedToolUsageStats called
[1970-Jan-18 17:14:12.629349]: Toolhead Abort
[1970-Jan-18 17:14:12.641766]: aborting pru with shutdown=true
[1970-Jan-18 17:14:12.644572]: Last sync period had (0,0,9197712) buffer fulls due to suspend moves
[1970-Jan-18 17:14:12.646323]: Libstepper All Axis Abort
[1970-Jan-18 17:14:12.765124]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-18 17:14:12.766870]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 17:14:14.364574]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-18 17:14:14.366341]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 17:14:22.089974]: GetCachedToolUsageStats called
[1970-Jan-18 17:14:23.342528]: Heater manager Set Target Temperature to 180, index 0
[1970-Jan-18 17:14:23.344325]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 17:14:24.543117]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false
[1970-Jan-18 17:14:24.545153]: Load Sense Limit Method: 1
[1970-Jan-18 17:14:24.550901]: Last sync period had (0,0,9197865) buffer fulls due to suspend moves
[1970-Jan-18 17:14:24.553371]: Libstepper All Axis Abort
[1970-Jan-18 17:14:25.515346]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 17:14:29.037070]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-18 17:14:29.039065]: Toolhead Abort
[1970-Jan-18 17:14:29.071247]: aborting pru with shutdown=true
[1970-Jan-18 17:14:29.080507]: Last sync period had (0,0,9198084) buffer fulls due to suspend moves
[1970-Jan-18 17:14:29.082476]: Libstepper All Axis Abort
[1970-Jan-18 17:14:29.259040]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-18 17:14:31.212303]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false
[1970-Jan-18 17:14:31.214488]: Load Sense Limit Method: 0
[1970-Jan-18 17:14:31.217100]: Last sync period had (0,0,9198201) buffer fulls due to suspend moves
[1970-Jan-18 17:14:31.218874]: Libstepper All Axis Abort
[1970-Jan-18 17:14:32.276786]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 17:14:37.258686]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 17:14:37.773097]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-18 17:14:37.775089]: Toolhead Abort
[1970-Jan-18 17:14:37.776819]: aborting pru with shutdown=true
[1970-Jan-18 17:14:37.792932]: CLEAR BUFFER FAIL! in libstepper::Abort()
[1970-Jan-18 17:14:37.797137]: Last sync period had (0,0,9198609) buffer fulls due to suspend moves
[1970-Jan-18 17:14:37.798964]: Libstepper All Axis Abort
[1970-Jan-18 17:14:37.835919]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-18 17:14:38.458378]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-18 17:15:27.074500]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 17:15:34.860675]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 17:15:40.736875]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false
[1970-Jan-18 17:15:44.050361]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 17:15:48.725826]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 17:15:53.575626]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 17:15:58.649516]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 17:15:59.425561]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-18 17:15:59.427555]: Toolhead Abort
[1970-Jan-18 17:15:59.429284]: aborting pru with shutdown=false
[1970-Jan-18 17:15:59.432694]: Last sync period had (0,0,9203952) buffer fulls due to suspend moves
[1970-Jan-18 17:15:59.434447]: Libstepper All Axis Abort
[1970-Jan-18 17:15:59.470388]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-18 17:15:59.652947]: HES logged: true
[1970-Jan-18 17:16:08.869299]: GAP: Query->Await
[1970-Jan-18 17:16:08.910806]: TH0: Retreived step position 11796751
[1970-Jan-18 17:16:08.927820]: wait for PRU status in get position
[1970-Jan-18 17:16:08.929487]: wait for PRU status in get position
[1970-Jan-18 17:16:08.931447]: GAP: Await->Done(Query)
[1970-Jan-18 17:16:08.977891]: Changing HES sample rate. Commanded: 30Hz; clamped to 30.7143Hz (215/7)
[1970-Jan-18 17:16:09.063853]: Syncing turned true
[1970-Jan-18 17:16:09.093325]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-18 17:16:09.095643]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-18 17:16:09.154522]: Toolhead 0  ADC Error: 1
[1970-Jan-18 17:16:09.241765]: Toolhead 0 commands idle
[1970-Jan-18 17:16:09.275386]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-18 17:16:09.277229]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-18 17:16:09.278886]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-18 17:16:09.285983]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-18 17:16:09.288147]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-18 17:16:09.289828]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-18 17:16:09.293046]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-18 17:16:09.294891]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-18 17:16:09.296542]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-18 17:16:09.298222]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-18 17:16:09.300294]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-18 17:16:12.121220]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-18 17:16:16.361759]: Buffer stall ongoing: 1806
[1970-Jan-18 17:16:16.394037]: Buffer stall ongoing: 8643
[1970-Jan-18 17:16:16.545199]: Buffer stall ongoing: 40506
[1970-Jan-18 17:16:16.583715]: Last sync period had (0,0,468) buffer fulls due to suspend moves
[1970-Jan-18 17:16:16.585538]: Syncing turned false
[1970-Jan-18 17:16:16.607509]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-18 17:16:16.609236]: Buffer stall ongoing: 49020
[1970-Jan-18 17:16:16.651647]: Toolhead 0  ADC Error: 0
[1970-Jan-18 17:16:17.025086]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 17:16:17.686045]: HES logged: true
[1970-Jan-18 17:16:17.930844]: GetCachedToolUsageStats called
[1970-Jan-18 17:16:20.990399]: GAP: Query->Await
[1970-Jan-18 17:16:21.025370]: TH0: Retreived step position 11600143
[1970-Jan-18 17:16:21.053601]: wait for PRU status in get position
[1970-Jan-18 17:16:21.055287]: wait for PRU status in get position
[1970-Jan-18 17:16:21.056984]: GAP: Await->Done(Query)
[1970-Jan-18 17:16:22.066964]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 17:16:27.463283]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 17:16:29.003873]: Changing HES sample rate. Commanded: 215Hz; clamped to 215Hz (215/1)
[1970-Jan-18 17:16:29.488106]: GetCachedToolUsageStats called
[1970-Jan-18 17:16:29.602741]: Expecting 98616.7 steps extruded this print from 908.491 mm of plastic
[1970-Jan-18 17:16:29.806909]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-18 17:16:29.808690]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 17:16:30.028859]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-18 17:17:30.974586]: Steps overrun! last 63387 and just got 275
[1970-Jan-18 17:17:30.976295]: calculated 2423
[1970-Jan-18 17:17:36.369883]: Expend Buffer: false
[1970-Jan-18 17:17:36.476775]: Syncing turned true
[1970-Jan-18 17:17:36.554785]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-18 17:17:36.556487]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-18 17:17:37.096007]: Toolhead 0  ADC Error: 1
[1970-Jan-18 17:17:37.313135]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-18 17:17:37.314982]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-18 17:17:37.316679]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-18 17:17:37.319436]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-18 17:17:37.321494]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-18 17:17:37.323186]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-18 17:17:37.324875]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-18 17:17:37.326548]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-18 17:17:37.328347]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-18 17:17:37.330223]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-18 17:17:37.331921]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-18 17:17:38.461172]: Expected packet id: 0x8b, Got packet id: 0x0, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x1,0x13,0x1,0x0,0xd7,0x0,0x0,0xac,

[1970-Jan-18 17:17:38.463071]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-18 17:17:38.583475]: Expected packet id: 0xa8, Got packet id: 0xa7, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x1,0x13,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4a,0x1,0x0,0x0,0x0,0x0,0x0,0x47,0x0,0xa7,0x61,0xaf,0xb4,0xba,

[1970-Jan-18 17:17:38.585392]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-18 17:18:31.053722]: Expected packet id: 0xb2, Got packet id: 0xb1, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd2,0x0,0xf,0x32,0x81,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x1,0x72,0x0,0xb1,0x86,0x96,0x82,0xeb,

[1970-Jan-18 17:18:31.057676]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-18 17:18:47.921503]: GetCachedToolUsageStats called
[1970-Jan-18 17:18:49.397992]: toolhead pausing
[1970-Jan-18 17:18:49.399748]: Toolhead 0 : Retry: Waited 1.5677s from state change
[1970-Jan-18 17:18:49.406455]: Last sync period had (0,810,8073) buffer fulls due to suspend moves
[1970-Jan-18 17:18:49.408397]: Syncing turned false
[1970-Jan-18 17:18:49.410489]: quack pause: true
[1970-Jan-18 17:18:49.590222]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-18 17:18:49.703755]: Last sync period had (0,810,8073) buffer fulls due to suspend moves
[1970-Jan-18 17:18:49.706141]: Libstepper All Axis Abort
[1970-Jan-18 17:18:49.708001]: Clear Toolhead Buffer
[1970-Jan-18 17:18:49.724697]: clear toolhead buffer acknowledged
[1970-Jan-18 17:18:49.772318]: toolhead unpausing
[1970-Jan-18 17:18:49.774040]: quack pause: false
[1970-Jan-18 17:18:49.847524]: Expend Buffer: true
[1970-Jan-18 17:18:49.877137]: Last sync period had (0,810,8088) buffer fulls due to suspend moves
[1970-Jan-18 17:18:49.878984]: Syncing turned false
[1970-Jan-18 17:18:49.936405]: Toolhead 0  ADC Error: 0
[1970-Jan-18 17:18:49.959114]: GAP: Query->Await
[1970-Jan-18 17:18:49.982707]: TH0: Retreived step position 13893903
[1970-Jan-18 17:18:50.002877]: wait for PRU status in get position
[1970-Jan-18 17:18:50.004582]: wait for PRU status in get position
[1970-Jan-18 17:18:50.006238]: GAP: Await->Done(Query)
[1970-Jan-18 17:18:50.114252]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-18 17:18:50.117147]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 17:18:51.436891]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 17:18:58.355407]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 17:19:01.535675]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-18 17:19:01.537477]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 17:19:01.649264]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-18 17:19:01.872467]: GetCachedToolUsageStats called
[1970-Jan-18 17:19:15.177521]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 17:19:19.978968]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 17:19:22.638261]: Last sync period had (0,810,9921) buffer fulls due to suspend moves
[1970-Jan-18 17:19:22.650343]: Syncing turned false
[1970-Jan-18 17:19:22.652188]: TH0: 45 failures in last 3415 packets (1.31772%)
[1970-Jan-18 17:19:22.654128]: Toolhead Abort
[1970-Jan-18 17:19:22.655992]: aborting pru with shutdown=true
[1970-Jan-18 17:19:22.662895]: Last sync period had (0,810,9921) buffer fulls due to suspend moves
[1970-Jan-18 17:19:22.664699]: Libstepper All Axis Abort
[1970-Jan-18 17:19:22.666790]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-18 17:19:22.668582]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 17:19:22.764045]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-18 17:19:22.765826]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 17:19:22.835667]: Commanding stats update: Retract count: 25748446
[1970-Jan-18 17:19:22.837412]: Toolhead 0 marked as possibly blocking!
[1970-Jan-18 17:19:23.462272]: Toolhead 0 done blocking!
[1970-Jan-18 17:19:23.620004]: GetToolUsageStats called in machine  state 0
[1970-Jan-18 17:19:23.622119]: Commanding tool usage stat retrieve
[1970-Jan-18 17:19:23.623814]: GetToolUsageState: Proceeds to 1
[1970-Jan-18 17:19:23.626563]: GetToolUsagState: Error from retrieve: 0x10a
[1970-Jan-18 17:19:23.662669]: Raw usage stats: retract 51496884ct, extrusion 1351463 steps, 4545 seconds, refurbed 0 times
[1970-Jan-18 17:19:23.749322]: GetToolUsageStats called in machine  state 1
[1970-Jan-18 17:19:23.761557]: VerifyToolUsageStatsRetrieved: Done
[1970-Jan-18 17:19:23.763297]: GetToolUsageState: Proceeds to 2
[1970-Jan-18 17:19:23.841125]: GetToolUsageStats called in machine  state 2
[1970-Jan-18 17:19:23.842891]: GetToolUsageState: Done, resets
[1970-Jan-18 17:24:00.742887]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-18 17:24:00.745297]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 17:24:01.940684]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-18 17:26:12.391841]: GetCachedToolUsageStats called
[1970-Jan-18 17:26:26.322924]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-18 17:26:30.403259]: Raw HES proceeding
[1970-Jan-18 17:26:30.418914]: Got raw val 24020, saturated: true
[1970-Jan-18 17:26:30.434523]: Returning HES
[1970-Jan-18 17:26:30.436215]: Sending back val 24020, saturated true
[1970-Jan-18 17:26:30.542036]: GetCachedToolUsageStats called
[1970-Jan-18 17:26:30.567268]: Toolhead Abort
[1970-Jan-18 17:26:30.575338]: aborting pru with shutdown=true
[1970-Jan-18 17:26:30.580858]: Last sync period had (0,810,21552) buffer fulls due to suspend moves
[1970-Jan-18 17:26:30.582776]: Libstepper All Axis Abort
[1970-Jan-18 17:26:33.920995]: Toolhead 0 state error: 80
[1970-Jan-18 17:26:45.997245]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-18 17:26:45.999148]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-18 17:43:14.618056]: GetCachedToolUsageStats called
[1970-Jan-19 05:37:23.203906]: GetCachedToolUsageStats called
[1970-Jan-21 17:40:03.287720]: Toolhead 0 state error: 0
[1970-Jan-21 17:40:06.077498]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-21 17:40:06.079413]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-21 17:40:07.296848]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-21 17:42:33.733433]: Toolhead 0 state error: 80
[1970-Jan-21 17:42:44.667568]: Toolhead 0 state error: 0
[1970-Jan-21 17:42:47.501739]: Toolhead 0 state error: 80
[1970-Jan-21 17:42:51.435348]: Toolhead 0 state error: 0
[1970-Jan-21 17:42:54.894750]: Toolhead 0 state error: 80
[1970-Jan-21 17:42:56.775715]: Toolhead 0 state error: 0
[1970-Jan-21 17:43:00.992227]: GetCachedToolUsageStats called
[1970-Jan-21 17:43:04.855889]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-21 17:43:10.152803]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-21 17:43:14.971126]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-21 17:43:20.683068]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-21 17:43:23.481089]: Raw HES proceeding
[1970-Jan-21 17:43:23.505996]: Got raw val 24039, saturated: true
[1970-Jan-21 17:43:23.558579]: Returning HES
[1970-Jan-21 17:43:23.572273]: Sending back val 24039, saturated true
[1970-Jan-21 17:43:23.685138]: GetCachedToolUsageStats called
[1970-Jan-21 17:43:23.740706]: Toolhead Abort
[1970-Jan-21 17:43:23.742605]: aborting pru with shutdown=true
[1970-Jan-21 17:43:23.745376]: Last sync period had (0,810,1568475) buffer fulls due to suspend moves
[1970-Jan-21 17:43:23.747174]: Libstepper All Axis Abort
[1970-Jan-21 17:43:32.568671]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-21 17:43:32.570637]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-21 17:43:39.979696]: GetCachedToolUsageStats called
[1970-Jan-21 17:43:41.111254]: Heater manager Set Target Temperature to 180, index 0
[1970-Jan-21 17:43:41.113064]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-21 17:43:42.251769]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false
[1970-Jan-21 17:43:42.253839]: Load Sense Limit Method: 1
[1970-Jan-21 17:43:42.259797]: Last sync period had (0,810,1568667) buffer fulls due to suspend moves
[1970-Jan-21 17:43:42.262066]: Libstepper All Axis Abort
[1970-Jan-21 17:43:42.996737]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-21 17:43:42.999157]: Toolhead Abort
[1970-Jan-21 17:43:43.001181]: aborting pru with shutdown=true
[1970-Jan-21 17:43:43.010930]: Last sync period had (0,810,1568691) buffer fulls due to suspend moves
[1970-Jan-21 17:43:43.012850]: Libstepper All Axis Abort
[1970-Jan-21 17:43:43.064827]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-21 17:43:45.013141]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false
[1970-Jan-21 17:43:45.016255]: Load Sense Limit Method: 0
[1970-Jan-21 17:43:45.023148]: Last sync period had (0,810,1568775) buffer fulls due to suspend moves
[1970-Jan-21 17:43:45.024965]: Libstepper All Axis Abort
[1970-Jan-21 17:43:45.802841]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-21 17:43:45.808853]: Toolhead Abort
[1970-Jan-21 17:43:45.811021]: aborting pru with shutdown=true
[1970-Jan-21 17:43:45.814103]: Last sync period had (0,810,1568805) buffer fulls due to suspend moves
[1970-Jan-21 17:43:45.816539]: Libstepper All Axis Abort
[1970-Jan-21 17:43:45.916274]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-21 17:43:46.602615]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-21 17:44:42.098120]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-21 17:44:47.471146]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-21 17:44:58.407774]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false
[1970-Jan-21 17:45:00.826966]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-21 17:45:06.786739]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-21 17:45:11.984491]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-21 17:45:17.061036]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-21 17:45:17.062908]: Toolhead Abort
[1970-Jan-21 17:45:17.064617]: aborting pru with shutdown=false
[1970-Jan-21 17:45:17.067500]: Last sync period had (0,810,1574298) buffer fulls due to suspend moves
[1970-Jan-21 17:45:17.069231]: Libstepper All Axis Abort
[1970-Jan-21 17:45:17.113946]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-21 17:45:17.269717]: HES logged: true
[1970-Jan-21 17:45:18.434825]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-21 17:45:26.538678]: GAP: Query->Await
[1970-Jan-21 17:45:26.559879]: TH0: Retreived step position 11337999
[1970-Jan-21 17:45:26.624931]: wait for PRU status in get position
[1970-Jan-21 17:45:26.626595]: wait for PRU status in get position
[1970-Jan-21 17:45:26.628338]: GAP: Await->Done(Query)
[1970-Jan-21 17:45:26.690695]: Changing HES sample rate. Commanded: 30Hz; clamped to 30.7143Hz (215/7)
[1970-Jan-21 17:45:26.790241]: Syncing turned true
[1970-Jan-21 17:45:26.813487]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-21 17:45:26.815222]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-21 17:45:26.873327]: Toolhead 0  ADC Error: 1
[1970-Jan-21 17:45:26.935257]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-21 17:45:26.936938]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-21 17:45:26.954834]: Toolhead 0 commands idle
[1970-Jan-21 17:45:26.993117]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-21 17:45:26.994957]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-21 17:45:26.996613]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-21 17:45:26.998693]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-21 17:45:27.000778]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-21 17:45:27.003350]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-21 17:45:27.005160]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-21 17:45:27.006837]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-21 17:45:27.008527]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-21 17:45:31.204323]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-21 17:45:34.112330]: Buffer stall ongoing: 9288
[1970-Jan-21 17:45:34.271074]: Buffer stall ongoing: 42828
[1970-Jan-21 17:45:34.288605]: Last sync period had (0,0,444) buffer fulls due to suspend moves
[1970-Jan-21 17:45:34.290750]: Syncing turned false
[1970-Jan-21 17:45:34.314924]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-21 17:45:34.321415]: Buffer stall ongoing: 46956
[1970-Jan-21 17:45:34.394003]: Toolhead 0  ADC Error: 0
[1970-Jan-21 17:45:35.454321]: HES logged: true
[1970-Jan-21 17:45:35.715952]: GetCachedToolUsageStats called
[1970-Jan-21 17:45:37.397416]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-21 17:45:38.812658]: GAP: Query->Await
[1970-Jan-21 17:45:38.847457]: TH0: Retreived step position 11731215
[1970-Jan-21 17:45:38.888412]: wait for PRU status in get position
[1970-Jan-21 17:45:38.890292]: wait for PRU status in get position
[1970-Jan-21 17:45:38.892143]: GAP: Await->Done(Query)
[1970-Jan-21 17:45:42.859839]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-21 17:45:46.847871]: Changing HES sample rate. Commanded: 215Hz; clamped to 215Hz (215/1)
[1970-Jan-21 17:45:47.424951]: GetCachedToolUsageStats called
[1970-Jan-21 17:45:47.578504]: Expecting 98616.7 steps extruded this print from 908.491 mm of plastic
[1970-Jan-21 17:45:48.065752]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-21 17:45:48.067526]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-21 17:45:48.408844]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-21 17:46:46.109372]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-21 17:46:48.735680]: Expend Buffer: false
[1970-Jan-21 17:46:48.837179]: Syncing turned true
[1970-Jan-21 17:46:48.933154]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-21 17:46:48.934988]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-21 17:46:49.279378]: Toolhead 0  ADC Error: 1
[1970-Jan-21 17:46:49.332602]: Expected packet id: 0xf, Got packet id: 0xe, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x7c,0x29,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4a,0x1,0x0,0x0,0x0,0x0,0x1,0x55,0x0,0xe,0x58,0xfb,0xb4,0x72,

[1970-Jan-21 17:46:49.334499]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-21 17:46:49.505237]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-21 17:46:49.506948]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-21 17:46:49.508628]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-21 17:46:49.510827]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-21 17:46:49.512509]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-21 17:46:49.514187]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-21 17:46:49.515857]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-21 17:46:49.517673]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-21 17:46:49.519624]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-21 17:46:49.522599]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-21 17:46:49.524473]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-21 17:46:49.844409]: Expected packet id: 0x53, Got packet id: 0x52, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x7c,0x29,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4a,0x1,0x0,0x0,0x0,0x0,0x0,0x21,0x0,0x52,0xd1,0x62,0xe,0x44,

[1970-Jan-21 17:46:49.846329]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-21 17:46:50.211416]: Expected packet id: 0x85, Got packet id: 0x84, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x7c,0x29,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4a,0x1,0x0,0x0,0x0,0x0,0x2,0x3e,0x0,0x84,0x3,0xa1,0x55,0x63,

[1970-Jan-21 17:46:50.213311]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-21 17:46:50.841141]: Expected packet id: 0xdf, Got packet id: 0xde, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x7c,0x29,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4a,0x1,0x0,0x0,0x0,0x0,0x0,0x76,0x0,0xde,0x5c,0x9f,0xf9,0x7a,

[1970-Jan-21 17:46:50.843043]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-21 17:47:28.809095]: GetCachedToolUsageStats called
[1970-Jan-21 17:47:30.287370]: toolhead pausing
[1970-Jan-21 17:47:30.289119]: Toolhead 0 : Retry: Waited 1.56767s from state change
[1970-Jan-21 17:47:30.297141]: Last sync period had (0,363,3426) buffer fulls due to suspend moves
[1970-Jan-21 17:47:30.298944]: Syncing turned false
[1970-Jan-21 17:47:30.300827]: quack pause: true
[1970-Jan-21 17:47:30.320599]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-21 17:47:30.348156]:  axis running: 0
[1970-Jan-21 17:47:30.432235]:  axis running: 0
[1970-Jan-21 17:47:30.462628]:  axis running: 0
[1970-Jan-21 17:47:30.495455]:  axis running: 0
[1970-Jan-21 17:47:30.568594]: Last sync period had (0,363,3426) buffer fulls due to suspend moves
[1970-Jan-21 17:47:30.571335]: Libstepper All Axis Abort
[1970-Jan-21 17:47:30.574296]: Clear Toolhead Buffer
[1970-Jan-21 17:47:30.591741]: clear toolhead buffer acknowledged
[1970-Jan-21 17:47:30.860356]: toolhead unpausing
[1970-Jan-21 17:47:30.862056]: quack pause: false
[1970-Jan-21 17:47:30.965253]: Expend Buffer: true
[1970-Jan-21 17:47:30.997529]: Last sync period had (0,363,3444) buffer fulls due to suspend moves
[1970-Jan-21 17:47:30.999373]: Syncing turned false
[1970-Jan-21 17:47:31.052225]: Toolhead 0  ADC Error: 0
[1970-Jan-21 17:47:31.075944]: GAP: Query->Await
[1970-Jan-21 17:47:31.097337]: TH0: Retreived step position 13828367
[1970-Jan-21 17:47:31.115695]: wait for PRU status in get position
[1970-Jan-21 17:47:31.117372]: wait for PRU status in get position
[1970-Jan-21 17:47:31.119017]: GAP: Await->Done(Query)
[1970-Jan-21 17:47:31.238444]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-21 17:47:31.240418]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-21 17:47:37.198187]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-21 17:47:42.408753]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-21 17:47:42.410749]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-21 17:47:42.505155]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-21 17:47:51.924944]: Last sync period had (0,363,4572) buffer fulls due to suspend moves
[1970-Jan-21 17:47:51.926744]: Syncing turned false
[1970-Jan-21 17:47:51.928571]: TH0: 36 failures in last 1969 packets (1.82834%)
[1970-Jan-21 17:47:51.931535]: Toolhead Abort
[1970-Jan-21 17:47:51.934361]: aborting pru with shutdown=true
[1970-Jan-21 17:47:51.936932]: Last sync period had (0,363,4572) buffer fulls due to suspend moves
[1970-Jan-21 17:47:51.938686]: Libstepper All Axis Abort
[1970-Jan-21 17:47:51.941734]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-21 17:47:51.943520]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-21 17:47:52.036419]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-21 17:47:52.038194]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-21 17:47:52.099638]: Commanding stats update: Retract count: 51496890
[1970-Jan-21 17:47:52.101778]: Toolhead 0 marked as possibly blocking!
[1970-Jan-21 17:47:52.685119]: Toolhead 0 done blocking!
[1970-Jan-21 17:47:52.822068]: GetToolUsageStats called in machine  state 0
[1970-Jan-21 17:47:52.823823]: Commanding tool usage stat retrieve
[1970-Jan-21 17:47:52.825634]: GetToolUsageState: Proceeds to 1
[1970-Jan-21 17:47:52.827278]: GetToolUsagState: Error from retrieve: 0x10a
[1970-Jan-21 17:47:52.853364]: Raw usage stats: retract 102993774ct, extrusion 1402538 steps, 4646 seconds, refurbed 0 times
[1970-Jan-21 17:47:52.872858]: GetToolUsageStats called in machine  state 1
[1970-Jan-21 17:47:52.874614]: VerifyToolUsageStatsRetrieved: Done
[1970-Jan-21 17:47:52.876403]: GetToolUsageState: Proceeds to 2
[1970-Jan-21 17:47:52.934162]: GetToolUsageStats called in machine  state 2
[1970-Jan-21 17:47:52.935914]: GetToolUsageState: Done, resets
[1970-Jan-22 17:23:42.327439]: GetCachedToolUsageStats called
[1970-Jan-22 17:26:22.090514]: GetCachedToolUsageStats called
[1970-Jan-22 17:26:30.885267]: GetCachedToolUsageStats called
[1970-Jan-22 17:26:32.553358]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-22 17:26:32.555338]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-22 17:26:32.613740]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-22 17:29:16.813081]: GetCachedToolUsageStats called
[1970-Jan-22 17:29:28.684930]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-22 17:29:34.083514]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-22 17:29:37.856840]: Last sync period had (0,363,517149) buffer fulls due to suspend moves
[1970-Jan-22 17:29:37.859069]: Syncing turned false
[1970-Jan-22 17:29:37.861103]: Toolhead Abort
[1970-Jan-22 17:29:37.862850]: aborting pru with shutdown=true
[1970-Jan-22 17:29:37.866312]: Last sync period had (0,363,517149) buffer fulls due to suspend moves
[1970-Jan-22 17:29:37.868105]: Libstepper All Axis Abort
[1970-Jan-22 17:29:37.869726]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-22 17:29:37.871647]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-22 17:29:38.000200]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-22 17:29:38.002108]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-22 17:29:38.077133]: Commanding stats update: Retract count: 102993774
[1970-Jan-22 17:29:38.083516]: Toolhead 0 marked as possibly blocking!
[1970-Jan-22 17:29:38.665478]: Toolhead 0 done blocking!
[1970-Jan-22 17:29:38.769145]: GetToolUsageStats called in machine  state 0
[1970-Jan-22 17:29:38.771756]: Commanding tool usage stat retrieve
[1970-Jan-22 17:29:38.773434]: GetToolUsageState: Proceeds to 1
[1970-Jan-22 17:29:38.775111]: GetToolUsagState: Error from retrieve: 0x10a
[1970-Jan-22 17:29:38.796964]: Raw usage stats: retract 205987548ct, extrusion 1402538 steps, 4646 seconds, refurbed 0 times
[1970-Jan-22 17:29:38.820498]: GetToolUsageStats called in machine  state 1
[1970-Jan-22 17:29:38.822521]: VerifyToolUsageStatsRetrieved: Done
[1970-Jan-22 17:29:38.824127]: GetToolUsageState: Proceeds to 2
[1970-Jan-22 17:29:38.864317]: GetToolUsageStats called in machine  state 2
[1970-Jan-22 17:29:38.866173]: GetToolUsageState: Done, resets
[1970-Jan-22 22:00:08.274261]: GetCachedToolUsageStats called
[1970-Jan-22 22:29:43.239280]: GetCachedToolUsageStats called
[1970-Jan-28 19:21:39.555042]: GetCachedToolUsageStats called
[1970-Jan-28 19:21:40.593342]: Heater manager Set Target Temperature to 180, index 0
[1970-Jan-28 19:21:40.595143]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-28 19:21:41.802496]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false
[1970-Jan-28 19:21:41.805607]: Load Sense Limit Method: 1
[1970-Jan-28 19:21:41.808946]: Last sync period had (0,363,3614997) buffer fulls due to suspend moves
[1970-Jan-28 19:21:41.811031]: Libstepper All Axis Abort
[1970-Jan-28 19:21:42.598169]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-28 19:21:42.600393]: Toolhead Abort
[1970-Jan-28 19:21:42.602167]: aborting pru with shutdown=true
[1970-Jan-28 19:21:42.605395]: Last sync period had (0,363,3615021) buffer fulls due to suspend moves
[1970-Jan-28 19:21:42.607201]: Libstepper All Axis Abort
[1970-Jan-28 19:21:42.687589]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-28 19:21:44.566675]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false
[1970-Jan-28 19:21:44.568713]: Load Sense Limit Method: 0
[1970-Jan-28 19:21:44.582291]: Last sync period had (0,363,3615120) buffer fulls due to suspend moves
[1970-Jan-28 19:21:44.584117]: Libstepper All Axis Abort
[1970-Jan-28 19:21:45.359367]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-28 19:21:45.371683]: Toolhead Abort
[1970-Jan-28 19:21:45.373460]: aborting pru with shutdown=true
[1970-Jan-28 19:21:45.376204]: Last sync period had (0,363,3615147) buffer fulls due to suspend moves
[1970-Jan-28 19:21:45.378181]: Libstepper All Axis Abort
[1970-Jan-28 19:21:45.477571]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-28 19:21:46.195288]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-28 19:21:48.802862]: Toolhead 0 state error: 80
[1970-Jan-28 19:21:49.130795]: GetCachedToolUsageStats called
[1970-Jan-28 19:21:51.186715]: libstepper: true toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-28 19:21:51.712506]: Last sync period had (0,363,3615399) buffer fulls due to suspend moves
[1970-Jan-28 19:21:51.714473]: Syncing turned false
[1970-Jan-28 19:21:51.716254]: Toolhead Abort
[1970-Jan-28 19:21:51.718009]: aborting pru with shutdown=true
[1970-Jan-28 19:21:51.721867]: Last sync period had (0,363,3615399) buffer fulls due to suspend moves
[1970-Jan-28 19:21:51.723691]: Libstepper All Axis Abort
[1970-Jan-28 19:21:51.725356]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-28 19:21:51.727100]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-28 19:21:52.078796]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-28 19:21:52.091658]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-28 19:21:52.182970]: Commanding stats update: Retract count: 205987548
[1970-Jan-28 19:21:52.184735]: Toolhead 0 marked as possibly blocking!
[1970-Jan-28 19:21:53.511472]: Toolhead 0 done blocking!
[1970-Jan-28 19:21:53.596472]: GetToolUsageStats called in machine  state 0
[1970-Jan-28 19:21:53.598254]: Commanding tool usage stat retrieve
[1970-Jan-28 19:21:53.609705]: GetToolUsageState: Proceeds to 1
[1970-Jan-28 19:21:53.611849]: GetToolUsagState: Error from retrieve: 0x10a
[1970-Jan-28 19:21:53.738294]: GetToolUsageStats called in machine  state 1
[1970-Jan-28 19:21:53.814875]: GetToolUsageStats called in machine  state 1
[1970-Jan-28 19:21:53.859069]: GetToolUsageStats called in machine  state 1
[1970-Jan-28 19:21:53.874039]: Raw usage stats: retract 411975096ct, extrusion 1402538 steps, 4646 seconds, refurbed 0 times
[1970-Jan-28 19:21:53.906094]: GetToolUsageStats called in machine  state 1
[1970-Jan-28 19:21:53.907920]: VerifyToolUsageStatsRetrieved: Done
[1970-Jan-28 19:21:53.922173]: GetToolUsageState: Proceeds to 2
[1970-Jan-28 19:21:53.957731]: GetToolUsageStats called in machine  state 2
[1970-Jan-28 19:21:53.959793]: GetToolUsageState: Done, resets
[1970-Jan-28 19:21:56.416262]: Toolhead 0 state error: 0
[1970-Jan-28 19:22:09.356840]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-28 19:22:09.358619]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-28 19:22:10.580358]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-28 19:24:29.342910]: Toolhead 0 state error: 80
[1970-Jan-28 19:24:30.773522]: Toolhead 0 state error: 0
[1970-Jan-28 19:24:48.872605]: GetCachedToolUsageStats called
[1970-Jan-28 19:24:54.610891]: Toolhead 0 state error: 80
[1970-Jan-28 19:24:56.806607]: GetCachedToolUsageStats called
[1970-Jan-28 19:24:56.833025]: Toolhead Abort
[1970-Jan-28 19:24:56.834772]: aborting pru with shutdown=true
[1970-Jan-28 19:24:56.837613]: Last sync period had (0,363,3625959) buffer fulls due to suspend moves
[1970-Jan-28 19:24:56.839384]: Libstepper All Axis Abort
[1970-Jan-28 19:24:57.058755]: GetCachedToolUsageStats called
[1970-Jan-28 19:24:58.288908]: Toolhead 0 state error: 0
[1970-Jan-28 19:25:04.281709]: Toolhead 0 state error: 80
[1970-Jan-28 19:25:06.756787]: Toolhead 0 state error: 0
[1970-Jan-28 19:25:08.791578]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-28 19:25:11.022030]: Toolhead 0 state error: 80
[1970-Jan-28 19:25:11.651433]: Toolhead 0 state error: 0
[1970-Jan-28 19:25:12.694133]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-28 19:25:14.413691]: Toolhead 0 state error: 80
[1970-Jan-28 19:25:18.131696]: Raw HES proceeding
[1970-Jan-28 19:25:18.159493]: HES not updated!
[1970-Jan-28 19:25:18.209757]: HES not updated!
[1970-Jan-28 19:25:18.226073]: Got raw val 24041, saturated: true
[1970-Jan-28 19:25:18.242081]: Returning HES
[1970-Jan-28 19:25:18.243769]: Sending back val 24041, saturated true
[1970-Jan-28 19:25:18.357143]: GetCachedToolUsageStats called
[1970-Jan-28 19:25:18.382248]: Toolhead Abort
[1970-Jan-28 19:25:18.384175]: aborting pru with shutdown=true
[1970-Jan-28 19:25:18.386762]: Last sync period had (0,363,3627303) buffer fulls due to suspend moves
[1970-Jan-28 19:25:18.389126]: Libstepper All Axis Abort
[1970-Jan-28 19:25:39.686107]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-28 19:25:39.687971]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-28 19:25:40.915038]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-28 19:25:41.189831]: GetCachedToolUsageStats called
[1970-Jan-28 19:25:42.464008]: Toolhead 0 state error: 0
[1970-Jan-28 19:25:43.189470]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-28 19:25:44.208485]: Toolhead 0 state error: 80
[1970-Jan-28 19:25:44.936761]: Toolhead 0 state error: 0
[1970-Jan-28 19:25:47.854743]: Toolhead 0 state error: 80
[1970-Jan-28 19:25:48.504745]: Toolhead 0 state error: 0
[1970-Jan-28 19:25:48.649842]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-28 19:25:49.222722]: Toolhead 0 state error: 80
[1970-Jan-28 19:25:50.555493]: Toolhead 0 state error: 0
[1970-Jan-28 19:25:51.724346]: Toolhead 0 state error: 80
[1970-Jan-28 19:25:52.408329]: Toolhead 0 state error: 0
[1970-Jan-28 19:25:54.800582]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-28 19:26:00.709417]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-28 19:26:06.077044]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-28 19:26:12.538375]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-28 19:26:17.641681]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-28 19:26:23.658763]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-28 19:26:28.775526]: Raw HES proceeding
[1970-Jan-28 19:26:28.800170]: Got raw val 23936, saturated: true
[1970-Jan-28 19:26:28.872484]: Returning HES
[1970-Jan-28 19:26:28.874184]: Sending back val 23936, saturated true
[1970-Jan-28 19:26:29.005821]: GetCachedToolUsageStats called
[1970-Jan-28 19:26:29.057843]: Toolhead Abort
[1970-Jan-28 19:26:29.060717]: aborting pru with shutdown=true
[1970-Jan-28 19:26:29.064154]: Last sync period had (0,363,3630048) buffer fulls due to suspend moves
[1970-Jan-28 19:26:29.065935]: Libstepper All Axis Abort
[1970-Jan-28 19:26:33.770907]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-28 19:26:33.773695]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-28 19:26:41.758166]: GetCachedToolUsageStats called
[1970-Jan-28 19:26:42.972927]: Heater manager Set Target Temperature to 180, index 0
[1970-Jan-28 19:26:42.974850]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-28 19:26:43.541738]: bronx lowest mem space: 0x346 bytes
[1970-Jan-28 19:26:44.215375]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false
[1970-Jan-28 19:26:44.218500]: Load Sense Limit Method: 1
[1970-Jan-28 19:26:44.241528]: Last sync period had (0,363,3630216) buffer fulls due to suspend moves
[1970-Jan-28 19:26:44.243528]: Libstepper All Axis Abort
[1970-Jan-28 19:26:44.997226]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-28 19:26:44.999214]: Toolhead Abort
[1970-Jan-28 19:26:45.001255]: aborting pru with shutdown=true
[1970-Jan-28 19:26:45.003895]: Last sync period had (0,363,3630240) buffer fulls due to suspend moves
[1970-Jan-28 19:26:45.005780]: Libstepper All Axis Abort
[1970-Jan-28 19:26:45.046263]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-28 19:26:46.968367]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false
[1970-Jan-28 19:26:46.971259]: Load Sense Limit Method: 0
[1970-Jan-28 19:26:46.973857]: Last sync period had (0,363,3630312) buffer fulls due to suspend moves
[1970-Jan-28 19:26:46.976061]: Libstepper All Axis Abort
[1970-Jan-28 19:26:47.804459]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-28 19:26:47.806310]: Toolhead Abort
[1970-Jan-28 19:26:47.808189]: aborting pru with shutdown=true
[1970-Jan-28 19:26:47.820452]: Last sync period had (0,363,3630345) buffer fulls due to suspend moves
[1970-Jan-28 19:26:47.822401]: Libstepper All Axis Abort
[1970-Jan-28 19:26:47.879782]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-28 19:26:48.517641]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-28 19:27:47.898014]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-28 19:27:53.814333]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-28 19:28:06.109752]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false
[1970-Jan-28 19:28:07.234149]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-28 19:28:13.418222]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-28 19:28:19.413349]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-28 19:28:24.778739]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-28 19:28:24.791205]: Toolhead Abort
[1970-Jan-28 19:28:24.794278]: aborting pru with shutdown=false
[1970-Jan-28 19:28:24.800797]: Last sync period had (0,363,3635673) buffer fulls due to suspend moves
[1970-Jan-28 19:28:24.802622]: Libstepper All Axis Abort
[1970-Jan-28 19:28:24.992780]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-28 19:28:25.186896]: HES logged: true
[1970-Jan-28 19:28:25.968229]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-28 19:28:34.545321]: GAP: Query->Await
[1970-Jan-28 19:28:34.563198]: TH0: Retreived step position 11403535
[1970-Jan-28 19:28:34.580529]: wait for PRU status in get position
[1970-Jan-28 19:28:34.582217]: wait for PRU status in get position
[1970-Jan-28 19:28:34.584469]: GAP: Await->Done(Query)
[1970-Jan-28 19:28:34.693567]: Changing HES sample rate. Commanded: 30Hz; clamped to 30.7143Hz (215/7)
[1970-Jan-28 19:28:34.792433]: Syncing turned true
[1970-Jan-28 19:28:34.814001]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-28 19:28:34.815884]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-28 19:28:34.848511]: Toolhead 0  ADC Error: 1
[1970-Jan-28 19:28:34.926785]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-28 19:28:34.928505]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-28 19:28:34.930412]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-28 19:28:34.932249]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-28 19:28:34.934233]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-28 19:28:34.936392]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-28 19:28:34.945578]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-28 19:28:34.947323]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-28 19:28:34.949656]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-28 19:28:34.951745]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-28 19:28:34.953436]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-28 19:28:34.973086]: Toolhead 0 commands idle
[1970-Jan-28 19:28:39.118392]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-28 19:28:42.102898]: Buffer stall ongoing: 10578
[1970-Jan-28 19:28:42.279418]: Buffer stall ongoing: 47859
[1970-Jan-28 19:28:42.334307]: Buffer stall ongoing: 59469
[1970-Jan-28 19:28:42.364936]: Last sync period had (0,0,423) buffer fulls due to suspend moves
[1970-Jan-28 19:28:42.366959]: Syncing turned false
[1970-Jan-28 19:28:42.413326]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-28 19:28:42.415123]: Buffer stall ongoing: 66435
[1970-Jan-28 19:28:42.477626]: Toolhead 0  ADC Error: 0
[1970-Jan-28 19:28:43.755295]: HES logged: true
[1970-Jan-28 19:28:44.041427]: GetCachedToolUsageStats called
[1970-Jan-28 19:28:46.432711]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-28 19:28:47.161461]: GAP: Query->Await
[1970-Jan-28 19:28:47.188543]: TH0: Retreived step position 11796751
[1970-Jan-28 19:28:47.208927]: wait for PRU status in get position
[1970-Jan-28 19:28:47.210821]: wait for PRU status in get position
[1970-Jan-28 19:28:47.212475]: GAP: Await->Done(Query)
[1970-Jan-28 19:28:52.182413]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-28 19:28:55.387324]: Changing HES sample rate. Commanded: 215Hz; clamped to 215Hz (215/1)
[1970-Jan-28 19:28:55.899657]: GetCachedToolUsageStats called
[1970-Jan-28 19:28:56.051863]: Expecting 98616.7 steps extruded this print from 908.491 mm of plastic
[1970-Jan-28 19:28:56.309219]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-28 19:28:56.311229]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-28 19:28:56.548489]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-28 19:29:50.308577]: Expend Buffer: false
[1970-Jan-28 19:29:50.410626]: Syncing turned true
[1970-Jan-28 19:29:50.494165]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-28 19:29:50.495878]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-28 19:29:50.891780]: Toolhead 0  ADC Error: 1
[1970-Jan-28 19:29:51.120879]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-28 19:29:51.122635]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-28 19:29:51.124335]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-28 19:29:51.126014]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-28 19:29:51.128134]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-28 19:29:51.129844]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-28 19:29:51.132701]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-28 19:29:51.134441]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-28 19:29:51.136134]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-28 19:29:51.137826]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-28 19:29:51.139649]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-28 19:29:52.700442]: Expected packet id: 0xac, Got packet id: 0xab, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x29,0x9f,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x0,0x0,0x0,0x0,0x8,0x6d,0x0,0xab,0x9,0xb4,0x66,0xc0,

[1970-Jan-28 19:29:52.702335]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-28 19:29:52.748592]: Expected packet id: 0xb8, Got packet id: 0xb7, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x29,0x9f,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x0,0x0,0x0,0x0,0x4,0xf9,0x0,0xb7,0xad,0x79,0x95,0x1b,

[1970-Jan-28 19:29:52.750696]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-28 19:29:52.870774]: Expected packet id: 0xd3, Got packet id: 0xd2, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x29,0xde,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x0,0x0,0x0,0x0,0x9,0x6c,0x0,0xd2,0x3,0xf9,0xce,0x7a,

[1970-Jan-28 19:29:52.872670]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-28 19:30:27.955373]: GetCachedToolUsageStats called
[1970-Jan-28 19:30:29.443855]: toolhead pausing
[1970-Jan-28 19:30:29.445722]: Toolhead 0 : Retry: Waited 1.60142s from state change
[1970-Jan-28 19:30:29.451052]: Last sync period had (0,369,3492) buffer fulls due to suspend moves
[1970-Jan-28 19:30:29.452847]: Syncing turned false
[1970-Jan-28 19:30:29.454527]: quack pause: true
[1970-Jan-28 19:30:29.591483]: Expected packet id: 0x3d, Got packet id: 0x3c, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0x50,0x70,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x0,0x2,0x0,0x3c,0x45,0xa0,0x75,0xcc,

[1970-Jan-28 19:30:29.593543]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-28 19:30:29.646765]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-28 19:30:29.712202]:  axis running: 0
[1970-Jan-28 19:30:29.758602]:  axis running: 0
[1970-Jan-28 19:30:29.836612]: Last sync period had (0,369,3492) buffer fulls due to suspend moves
[1970-Jan-28 19:30:29.839254]: Libstepper All Axis Abort
[1970-Jan-28 19:30:29.841482]: Clear Toolhead Buffer
[1970-Jan-28 19:30:29.857951]: clear toolhead buffer acknowledged
[1970-Jan-28 19:30:29.903879]: toolhead unpausing
[1970-Jan-28 19:30:29.905654]: quack pause: false
[1970-Jan-28 19:30:29.978161]: Expend Buffer: true
[1970-Jan-28 19:30:30.013963]: Last sync period had (0,369,3507) buffer fulls due to suspend moves
[1970-Jan-28 19:30:30.015814]: Syncing turned false
[1970-Jan-28 19:30:30.104936]: Toolhead 0  ADC Error: 0
[1970-Jan-28 19:30:30.125010]: GAP: Query->Await
[1970-Jan-28 19:30:30.141451]: TH0: Retreived step position 13959439
[1970-Jan-28 19:30:30.160753]: wait for PRU status in get position
[1970-Jan-28 19:30:30.162427]: wait for PRU status in get position
[1970-Jan-28 19:30:30.164110]: GAP: Await->Done(Query)
[1970-Jan-28 19:30:30.270732]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-28 19:30:30.272550]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-28 19:30:30.754108]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-28 19:30:36.579672]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-28 19:30:41.613081]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-28 19:30:41.614972]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-28 19:30:41.701239]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-28 19:31:13.377838]: GetCachedToolUsageStats called
[1970-Jan-28 19:31:26.449932]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-28 19:31:30.947995]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-28 19:31:34.288928]: Last sync period had (0,369,7116) buffer fulls due to suspend moves
[1970-Jan-28 19:31:34.291024]: Syncing turned false
[1970-Jan-28 19:31:34.293208]: TH0: 38 failures in last 1897 packets (2.00316%)
[1970-Jan-28 19:31:34.295114]: Toolhead Abort
[1970-Jan-28 19:31:34.296807]: aborting pru with shutdown=true
[1970-Jan-28 19:31:34.299415]: Last sync period had (0,369,7116) buffer fulls due to suspend moves
[1970-Jan-28 19:31:34.301459]: Libstepper All Axis Abort
[1970-Jan-28 19:31:34.304511]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-28 19:31:34.306622]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-28 19:31:34.393329]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-28 19:31:34.395236]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-28 19:31:34.454934]: Commanding stats update: Retract count: 411975102
[1970-Jan-28 19:31:34.456669]: Toolhead 0 marked as possibly blocking!
[1970-Jan-28 19:31:35.203275]: Toolhead 0 done blocking!
[1970-Jan-28 19:31:35.586441]: GetToolUsageStats called in machine  state 0
[1970-Jan-28 19:31:35.588849]: Commanding tool usage stat retrieve
[1970-Jan-28 19:31:35.607748]: GetToolUsageState: Proceeds to 1
[1970-Jan-28 19:31:35.609391]: GetToolUsagState: Error from retrieve: 0x10a
[1970-Jan-28 19:31:35.663248]: Raw usage stats: retract 823950198ct, extrusion 1474903 steps, 4778 seconds, refurbed 0 times
[1970-Jan-28 19:31:35.748936]: GetToolUsageStats called in machine  state 1
[1970-Jan-28 19:31:35.760960]: VerifyToolUsageStatsRetrieved: Done
[1970-Jan-28 19:31:35.762623]: GetToolUsageState: Proceeds to 2
[1970-Jan-28 19:31:35.845519]: GetToolUsageStats called in machine  state 2
[1970-Jan-28 19:31:35.847250]: GetToolUsageState: Done, resets
[1970-Feb-04 16:19:17.035699]: GetCachedToolUsageStats called
[1970-Feb-04 16:19:17.714536]: Heater manager Set Target Temperature to 180, index 0
[1970-Feb-04 16:19:17.716464]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-04 16:19:19.072798]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false
[1970-Feb-04 16:19:19.074778]: Load Sense Limit Method: 1
[1970-Feb-04 16:19:19.077382]: Last sync period had (0,369,3508158) buffer fulls due to suspend moves
[1970-Feb-04 16:19:19.079253]: Libstepper All Axis Abort
[1970-Feb-04 16:19:19.860535]: HOME: 1 homing: Limit Detected!: 
[1970-Feb-04 16:19:19.862360]: Toolhead Abort
[1970-Feb-04 16:19:19.864090]: aborting pru with shutdown=true
[1970-Feb-04 16:19:19.870303]: Last sync period had (0,369,3508188) buffer fulls due to suspend moves
[1970-Feb-04 16:19:19.873203]: Libstepper All Axis Abort
[1970-Feb-04 16:19:19.910260]: HOME: 1 homing: Limit Detected!: 
[1970-Feb-04 16:19:21.821329]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false
[1970-Feb-04 16:19:21.824004]: Load Sense Limit Method: 0
[1970-Feb-04 16:19:21.830845]: Last sync period had (0,369,3508287) buffer fulls due to suspend moves
[1970-Feb-04 16:19:21.832722]: Libstepper All Axis Abort
[1970-Feb-04 16:19:22.644642]: HOME: 0 homing: Limit Detected!: 
[1970-Feb-04 16:19:22.646482]: Toolhead Abort
[1970-Feb-04 16:19:22.648234]: aborting pru with shutdown=true
[1970-Feb-04 16:19:22.650884]: Last sync period had (0,369,3508320) buffer fulls due to suspend moves
[1970-Feb-04 16:19:22.652666]: Libstepper All Axis Abort
[1970-Feb-04 16:19:22.699955]: HOME: 0 homing: Limit Detected!: 
[1970-Feb-04 16:19:23.271251]: wait for heaters at target, wait bitmask 0x1
[1970-Feb-04 16:21:31.016073]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 16:21:36.817078]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 16:21:49.031091]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false
[1970-Feb-04 16:21:49.436858]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 16:21:54.498076]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 16:22:00.287466]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 16:22:05.766674]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 16:22:07.702289]: HOME: 2 homing: Limit Detected!: 
[1970-Feb-04 16:22:07.704135]: Toolhead Abort
[1970-Feb-04 16:22:07.706014]: aborting pru with shutdown=false
[1970-Feb-04 16:22:07.721939]: Last sync period had (0,369,3518172) buffer fulls due to suspend moves
[1970-Feb-04 16:22:07.723908]: Libstepper All Axis Abort
[1970-Feb-04 16:22:07.790997]: HOME: 2 homing: Limit Detected!: 
[1970-Feb-04 16:22:07.983687]: HES logged: true
[1970-Feb-04 16:22:17.182531]: GAP: Query->Await
[1970-Feb-04 16:22:17.210928]: TH0: Retreived step position 11796751
[1970-Feb-04 16:22:17.238514]: wait for PRU status in get position
[1970-Feb-04 16:22:17.250500]: wait for PRU status in get position
[1970-Feb-04 16:22:17.252231]: GAP: Await->Done(Query)
[1970-Feb-04 16:22:17.301247]: Changing HES sample rate. Commanded: 30Hz; clamped to 30.7143Hz (215/7)
[1970-Feb-04 16:22:17.392921]: Syncing turned true
[1970-Feb-04 16:22:17.434592]: PRU Event: PRU_SYNC_ON(12)
[1970-Feb-04 16:22:17.436313]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Feb-04 16:22:17.507634]: Toolhead 0  ADC Error: 1
[1970-Feb-04 16:22:17.574896]: Toolhead 0 commands idle
[1970-Feb-04 16:22:17.592852]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Feb-04 16:22:17.594723]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Feb-04 16:22:17.603290]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Feb-04 16:22:17.605128]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Feb-04 16:22:17.606884]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Feb-04 16:22:17.608582]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Feb-04 16:22:17.610679]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Feb-04 16:22:17.612589]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Feb-04 16:22:17.619307]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Feb-04 16:22:17.621322]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Feb-04 16:22:17.623033]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Feb-04 16:22:19.285765]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Feb-04 16:22:24.707140]: Buffer stall ongoing: 2709
[1970-Feb-04 16:22:24.885387]: Buffer stall ongoing: 40377
[1970-Feb-04 16:22:24.923553]: Last sync period had (0,0,441) buffer fulls due to suspend moves
[1970-Feb-04 16:22:24.926198]: Syncing turned false
[1970-Feb-04 16:22:24.945098]: PRU Event: PRU_SYNC_OFF(0)
[1970-Feb-04 16:22:24.946995]: Buffer stall ongoing: 48762
[1970-Feb-04 16:22:25.002491]: Toolhead 0  ADC Error: 0
[1970-Feb-04 16:22:25.035445]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Feb-04 16:22:26.074366]: HES logged: true
[1970-Feb-04 16:22:26.331628]: GetCachedToolUsageStats called
[1970-Feb-04 16:22:29.418282]: GAP: Query->Await
[1970-Feb-04 16:22:29.448615]: TH0: Retreived step position 11534607
[1970-Feb-04 16:22:29.518774]: wait for PRU status in get position
[1970-Feb-04 16:22:29.520638]: wait for PRU status in get position
[1970-Feb-04 16:22:29.522390]: GAP: Await->Done(Query)
[1970-Feb-04 16:22:31.289385]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 16:22:36.799355]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 16:22:37.699763]: Changing HES sample rate. Commanded: 215Hz; clamped to 215Hz (215/1)
[1970-Feb-04 16:22:38.144681]: GetCachedToolUsageStats called
[1970-Feb-04 16:22:38.271150]: Expecting 98616.7 steps extruded this print from 908.491 mm of plastic
[1970-Feb-04 16:22:38.531040]: Heater manager Set Target Temperature to 215, index 0
[1970-Feb-04 16:22:38.532973]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-04 16:22:38.791719]: wait for heaters at target, wait bitmask 0x1
[1970-Feb-04 16:23:49.515119]: Expend Buffer: false
[1970-Feb-04 16:23:49.624457]: Syncing turned true
[1970-Feb-04 16:23:49.715402]: PRU Event: PRU_SYNC_ON(12)
[1970-Feb-04 16:23:49.717146]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Feb-04 16:23:50.088539]: Toolhead 0  ADC Error: 1
[1970-Feb-04 16:23:50.308966]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Feb-04 16:23:50.310946]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Feb-04 16:23:50.312676]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Feb-04 16:23:50.314503]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Feb-04 16:23:50.316191]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Feb-04 16:23:50.317869]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Feb-04 16:23:50.319573]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Feb-04 16:23:50.321716]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Feb-04 16:23:50.323480]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Feb-04 16:23:50.325181]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Feb-04 16:23:50.327244]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Feb-04 16:23:51.476413]: Expected packet id: 0xd2, Got packet id: 0xd1, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x50,0x77,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x0,0x0,0x0,0x0,0x0,0xd9,0x0,0xd1,0x71,0xc5,0x69,0xe4,

[1970-Feb-04 16:23:51.478355]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-04 16:24:13.545676]: Toolhead 0 state error: 81
[1970-Feb-04 16:24:15.118478]: GetCachedToolUsageStats called
[1970-Feb-04 16:24:15.161625]: toolhead pausing
[1970-Feb-04 16:24:15.163374]: Toolhead 0 : Retry: Waited 1.61592s from state change
[1970-Feb-04 16:24:15.168028]: Last sync period had (0,249,2286) buffer fulls due to suspend moves
[1970-Feb-04 16:24:15.169817]: Syncing turned false
[1970-Feb-04 16:24:15.181266]: quack pause: true
[1970-Feb-04 16:24:15.223183]: PRU Event: PRU_SYNC_OFF(0)
[1970-Feb-04 16:24:15.243939]:  axis running: 0
[1970-Feb-04 16:24:15.445632]:  axis running: 0
[1970-Feb-04 16:24:15.501231]:  axis running: 0
[1970-Feb-04 16:24:15.522278]: Toolhead 0 state error: 0
[1970-Feb-04 16:24:15.601818]: Last sync period had (0,249,2286) buffer fulls due to suspend moves
[1970-Feb-04 16:24:15.604524]: Libstepper All Axis Abort
[1970-Feb-04 16:24:15.606263]: Clear Toolhead Buffer
[1970-Feb-04 16:24:15.622494]: clear toolhead buffer acknowledged
[1970-Feb-04 16:24:15.670721]: toolhead unpausing
[1970-Feb-04 16:24:15.672552]: quack pause: false
[1970-Feb-04 16:24:15.745124]: Expend Buffer: true
[1970-Feb-04 16:24:15.784417]: Last sync period had (0,249,2301) buffer fulls due to suspend moves
[1970-Feb-04 16:24:15.787339]: Syncing turned false
[1970-Feb-04 16:24:15.869664]: Toolhead 0  ADC Error: 0
[1970-Feb-04 16:24:15.891686]: GAP: Query->Await
[1970-Feb-04 16:24:15.907637]: TH0: Retreived step position 14418191
[1970-Feb-04 16:24:15.929221]: wait for PRU status in get position
[1970-Feb-04 16:24:15.931122]: wait for PRU status in get position
[1970-Feb-04 16:24:15.932764]: GAP: Await->Done(Query)
[1970-Feb-04 16:24:16.044629]: Suspend
[1970-Feb-04 16:24:16.047108]: Suspend index 45 found, A-pos 65.5741
[1970-Feb-04 16:24:18.915340]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Feb-04 16:24:21.661442]: GAP: Query->Await
[1970-Feb-04 16:24:21.696900]: TH0: Retreived step position 14287119
[1970-Feb-04 16:24:21.735371]: wait for PRU status in get position
[1970-Feb-04 16:24:21.737087]: wait for PRU status in get position
[1970-Feb-04 16:24:21.739383]: GAP: Await->Done(Query)
[1970-Feb-04 16:24:22.493281]: Heater manager Set Target Temperature to 215, index 0
[1970-Feb-04 16:24:22.495215]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-04 16:24:22.988047]: wait for heaters at target, wait bitmask 0x1
[1970-Feb-04 16:24:27.124357]: Expend Buffer: false
[1970-Feb-04 16:24:27.196505]: Syncing turned true
[1970-Feb-04 16:24:27.227093]: PRU Event: PRU_SYNC_ON(12)
[1970-Feb-04 16:24:27.228822]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Feb-04 16:24:27.614767]: Toolhead 0  ADC Error: 1
[1970-Feb-04 16:24:28.512908]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Feb-04 16:24:28.514645]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Feb-04 16:24:28.516573]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Feb-04 16:24:28.518415]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Feb-04 16:24:28.525052]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Feb-04 16:24:28.526814]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Feb-04 16:24:28.528625]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Feb-04 16:24:28.540623]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Feb-04 16:24:28.542368]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Feb-04 16:24:28.544177]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Feb-04 16:24:28.545852]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Feb-04 16:24:30.019521]: Expend Buffer: false
[1970-Feb-04 16:24:50.448502]: toolhead pausing
[1970-Feb-04 16:24:50.452953]: Last sync period had (0,210,1683) buffer fulls due to suspend moves
[1970-Feb-04 16:24:50.454711]: Syncing turned false
[1970-Feb-04 16:24:50.456498]: quack pause: true
[1970-Feb-04 16:24:50.508846]: PRU Event: PRU_SYNC_OFF(0)
[1970-Feb-04 16:24:50.532333]:  axis running: 0
[1970-Feb-04 16:24:50.584477]:  axis running: 0
[1970-Feb-04 16:24:50.623691]:  axis running: 0
[1970-Feb-04 16:24:50.664297]:  axis running: 0
[1970-Feb-04 16:24:50.714500]:  axis running: 0
[1970-Feb-04 16:24:50.772744]:  axis running: 0
[1970-Feb-04 16:24:50.841662]:  axis running: 0
[1970-Feb-04 16:24:50.995043]: Last sync period had (0,210,1683) buffer fulls due to suspend moves
[1970-Feb-04 16:24:50.997217]: Libstepper All Axis Abort
[1970-Feb-04 16:24:50.998930]: Clear Toolhead Buffer
[1970-Feb-04 16:24:51.014237]: clear toolhead buffer acknowledged
[1970-Feb-04 16:24:51.076473]: toolhead unpausing
[1970-Feb-04 16:24:51.078314]: quack pause: false
[1970-Feb-04 16:24:51.143877]: Expend Buffer: true
[1970-Feb-04 16:24:51.176098]: Last sync period had (0,210,1698) buffer fulls due to suspend moves
[1970-Feb-04 16:24:51.178327]: Syncing turned false
[1970-Feb-04 16:24:51.233886]: Toolhead 0  ADC Error: 0
[1970-Feb-04 16:24:51.256413]: GAP: Query->Await
[1970-Feb-04 16:24:51.274447]: TH0: Retreived step position 13631759
[1970-Feb-04 16:24:51.293906]: wait for PRU status in get position
[1970-Feb-04 16:24:51.295723]: wait for PRU status in get position
[1970-Feb-04 16:24:51.297362]: GAP: Await->Done(Query)
[1970-Feb-04 16:24:51.365119]: Suspend
[1970-Feb-04 16:24:51.367937]: Suspend index 96 found, A-pos 88.9904
[1970-Feb-04 16:24:52.668785]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Feb-04 16:24:56.980885]: GAP: Query->Await
[1970-Feb-04 16:24:56.995874]: TH0: Retreived step position 13566223
[1970-Feb-04 16:24:57.017269]: wait for PRU status in get position
[1970-Feb-04 16:24:57.018961]: wait for PRU status in get position
[1970-Feb-04 16:24:57.031541]: GAP: Await->Done(Query)
[1970-Feb-04 16:25:18.336669]: GetCachedToolUsageStats called
[1970-Feb-04 16:25:19.812769]: toolhead pausing
[1970-Feb-04 16:25:19.823123]: Last sync period had (0,210,2361) buffer fulls due to suspend moves
[1970-Feb-04 16:25:19.824877]: Syncing turned false
[1970-Feb-04 16:25:19.826511]: quack pause: true
[1970-Feb-04 16:25:19.986538]: Last sync period had (0,210,2370) buffer fulls due to suspend moves
[1970-Feb-04 16:25:19.988452]: Libstepper All Axis Abort
[1970-Feb-04 16:25:19.990343]: Clear Toolhead Buffer
[1970-Feb-04 16:25:20.008150]: clear toolhead buffer acknowledged
[1970-Feb-04 16:25:20.061163]: toolhead unpausing
[1970-Feb-04 16:25:20.062912]: quack pause: false
[1970-Feb-04 16:25:20.142386]: Expend Buffer: true
[1970-Feb-04 16:25:20.178002]: Last sync period had (0,210,2385) buffer fulls due to suspend moves
[1970-Feb-04 16:25:20.179878]: Syncing turned false
[1970-Feb-04 16:25:20.332014]: GAP: Query->Await
[1970-Feb-04 16:25:20.362892]: TH0: Retreived step position 14352655
[1970-Feb-04 16:25:20.401807]: wait for PRU status in get position
[1970-Feb-04 16:25:20.403906]: GAP: Await->Done(Query)
[1970-Feb-04 16:25:20.569287]: Heater manager Set Target Temperature to 0, index 0
[1970-Feb-04 16:25:20.571406]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-04 16:25:20.723282]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Feb-04 16:25:24.957260]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 16:25:27.034748]: Heater manager Set Target Temperature to 215, index 0
[1970-Feb-04 16:25:27.037472]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-04 16:25:27.105113]: wait for heaters at target, wait bitmask 0x1
[1970-Feb-04 16:25:27.274268]: GetCachedToolUsageStats called
[1970-Feb-04 16:25:40.938808]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 16:25:45.324800]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 16:25:48.059724]: Last sync period had (0,210,4155) buffer fulls due to suspend moves
[1970-Feb-04 16:25:48.061947]: Syncing turned false
[1970-Feb-04 16:25:48.063752]: TH0: 44 failures in last 2243 packets (1.96166%)
[1970-Feb-04 16:25:48.066014]: Toolhead Abort
[1970-Feb-04 16:25:48.067735]: aborting pru with shutdown=true
[1970-Feb-04 16:25:48.071558]: Last sync period had (0,210,4155) buffer fulls due to suspend moves
[1970-Feb-04 16:25:48.073336]: Libstepper All Axis Abort
[1970-Feb-04 16:25:48.074977]: Heater manager Set Target Temperature to 0, index 0
[1970-Feb-04 16:25:48.076904]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-04 16:25:48.166367]: Heater manager Set Target Temperature to 0, index 0
[1970-Feb-04 16:25:48.168296]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-04 16:25:48.225633]: Commanding stats update: Retract count: 823950206
[1970-Feb-04 16:25:48.227369]: Toolhead 0 marked as possibly blocking!
[1970-Feb-04 16:25:49.093025]: Toolhead 0 done blocking!
[1970-Feb-04 16:25:49.205731]: GetToolUsageStats called in machine  state 0
[1970-Feb-04 16:25:49.208073]: Commanding tool usage stat retrieve
[1970-Feb-04 16:25:49.209817]: GetToolUsageState: Proceeds to 1
[1970-Feb-04 16:25:49.211719]: GetToolUsagState: Error from retrieve: 0x10a
[1970-Feb-04 16:25:49.226460]: Raw usage stats: retract 1647900404ct, extrusion 1495470 steps, 4827 seconds, refurbed 0 times
[1970-Feb-04 16:25:49.301869]: GetToolUsageStats called in machine  state 1
[1970-Feb-04 16:25:49.304352]: VerifyToolUsageStatsRetrieved: Done
[1970-Feb-04 16:25:49.305990]: GetToolUsageState: Proceeds to 2
[1970-Feb-04 16:25:49.374831]: GetToolUsageStats called in machine  state 2
[1970-Feb-04 16:25:49.376569]: GetToolUsageState: Done, resets
[1970-Feb-04 16:25:52.410738]: GetCachedToolUsageStats called
[1970-Feb-04 16:25:52.889753]: Heater manager Set Target Temperature to 180, index 0
[1970-Feb-04 16:25:52.895798]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-04 16:25:54.102497]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false
[1970-Feb-04 16:25:54.105504]: Load Sense Limit Method: 1
[1970-Feb-04 16:25:54.108071]: Last sync period had (0,210,4296) buffer fulls due to suspend moves
[1970-Feb-04 16:25:54.109982]: Libstepper All Axis Abort
[1970-Feb-04 16:25:54.862629]: HOME: 1 homing: Limit Detected!: 
[1970-Feb-04 16:25:54.864497]: Toolhead Abort
[1970-Feb-04 16:25:54.866271]: aborting pru with shutdown=true
[1970-Feb-04 16:25:54.880836]: Last sync period had (0,210,4326) buffer fulls due to suspend moves
[1970-Feb-04 16:25:54.882653]: Libstepper All Axis Abort
[1970-Feb-04 16:25:54.981293]: HOME: 1 homing: Limit Detected!: 
[1970-Feb-04 16:25:56.942400]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false
[1970-Feb-04 16:25:56.944453]: Load Sense Limit Method: 0
[1970-Feb-04 16:25:56.947475]: CLEAR BUFFER FAIL! in libstepper::Abort()
[1970-Feb-04 16:25:56.950219]: Last sync period had (0,210,4446) buffer fulls due to suspend moves
[1970-Feb-04 16:25:56.953123]: Libstepper All Axis Abort
[1970-Feb-04 16:25:57.732509]: HOME: 0 homing: Limit Detected!: 
[1970-Feb-04 16:25:57.734522]: Toolhead Abort
[1970-Feb-04 16:25:57.736304]: aborting pru with shutdown=true
[1970-Feb-04 16:25:57.738872]: Last sync period had (0,210,4485) buffer fulls due to suspend moves
[1970-Feb-04 16:25:57.741005]: Libstepper All Axis Abort
[1970-Feb-04 16:25:57.822245]: HOME: 0 homing: Limit Detected!: 
[1970-Feb-04 16:25:58.364909]: wait for heaters at target, wait bitmask 0x1
[1970-Feb-04 16:26:28.043552]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 16:26:33.513107]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 16:26:45.455125]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false
[1970-Feb-04 16:26:46.886621]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 16:26:52.275334]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 16:26:57.882491]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 16:27:03.076713]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 16:27:04.079436]: HOME: 2 homing: Limit Detected!: 
[1970-Feb-04 16:27:04.091661]: Toolhead Abort
[1970-Feb-04 16:27:04.093553]: aborting pru with shutdown=false
[1970-Feb-04 16:27:04.100830]: Last sync period had (0,210,8544) buffer fulls due to suspend moves
[1970-Feb-04 16:27:04.102653]: Libstepper All Axis Abort
[1970-Feb-04 16:27:04.141836]: HOME: 2 homing: Limit Detected!: 
[1970-Feb-04 16:27:04.301070]: HES logged: true
[1970-Feb-04 16:27:13.521307]: GAP: Query->Await
[1970-Feb-04 16:27:13.549320]: TH0: Retreived step position 11337999
[1970-Feb-04 16:27:13.570486]: wait for PRU status in get position
[1970-Feb-04 16:27:13.572185]: wait for PRU status in get position
[1970-Feb-04 16:27:13.574027]: GAP: Await->Done(Query)
[1970-Feb-04 16:27:13.617532]: Changing HES sample rate. Commanded: 30Hz; clamped to 30.7143Hz (215/7)
[1970-Feb-04 16:27:13.766145]: Syncing turned true
[1970-Feb-04 16:27:13.790782]: PRU Event: PRU_SYNC_ON(12)
[1970-Feb-04 16:27:13.792517]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Feb-04 16:27:13.836949]: Toolhead 0  ADC Error: 1
[1970-Feb-04 16:27:13.907679]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Feb-04 16:27:13.909413]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Feb-04 16:27:13.911966]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Feb-04 16:27:13.918143]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Feb-04 16:27:13.919878]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Feb-04 16:27:13.921817]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Feb-04 16:27:13.923528]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Feb-04 16:27:13.925370]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Feb-04 16:27:13.927068]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Feb-04 16:27:13.928763]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Feb-04 16:27:13.930657]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Feb-04 16:27:13.956389]: Toolhead 0 commands idle
[1970-Feb-04 16:27:16.297671]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Feb-04 16:27:21.039732]: Buffer stall ongoing: 387
[1970-Feb-04 16:27:21.104321]: Buffer stall ongoing: 13932
[1970-Feb-04 16:27:21.263609]: Buffer stall ongoing: 47601
[1970-Feb-04 16:27:21.283549]: Last sync period had (0,0,420) buffer fulls due to suspend moves
[1970-Feb-04 16:27:21.285501]: Syncing turned false
[1970-Feb-04 16:27:21.303971]: PRU Event: PRU_SYNC_OFF(0)
[1970-Feb-04 16:27:21.305713]: Buffer stall ongoing: 52245
[1970-Feb-04 16:27:21.372741]: Toolhead 0  ADC Error: 0
[1970-Feb-04 16:27:22.381561]: HES logged: true
[1970-Feb-04 16:27:22.661901]: GetCachedToolUsageStats called
[1970-Feb-04 16:27:22.944855]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 16:27:25.821120]: GAP: Query->Await
[1970-Feb-04 16:27:25.843701]: TH0: Retreived step position 11731215
[1970-Feb-04 16:27:25.861953]: wait for PRU status in get position
[1970-Feb-04 16:27:25.863618]: wait for PRU status in get position
[1970-Feb-04 16:27:25.865219]: GAP: Await->Done(Query)
[1970-Feb-04 16:27:28.048758]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 16:27:33.710974]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 16:27:33.838839]: Changing HES sample rate. Commanded: 215Hz; clamped to 215Hz (215/1)
[1970-Feb-04 16:27:34.468536]: GetCachedToolUsageStats called
[1970-Feb-04 16:27:34.597064]: Expecting 98616.7 steps extruded this print from 908.491 mm of plastic
[1970-Feb-04 16:27:34.839810]: Heater manager Set Target Temperature to 215, index 0
[1970-Feb-04 16:27:34.841805]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-04 16:27:35.056576]: wait for heaters at target, wait bitmask 0x1
[1970-Feb-04 16:28:29.503295]: Expend Buffer: false
[1970-Feb-04 16:28:29.597158]: Syncing turned true
[1970-Feb-04 16:28:29.686489]: PRU Event: PRU_SYNC_ON(12)
[1970-Feb-04 16:28:29.688212]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Feb-04 16:28:30.052350]: Toolhead 0  ADC Error: 1
[1970-Feb-04 16:28:30.264211]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Feb-04 16:28:30.265934]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Feb-04 16:28:30.267627]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Feb-04 16:28:30.269459]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Feb-04 16:28:30.276438]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Feb-04 16:28:30.278203]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Feb-04 16:28:30.280559]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Feb-04 16:28:30.282284]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Feb-04 16:28:30.288146]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Feb-04 16:28:30.289853]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Feb-04 16:28:30.291788]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Feb-04 16:28:30.740728]: Expected packet id: 0xa9, Got packet id: 0xa8, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x59,0x26,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x0,0x0,0x0,0x0,0x0,0x8f,0x0,0xa8,0xda,0x4a,0xa2,0x24,

[1970-Feb-04 16:28:30.742764]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-04 16:28:32.148268]: Expected packet id: 0x2b, Got packet id: 0x2a, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x59,0x26,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x0,0x0,0x0,0x0,0x1,0x64,0x0,0x2a,0x5f,0x84,0xf2,0xd8,

[1970-Feb-04 16:28:32.150568]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-04 16:28:32.272394]: Expected packet id: 0x43, Got packet id: 0x42, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x59,0x26,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x0,0x0,0x0,0x0,0x7,0xae,0x0,0x42,0xa5,0xbe,0x57,0xf8,

[1970-Feb-04 16:28:32.274397]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-04 16:28:34.874484]: Toolhead 0 state error: 81
[1970-Feb-04 16:28:36.471668]: GetCachedToolUsageStats called
[1970-Feb-04 16:28:36.524116]: toolhead pausing
[1970-Feb-04 16:28:36.525895]: Toolhead 0 : Retry: Waited 1.63852s from state change
[1970-Feb-04 16:28:36.531203]: Last sync period had (0,276,2538) buffer fulls due to suspend moves
[1970-Feb-04 16:28:36.533000]: Syncing turned false
[1970-Feb-04 16:28:36.534824]: quack pause: true
[1970-Feb-04 16:28:36.567836]: PRU Event: PRU_SYNC_OFF(0)
[1970-Feb-04 16:28:36.589097]:  axis running: 0
[1970-Feb-04 16:28:36.690175]:  axis running: 0
[1970-Feb-04 16:28:36.772369]:  axis running: 0
[1970-Feb-04 16:28:36.840987]:  axis running: 0
[1970-Feb-04 16:28:36.913986]:  axis running: 0
[1970-Feb-04 16:28:36.991375]:  axis running: 0
[1970-Feb-04 16:28:37.049041]:  axis running: 0
[1970-Feb-04 16:28:37.089142]:  axis running: 0
[1970-Feb-04 16:28:37.171519]:  axis running: 0
[1970-Feb-04 16:28:37.257191]:  axis running: 0
[1970-Feb-04 16:28:37.349383]: Toolhead 0 state error: 0
[1970-Feb-04 16:28:37.429369]: Last sync period had (0,276,2538) buffer fulls due to suspend moves
[1970-Feb-04 16:28:37.432798]: Libstepper All Axis Abort
[1970-Feb-04 16:28:37.434543]: Clear Toolhead Buffer
[1970-Feb-04 16:28:37.456902]: clear toolhead buffer acknowledged
[1970-Feb-04 16:28:37.534710]: toolhead unpausing
[1970-Feb-04 16:28:37.536426]: quack pause: false
[1970-Feb-04 16:28:37.642380]: Expend Buffer: true
[1970-Feb-04 16:28:37.701043]: Last sync period had (0,276,2553) buffer fulls due to suspend moves
[1970-Feb-04 16:28:37.702892]: Syncing turned false
[1970-Feb-04 16:28:37.770624]: Toolhead 0  ADC Error: 0
[1970-Feb-04 16:28:37.853874]: GAP: Query->Await
[1970-Feb-04 16:28:37.882393]: TH0: Retreived step position 14156047
[1970-Feb-04 16:28:37.922935]: wait for PRU status in get position
[1970-Feb-04 16:28:37.924776]: wait for PRU status in get position
[1970-Feb-04 16:28:37.926439]: GAP: Await->Done(Query)
[1970-Feb-04 16:28:38.018985]: Suspend
[1970-Feb-04 16:28:38.030592]: Suspend index 9 found, A-pos 14.7148
[1970-Feb-04 16:28:40.891936]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Feb-04 16:28:43.710374]: GAP: Query->Await
[1970-Feb-04 16:28:43.752785]: TH0: Retreived step position 14352655
[1970-Feb-04 16:28:43.851650]: wait for PRU status in get position
[1970-Feb-04 16:28:43.853353]: wait for PRU status in get position
[1970-Feb-04 16:28:43.856114]: GAP: Await->Done(Query)
[1970-Feb-04 16:28:44.618979]: Heater manager Set Target Temperature to 215, index 0
[1970-Feb-04 16:28:44.631120]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-04 16:28:45.134005]: wait for heaters at target, wait bitmask 0x1
[1970-Feb-04 16:28:49.043203]: Expend Buffer: false
[1970-Feb-04 16:28:49.107218]: Syncing turned true
[1970-Feb-04 16:28:49.142861]: PRU Event: PRU_SYNC_ON(12)
[1970-Feb-04 16:28:49.144605]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Feb-04 16:28:49.616054]: Toolhead 0  ADC Error: 1
[1970-Feb-04 16:28:50.479489]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Feb-04 16:28:50.486240]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Feb-04 16:28:50.488025]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Feb-04 16:28:50.489766]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Feb-04 16:28:50.491722]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Feb-04 16:28:50.497649]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Feb-04 16:28:50.499402]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Feb-04 16:28:50.501682]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Feb-04 16:28:50.503421]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Feb-04 16:28:50.505149]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Feb-04 16:28:50.507015]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Feb-04 16:28:52.487272]: Expend Buffer: false
[1970-Feb-04 16:29:19.324580]: Toolhead 0 state error: 81
[1970-Feb-04 16:29:20.901689]: GetCachedToolUsageStats called
[1970-Feb-04 16:29:20.953631]: toolhead pausing
[1970-Feb-04 16:29:20.955379]: Toolhead 0 : Retry: Waited 1.62899s from state change
[1970-Feb-04 16:29:20.960661]: Last sync period had (0,297,2025) buffer fulls due to suspend moves
[1970-Feb-04 16:29:20.962443]: Syncing turned false
[1970-Feb-04 16:29:20.964171]: quack pause: true
[1970-Feb-04 16:29:21.001748]: PRU Event: PRU_SYNC_OFF(0)
[1970-Feb-04 16:29:21.061745]:  axis running: 0
[1970-Feb-04 16:29:21.610668]: Toolhead 0 state error: 0
[1970-Feb-04 16:29:21.718311]: Last sync period had (0,297,2025) buffer fulls due to suspend moves
[1970-Feb-04 16:29:21.721627]: Libstepper All Axis Abort
[1970-Feb-04 16:29:21.723380]: Clear Toolhead Buffer
[1970-Feb-04 16:29:21.749595]: clear toolhead buffer acknowledged
[1970-Feb-04 16:29:21.804679]: toolhead unpausing
[1970-Feb-04 16:29:21.806373]: quack pause: false
[1970-Feb-04 16:29:21.950391]: Expend Buffer: true
[1970-Feb-04 16:29:22.011011]: Last sync period had (0,297,2040) buffer fulls due to suspend moves
[1970-Feb-04 16:29:22.012868]: Syncing turned false
[1970-Feb-04 16:29:22.104824]: Toolhead 0  ADC Error: 0
[1970-Feb-04 16:29:22.151353]: GAP: Query->Await
[1970-Feb-04 16:29:22.172052]: TH0: Retreived step position 13762831
[1970-Feb-04 16:29:22.196243]: wait for PRU status in get position
[1970-Feb-04 16:29:22.197931]: wait for PRU status in get position
[1970-Feb-04 16:29:22.199577]: GAP: Await->Done(Query)
[1970-Feb-04 16:29:22.371112]: Suspend
[1970-Feb-04 16:29:22.373575]: Suspend index 46 found, A-pos 69.2437
[1970-Feb-04 16:29:24.002872]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Feb-04 16:29:27.952976]: GAP: Query->Await
[1970-Feb-04 16:29:27.971937]: TH0: Retreived step position 13762831
[1970-Feb-04 16:29:28.064338]: wait for PRU status in get position
[1970-Feb-04 16:29:28.066003]: wait for PRU status in get position
[1970-Feb-04 16:29:28.067697]: GAP: Await->Done(Query)
[1970-Feb-04 16:29:28.878399]: Heater manager Set Target Temperature to 215, index 0
[1970-Feb-04 16:29:28.936470]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-04 16:29:29.349076]: wait for heaters at target, wait bitmask 0x1
[1970-Feb-04 16:29:34.606459]: GetCachedToolUsageStats called
[1970-Feb-04 16:29:36.078654]: toolhead pausing
[1970-Feb-04 16:29:36.083762]: Last sync period had (0,297,2454) buffer fulls due to suspend moves
[1970-Feb-04 16:29:36.085686]: Syncing turned false
[1970-Feb-04 16:29:36.087354]: quack pause: true
[1970-Feb-04 16:29:36.280487]: Last sync period had (0,297,2463) buffer fulls due to suspend moves
[1970-Feb-04 16:29:36.282276]: Libstepper All Axis Abort
[1970-Feb-04 16:29:36.283983]: Clear Toolhead Buffer
[1970-Feb-04 16:29:36.305117]: clear toolhead buffer acknowledged
[1970-Feb-04 16:29:36.365899]: toolhead unpausing
[1970-Feb-04 16:29:36.368554]: quack pause: false
[1970-Feb-04 16:29:36.454662]: Expend Buffer: true
[1970-Feb-04 16:29:36.501811]: Last sync period had (0,297,2478) buffer fulls due to suspend moves
[1970-Feb-04 16:29:36.503634]: Syncing turned false
[1970-Feb-04 16:29:36.605565]: GAP: Query->Await
[1970-Feb-04 16:29:36.628688]: TH0: Retreived step position 13959439
[1970-Feb-04 16:29:36.661029]: wait for PRU status in get position
[1970-Feb-04 16:29:36.662850]: wait for PRU status in get position
[1970-Feb-04 16:29:36.664478]: GAP: Await->Done(Query)
[1970-Feb-04 16:29:36.849059]: Heater manager Set Target Temperature to 0, index 0
[1970-Feb-04 16:29:36.851094]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-04 16:29:39.084903]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 16:29:43.339442]: Heater manager Set Target Temperature to 215, index 0
[1970-Feb-04 16:29:43.351624]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-04 16:29:43.431007]: wait for heaters at target, wait bitmask 0x1
[1970-Feb-04 16:29:43.649480]: GetCachedToolUsageStats called
[1970-Feb-04 16:29:56.090782]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 16:30:00.438178]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 16:30:04.615239]: Last sync period had (0,297,4140) buffer fulls due to suspend moves
[1970-Feb-04 16:30:04.617048]: Syncing turned false
[1970-Feb-04 16:30:04.618827]: TH0: 67 failures in last 1844 packets (3.63341%)
[1970-Feb-04 16:30:04.621141]: Toolhead Abort
[1970-Feb-04 16:30:04.623708]: aborting pru with shutdown=true
[1970-Feb-04 16:30:04.626530]: Last sync period had (0,297,4140) buffer fulls due to suspend moves
[1970-Feb-04 16:30:04.628284]: Libstepper All Axis Abort
[1970-Feb-04 16:30:04.629926]: Heater manager Set Target Temperature to 0, index 0
[1970-Feb-04 16:30:04.631856]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-04 16:30:04.723716]: Heater manager Set Target Temperature to 0, index 0
[1970-Feb-04 16:30:04.725484]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-04 16:30:04.786637]: Commanding stats update: Retract count: 1647900413
[1970-Feb-04 16:30:04.788376]: Toolhead 0 marked as possibly blocking!
[1970-Feb-04 16:30:05.503230]: Toolhead 0 done blocking!
[1970-Feb-04 16:30:05.668036]: GetToolUsageStats called in machine  state 0
[1970-Feb-04 16:30:05.669906]: Commanding tool usage stat retrieve
[1970-Feb-04 16:30:05.671796]: GetToolUsageState: Proceeds to 1
[1970-Feb-04 16:30:05.673454]: GetToolUsagState: Error from retrieve: 0x10a
[1970-Feb-04 16:30:05.689221]: Raw usage stats: retract 3295800817ct, extrusion 1513940 steps, 4868 seconds, refurbed 0 times
[1970-Feb-04 16:30:05.724782]: GetToolUsageStats called in machine  state 1
[1970-Feb-04 16:30:05.727138]: VerifyToolUsageStatsRetrieved: Done
[1970-Feb-04 16:30:05.728775]: GetToolUsageState: Proceeds to 2
[1970-Feb-04 16:30:05.786125]: GetToolUsageStats called in machine  state 2
[1970-Feb-04 16:30:05.787867]: GetToolUsageState: Done, resets
[1970-Feb-04 18:44:35.149366]: Heater manager Set Target Temperature to 215, index 0
[1970-Feb-04 18:44:35.151425]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-04 18:44:36.339208]: wait for heaters at target, wait bitmask 0x1
[1970-Feb-04 18:47:28.684722]: GetCachedToolUsageStats called
[1970-Feb-04 18:47:33.014339]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Feb-04 18:47:37.849221]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Feb-04 18:47:43.906947]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Feb-04 18:47:48.834175]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 18:47:52.636728]: Raw HES proceeding
[1970-Feb-04 18:47:52.663826]: Got raw val 24030, saturated: true
[1970-Feb-04 18:47:52.736821]: Returning HES
[1970-Feb-04 18:47:52.738509]: Sending back val 24030, saturated true
[1970-Feb-04 18:47:52.865313]: GetCachedToolUsageStats called
[1970-Feb-04 18:47:52.908531]: Toolhead Abort
[1970-Feb-04 18:47:52.910820]: aborting pru with shutdown=true
[1970-Feb-04 18:47:52.913410]: Last sync period had (0,297,64464) buffer fulls due to suspend moves
[1970-Feb-04 18:47:52.915165]: Libstepper All Axis Abort
[1970-Feb-04 18:48:47.046924]: Heater manager Set Target Temperature to 0, index 0
[1970-Feb-04 18:48:47.048842]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-04 18:49:08.274585]: GetCachedToolUsageStats called
[1970-Feb-04 18:49:09.536328]: Heater manager Set Target Temperature to 180, index 0
[1970-Feb-04 18:49:09.538134]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-04 18:49:10.793994]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false
[1970-Feb-04 18:49:10.796075]: Load Sense Limit Method: 1
[1970-Feb-04 18:49:10.810813]: Last sync period had (0,297,65004) buffer fulls due to suspend moves
[1970-Feb-04 18:49:10.812800]: Libstepper All Axis Abort
[1970-Feb-04 18:49:11.628685]: HOME: 1 homing: Limit Detected!: 
[1970-Feb-04 18:49:11.641584]: Toolhead Abort
[1970-Feb-04 18:49:11.643399]: aborting pru with shutdown=true
[1970-Feb-04 18:49:11.648236]: Last sync period had (0,297,65031) buffer fulls due to suspend moves
[1970-Feb-04 18:49:11.650405]: Libstepper All Axis Abort
[1970-Feb-04 18:49:11.721587]: HOME: 1 homing: Limit Detected!: 
[1970-Feb-04 18:49:13.614631]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false
[1970-Feb-04 18:49:13.616748]: Load Sense Limit Method: 0
[1970-Feb-04 18:49:13.619359]: Last sync period had (0,297,65130) buffer fulls due to suspend moves
[1970-Feb-04 18:49:13.621525]: Libstepper All Axis Abort
[1970-Feb-04 18:49:14.409804]: HOME: 0 homing: Limit Detected!: 
[1970-Feb-04 18:49:14.411872]: Toolhead Abort
[1970-Feb-04 18:49:14.413637]: aborting pru with shutdown=true
[1970-Feb-04 18:49:14.416372]: Last sync period had (0,297,65160) buffer fulls due to suspend moves
[1970-Feb-04 18:49:14.418149]: Libstepper All Axis Abort
[1970-Feb-04 18:49:14.475423]: HOME: 0 homing: Limit Detected!: 
[1970-Feb-04 18:49:15.035009]: wait for heaters at target, wait bitmask 0x1
[1970-Feb-04 18:49:59.701624]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 18:50:05.135775]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 18:50:13.700847]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 18:50:17.821382]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false
[1970-Feb-04 18:50:22.979137]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 18:50:30.480960]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 18:50:35.740861]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 18:50:36.447830]: HOME: 2 homing: Limit Detected!: 
[1970-Feb-04 18:50:36.449685]: Toolhead Abort
[1970-Feb-04 18:50:36.452796]: aborting pru with shutdown=false
[1970-Feb-04 18:50:36.456610]: CLEAR BUFFER FAIL! in libstepper::Abort()
[1970-Feb-04 18:50:36.459099]: Last sync period had (0,297,70065) buffer fulls due to suspend moves
[1970-Feb-04 18:50:36.461117]: Libstepper All Axis Abort
[1970-Feb-04 18:50:36.512941]: HOME: 2 homing: Limit Detected!: 
[1970-Feb-04 18:50:36.720745]: HES logged: true
[1970-Feb-04 18:50:46.117330]: GAP: Query->Await
[1970-Feb-04 18:50:46.141886]: TH0: Retreived step position 11403535
[1970-Feb-04 18:50:46.207258]: wait for PRU status in get position
[1970-Feb-04 18:50:46.209095]: wait for PRU status in get position
[1970-Feb-04 18:50:46.218471]: GAP: Await->Done(Query)
[1970-Feb-04 18:50:46.253780]: Changing HES sample rate. Commanded: 30Hz; clamped to 30.7143Hz (215/7)
[1970-Feb-04 18:50:46.368766]: Syncing turned true
[1970-Feb-04 18:50:46.412709]: PRU Event: PRU_SYNC_ON(12)
[1970-Feb-04 18:50:46.414584]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Feb-04 18:50:46.492669]: Toolhead 0  ADC Error: 1
[1970-Feb-04 18:50:46.573727]: Toolhead 0 commands idle
[1970-Feb-04 18:50:46.612453]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Feb-04 18:50:46.614242]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Feb-04 18:50:46.622293]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Feb-04 18:50:46.624194]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Feb-04 18:50:46.626088]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Feb-04 18:50:46.627824]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Feb-04 18:50:46.629547]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Feb-04 18:50:46.642197]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Feb-04 18:50:46.643934]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Feb-04 18:50:46.645804]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Feb-04 18:50:46.647525]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Feb-04 18:50:49.674849]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Feb-04 18:50:53.708782]: Buffer stall ongoing: 3354
[1970-Feb-04 18:50:53.742073]: Buffer stall ongoing: 10449
[1970-Feb-04 18:50:53.896556]: Buffer stall ongoing: 42957
[1970-Feb-04 18:50:53.926810]: Last sync period had (0,0,450) buffer fulls due to suspend moves
[1970-Feb-04 18:50:53.928675]: Syncing turned false
[1970-Feb-04 18:50:53.964501]: PRU Event: PRU_SYNC_OFF(0)
[1970-Feb-04 18:50:53.966419]: Buffer stall ongoing: 49794
[1970-Feb-04 18:50:54.014845]: Toolhead 0  ADC Error: 0
[1970-Feb-04 18:50:55.073897]: HES logged: true
[1970-Feb-04 18:50:55.337897]: GetCachedToolUsageStats called
[1970-Feb-04 18:50:55.716912]: libstepper: true toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 18:50:58.533795]: GAP: Query->Await
[1970-Feb-04 18:50:58.550851]: TH0: Retreived step position 11796751
[1970-Feb-04 18:50:58.569268]: wait for PRU status in get position
[1970-Feb-04 18:50:58.572406]: wait for PRU status in get position
[1970-Feb-04 18:50:58.574175]: GAP: Await->Done(Query)
[1970-Feb-04 18:51:01.786600]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 18:51:06.568782]: Changing HES sample rate. Commanded: 215Hz; clamped to 215Hz (215/1)
[1970-Feb-04 18:51:06.993734]: GetCachedToolUsageStats called
[1970-Feb-04 18:51:07.117799]: Expecting 98616.7 steps extruded this print from 908.491 mm of plastic
[1970-Feb-04 18:51:07.342615]: Heater manager Set Target Temperature to 215, index 0
[1970-Feb-04 18:51:07.344393]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-04 18:51:07.618368]: wait for heaters at target, wait bitmask 0x1
[1970-Feb-04 18:51:56.783263]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Feb-04 18:52:01.766797]: Expend Buffer: false
[1970-Feb-04 18:52:01.872895]: Syncing turned true
[1970-Feb-04 18:52:01.958507]: PRU Event: PRU_SYNC_ON(12)
[1970-Feb-04 18:52:01.960402]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Feb-04 18:52:02.316582]: Toolhead 0  ADC Error: 1
[1970-Feb-04 18:52:02.385142]: Expected packet id: 0x77, Got packet id: 0x76, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0xa5,0x8a,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x0,0x0,0x0,0x0,0x0,0x30,0x0,0x76,0x5e,0x7a,0x7c,0x6,

[1970-Feb-04 18:52:02.387228]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-04 18:52:02.392152]: Expected packet id: 0x77, Got packet id: 0x76, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0xa5,0x8a,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x0,0x0,0x0,0x0,0x0,0x30,0x0,0x76,0x5e,0x7a,0x7c,0x6,

[1970-Feb-04 18:52:02.394241]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 2
[1970-Feb-04 18:52:02.537846]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Feb-04 18:52:02.540826]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Feb-04 18:52:02.542532]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Feb-04 18:52:02.544194]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Feb-04 18:52:02.545977]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Feb-04 18:52:02.547664]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Feb-04 18:52:02.549319]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Feb-04 18:52:02.551336]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Feb-04 18:52:02.553147]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Feb-04 18:52:02.554824]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Feb-04 18:52:02.556561]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Feb-04 18:53:18.113449]: Expected packet id: 0x71, Got packet id: 0x70, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0xe7,0x2e,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x3,0x97,0x0,0x70,0x69,0x1f,0x71,0xa7,

[1970-Feb-04 18:53:18.115493]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-04 18:53:27.239460]: Expected packet id: 0x5c, Got packet id: 0x5b, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0xee,0x86,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x1,0x97,0x0,0x5b,0xb9,0xb4,0x16,0x38,

[1970-Feb-04 18:53:27.241568]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-04 18:53:49.877333]: Steps overrun! last 65534 and just got 6
[1970-Feb-04 18:53:49.879059]: calculated 7
[1970-Feb-04 18:54:50.436012]: Expected packet id: 0xa2, Got packet id: 0xd7, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0xf,0x0,0x2d,0x0,0xd5,0x0,0xf,0x27,0x6f,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,

[1970-Feb-04 18:54:50.437939]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-04 18:56:20.773332]: GetCachedToolUsageStats called
[1970-Feb-04 18:56:22.243992]: toolhead pausing
[1970-Feb-04 18:56:22.251979]: Last sync period had (0,2904,31551) buffer fulls due to suspend moves
[1970-Feb-04 18:56:22.253833]: Syncing turned false
[1970-Feb-04 18:56:22.255502]: quack pause: true
[1970-Feb-04 18:56:22.272129]: PRU Event: PRU_SYNC_OFF(0)
[1970-Feb-04 18:56:22.299370]:  axis running: 0
[1970-Feb-04 18:56:22.377503]:  axis running: 0
[1970-Feb-04 18:56:22.413927]:  axis running: 0
[1970-Feb-04 18:56:22.445544]:  axis running: 0
[1970-Feb-04 18:56:22.475925]:  axis running: 0
[1970-Feb-04 18:56:22.507631]:  axis running: 0
[1970-Feb-04 18:56:22.547818]:  axis running: 0
[1970-Feb-04 18:56:22.579043]:  axis running: 0
[1970-Feb-04 18:56:22.609483]:  axis running: 0
[1970-Feb-04 18:56:22.683639]: Last sync period had (0,2904,31551) buffer fulls due to suspend moves
[1970-Feb-04 18:56:22.685956]: Libstepper All Axis Abort
[1970-Feb-04 18:56:22.687687]: Clear Toolhead Buffer
[1970-Feb-04 18:56:22.702616]: clear toolhead buffer acknowledged
[1970-Feb-04 18:56:22.749873]: toolhead unpausing
[1970-Feb-04 18:56:22.751840]: quack pause: false
[1970-Feb-04 18:56:22.821669]: Expend Buffer: true
[1970-Feb-04 18:56:22.853208]: Last sync period had (0,2904,31566) buffer fulls due to suspend moves
[1970-Feb-04 18:56:22.855062]: Syncing turned false
[1970-Feb-04 18:56:22.943615]: Toolhead 0  ADC Error: 0
[1970-Feb-04 18:56:22.965566]: GAP: Query->Await
[1970-Feb-04 18:56:22.984396]: TH0: Retreived step position 14090511
[1970-Feb-04 18:56:23.014277]: wait for PRU status in get position
[1970-Feb-04 18:56:23.015971]: wait for PRU status in get position
[1970-Feb-04 18:56:23.017620]: GAP: Await->Done(Query)
[1970-Feb-04 18:56:23.418539]: Heater manager Set Target Temperature to 0, index 0
[1970-Feb-04 18:56:23.420637]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-04 18:56:27.087895]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 18:56:34.906278]: libstepper: true toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 18:56:34.974870]: Heater manager Set Target Temperature to 215, index 0
[1970-Feb-04 18:56:34.976666]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-04 18:56:35.082181]: wait for heaters at target, wait bitmask 0x1
[1970-Feb-04 18:56:56.133630]: GetCachedToolUsageStats called
[1970-Feb-04 18:57:12.821313]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-04 18:57:17.477413]: Last sync period had (0,2904,34650) buffer fulls due to suspend moves
[1970-Feb-04 18:57:17.479407]: Syncing turned false
[1970-Feb-04 18:57:17.484298]: TH0: 57 failures in last 11344 packets (0.502468%)
[1970-Feb-04 18:57:17.486433]: Toolhead Abort
[1970-Feb-04 18:57:17.488172]: aborting pru with shutdown=true
[1970-Feb-04 18:57:17.491267]: Last sync period had (0,2904,34650) buffer fulls due to suspend moves
[1970-Feb-04 18:57:17.493057]: Libstepper All Axis Abort
[1970-Feb-04 18:57:17.494693]: Heater manager Set Target Temperature to 0, index 0
[1970-Feb-04 18:57:17.496405]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-04 18:57:17.573284]: Heater manager Set Target Temperature to 0, index 0
[1970-Feb-04 18:57:17.575218]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-04 18:57:17.642601]: Commanding stats update: Retract count: 3295800837
[1970-Feb-04 18:57:17.644442]: Toolhead 0 marked as possibly blocking!
[1970-Feb-04 18:57:18.277016]: Toolhead 0 done blocking!
[1970-Feb-04 18:57:18.446017]: GetToolUsageStats called in machine  state 0
[1970-Feb-04 18:57:18.447800]: Commanding tool usage stat retrieve
[1970-Feb-04 18:57:18.449491]: GetToolUsageState: Proceeds to 1
[1970-Feb-04 18:57:18.458193]: GetToolUsagState: Error from retrieve: 0x10a
[1970-Feb-04 18:57:18.489228]: Raw usage stats: retract 2296634358ct, extrusion 1599395 steps, 5170 seconds, refurbed 0 times
[1970-Feb-04 18:57:18.518769]: GetToolUsageStats called in machine  state 1
[1970-Feb-04 18:57:18.530907]: VerifyToolUsageStatsRetrieved: Done
[1970-Feb-04 18:57:18.532596]: GetToolUsageState: Proceeds to 2
[1970-Feb-04 18:57:18.650305]: GetToolUsageStats called in machine  state 2
[1970-Feb-04 18:57:18.652122]: GetToolUsageState: Done, resets
[1970-Feb-09 18:59:49.716014]: Heater manager Set Target Temperature to 215, index 0
[1970-Feb-09 18:59:49.719624]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-09 18:59:50.912688]: wait for heaters at target, wait bitmask 0x1
[1970-Feb-09 19:02:37.257656]: GetCachedToolUsageStats called
[1970-Feb-09 19:02:40.435926]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Feb-09 19:02:45.609852]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Feb-09 19:02:50.945490]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Feb-09 19:02:56.220364]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:03:01.122082]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:03:06.901481]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:03:12.399501]: Raw HES proceeding
[1970-Feb-09 19:03:12.434299]: Got raw val 24036, saturated: true
[1970-Feb-09 19:03:12.498805]: Returning HES
[1970-Feb-09 19:03:12.511302]: Sending back val 24036, saturated true
[1970-Feb-09 19:03:12.626408]: GetCachedToolUsageStats called
[1970-Feb-09 19:03:12.671476]: Toolhead Abort
[1970-Feb-09 19:03:12.673284]: aborting pru with shutdown=true
[1970-Feb-09 19:03:12.675902]: Last sync period had (0,2904,2598600) buffer fulls due to suspend moves
[1970-Feb-09 19:03:12.677840]: Libstepper All Axis Abort
[1970-Feb-09 19:03:18.579531]: Heater manager Set Target Temperature to 0, index 0
[1970-Feb-09 19:03:18.592167]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-09 19:04:27.976517]: GetCachedToolUsageStats called
[1970-Feb-09 19:04:30.765069]: Heater manager Set Target Temperature to 180, index 0
[1970-Feb-09 19:04:30.766861]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-09 19:04:31.962496]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false
[1970-Feb-09 19:04:31.964546]: Load Sense Limit Method: 1
[1970-Feb-09 19:04:31.967406]: Last sync period had (0,2904,2599149) buffer fulls due to suspend moves
[1970-Feb-09 19:04:31.969255]: Libstepper All Axis Abort
[1970-Feb-09 19:04:32.712159]: HOME: 1 homing: Limit Detected!: 
[1970-Feb-09 19:04:32.714679]: Toolhead Abort
[1970-Feb-09 19:04:32.716480]: aborting pru with shutdown=true
[1970-Feb-09 19:04:32.719045]: Last sync period had (0,2904,2599176) buffer fulls due to suspend moves
[1970-Feb-09 19:04:32.721166]: Libstepper All Axis Abort
[1970-Feb-09 19:04:32.812098]: HOME: 1 homing: Limit Detected!: 
[1970-Feb-09 19:04:33.765478]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Feb-09 19:04:34.872068]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false
[1970-Feb-09 19:04:34.874086]: Load Sense Limit Method: 0
[1970-Feb-09 19:04:34.876719]: Last sync period had (0,2904,2599284) buffer fulls due to suspend moves
[1970-Feb-09 19:04:34.878658]: Libstepper All Axis Abort
[1970-Feb-09 19:04:35.641403]: HOME: 0 homing: Limit Detected!: 
[1970-Feb-09 19:04:35.643275]: Toolhead Abort
[1970-Feb-09 19:04:35.645045]: aborting pru with shutdown=true
[1970-Feb-09 19:04:35.660838]: Last sync period had (0,2904,2599305) buffer fulls due to suspend moves
[1970-Feb-09 19:04:35.662681]: Libstepper All Axis Abort
[1970-Feb-09 19:04:35.742842]: HOME: 0 homing: Limit Detected!: 
[1970-Feb-09 19:04:36.298172]: wait for heaters at target, wait bitmask 0x1
[1970-Feb-09 19:05:00.243098]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:05:08.814352]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:05:14.146677]: GetCachedToolUsageStats called
[1970-Feb-09 19:05:15.332144]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false
[1970-Feb-09 19:05:17.230448]: GetCachedToolUsageStats called
[1970-Feb-09 19:05:17.827022]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:05:18.388227]: GetCachedToolUsageStats called
[1970-Feb-09 19:05:21.026784]: GetCachedToolUsageStats called
[1970-Feb-09 19:05:22.627076]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:05:27.920817]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:05:32.544962]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:05:34.002512]: HOME: 2 homing: Limit Detected!: 
[1970-Feb-09 19:05:34.004316]: Toolhead Abort
[1970-Feb-09 19:05:34.006009]: aborting pru with shutdown=false
[1970-Feb-09 19:05:34.008625]: Last sync period had (0,2904,2603031) buffer fulls due to suspend moves
[1970-Feb-09 19:05:34.010591]: Libstepper All Axis Abort
[1970-Feb-09 19:05:34.044020]: HOME: 2 homing: Limit Detected!: 
[1970-Feb-09 19:05:34.194381]: HES logged: true
[1970-Feb-09 19:05:43.445242]: GAP: Query->Await
[1970-Feb-09 19:05:43.461939]: TH0: Retreived step position 11927823
[1970-Feb-09 19:05:43.481473]: wait for PRU status in get position
[1970-Feb-09 19:05:43.483209]: wait for PRU status in get position
[1970-Feb-09 19:05:43.484836]: GAP: Await->Done(Query)
[1970-Feb-09 19:05:43.529939]: Changing HES sample rate. Commanded: 30Hz; clamped to 30.7143Hz (215/7)
[1970-Feb-09 19:05:43.611461]: Syncing turned true
[1970-Feb-09 19:05:43.631425]: PRU Event: PRU_SYNC_ON(12)
[1970-Feb-09 19:05:43.633274]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Feb-09 19:05:43.685382]: Toolhead 0  ADC Error: 1
[1970-Feb-09 19:05:43.769185]: Toolhead 0 commands idle
[1970-Feb-09 19:05:43.786708]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Feb-09 19:05:43.788428]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Feb-09 19:05:43.794482]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Feb-09 19:05:43.796200]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Feb-09 19:05:43.804316]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Feb-09 19:05:43.806194]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Feb-09 19:05:43.807886]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Feb-09 19:05:43.809638]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Feb-09 19:05:43.816152]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Feb-09 19:05:43.818266]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Feb-09 19:05:43.819956]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Feb-09 19:05:44.863522]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Feb-09 19:05:49.578281]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Feb-09 19:05:50.895870]: Buffer stall ongoing: 1806
[1970-Feb-09 19:05:50.936536]: Buffer stall ongoing: 10320
[1970-Feb-09 19:05:51.078955]: Buffer stall ongoing: 40506
[1970-Feb-09 19:05:51.107163]: Buffer stall ongoing: 46440
[1970-Feb-09 19:05:51.129877]: Last sync period had (0,0,528) buffer fulls due to suspend moves
[1970-Feb-09 19:05:51.132865]: Syncing turned false
[1970-Feb-09 19:05:51.164351]: PRU Event: PRU_SYNC_OFF(0)
[1970-Feb-09 19:05:51.166338]: Buffer stall ongoing: 51858
[1970-Feb-09 19:05:51.212202]: Toolhead 0  ADC Error: 0
[1970-Feb-09 19:05:52.241005]: HES logged: true
[1970-Feb-09 19:05:52.477153]: GetCachedToolUsageStats called
[1970-Feb-09 19:05:54.369273]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:05:55.540289]: GAP: Query->Await
[1970-Feb-09 19:05:55.559021]: TH0: Retreived step position 11731215
[1970-Feb-09 19:05:55.577910]: wait for PRU status in get position
[1970-Feb-09 19:05:55.579988]: wait for PRU status in get position
[1970-Feb-09 19:05:55.581982]: GAP: Await->Done(Query)
[1970-Feb-09 19:05:58.721816]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:06:03.489624]: Changing HES sample rate. Commanded: 215Hz; clamped to 215Hz (215/1)
[1970-Feb-09 19:06:03.886957]: GetCachedToolUsageStats called
[1970-Feb-09 19:06:03.999964]: Expecting 187741 steps extruded this print from 1729.54 mm of plastic
[1970-Feb-09 19:06:04.225880]: Heater manager Set Target Temperature to 215, index 0
[1970-Feb-09 19:06:04.227667]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-09 19:06:04.430264]: wait for heaters at target, wait bitmask 0x1
[1970-Feb-09 19:07:09.718204]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Feb-09 19:07:15.060579]: Expend Buffer: false
[1970-Feb-09 19:07:15.159794]: Syncing turned true
[1970-Feb-09 19:07:15.258849]: PRU Event: PRU_SYNC_ON(12)
[1970-Feb-09 19:07:15.260814]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Feb-09 19:07:15.655899]: Toolhead 0  ADC Error: 1
[1970-Feb-09 19:07:15.866984]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Feb-09 19:07:15.868747]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Feb-09 19:07:15.870671]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Feb-09 19:07:15.872595]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Feb-09 19:07:15.874300]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Feb-09 19:07:15.875999]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Feb-09 19:07:15.877717]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Feb-09 19:07:15.879606]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Feb-09 19:07:15.881522]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Feb-09 19:07:15.883852]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Feb-09 19:07:15.885577]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Feb-09 19:07:16.186580]: Expected packet id: 0xb1, Got packet id: 0xb0, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xb3,0xc4,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x0,0x0,0x0,0x0,0x0,0x38,0x0,0xb0,0x4,0x8d,0x6c,0xa1,

[1970-Feb-09 19:07:16.188485]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:07:17.116628]: Expected packet id: 0x26, Got packet id: 0x0, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xb3,0xc4,0x1,0x0,0xd7,0x0,0x0,0xac,

[1970-Feb-09 19:07:17.118517]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:07:17.462222]: Expected packet id: 0x61, Got packet id: 0x60, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xb4,0x40,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x0,0x0,0x0,0x0,0x2,0xec,0x0,0x60,0x30,0xea,0x98,0x33,

[1970-Feb-09 19:07:17.464145]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:07:17.511941]: Expected packet id: 0x6b, Got packet id: 0x0, Full packet: 
0x12,0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xb4,0x83,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x0,0x0,0x0,0x0,0xe,0x2c,0x0,0x6b,0x8,0xe,0xda,

[1970-Feb-09 19:07:17.513865]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:08:37.459281]: Steps overrun! last 65533 and just got 12
[1970-Feb-09 19:08:37.461250]: calculated 14
[1970-Feb-09 19:08:53.621806]: Expected packet id: 0x27, Got packet id: 0x1, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0xf,0x0,0x2d,0x0,0xd6,0x0,0xf,0xb,0x9b,0x1,0x0,0xd7,0x0,0x0,

[1970-Feb-09 19:08:53.624151]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:09:47.341674]: Toolhead 0 state error: 80
[1970-Feb-09 19:09:48.975292]: GetCachedToolUsageStats called
[1970-Feb-09 19:09:49.019807]: toolhead pausing
[1970-Feb-09 19:09:49.025882]: Last sync period had (0,1971,15915) buffer fulls due to suspend moves
[1970-Feb-09 19:09:49.027697]: Syncing turned false
[1970-Feb-09 19:09:49.029464]: quack pause: true
[1970-Feb-09 19:09:49.051655]: PRU Event: PRU_SYNC_OFF(0)
[1970-Feb-09 19:09:49.080259]:  axis running: 0
[1970-Feb-09 19:09:49.341176]: Last sync period had (0,1971,15915) buffer fulls due to suspend moves
[1970-Feb-09 19:09:49.343660]: Libstepper All Axis Abort
[1970-Feb-09 19:09:49.345844]: Clear Toolhead Buffer
[1970-Feb-09 19:09:49.445624]: clear toolhead buffer acknowledged
[1970-Feb-09 19:09:49.495384]: toolhead unpausing
[1970-Feb-09 19:09:49.497103]: quack pause: false
[1970-Feb-09 19:09:49.587231]: Expend Buffer: true
[1970-Feb-09 19:09:49.620449]: Last sync period had (0,1971,15936) buffer fulls due to suspend moves
[1970-Feb-09 19:09:49.622446]: Syncing turned false
[1970-Feb-09 19:09:49.731501]: GAP: Query->Await
[1970-Feb-09 19:09:49.763951]: GAP: Await
[1970-Feb-09 19:09:49.796351]: GAP: Await
[1970-Feb-09 19:09:49.811532]: Toolhead 0  ADC Error: 0
[1970-Feb-09 19:09:49.842158]: GAP: Await
[1970-Feb-09 19:09:49.875527]: GAP: Await
[1970-Feb-09 19:09:49.913680]: GAP: Await
[1970-Feb-09 19:09:49.929538]: TH0: Retreived step position 14024975
[1970-Feb-09 19:09:49.949397]: wait for PRU status in get position
[1970-Feb-09 19:09:49.951377]: wait for PRU status in get position
[1970-Feb-09 19:09:49.954173]: GAP: Await->Done(Query)
[1970-Feb-09 19:09:50.026323]: Suspend
[1970-Feb-09 19:09:50.039508]: Suspend index 721 found, A-pos 297.971
[1970-Feb-09 19:09:54.314431]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:09:55.468128]: GAP: Query->Await
[1970-Feb-09 19:09:55.536571]: GAP: Await
[1970-Feb-09 19:09:55.589245]: GAP: Await
[1970-Feb-09 19:09:55.607888]: TH0: Retreived step position 14024975
[1970-Feb-09 19:09:55.648143]: wait for PRU status in get position
[1970-Feb-09 19:09:55.660738]: wait for PRU status in get position
[1970-Feb-09 19:09:55.662548]: GAP: Await->Done(Query)
[1970-Feb-09 19:09:55.912034]: Heater manager Set Target Temperature to 215, index 0
[1970-Feb-09 19:09:55.913836]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-09 19:09:56.415932]: wait for heaters at target, wait bitmask 0x1
[1970-Feb-09 19:09:57.065477]: GetCachedToolUsageStats called
[1970-Feb-09 19:10:01.954440]: Toolhead 0 state error: 0
[1970-Feb-09 19:10:16.657569]: Toolhead 0 state error: 80
[1970-Feb-09 19:10:23.473783]: Toolhead 0 state error: 0
[1970-Feb-09 19:10:24.049401]: Heater manager Set Target Temperature to 215, index 0
[1970-Feb-09 19:10:24.061554]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-09 19:10:24.541938]: wait for heaters at target, wait bitmask 0x1
[1970-Feb-09 19:10:25.178121]: GetCachedToolUsageStats called
[1970-Feb-09 19:10:31.006178]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Feb-09 19:10:36.349770]: Toolhead 0 state error: 80
[1970-Feb-09 19:10:39.164082]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Feb-09 19:10:40.203284]: Toolhead 0 state error: 0
[1970-Feb-09 19:10:42.302272]: Toolhead 0 state error: 80
[1970-Feb-09 19:10:44.460885]: Toolhead 0 state error: 0
[1970-Feb-09 19:10:46.741834]: Toolhead 0 state error: 80
[1970-Feb-09 19:10:47.169122]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:10:51.216507]: Toolhead 0 state error: 0
[1970-Feb-09 19:10:53.105234]: Toolhead 0 state error: 80
[1970-Feb-09 19:10:57.825592]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:10:58.052756]: Toolhead 0 state error: 0
[1970-Feb-09 19:10:58.656957]: Toolhead 0 state error: 80
[1970-Feb-09 19:10:59.460996]: Toolhead 0 state error: 0
[1970-Feb-09 19:11:05.028686]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:11:12.427512]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:11:17.247282]: TH0: 64 failures in last 6594 packets (0.970579%)
[1970-Feb-09 19:11:17.249271]: Toolhead Abort
[1970-Feb-09 19:11:17.261319]: aborting pru with shutdown=false
[1970-Feb-09 19:11:17.264126]: Last sync period had (0,1971,18915) buffer fulls due to suspend moves
[1970-Feb-09 19:11:17.265904]: Libstepper All Axis Abort
[1970-Feb-09 19:11:30.496101]: Heater manager Set Target Temperature to 215, index 0
[1970-Feb-09 19:11:30.497897]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-09 19:11:30.557093]: wait for heaters at target, wait bitmask 0x1
[1970-Feb-09 19:11:31.304647]: Expend Buffer: false
[1970-Feb-09 19:11:31.348016]: Syncing turned true
[1970-Feb-09 19:11:31.383761]: PRU Event: PRU_SYNC_ON(12)
[1970-Feb-09 19:11:31.385487]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Feb-09 19:11:31.695361]: Toolhead 0  ADC Error: 1
[1970-Feb-09 19:11:32.560296]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Feb-09 19:11:32.562066]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Feb-09 19:11:32.563769]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Feb-09 19:11:32.565697]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Feb-09 19:11:32.567533]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Feb-09 19:11:32.569233]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Feb-09 19:11:32.581448]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Feb-09 19:11:32.583180]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Feb-09 19:11:32.585470]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Feb-09 19:11:32.587201]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Feb-09 19:11:32.588881]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Feb-09 19:11:33.045973]: Expend Buffer: false
[1970-Feb-09 19:13:17.101677]: Expected packet id: 0x6d, Got packet id: 0xd7, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0xd6,0x4b,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,

[1970-Feb-09 19:13:17.104054]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:13:46.114318]: Expected packet id: 0x56, Got packet id: 0x55, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0xe8,0x4,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x2,0x29,0x0,0x55,0x72,0x69,0xc,0xde,

[1970-Feb-09 19:13:46.116413]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:13:46.121616]: Expected packet id: 0x56, Got packet id: 0x55, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0xe8,0x4,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x2,0x29,0x0,0x55,0x72,0x69,0xc,0xde,

[1970-Feb-09 19:13:46.123543]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 2
[1970-Feb-09 19:14:29.277973]: Toolhead 0 : Retry: Waited 0.664821s from state change
[1970-Feb-09 19:14:56.582686]: Expected packet id: 0xa4, Got packet id: 0xa3, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0xfd,0xe5,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x1,0x75,0x0,0xa3,0x27,0x1,0x92,0xa2,

[1970-Feb-09 19:14:56.585230]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:15:00.217821]: Expected packet id: 0x7, Got packet id: 0x6, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0xff,0xc,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x1,0x57,0x0,0x6,0x5f,0x64,0xfe,0x76,

[1970-Feb-09 19:15:00.219894]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:15:02.360307]: Steps overrun! last 65531 and just got 52
[1970-Feb-09 19:15:02.362060]: calculated 56
[1970-Feb-09 19:15:21.469955]: Expected packet id: 0xb1, Got packet id: 0xb0, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x5,0xac,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x0,0xd6,0x0,0xb0,0x87,0xed,0xda,0x2f,

[1970-Feb-09 19:15:21.472104]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:15:38.201674]: Expected packet id: 0xc2, Got packet id: 0xc1, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0xe,0x19,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x3,0x85,0x0,0xc1,0x7f,0x8f,0x27,0xe,

[1970-Feb-09 19:15:38.204017]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:15:49.090551]: Expected packet id: 0x34, Got packet id: 0x11, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x11,0xfe,0x1,0x0,0xd7,

[1970-Feb-09 19:15:49.092517]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:15:50.428574]: Expected packet id: 0x61, Got packet id: 0x60, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x12,0x98,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x1,0xe6,0x0,0x60,0xad,0xb6,0xf6,0x18,

[1970-Feb-09 19:15:50.430702]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:16:49.390263]: Expected packet id: 0x39, Got packet id: 0x38, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x24,0x70,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x1,0x97,0x0,0x38,0x1b,0x10,0x14,0xab,

[1970-Feb-09 19:16:49.392221]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:16:49.397317]: Expected packet id: 0x39, Got packet id: 0x38, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x24,0x70,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x1,0x97,0x0,0x38,0x1b,0x10,0x14,0xab,

[1970-Feb-09 19:16:49.399252]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 2
[1970-Feb-09 19:17:19.998703]: Expected packet id: 0x3a, Got packet id: 0x1, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0x30,0x12,0x1,0x0,0xd7,0x0,0x0,

[1970-Feb-09 19:17:20.007765]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:17:30.515517]: Expected packet id: 0x71, Got packet id: 0x70, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x34,0xe7,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x0,0x0,0x0,0x0,0x1,0x4a,0x0,0x70,0x7f,0x47,0x63,0x48,

[1970-Feb-09 19:17:30.517418]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:17:39.913804]: Expected packet id: 0xa7, Got packet id: 0xa6, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x38,0x29,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x1,0x20,0x0,0xa6,0x7f,0x4f,0x9e,0x4c,

[1970-Feb-09 19:17:39.915737]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:17:59.656735]: Expected packet id: 0xda, Got packet id: 0xd9, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x3d,0x24,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x2,0x8c,0x0,0xd9,0x17,0x83,0x62,0xa3,

[1970-Feb-09 19:17:59.658668]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:18:01.838217]: Expected packet id: 0x34, Got packet id: 0x33, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x3e,0x3b,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x2,0xfe,0x0,0x33,0xff,0x5d,0x35,0xf5,

[1970-Feb-09 19:18:01.840331]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:18:28.175334]: Expected packet id: 0x3c, Got packet id: 0x3b, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x46,0x0,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x0,0xe3,0x0,0x3b,0xf4,0x59,0xc5,0x5f,

[1970-Feb-09 19:18:28.177241]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:18:28.182403]: Expected packet id: 0x3c, Got packet id: 0x3b, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x46,0x0,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x0,0xe3,0x0,0x3b,0xf4,0x59,0xc5,0x5f,

[1970-Feb-09 19:18:28.184314]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 2
[1970-Feb-09 19:18:28.706973]: Expected packet id: 0x5a, Got packet id: 0x59, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x46,0x75,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x3,0xb9,0x0,0x59,0x62,0x3f,0xed,0x2f,

[1970-Feb-09 19:18:28.709531]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:18:30.679330]: Expected packet id: 0xa0, Got packet id: 0x9f, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd9,0x0,0xf,0x47,0x6e,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x0,0x4e,0x0,0x9f,0xf5,0xa7,0x31,0xa5,

[1970-Feb-09 19:18:30.681633]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:18:45.974165]: Expected packet id: 0x55, Got packet id: 0x54, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x4a,0xe1,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x0,0x67,0x0,0x54,0x4c,0x21,0x2e,0x9d,

[1970-Feb-09 19:18:45.976367]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:18:50.201036]: Expected packet id: 0xda, Got packet id: 0xd9, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x4c,0x5e,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x5,0x58,0x0,0xd9,0xaf,0xaa,0x1d,0xca,

[1970-Feb-09 19:18:50.203078]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:18:52.020865]: Expected packet id: 0x29, Got packet id: 0x28, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x4d,0x4b,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x1,0x41,0x0,0x28,0x2a,0x59,0xb7,0xca,

[1970-Feb-09 19:18:52.022817]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:19:23.046872]: Expected packet id: 0xa6, Got packet id: 0xa5, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x56,0x78,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x1,0x99,0x0,0xa5,0x93,0x9d,0xe6,0x69,

[1970-Feb-09 19:19:23.048823]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:19:42.629654]: Expected packet id: 0xd5, Got packet id: 0xd4, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0x5b,0x69,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x2,0x71,0x0,0xd4,0xe8,0xbc,0x3c,0xab,

[1970-Feb-09 19:19:42.631803]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:19:45.039674]: Expected packet id: 0x38, Got packet id: 0x37, Full packet: 
0xf3,0x0,0x0,0x2b,0x0,0xd7,0x0,0xf,0x5c,0x94,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x1,0xf3,0x0,0x37,0x93,0x46,0x1f,0xec,

[1970-Feb-09 19:19:45.042180]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:20:05.062469]: Expected packet id: 0x7a, Got packet id: 0x79, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x62,0xf3,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x0,0x0,0x0,0x0,0x0,0xaa,0x0,0x79,0x27,0x81,0x26,0xf3,

[1970-Feb-09 19:20:05.064422]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:20:27.675919]: toolhead pausing
[1970-Feb-09 19:20:27.680505]: Last sync period had (0,14463,56052) buffer fulls due to suspend moves
[1970-Feb-09 19:20:27.682293]: Syncing turned false
[1970-Feb-09 19:20:27.684558]: quack pause: true
[1970-Feb-09 19:20:27.737824]: PRU Event: PRU_SYNC_OFF(0)
[1970-Feb-09 19:20:27.770630]:  axis running: 0
[1970-Feb-09 19:20:27.808603]:  axis running: 0
[1970-Feb-09 19:20:27.842940]:  axis running: 0
[1970-Feb-09 19:20:27.883040]:  axis running: 0
[1970-Feb-09 19:20:27.921744]:  axis running: 0
[1970-Feb-09 19:20:27.964757]:  axis running: 0
[1970-Feb-09 19:20:27.998338]:  axis running: 0
[1970-Feb-09 19:20:28.043430]:  axis running: 0
[1970-Feb-09 19:20:28.106208]:  axis running: 0
[1970-Feb-09 19:20:28.157728]:  axis running: 0
[1970-Feb-09 19:20:28.192458]:  axis running: 0
[1970-Feb-09 19:20:28.288657]: Last sync period had (0,14463,56052) buffer fulls due to suspend moves
[1970-Feb-09 19:20:28.292556]: Libstepper All Axis Abort
[1970-Feb-09 19:20:28.294356]: Clear Toolhead Buffer
[1970-Feb-09 19:20:28.310331]: clear toolhead buffer acknowledged
[1970-Feb-09 19:20:28.361665]: toolhead unpausing
[1970-Feb-09 19:20:28.363564]: quack pause: false
[1970-Feb-09 19:20:28.435271]: Expend Buffer: true
[1970-Feb-09 19:20:28.467457]: Last sync period had (0,14463,56067) buffer fulls due to suspend moves
[1970-Feb-09 19:20:28.469537]: Syncing turned false
[1970-Feb-09 19:20:28.520642]: Toolhead 0  ADC Error: 0
[1970-Feb-09 19:20:28.552134]: GAP: Query->Await
[1970-Feb-09 19:20:28.586900]: TH0: Retreived step position 14156047
[1970-Feb-09 19:20:28.627564]: wait for PRU status in get position
[1970-Feb-09 19:20:28.629251]: wait for PRU status in get position
[1970-Feb-09 19:20:28.641251]: GAP: Await->Done(Query)
[1970-Feb-09 19:20:28.826077]: Suspend
[1970-Feb-09 19:20:28.868638]: Suspend index 5956 found, A-pos 814.778
[1970-Feb-09 19:20:31.981257]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Feb-09 19:20:34.606561]: GAP: Query->Await
[1970-Feb-09 19:20:34.642021]: TH0: Retreived step position 14090511
[1970-Feb-09 19:20:34.677129]: wait for PRU status in get position
[1970-Feb-09 19:20:34.678852]: wait for PRU status in get position
[1970-Feb-09 19:20:34.690914]: GAP: Await->Done(Query)
[1970-Feb-09 19:22:36.888569]: Heater manager Set Target Temperature to 215, index 0
[1970-Feb-09 19:22:36.890662]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-09 19:22:37.375488]: wait for heaters at target, wait bitmask 0x1
[1970-Feb-09 19:22:38.433635]: Expend Buffer: false
[1970-Feb-09 19:22:38.917076]: Syncing turned true
[1970-Feb-09 19:22:38.953349]: PRU Event: PRU_SYNC_ON(12)
[1970-Feb-09 19:22:38.955217]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Feb-09 19:22:39.295457]: Toolhead 0  ADC Error: 1
[1970-Feb-09 19:22:40.402746]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Feb-09 19:22:40.404508]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Feb-09 19:22:40.406269]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Feb-09 19:22:40.408137]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Feb-09 19:22:40.409884]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Feb-09 19:22:40.421948]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Feb-09 19:22:40.423971]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Feb-09 19:22:40.425871]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Feb-09 19:22:40.427609]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Feb-09 19:22:40.429334]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Feb-09 19:22:40.441438]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Feb-09 19:22:40.693536]: Expected packet id: 0x74, Got packet id: 0x73, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x69,0x10,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x2,0x80,0x8,0x0,0x73,0x26,0x22,0xfc,0x9b,

[1970-Feb-09 19:22:40.695642]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:22:41.037685]: Expend Buffer: false
[1970-Feb-09 19:22:41.486565]: Expected packet id: 0x8b, Got packet id: 0x69, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x69,0x10,0x1,0x0,0xd7,

[1970-Feb-09 19:22:41.488647]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:22:41.545252]: Expected packet id: 0x97, Got packet id: 0x96, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x69,0x10,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x2,0x45,0x40,0x0,0x96,0xc9,0x58,0x28,0x20,

[1970-Feb-09 19:22:41.547332]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:23:00.858265]: Expected packet id: 0xbe, Got packet id: 0xbd, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x6c,0x2f,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x2,0xa9,0x0,0xbd,0xe2,0x7,0x2,0x64,

[1970-Feb-09 19:23:00.860423]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:23:50.888312]: Expected packet id: 0x5d, Got packet id: 0x5c, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x7a,0x1,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x2,0xd4,0x0,0x5c,0xbf,0x3f,0x7d,0xfb,

[1970-Feb-09 19:23:50.890588]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:23:50.895580]: Expected packet id: 0x5d, Got packet id: 0x5c, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x7a,0x1,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x2,0xd4,0x0,0x5c,0xbf,0x3f,0x7d,0xfb,

[1970-Feb-09 19:23:50.897648]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 2
[1970-Feb-09 19:23:51.876002]: Expected packet id: 0x87, Got packet id: 0x86, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x7a,0x77,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x0,0xd0,0x0,0x86,0x91,0x2b,0x8c,0x43,

[1970-Feb-09 19:23:51.877936]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:23:55.387778]: Toolhead 0 : Retry: Waited 0.705986s from state change
[1970-Feb-09 19:24:07.684318]: Expected packet id: 0x6c, Got packet id: 0x6b, Full packet: 
0xf3,0x0,0x0,0x2b,0x0,0xd6,0x0,0xf,0x7e,0x38,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x0,0x5,0x0,0x6b,0xef,0x73,0x18,0x44,

[1970-Feb-09 19:24:07.686278]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:24:17.566146]: Expected packet id: 0x37, Got packet id: 0x36, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd3,0x0,0xf,0x81,0x91,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x0,0x3d,0x0,0x36,0x9a,0x5f,0xfe,0x68,

[1970-Feb-09 19:24:17.568232]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:24:17.741808]: Expected packet id: 0x4b, Got packet id: 0xf3, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,

[1970-Feb-09 19:24:17.743869]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:24:22.435659]: Expected packet id: 0xdd, Got packet id: 0xdc, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd4,0x0,0xf,0x83,0x5a,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x0,0x63,0x0,0xdc,0x7d,0x3b,0xb7,0xc2,

[1970-Feb-09 19:24:22.437607]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:24:40.208536]: Expected packet id: 0xe7, Got packet id: 0x46, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x87,0x9c,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x0,0x0,0x0,

[1970-Feb-09 19:24:40.218921]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:24:42.711613]: Expected packet id: 0x23, Got packet id: 0x0, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x88,0x78,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,

[1970-Feb-09 19:24:42.713549]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:24:43.011615]: Expected packet id: 0x3c, Got packet id: 0x3b, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x88,0xc4,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x0,0xfb,0x0,0x3b,0x72,0x9f,0x94,0xc,

[1970-Feb-09 19:24:43.013552]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:25:03.666038]: Expected packet id: 0xac, Got packet id: 0xab, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0x8e,0xbe,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x3,0xf9,0x0,0xab,0x64,0xbc,0x62,0x62,

[1970-Feb-09 19:25:03.667971]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:25:03.673215]: Expected packet id: 0xac, Got packet id: 0xab, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0x8e,0xbe,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x3,0xf9,0x0,0xab,0x64,0xbc,0x62,0x62,

[1970-Feb-09 19:25:03.675149]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 2
[1970-Feb-09 19:25:37.028645]: Expected packet id: 0x79, Got packet id: 0x78, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd4,0x0,0xf,0x98,0x95,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x2,0x1c,0x0,0x78,0x1f,0x16,0xa5,0x3e,

[1970-Feb-09 19:25:37.030998]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:26:02.941684]: Expected packet id: 0x3d, Got packet id: 0x3c, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0x9f,0xd6,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x0,0x23,0x0,0x3c,0x7f,0xf0,0x6c,0x57,

[1970-Feb-09 19:26:02.943631]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:26:08.111158]: Expected packet id: 0xdf, Got packet id: 0xde, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd3,0x0,0xf,0xa1,0xc1,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x2,0x40,0x0,0xde,0x86,0x18,0x20,0x83,

[1970-Feb-09 19:26:08.113105]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:26:30.058040]: Expected packet id: 0x76, Got packet id: 0x75, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0xa7,0xd5,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x1,0xfe,0x0,0x75,0x12,0x3c,0xf7,0x31,

[1970-Feb-09 19:26:30.059947]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:26:47.813409]: Expected packet id: 0x8a, Got packet id: 0x89, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd1,0x0,0xf,0xac,0xd4,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x0,0x0,0x0,0x0,0x1,0x5f,0x0,0x89,0xcc,0x7d,0xcc,0x1d,

[1970-Feb-09 19:26:47.815436]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:26:53.097469]: Expected packet id: 0x4c, Got packet id: 0x0, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd1,0x0,0xf,0xae,0xf0,0x1,

[1970-Feb-09 19:26:53.099407]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:26:58.158425]: Expected packet id: 0xec, Got packet id: 0xeb, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd1,0x0,0xf,0xb0,0xc7,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x0,0xe6,0x0,0xeb,0x52,0xbc,0x45,0x60,

[1970-Feb-09 19:26:58.160557]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:27:14.441113]: Expected packet id: 0xc0, Got packet id: 0xb4, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xb4,0xc2,0x1,0x0,0xd7,

[1970-Feb-09 19:27:14.443072]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:27:17.483022]: Expected packet id: 0x19, Got packet id: 0x18, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0xb5,0x86,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x3,0x97,0x0,0x18,0x1b,0x24,0x5e,0xd2,

[1970-Feb-09 19:27:17.490700]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:27:20.520606]: Expected packet id: 0x7d, Got packet id: 0x7c, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0xb7,0x2e,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x1,0x1f,0x0,0x7c,0x6b,0x2e,0xbc,0x6d,

[1970-Feb-09 19:27:20.522565]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:27:20.568292]: Expected packet id: 0x87, Got packet id: 0x86, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0xb7,0x30,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x2,0xdb,0x0,0x86,0x35,0x6a,0x1b,0x81,

[1970-Feb-09 19:27:20.570428]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:27:20.641842]: Expected packet id: 0x98, Got packet id: 0x97, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd9,0x0,0xf,0xb7,0x3a,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x4,0x5c,0x0,0x97,0x78,0xad,0x98,0xa,

[1970-Feb-09 19:27:20.644085]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:27:36.434630]: Expected packet id: 0x4f, Got packet id: 0x4e, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd4,0x0,0xf,0xba,0xf7,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x4,0x1c,0x0,0x4e,0x3a,0xcd,0xd5,0x31,

[1970-Feb-09 19:27:36.436547]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:27:39.432423]: Expected packet id: 0xa2, Got packet id: 0xa1, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd3,0x0,0xf,0xbc,0xcf,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x1,0xdb,0x0,0xa1,0x67,0xbb,0xf,0xcf,

[1970-Feb-09 19:27:39.434359]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:27:39.439784]: Expected packet id: 0xa2, Got packet id: 0xa1, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd3,0x0,0xf,0xbc,0xcf,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x1,0xdb,0x0,0xa1,0x67,0xbb,0xf,0xcf,

[1970-Feb-09 19:27:39.441926]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 2
[1970-Feb-09 19:27:40.186890]: Expected packet id: 0xbd, Got packet id: 0x0, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd3,0x0,0xf,0xbd,0x8a,0x1,0x0,0xd7,0x0,0x0,0xac,

[1970-Feb-09 19:27:40.188971]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:27:47.431894]: Expected packet id: 0xb7, Got packet id: 0xb6, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd4,0x0,0xf,0xbf,0x3a,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x0,0x6d,0x0,0xb6,0x98,0x42,0x4e,0x77,

[1970-Feb-09 19:27:47.433861]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:27:47.541893]: Expected packet id: 0xc1, Got packet id: 0xf, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd4,0x0,0xf,0xbf,0x5a,0x1,0x0,

[1970-Feb-09 19:27:47.543841]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:28:11.051678]: toolhead pausing
[1970-Feb-09 19:28:11.056082]: Last sync period had (0,9570,29283) buffer fulls due to suspend moves
[1970-Feb-09 19:28:11.057844]: Syncing turned false
[1970-Feb-09 19:28:11.059560]: quack pause: true
[1970-Feb-09 19:28:11.121820]: PRU Event: PRU_SYNC_OFF(0)
[1970-Feb-09 19:28:11.143918]:  axis running: 0
[1970-Feb-09 19:28:11.197355]:  axis running: 0
[1970-Feb-09 19:28:11.248658]:  axis running: 0
[1970-Feb-09 19:28:11.284452]:  axis running: 0
[1970-Feb-09 19:28:11.319435]:  axis running: 0
[1970-Feb-09 19:28:11.358950]:  axis running: 0
[1970-Feb-09 19:28:11.494178]: Last sync period had (0,9570,29283) buffer fulls due to suspend moves
[1970-Feb-09 19:28:11.496526]: Libstepper All Axis Abort
[1970-Feb-09 19:28:11.498259]: Clear Toolhead Buffer
[1970-Feb-09 19:28:11.517623]: clear toolhead buffer acknowledged
[1970-Feb-09 19:28:11.568294]: toolhead unpausing
[1970-Feb-09 19:28:11.570194]: quack pause: false
[1970-Feb-09 19:28:11.644560]: Expend Buffer: true
[1970-Feb-09 19:28:11.677955]: Last sync period had (0,9570,29298) buffer fulls due to suspend moves
[1970-Feb-09 19:28:11.680398]: Syncing turned false
[1970-Feb-09 19:28:11.729857]: Toolhead 0  ADC Error: 0
[1970-Feb-09 19:28:11.760540]: GAP: Query->Await
[1970-Feb-09 19:28:11.781198]: TH0: Retreived step position 14090511
[1970-Feb-09 19:28:11.800767]: wait for PRU status in get position
[1970-Feb-09 19:28:11.802476]: wait for PRU status in get position
[1970-Feb-09 19:28:11.804287]: GAP: Await->Done(Query)
[1970-Feb-09 19:28:11.881487]: Suspend
[1970-Feb-09 19:28:11.907549]: Suspend index 9415 found, A-pos 1040.32
[1970-Feb-09 19:28:14.192806]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Feb-09 19:28:17.585959]: GAP: Query->Await
[1970-Feb-09 19:28:17.601618]: TH0: Retreived step position 14024975
[1970-Feb-09 19:28:17.629334]: wait for PRU status in get position
[1970-Feb-09 19:28:17.641397]: wait for PRU status in get position
[1970-Feb-09 19:28:17.643075]: GAP: Await->Done(Query)
[1970-Feb-09 19:30:42.051567]: Toolhead 0 state error: 56
[1970-Feb-09 19:30:43.417096]: Toolhead 0 state error: 0
[1970-Feb-09 19:30:54.867999]: GetCachedToolUsageStats called
[1970-Feb-09 19:30:56.404239]: toolhead pausing
[1970-Feb-09 19:30:56.412859]: Last sync period had (0,9570,31509) buffer fulls due to suspend moves
[1970-Feb-09 19:30:56.414679]: Syncing turned false
[1970-Feb-09 19:30:56.416376]: quack pause: true
[1970-Feb-09 19:30:56.609408]: Last sync period had (0,9570,31518) buffer fulls due to suspend moves
[1970-Feb-09 19:30:56.611444]: Libstepper All Axis Abort
[1970-Feb-09 19:30:56.613176]: Clear Toolhead Buffer
[1970-Feb-09 19:30:56.638361]: clear toolhead buffer acknowledged
[1970-Feb-09 19:30:56.718423]: toolhead unpausing
[1970-Feb-09 19:30:56.732039]: quack pause: false
[1970-Feb-09 19:30:56.834648]: Expend Buffer: true
[1970-Feb-09 19:30:56.882926]: Last sync period had (0,9570,31533) buffer fulls due to suspend moves
[1970-Feb-09 19:30:56.885886]: Syncing turned false
[1970-Feb-09 19:30:57.006077]: GAP: Query->Await
[1970-Feb-09 19:30:57.041340]: TH0: Retreived step position 13697295
[1970-Feb-09 19:30:57.130607]: wait for PRU status in get position
[1970-Feb-09 19:30:57.132317]: wait for PRU status in get position
[1970-Feb-09 19:30:57.133973]: GAP: Await->Done(Query)
[1970-Feb-09 19:30:57.282213]: Heater manager Set Target Temperature to 0, index 0
[1970-Feb-09 19:30:57.284022]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-09 19:31:00.925028]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:31:03.624990]: Heater manager Set Target Temperature to 215, index 0
[1970-Feb-09 19:31:03.626808]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-09 19:31:03.722333]: wait for heaters at target, wait bitmask 0x1
[1970-Feb-09 19:31:42.250701]: Last sync period had (0,9570,34212) buffer fulls due to suspend moves
[1970-Feb-09 19:31:42.252539]: Syncing turned false
[1970-Feb-09 19:31:42.254307]: TH0: 375 failures in last 35384 packets (1.0598%)
[1970-Feb-09 19:31:42.256391]: Toolhead Abort
[1970-Feb-09 19:31:42.258102]: aborting pru with shutdown=true
[1970-Feb-09 19:31:42.262130]: CLEAR BUFFER FAIL! in libstepper::Abort()
[1970-Feb-09 19:31:42.264695]: Last sync period had (0,9570,34212) buffer fulls due to suspend moves
[1970-Feb-09 19:31:42.266615]: Libstepper All Axis Abort
[1970-Feb-09 19:31:42.272010]: Heater manager Set Target Temperature to 0, index 0
[1970-Feb-09 19:31:42.273899]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-09 19:31:42.364562]: Heater manager Set Target Temperature to 0, index 0
[1970-Feb-09 19:31:42.366366]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-09 19:31:42.429889]: Commanding stats update: Retract count: 2296634594
[1970-Feb-09 19:31:42.441945]: Toolhead 0 marked as possibly blocking!
[1970-Feb-09 19:31:43.036352]: Toolhead 0 done blocking!
[1970-Feb-09 19:31:43.147191]: GetToolUsageStats called in machine  state 0
[1970-Feb-09 19:31:43.148945]: Commanding tool usage stat retrieve
[1970-Feb-09 19:31:43.150829]: GetToolUsageState: Proceeds to 1
[1970-Feb-09 19:31:43.152608]: GetToolUsagState: Error from retrieve: 0x10a
[1970-Feb-09 19:31:43.168282]: Raw usage stats: retract 298301656ct, extrusion 1797704 steps, 6160 seconds, refurbed 0 times
[1970-Feb-09 19:31:43.245066]: GetToolUsageStats called in machine  state 1
[1970-Feb-09 19:31:43.246835]: VerifyToolUsageStatsRetrieved: Done
[1970-Feb-09 19:31:43.248623]: GetToolUsageState: Proceeds to 2
[1970-Feb-09 19:31:43.279266]: GetToolUsageStats called in machine  state 2
[1970-Feb-09 19:31:43.281263]: GetToolUsageState: Done, resets
[1970-Feb-09 19:31:57.634513]: GetCachedToolUsageStats called
[1970-Feb-09 19:32:00.130986]: Heater manager Set Target Temperature to 180, index 0
[1970-Feb-09 19:32:00.132776]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-09 19:32:01.346615]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false
[1970-Feb-09 19:32:01.348639]: Load Sense Limit Method: 1
[1970-Feb-09 19:32:01.361636]: Last sync period had (0,9570,34464) buffer fulls due to suspend moves
[1970-Feb-09 19:32:01.364135]: Libstepper All Axis Abort
[1970-Feb-09 19:32:02.138790]: HOME: 1 homing: Limit Detected!: 
[1970-Feb-09 19:32:02.141046]: Toolhead Abort
[1970-Feb-09 19:32:02.142818]: aborting pru with shutdown=true
[1970-Feb-09 19:32:02.145472]: Last sync period had (0,9570,34497) buffer fulls due to suspend moves
[1970-Feb-09 19:32:02.147238]: Libstepper All Axis Abort
[1970-Feb-09 19:32:02.252062]: HOME: 1 homing: Limit Detected!: 
[1970-Feb-09 19:32:04.118859]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false
[1970-Feb-09 19:32:04.121118]: Load Sense Limit Method: 0
[1970-Feb-09 19:32:04.123852]: Last sync period had (0,9570,34605) buffer fulls due to suspend moves
[1970-Feb-09 19:32:04.125623]: Libstepper All Axis Abort
[1970-Feb-09 19:32:04.882691]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Feb-09 19:32:04.944084]: HOME: 0 homing: Limit Detected!: 
[1970-Feb-09 19:32:04.945940]: Toolhead Abort
[1970-Feb-09 19:32:04.948448]: aborting pru with shutdown=true
[1970-Feb-09 19:32:04.968303]: Last sync period had (0,9570,34635) buffer fulls due to suspend moves
[1970-Feb-09 19:32:04.970307]: Libstepper All Axis Abort
[1970-Feb-09 19:32:05.058250]: HOME: 0 homing: Limit Detected!: 
[1970-Feb-09 19:32:05.595398]: wait for heaters at target, wait bitmask 0x1
[1970-Feb-09 19:32:58.612495]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:33:10.460960]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false
[1970-Feb-09 19:33:11.511865]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:33:16.738516]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:33:21.898858]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:33:26.420926]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:33:29.059628]: HOME: 2 homing: Limit Detected!: 
[1970-Feb-09 19:33:29.071861]: Toolhead Abort
[1970-Feb-09 19:33:29.073616]: aborting pru with shutdown=false
[1970-Feb-09 19:33:29.085284]: CLEAR BUFFER FAIL! in libstepper::Abort()
[1970-Feb-09 19:33:29.087881]: Last sync period had (0,9570,39741) buffer fulls due to suspend moves
[1970-Feb-09 19:33:29.089776]: Libstepper All Axis Abort
[1970-Feb-09 19:33:29.130463]: HOME: 2 homing: Limit Detected!: 
[1970-Feb-09 19:33:29.274981]: HES logged: true
[1970-Feb-09 19:33:38.551079]: GAP: Query->Await
[1970-Feb-09 19:33:38.568681]: TH0: Retreived step position 11403535
[1970-Feb-09 19:33:38.586516]: wait for PRU status in get position
[1970-Feb-09 19:33:38.588178]: wait for PRU status in get position
[1970-Feb-09 19:33:38.589782]: GAP: Await->Done(Query)
[1970-Feb-09 19:33:38.677960]: Changing HES sample rate. Commanded: 30Hz; clamped to 30.7143Hz (215/7)
[1970-Feb-09 19:33:38.767421]: Syncing turned true
[1970-Feb-09 19:33:38.794714]: PRU Event: PRU_SYNC_ON(12)
[1970-Feb-09 19:33:38.796409]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Feb-09 19:33:38.857578]: Toolhead 0  ADC Error: 1
[1970-Feb-09 19:33:38.938234]: Toolhead 0 commands idle
[1970-Feb-09 19:33:38.965918]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Feb-09 19:33:38.967900]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Feb-09 19:33:38.969708]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Feb-09 19:33:38.971584]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Feb-09 19:33:38.973236]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Feb-09 19:33:38.974944]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Feb-09 19:33:38.976736]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Feb-09 19:33:38.978401]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Feb-09 19:33:38.980230]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Feb-09 19:33:38.981911]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Feb-09 19:33:38.983682]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Feb-09 19:33:39.487150]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Feb-09 19:33:46.117626]: Buffer stall ongoing: 13287
[1970-Feb-09 19:33:46.406529]: Buffer stall ongoing: 74304
[1970-Feb-09 19:33:46.443728]: Last sync period had (0,0,285) buffer fulls due to suspend moves
[1970-Feb-09 19:33:46.445537]: Syncing turned false
[1970-Feb-09 19:33:46.502926]: PRU Event: PRU_SYNC_OFF(0)
[1970-Feb-09 19:33:46.504795]: Buffer stall ongoing: 82560
[1970-Feb-09 19:33:46.625531]: Toolhead 0  ADC Error: 0
[1970-Feb-09 19:33:47.633417]: HES logged: true
[1970-Feb-09 19:33:47.905736]: GetCachedToolUsageStats called
[1970-Feb-09 19:33:48.763524]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:33:51.188121]: GAP: Query->Await
[1970-Feb-09 19:33:51.214385]: TH0: Retreived step position 11796751
[1970-Feb-09 19:33:51.238747]: wait for PRU status in get position
[1970-Feb-09 19:33:51.240756]: wait for PRU status in get position
[1970-Feb-09 19:33:51.242400]: GAP: Await->Done(Query)
[1970-Feb-09 19:33:56.133331]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:33:59.173974]: Changing HES sample rate. Commanded: 215Hz; clamped to 215Hz (215/1)
[1970-Feb-09 19:33:59.587331]: GetCachedToolUsageStats called
[1970-Feb-09 19:33:59.801353]: Expecting 103882 steps extruded this print from 957 mm of plastic
[1970-Feb-09 19:34:00.118121]: Heater manager Set Target Temperature to 215, index 0
[1970-Feb-09 19:34:00.119927]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-09 19:34:00.419662]: wait for heaters at target, wait bitmask 0x1
[1970-Feb-09 19:34:09.218009]: GetCachedToolUsageStats called
[1970-Feb-09 19:34:10.779348]: GetCachedToolUsageStats called
[1970-Feb-09 19:34:12.447690]: GetCachedToolUsageStats called
[1970-Feb-09 19:34:18.321044]: GetCachedToolUsageStats called
[1970-Feb-09 19:34:23.282730]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:34:28.629388]: Heater manager Set Target Temperature to 215, index 0
[1970-Feb-09 19:34:28.641559]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-09 19:34:28.812653]: wait for heaters at target, wait bitmask 0x1
[1970-Feb-09 19:34:35.451849]: Last sync period had (0,0,2700) buffer fulls due to suspend moves
[1970-Feb-09 19:34:35.453681]: Syncing turned false
[1970-Feb-09 19:34:35.455605]: Toolhead Abort
[1970-Feb-09 19:34:35.459119]: aborting pru with shutdown=true
[1970-Feb-09 19:34:35.462077]: Last sync period had (0,0,2700) buffer fulls due to suspend moves
[1970-Feb-09 19:34:35.463868]: Libstepper All Axis Abort
[1970-Feb-09 19:34:35.465678]: Heater manager Set Target Temperature to 0, index 0
[1970-Feb-09 19:34:35.467425]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-09 19:34:35.586974]: Heater manager Set Target Temperature to 0, index 0
[1970-Feb-09 19:34:35.588807]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-09 19:34:35.668279]: Commanding stats update: Retract count: 298301656
[1970-Feb-09 19:34:35.670219]: Toolhead 0 marked as possibly blocking!
[1970-Feb-09 19:34:36.345647]: Toolhead 0 done blocking!
[1970-Feb-09 19:34:36.521739]: GetToolUsageStats called in machine  state 0
[1970-Feb-09 19:34:36.523555]: Commanding tool usage stat retrieve
[1970-Feb-09 19:34:36.525249]: GetToolUsageState: Proceeds to 1
[1970-Feb-09 19:34:36.531377]: GetToolUsagState: Error from retrieve: 0x10a
[1970-Feb-09 19:34:36.561741]: Raw usage stats: retract 596603312ct, extrusion 1802806 steps, 6166 seconds, refurbed 0 times
[1970-Feb-09 19:34:36.612043]: GetToolUsageStats called in machine  state 1
[1970-Feb-09 19:34:36.613901]: VerifyToolUsageStatsRetrieved: Done
[1970-Feb-09 19:34:36.615558]: GetToolUsageState: Proceeds to 2
[1970-Feb-09 19:34:36.668615]: GetToolUsageStats called in machine  state 2
[1970-Feb-09 19:34:36.690892]: GetToolUsageState: Done, resets
[1970-Feb-09 19:34:48.676719]: Heater manager Set Target Temperature to 215, index 0
[1970-Feb-09 19:34:48.678542]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-09 19:34:49.944480]: wait for heaters at target, wait bitmask 0x1
[1970-Feb-09 19:35:14.824517]: GetCachedToolUsageStats called
[1970-Feb-09 19:35:17.908078]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Feb-09 19:35:25.042925]: Raw HES proceeding
[1970-Feb-09 19:35:25.057852]: Got raw val 24024, saturated: true
[1970-Feb-09 19:35:25.354832]: Returning HES
[1970-Feb-09 19:35:25.357867]: Sending back val 24024, saturated true
[1970-Feb-09 19:35:25.509018]: GetCachedToolUsageStats called
[1970-Feb-09 19:35:25.563413]: Toolhead Abort
[1970-Feb-09 19:35:25.565199]: aborting pru with shutdown=true
[1970-Feb-09 19:35:25.571274]: Last sync period had (0,0,4473) buffer fulls due to suspend moves
[1970-Feb-09 19:35:25.573180]: Libstepper All Axis Abort
[1970-Feb-09 19:35:30.698607]: Heater manager Set Target Temperature to 0, index 0
[1970-Feb-09 19:35:30.700756]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-09 19:35:36.054510]: GetCachedToolUsageStats called
[1970-Feb-09 19:35:38.367010]: Heater manager Set Target Temperature to 180, index 0
[1970-Feb-09 19:35:38.368820]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-09 19:35:39.465332]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false
[1970-Feb-09 19:35:39.468210]: Load Sense Limit Method: 1
[1970-Feb-09 19:35:39.471200]: Last sync period had (0,0,4656) buffer fulls due to suspend moves
[1970-Feb-09 19:35:39.473075]: Libstepper All Axis Abort
[1970-Feb-09 19:35:40.385068]: HOME: 1 homing: Limit Detected!: 
[1970-Feb-09 19:35:40.386938]: Toolhead Abort
[1970-Feb-09 19:35:40.388709]: aborting pru with shutdown=true
[1970-Feb-09 19:35:40.393207]: Last sync period had (0,0,4683) buffer fulls due to suspend moves
[1970-Feb-09 19:35:40.395089]: Libstepper All Axis Abort
[1970-Feb-09 19:35:40.442630]: HOME: 1 homing: Limit Detected!: 
[1970-Feb-09 19:35:40.986517]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Feb-09 19:35:42.404501]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false
[1970-Feb-09 19:35:42.406677]: Load Sense Limit Method: 0
[1970-Feb-09 19:35:42.409329]: Last sync period had (0,0,4776) buffer fulls due to suspend moves
[1970-Feb-09 19:35:42.411373]: Libstepper All Axis Abort
[1970-Feb-09 19:35:43.201151]: HOME: 0 homing: Limit Detected!: 
[1970-Feb-09 19:35:43.203006]: Toolhead Abort
[1970-Feb-09 19:35:43.204756]: aborting pru with shutdown=true
[1970-Feb-09 19:35:43.207473]: Last sync period had (0,0,4806) buffer fulls due to suspend moves
[1970-Feb-09 19:35:43.209491]: Libstepper All Axis Abort
[1970-Feb-09 19:35:43.252033]: HOME: 0 homing: Limit Detected!: 
[1970-Feb-09 19:35:43.838995]: wait for heaters at target, wait bitmask 0x1
[1970-Feb-09 19:36:49.385518]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:36:57.880381]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:37:03.884618]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false
[1970-Feb-09 19:37:07.444341]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:37:13.464674]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:37:18.701115]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:37:22.465273]: HOME: 2 homing: Limit Detected!: 
[1970-Feb-09 19:37:22.467150]: Toolhead Abort
[1970-Feb-09 19:37:22.469031]: aborting pru with shutdown=false
[1970-Feb-09 19:37:22.471836]: Last sync period had (0,0,10773) buffer fulls due to suspend moves
[1970-Feb-09 19:37:22.473639]: Libstepper All Axis Abort
[1970-Feb-09 19:37:22.508778]: HOME: 2 homing: Limit Detected!: 
[1970-Feb-09 19:37:22.671586]: HES logged: true
[1970-Feb-09 19:37:27.723657]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Feb-09 19:37:32.114919]: GAP: Query->Await
[1970-Feb-09 19:37:32.158394]: TH0: Retreived step position 11337999
[1970-Feb-09 19:37:32.175637]: wait for PRU status in get position
[1970-Feb-09 19:37:32.177416]: wait for PRU status in get position
[1970-Feb-09 19:37:32.179193]: GAP: Await->Done(Query)
[1970-Feb-09 19:37:32.227823]: Changing HES sample rate. Commanded: 30Hz; clamped to 30.7143Hz (215/7)
[1970-Feb-09 19:37:32.315175]: Syncing turned true
[1970-Feb-09 19:37:32.355064]: PRU Event: PRU_SYNC_ON(12)
[1970-Feb-09 19:37:32.356923]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Feb-09 19:37:32.413963]: Toolhead 0  ADC Error: 1
[1970-Feb-09 19:37:32.460512]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Feb-09 19:37:32.462298]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Feb-09 19:37:32.464374]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Feb-09 19:37:32.466117]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Feb-09 19:37:32.467993]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Feb-09 19:37:32.469709]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Feb-09 19:37:32.473337]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Feb-09 19:37:32.475085]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Feb-09 19:37:32.476809]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Feb-09 19:37:32.478674]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Feb-09 19:37:32.480587]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Feb-09 19:37:32.516570]: Toolhead 0 commands idle
[1970-Feb-09 19:37:37.317288]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Feb-09 19:37:39.594108]: Buffer stall ongoing: 2322
[1970-Feb-09 19:37:39.781226]: Buffer stall ongoing: 41925
[1970-Feb-09 19:37:39.808556]: Last sync period had (0,0,486) buffer fulls due to suspend moves
[1970-Feb-09 19:37:39.816140]: Syncing turned false
[1970-Feb-09 19:37:39.834643]: PRU Event: PRU_SYNC_OFF(0)
[1970-Feb-09 19:37:39.836440]: Buffer stall ongoing: 49278
[1970-Feb-09 19:37:39.881344]: Toolhead 0  ADC Error: 0
[1970-Feb-09 19:37:40.950501]: HES logged: true
[1970-Feb-09 19:37:41.205870]: GetCachedToolUsageStats called
[1970-Feb-09 19:37:43.549077]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:37:44.403586]: GAP: Query->Await
[1970-Feb-09 19:37:44.424090]: TH0: Retreived step position 11665679
[1970-Feb-09 19:37:44.442244]: wait for PRU status in get position
[1970-Feb-09 19:37:44.443951]: wait for PRU status in get position
[1970-Feb-09 19:37:44.445802]: GAP: Await->Done(Query)
[1970-Feb-09 19:37:48.968637]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:37:52.385640]: Changing HES sample rate. Commanded: 215Hz; clamped to 215Hz (215/1)
[1970-Feb-09 19:37:52.827444]: GetCachedToolUsageStats called
[1970-Feb-09 19:37:52.960403]: Expecting 103882 steps extruded this print from 957 mm of plastic
[1970-Feb-09 19:37:53.184437]: Heater manager Set Target Temperature to 215, index 0
[1970-Feb-09 19:37:53.186253]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-09 19:37:53.416468]: wait for heaters at target, wait bitmask 0x1
[1970-Feb-09 19:38:48.779842]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Feb-09 19:38:51.187683]: Expend Buffer: false
[1970-Feb-09 19:38:51.295905]: Syncing turned true
[1970-Feb-09 19:38:51.389880]: PRU Event: PRU_SYNC_ON(12)
[1970-Feb-09 19:38:51.391952]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Feb-09 19:38:51.751893]: Toolhead 0  ADC Error: 1
[1970-Feb-09 19:38:51.869474]: Expected packet id: 0xdb, Got packet id: 0xda, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x1a,0x5f,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x0,0x0,0x0,0x0,0x3,0xaa,0x0,0xda,0x74,0xae,0x48,0xe6,

[1970-Feb-09 19:38:51.871745]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:38:51.977976]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Feb-09 19:38:51.979859]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Feb-09 19:38:51.981798]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Feb-09 19:38:51.983477]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Feb-09 19:38:51.985286]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Feb-09 19:38:51.986991]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Feb-09 19:38:51.988951]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Feb-09 19:38:51.990896]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Feb-09 19:38:51.992720]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Feb-09 19:38:51.994423]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Feb-09 19:38:51.996115]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Feb-09 19:38:52.768469]: Expected packet id: 0x3e, Got packet id: 0x3d, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x1a,0x5f,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x0,0x0,0x0,0x0,0x0,0x60,0x0,0x3d,0xc4,0x4d,0x83,0x45,

[1970-Feb-09 19:38:52.770649]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:38:53.233063]: Expected packet id: 0x89, Got packet id: 0x0, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x1a,0x5f,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,

[1970-Feb-09 19:38:53.235108]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:39:29.191783]: Expected packet id: 0xe0, Got packet id: 0x0, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0xf,0x0,0x2d,0x0,0xda,0x0,0xf,0x40,0xb3,0x1,0x0,0xd7,0x0,0x0,0xac,

[1970-Feb-09 19:39:29.193697]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:41:00.311830]: Expected packet id: 0xfb, Got packet id: 0x1, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0xf,0x0,0x2d,0x0,0xd4,0x0,0xf,0x75,0x48,0x1,0x0,0xd7,0x0,0x0,

[1970-Feb-09 19:41:00.313792]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:41:11.964218]: Expected packet id: 0xe5, Got packet id: 0xe4, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x7b,0xb1,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x3,0x7,0x0,0xe4,0x87,0x46,0x4,0x41,

[1970-Feb-09 19:41:11.966257]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:41:25.129362]: Expected packet id: 0x62, Got packet id: 0x61, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x83,0x9a,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x1,0xb4,0x0,0x61,0x2f,0x6d,0xea,0xee,

[1970-Feb-09 19:41:25.131537]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:41:59.891748]: Expected packet id: 0xf8, Got packet id: 0xf7, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x97,0x24,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x5,0x25,0x0,0xf7,0xd0,0x33,0x5a,0xab,

[1970-Feb-09 19:41:59.893660]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:41:59.898757]: Expected packet id: 0xf8, Got packet id: 0xf7, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x97,0x24,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x5,0x25,0x0,0xf7,0xd0,0x33,0x5a,0xab,

[1970-Feb-09 19:41:59.900865]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 2
[1970-Feb-09 19:42:27.203152]: Expected packet id: 0x2b, Got packet id: 0x2a, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0xa4,0x82,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x0,0x56,0x0,0x2a,0xa6,0x74,0xc9,0x2b,

[1970-Feb-09 19:42:27.206025]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:42:34.903398]: Expected packet id: 0xfa, Got packet id: 0xf9, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd9,0x0,0xf,0xa6,0x8d,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x0,0x11,0x0,0xf9,0x45,0xcf,0xd3,0xf7,

[1970-Feb-09 19:42:34.905340]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:42:44.708342]: Expected packet id: 0x2d, Got packet id: 0x2c, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0xa8,0xec,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x0,0x36,0x0,0x2c,0xb0,0x91,0x1e,0x1e,

[1970-Feb-09 19:42:44.710506]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:43:05.945680]: Toolhead 0 : Retry: Waited 0.614948s from state change
[1970-Feb-09 19:43:46.733495]: Expected packet id: 0x38, Got packet id: 0x37, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd9,0x0,0xf,0xb9,0x77,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x0,0x26,0x0,0x37,0x1b,0xa4,0x76,0x43,

[1970-Feb-09 19:43:46.735612]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:44:39.275235]: Expected packet id: 0x2a, Got packet id: 0x29, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xc6,0xd0,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x0,0x0,0x0,0x0,0x0,0x78,0x0,0x29,0xe3,0xa6,0x77,0x4e,

[1970-Feb-09 19:44:39.277259]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Feb-09 19:44:50.905437]: toolhead pausing
[1970-Feb-09 19:44:50.909725]: Last sync period had (0,10242,37599) buffer fulls due to suspend moves
[1970-Feb-09 19:44:50.912259]: Syncing turned false
[1970-Feb-09 19:44:50.913977]: quack pause: true
[1970-Feb-09 19:44:50.940518]: PRU Event: PRU_SYNC_OFF(0)
[1970-Feb-09 19:44:50.989863]:  axis running: 0
[1970-Feb-09 19:44:51.035104]:  axis running: 0
[1970-Feb-09 19:44:51.069512]:  axis running: 0
[1970-Feb-09 19:44:51.105016]:  axis running: 0
[1970-Feb-09 19:44:51.157322]:  axis running: 0
[1970-Feb-09 19:44:51.195277]:  axis running: 0
[1970-Feb-09 19:44:51.232260]:  axis running: 0
[1970-Feb-09 19:44:51.272281]:  axis running: 0
[1970-Feb-09 19:44:51.312002]:  axis running: 0
[1970-Feb-09 19:44:51.347166]:  axis running: 0
[1970-Feb-09 19:44:51.381786]:  axis running: 0
[1970-Feb-09 19:44:51.491429]: Last sync period had (0,10242,37599) buffer fulls due to suspend moves
[1970-Feb-09 19:44:51.493620]: Libstepper All Axis Abort
[1970-Feb-09 19:44:51.505775]: Clear Toolhead Buffer
[1970-Feb-09 19:44:51.585088]: clear toolhead buffer acknowledged
[1970-Feb-09 19:44:51.928718]: toolhead unpausing
[1970-Feb-09 19:44:51.943635]: quack pause: false
[1970-Feb-09 19:44:52.035209]: Expend Buffer: true
[1970-Feb-09 19:44:52.070838]: Last sync period had (0,10242,37617) buffer fulls due to suspend moves
[1970-Feb-09 19:44:52.072706]: Syncing turned false
[1970-Feb-09 19:44:52.134092]: Toolhead 0  ADC Error: 0
[1970-Feb-09 19:44:52.190444]: GAP: Query->Await
[1970-Feb-09 19:44:52.206740]: TH0: Retreived step position 14090511
[1970-Feb-09 19:44:52.234724]: wait for PRU status in get position
[1970-Feb-09 19:44:52.236481]: wait for PRU status in get position
[1970-Feb-09 19:44:52.238279]: GAP: Await->Done(Query)
[1970-Feb-09 19:44:52.301297]: Suspend
[1970-Feb-09 19:44:52.328656]: Suspend index 3738 found, A-pos 425.008
[1970-Feb-09 19:44:56.876458]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:44:57.911060]: GAP: Query->Await
[1970-Feb-09 19:44:57.955435]: TH0: Retreived step position 14156047
[1970-Feb-09 19:44:57.995036]: wait for PRU status in get position
[1970-Feb-09 19:44:57.996825]: wait for PRU status in get position
[1970-Feb-09 19:44:57.998636]: GAP: Await->Done(Query)
[1970-Feb-09 19:45:52.048987]: GetCachedToolUsageStats called
[1970-Feb-09 19:45:53.604180]: toolhead pausing
[1970-Feb-09 19:45:53.612792]: Last sync period had (0,10242,38577) buffer fulls due to suspend moves
[1970-Feb-09 19:45:53.614728]: Syncing turned false
[1970-Feb-09 19:45:53.616443]: quack pause: true
[1970-Feb-09 19:45:53.794672]: Last sync period had (0,10242,38586) buffer fulls due to suspend moves
[1970-Feb-09 19:45:53.796517]: Libstepper All Axis Abort
[1970-Feb-09 19:45:53.798270]: Clear Toolhead Buffer
[1970-Feb-09 19:45:53.814885]: clear toolhead buffer acknowledged
[1970-Feb-09 19:45:53.910282]: toolhead unpausing
[1970-Feb-09 19:45:53.912049]: quack pause: false
[1970-Feb-09 19:45:54.013031]: Expend Buffer: true
[1970-Feb-09 19:45:54.070740]: Last sync period had (0,10242,38601) buffer fulls due to suspend moves
[1970-Feb-09 19:45:54.072627]: Syncing turned false
[1970-Feb-09 19:45:54.200855]: GAP: Query->Await
[1970-Feb-09 19:45:54.227572]: TH0: Retreived step position 14090511
[1970-Feb-09 19:45:54.315213]: wait for PRU status in get position
[1970-Feb-09 19:45:54.316942]: wait for PRU status in get position
[1970-Feb-09 19:45:54.318751]: GAP: Await->Done(Query)
[1970-Feb-09 19:45:54.478608]: Heater manager Set Target Temperature to 0, index 0
[1970-Feb-09 19:45:54.480662]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-09 19:46:00.694035]: libstepper: true toolhead: false( ignored: false) acceleration_manager: true
[1970-Feb-09 19:46:01.132554]: Heater manager Set Target Temperature to 215, index 0
[1970-Feb-09 19:46:01.134491]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-09 19:46:01.232380]: wait for heaters at target, wait bitmask 0x1
[1970-Feb-09 19:46:01.434195]: GetCachedToolUsageStats called
[1970-Feb-09 19:46:17.092935]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Feb-09 19:46:22.302598]: Last sync period had (0,10242,40242) buffer fulls due to suspend moves
[1970-Feb-09 19:46:22.304593]: Syncing turned false
[1970-Feb-09 19:46:22.306652]: TH0: 111 failures in last 15518 packets (0.715298%)
[1970-Feb-09 19:46:22.309268]: Toolhead Abort
[1970-Feb-09 19:46:22.311247]: aborting pru with shutdown=true
[1970-Feb-09 19:46:22.313825]: Last sync period had (0,10242,40242) buffer fulls due to suspend moves
[1970-Feb-09 19:46:22.315736]: Libstepper All Axis Abort
[1970-Feb-09 19:46:22.318335]: Heater manager Set Target Temperature to 0, index 0
[1970-Feb-09 19:46:22.320309]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-09 19:46:22.397872]: Heater manager Set Target Temperature to 0, index 0
[1970-Feb-09 19:46:22.399895]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Feb-09 19:46:22.468648]: Commanding stats update: Retract count: 596603422
[1970-Feb-09 19:46:22.470647]: Toolhead 0 marked as possibly blocking!
[1970-Feb-09 19:46:23.185396]: Toolhead 0 done blocking!
[1970-Feb-09 19:46:23.514659]: GetToolUsageStats called in machine  state 0
[1970-Feb-09 19:46:23.517320]: Commanding tool usage stat retrieve
[1970-Feb-09 19:46:23.519236]: GetToolUsageState: Proceeds to 1
[1970-Feb-09 19:46:23.521148]: GetToolUsagState: Error from retrieve: 0x10a
[1970-Feb-09 19:46:23.572630]: Raw usage stats: retract 1193206734ct, extrusion 1883018 steps, 6514 seconds, refurbed 0 times
[1970-Feb-09 19:46:23.672666]: GetToolUsageStats called in machine  state 1
[1970-Feb-09 19:46:23.674480]: VerifyToolUsageStatsRetrieved: Done
[1970-Feb-09 19:46:23.676159]: GetToolUsageState: Proceeds to 2
[1970-Feb-09 19:46:23.733344]: GetToolUsageStats called in machine  state 2
[1970-Feb-09 19:46:23.735155]: GetToolUsageState: Done, resets
[1970-Feb-18 19:14:06.138769]: Heater manager Set Target Temperature to 0, index 0
[1970-Feb-18 19:14:06.545043]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Aug-26 21:50:28.562749]: Toolhead 0 state error: 80
[1970-Aug-26 21:50:43.263013]: Toolhead 0 state error: 0
[1970-Sep-16 17:45:06.015222]: Toolhead 0 state error: 80
[1970-Sep-16 17:45:09.747837]: Toolhead 0 state error: 0