[1970-Jan-01 00:01:33.338175]: Loading settings from string...
[1970-Jan-01 00:01:33.631692]: Parsing toolhead settings for bronx...
[1970-Jan-01 00:01:33.673844]: Rebuilding toolhead structure
[1970-Jan-01 00:01:33.713326]: Building bronx location 0...
[1970-Jan-01 00:01:33.894084]: Initialization: heater settings
[1970-Jan-01 00:01:33.895964]: storing heater 0 to time out after 3 minutes at temp, 1 minutes with no rise of 10C, fan feedforward amount 15C
[1970-Jan-01 00:01:33.917473]: Settings: Parsing home subtree...
[1970-Jan-01 00:01:33.954762]: Init endstop for axis: 0, type: load_sense, polarity: false
[1970-Jan-01 00:01:33.971194]: Init endstop for axis: 1, type: load_sense, polarity: false
[1970-Jan-01 00:01:33.973033]: Init endstop for axis: 2, type: toolhead, polarity: false
[1970-Jan-01 00:01:33.998308]: Parsing root settings...
[1970-Jan-01 00:01:34.051060]: STEPPER CONVERSIONS: Axis 0 steps per mm: 88.5732
[1970-Jan-01 00:01:34.085436]: STEPPER CONVERSIONS: Axis 1 steps per mm: 88.5732
[1970-Jan-01 00:01:34.087295]: STEPPER CONVERSIONS: Axis 2 steps per mm: 400
[1970-Jan-01 00:01:34.089116]: STEPPER CONVERSIONS: Axis 3 steps per mm: 108.55
[1970-Jan-01 00:01:34.101457]: STEPPER CONVERSIONS: Axis 0 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 243 29 0
[1970-Jan-01 00:01:34.103745]: STEPPER CONVERSIONS: Axis 1 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 32 29 0
[1970-Jan-01 00:01:34.105948]: STEPPER CONVERSIONS: Axis 2 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 32 32 0
[1970-Jan-01 00:01:34.108135]: STEPPER CONVERSIONS: Axis 3 periods per second 17847.6 seconds per period 5.603e-05 slowest tickrate axis 3 tickrate 5.603e-05 radices 32 32 32 31
[1970-Jan-01 00:01:34.120890]: syncing set to true
[1970-Jan-01 00:01:34.149015]: Axis count unspecified, defaulting to 4
[1970-Jan-01 00:01:34.187920]: Loading capacitor model settings for extruder 0
[1970-Jan-01 00:01:34.201616]: Have 1 valid ToolheadManager pointers, 0 is 0x1de750
[1970-Jan-01 00:01:34.322879]: setting driver address to 22
[1970-Jan-01 00:01:38.640937]: Init step: 0
[1970-Jan-01 00:01:38.700837]: Reset Toolhead Program State
[1970-Jan-01 00:01:38.702509]: Toolhead programmer: Resetting
[1970-Jan-01 00:01:38.704168]: done
[1970-Jan-01 00:01:39.885941]: Init step: 1
[1970-Jan-01 00:01:39.903475]: done
[1970-Jan-01 00:01:40.389823]: Init step: 2
[1970-Jan-01 00:01:40.401984]: done
[1970-Jan-01 00:01:40.891481]: Init step: 3
[1970-Jan-01 00:01:41.060626]: done
[1970-Jan-01 00:01:41.393680]: Init step: 4
[1970-Jan-01 00:01:41.416453]: done
[1970-Jan-01 00:01:41.905847]: Init step: 5
[1970-Jan-01 00:01:41.921138]: done
[1970-Jan-01 00:01:42.408205]: Init step: 5
[1970-Jan-01 00:01:42.510449]: done
[1970-Jan-01 00:01:42.909977]: Init step: 5
[1970-Jan-01 00:01:42.989549]: done
[1970-Jan-01 00:01:43.414262]: Init step: 5
[1970-Jan-01 00:01:43.416142]: done
[1970-Jan-01 00:01:43.916200]: Init step: 5
[1970-Jan-01 00:01:43.930469]: done
[1970-Jan-01 00:01:44.418195]: Init step: 5
[1970-Jan-01 00:01:44.531668]: done
[1970-Jan-01 00:01:44.931839]: Init step: 5
[1970-Jan-01 00:01:44.934922]: Toolhead 0: Packet 0x0: Calculated CRC: 0x62f5481b  Packet CRC: 0x0
[1970-Jan-01 00:01:44.936823]: Toolhead 0 : Toolhead Response Fail with comm_error: 1  Retry # : 1
[1970-Jan-01 00:01:44.938639]: done
[1970-Jan-01 00:01:45.422648]: Init step: 5
[1970-Jan-01 00:01:45.424441]: done
[1970-Jan-01 00:01:45.925669]: Init step: 5
[1970-Jan-01 00:01:45.940468]: done
[1970-Jan-01 00:01:46.427070]: Init step: 5
[1970-Jan-01 00:01:46.529118]: done
[1970-Jan-01 00:01:46.939266]: Init step: 5
[1970-Jan-01 00:01:46.952647]: Got valid API version 6 for Toolhead 0
[1970-Jan-01 00:01:46.970586]: done
[1970-Jan-01 00:01:47.441906]: Init step: 5
[1970-Jan-01 00:01:47.450470]: done
[1970-Jan-01 00:01:47.943845]: Init step: 5
[1970-Jan-01 00:01:48.045895]: done
[1970-Jan-01 00:01:48.446124]: Init step: 5
[1970-Jan-01 00:01:48.460938]: Toolhead 0 state error: 80
[1970-Jan-01 00:01:48.462637]: Toolhead 0: Toolhead has Firmware version 1.7,734
[1970-Jan-01 00:01:48.464961]:  Toolhead 0 initialized
[1970-Jan-01 00:01:48.466671]: done
[1970-Jan-01 00:01:48.948198]: Init step: 6
[1970-Jan-01 00:01:48.949929]: done
[1970-Jan-01 00:01:49.460747]: Init step: 7
[1970-Jan-01 00:01:49.463119]: done
[1970-Jan-01 00:01:49.971867]: PRU Event: PRU_INIT
[1970-Jan-01 00:01:50.965520]: bronx lowest mem space: 0x376 bytes
[1970-Jan-01 00:01:50.967210]: Checking tool eeprom version
[1970-Jan-01 00:01:50.968988]: Commanding tool usage stat retrieve
[1970-Jan-01 00:01:50.977897]: New tool uid 0xac97 attached, updating info cache
[1970-Jan-01 00:01:52.519561]: Loading settings from string...
[1970-Jan-01 00:01:52.651523]: Parsing toolhead settings for bronx...
[1970-Jan-01 00:01:52.653915]: Initialization: heater settings
[1970-Jan-01 00:01:52.655792]: storing heater 0 to time out after 3 minutes at temp, 1 minutes with no rise of 10C, fan feedforward amount 15C
[1970-Jan-01 00:01:52.657881]: Settings: Parsing home subtree...
[1970-Jan-01 00:01:52.671078]: Init endstop for axis: 0, type: load_sense, polarity: false
[1970-Jan-01 00:01:52.672938]: Init endstop for axis: 1, type: load_sense, polarity: false
[1970-Jan-01 00:01:52.675228]: Init endstop for axis: 2, type: toolhead, polarity: false
[1970-Jan-01 00:01:52.676995]: Parsing root settings...
[1970-Jan-01 00:01:52.678883]: STEPPER CONVERSIONS: Axis 0 steps per mm: 88.5732
[1970-Jan-01 00:01:52.687630]: STEPPER CONVERSIONS: Axis 1 steps per mm: 88.5732
[1970-Jan-01 00:01:52.689634]: STEPPER CONVERSIONS: Axis 2 steps per mm: 400
[1970-Jan-01 00:01:52.691681]: STEPPER CONVERSIONS: Axis 3 steps per mm: 108.55
[1970-Jan-01 00:01:52.693515]: STEPPER CONVERSIONS: Axis 0 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 3 tickrate 5.603e-05 radices 32 32 32 31
[1970-Jan-01 00:01:52.695826]: STEPPER CONVERSIONS: Axis 1 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 3 tickrate 5.603e-05 radices 32 32 32 31
[1970-Jan-01 00:01:52.698040]: STEPPER CONVERSIONS: Axis 2 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 3 tickrate 5.603e-05 radices 32 32 32 31
[1970-Jan-01 00:01:52.710524]: STEPPER CONVERSIONS: Axis 3 periods per second 17847.6 seconds per period 5.603e-05 slowest tickrate axis 3 tickrate 5.603e-05 radices 32 32 32 31
[1970-Jan-01 00:01:52.713044]: syncing set to true
[1970-Jan-01 00:01:52.732372]: Axis count unspecified, defaulting to 4
[1970-Jan-01 00:01:52.751829]: Loading capacitor model settings for extruder 0
[1970-Jan-01 00:01:52.755453]: Have 1 valid ToolheadManager pointers, 0 is 0x1de750
[1970-Jan-01 00:01:52.873640]: GetCachedToolUsageStats called
[1970-Jan-01 00:01:54.190948]: Connected tool has eepromv4
[1970-Jan-01 00:01:55.703514]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-01 00:02:10.930931]: bronx lowest mem space: 0x372 bytes
[1970-Jan-01 00:02:12.203270]: GetCachedToolUsageStats called
[1970-Jan-01 01:02:10.382258]: GetCachedToolUsageStats called
[1970-Jan-01 01:25:11.632970]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 01:25:11.634716]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:25:13.009261]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:25:13.955589]: bronx lowest mem space: 0x352 bytes
[1970-Jan-01 01:25:18.854360]: Toolhead 0 state error: 0
[1970-Jan-01 01:25:21.150522]: Toolhead 0 state error: 80
[1970-Jan-01 01:28:04.401871]: GetCachedToolUsageStats called
[1970-Jan-01 01:28:09.997804]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:28:14.408840]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:28:18.316423]: Toolhead 0 state error: 0
[1970-Jan-01 01:28:18.672168]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:28:22.252861]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:28:26.393420]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:28:31.359102]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:28:35.089207]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:28:38.688215]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:28:43.387940]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:28:47.293300]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:28:47.323784]:  wait for axis 0 full: false offset: 126 l3map offset:    126 status: 1 position 0 status count 1001
[1970-Jan-01 01:28:51.073053]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:28:56.044655]: Raw HES proceeding
[1970-Jan-01 01:28:56.099177]: Got raw val 24035, saturated: true
[1970-Jan-01 01:28:56.390910]: Returning HES
[1970-Jan-01 01:28:56.392666]: Sending back val 24035, saturated true
[1970-Jan-01 01:28:56.583213]: GetCachedToolUsageStats called
[1970-Jan-01 01:28:56.613335]: TH0: 2 failures in last 2797 packets (0.0715052%)
[1970-Jan-01 01:28:56.615366]: Toolhead Abort
[1970-Jan-01 01:28:56.617088]: aborting pru with shutdown=true
[1970-Jan-01 01:28:56.620508]: Last sync period had (0,0,46851) buffer fulls due to suspend moves
[1970-Jan-01 01:28:56.622381]: Libstepper All Axis Abort
[1970-Jan-01 01:28:59.484183]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 01:28:59.486073]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:29:00.839866]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:29:01.002350]: GetCachedToolUsageStats called
[1970-Jan-01 01:29:03.725146]: Toolhead 0 state error: 80
[1970-Jan-01 01:29:13.558209]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:29:15.810299]: Toolhead 0 state error: 0
[1970-Jan-01 01:29:16.891034]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:29:18.929598]: Raw HES proceeding
[1970-Jan-01 01:29:18.949380]: Toolhead 0 state error: 80
[1970-Jan-01 01:29:18.951390]: Got raw val 24023, saturated: true
[1970-Jan-01 01:29:18.967160]: Returning HES
[1970-Jan-01 01:29:18.968840]: Sending back val 24023, saturated true
[1970-Jan-01 01:29:19.116852]: GetCachedToolUsageStats called
[1970-Jan-01 01:29:19.142416]: Toolhead Abort
[1970-Jan-01 01:29:19.144258]: aborting pru with shutdown=true
[1970-Jan-01 01:29:19.148132]: CLEAR BUFFER FAIL! in libstepper::Abort()
[1970-Jan-01 01:29:19.150672]: Last sync period had (0,0,48465) buffer fulls due to suspend moves
[1970-Jan-01 01:29:19.152570]: Libstepper All Axis Abort
[1970-Jan-01 01:29:24.519086]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 01:29:24.531246]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:29:25.926472]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:29:26.102809]: GetCachedToolUsageStats called
[1970-Jan-01 01:29:30.111580]: Toolhead 0 state error: 0
[1970-Jan-01 01:29:31.785990]: Toolhead 0 state error: 80
[1970-Jan-01 01:29:32.087024]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:29:36.003023]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:29:40.201943]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:29:43.685838]: Toolhead 0 state error: 0
[1970-Jan-01 01:29:45.659881]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:29:49.479910]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:29:49.899414]: Toolhead 0 state error: 80
[1970-Jan-01 01:29:51.163879]: Toolhead 0 state error: 0
[1970-Jan-01 01:29:53.782717]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:29:57.968772]: Toolhead 0 state error: 80
[1970-Jan-01 01:29:58.166742]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:30:01.958736]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:30:06.266951]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:30:10.096558]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:30:10.698369]:  wait for axis 0 full: false offset: 90 l3map offset:    90 status: 1 position 0 status count 1001
[1970-Jan-01 01:30:14.901499]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:30:19.456900]: Raw HES proceeding
[1970-Jan-01 01:30:19.518297]: HES not updated!
[1970-Jan-01 01:30:19.595503]: HES not updated!
[1970-Jan-01 01:30:19.657085]: HES not updated!
[1970-Jan-01 01:30:19.700911]: Got raw val 24026, saturated: true
[1970-Jan-01 01:30:19.726693]: Returning HES
[1970-Jan-01 01:30:19.728593]: Sending back val 24026, saturated true
[1970-Jan-01 01:30:19.903634]: GetCachedToolUsageStats called
[1970-Jan-01 01:30:19.929919]: Toolhead Abort
[1970-Jan-01 01:30:19.932019]: aborting pru with shutdown=true
[1970-Jan-01 01:30:19.934677]: Last sync period had (0,0,52320) buffer fulls due to suspend moves
[1970-Jan-01 01:30:19.936574]: Libstepper All Axis Abort
[1970-Jan-01 01:30:23.752766]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 01:30:23.754520]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:30:25.352979]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:30:25.718491]: GetCachedToolUsageStats called
[1970-Jan-01 01:30:27.570881]: Steps overrun! last 55360 and just got 679
[1970-Jan-01 01:30:27.572688]: calculated 10854
[1970-Jan-01 01:30:28.605713]: Toolhead 0 state error: 0
[1970-Jan-01 01:30:28.906644]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:30:32.803412]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:30:36.192502]: Raw HES proceeding
[1970-Jan-01 01:30:36.236175]: Got raw val 24043, saturated: true
[1970-Jan-01 01:30:36.387016]: Returning HES
[1970-Jan-01 01:30:36.388857]: Sending back val 24043, saturated true
[1970-Jan-01 01:30:36.571137]: GetCachedToolUsageStats called
[1970-Jan-01 01:30:36.630426]: Toolhead Abort
[1970-Jan-01 01:30:36.632236]: aborting pru with shutdown=true
[1970-Jan-01 01:30:36.635155]: Last sync period had (0,0,52953) buffer fulls due to suspend moves
[1970-Jan-01 01:30:36.636964]: Libstepper All Axis Abort
[1970-Jan-01 01:30:41.249268]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 01:30:41.261453]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:30:42.462396]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:30:42.910325]: GetCachedToolUsageStats called
[1970-Jan-01 01:30:46.829907]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:30:52.962689]: Raw HES proceeding
[1970-Jan-01 01:30:53.025363]: Got raw val 24036, saturated: true
[1970-Jan-01 01:30:53.140441]: Returning HES
[1970-Jan-01 01:30:53.142261]: Sending back val 24036, saturated true
[1970-Jan-01 01:30:53.325583]: GetCachedToolUsageStats called
[1970-Jan-01 01:30:53.351349]: Toolhead Abort
[1970-Jan-01 01:30:53.353142]: aborting pru with shutdown=true
[1970-Jan-01 01:30:53.355825]: Last sync period had (0,0,53565) buffer fulls due to suspend moves
[1970-Jan-01 01:30:53.357732]: Libstepper All Axis Abort
[1970-Jan-01 01:31:06.237295]: Toolhead 0 state error: 54
[1970-Jan-01 01:31:06.239055]: Tool UID becomes 0.
[1970-Jan-01 01:31:36.426200]: Checking tool eeprom version
[1970-Jan-01 01:31:36.427882]: Commanding tool usage stat retrieve
[1970-Jan-01 01:31:36.429527]: New tool uid 0xac97 attached, updating info cache
[1970-Jan-01 01:31:36.491924]: GetCachedToolUsageStats called
[1970-Jan-01 01:31:37.933017]: Toolhead 0 state error: 0
[1970-Jan-01 01:31:37.934889]: Connected tool has eepromv4
[1970-Jan-01 01:31:37.939137]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-01 01:31:43.643748]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 01:31:43.645517]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:31:44.996094]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:32:24.898094]: GetCachedToolUsageStats called
[1970-Jan-01 01:32:26.167918]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:32:30.924383]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:32:34.841822]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:32:38.562214]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:32:42.881070]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:32:43.377219]: Steps overrun! last 54954 and just got 273
[1970-Jan-01 01:32:43.378918]: calculated 10854
[1970-Jan-01 01:32:47.938463]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:32:51.679914]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:32:54.944047]:  wait for axis 0 full: false offset: 72 l3map offset:    90 status: 1 position 0 status count 1001
[1970-Jan-01 01:32:55.944521]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:33:00.207280]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:33:03.867498]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:33:08.012786]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:33:11.761886]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:33:18.027507]: Raw HES proceeding
[1970-Jan-01 01:33:18.065159]: Got raw val 24038, saturated: true
[1970-Jan-01 01:33:18.100910]: Returning HES
[1970-Jan-01 01:33:18.102597]: Sending back val 24038, saturated true
[1970-Jan-01 01:33:18.303879]: GetCachedToolUsageStats called
[1970-Jan-01 01:33:18.353716]: Toolhead Abort
[1970-Jan-01 01:33:18.355664]: aborting pru with shutdown=true
[1970-Jan-01 01:33:18.366123]: Last sync period had (0,0,61119) buffer fulls due to suspend moves
[1970-Jan-01 01:33:18.368018]: Libstepper All Axis Abort
[1970-Jan-01 01:35:02.058100]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 01:35:02.106298]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:35:03.581201]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:35:03.883444]: GetCachedToolUsageStats called
[1970-Jan-01 01:35:05.650635]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:35:09.299742]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:35:14.066480]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:35:17.976859]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:35:21.661400]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:35:25.843895]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:35:29.979586]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:35:32.920636]: Toolhead 0 state error: 54
[1970-Jan-01 01:35:32.922408]: Tool UID becomes 0.
[1970-Jan-01 01:35:35.098256]: Toolhead Abort
[1970-Jan-01 01:35:35.104374]: aborting pru with shutdown=true
[1970-Jan-01 01:35:35.110959]: Last sync period had (0,0,63996) buffer fulls due to suspend moves
[1970-Jan-01 01:35:35.112791]: Libstepper All Axis Abort
[1970-Jan-01 01:36:35.497091]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 01:36:35.498921]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:36:39.443700]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:36:40.556351]: Toolhead 0 state error: 0
[1970-Jan-01 01:36:40.558197]: Checking tool eeprom version
[1970-Jan-01 01:36:40.559848]: Commanding tool usage stat retrieve
[1970-Jan-01 01:36:40.561716]: New tool uid 0xac97 attached, updating info cache
[1970-Jan-01 01:36:40.565857]: Connected tool has eepromv4
[1970-Jan-01 01:36:40.570208]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-01 01:36:40.655498]: GetCachedToolUsageStats called
[1970-Jan-01 01:36:40.691494]: Last sync period had (0,0,64557) buffer fulls due to suspend moves
[1970-Jan-01 01:36:40.693441]: Syncing turned false
[1970-Jan-01 01:36:40.695177]: Toolhead Abort
[1970-Jan-01 01:36:40.696904]: aborting pru with shutdown=true
[1970-Jan-01 01:36:40.701085]: Last sync period had (0,0,64557) buffer fulls due to suspend moves
[1970-Jan-01 01:36:40.703996]: Libstepper All Axis Abort
[1970-Jan-01 01:36:40.705660]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 01:36:40.707366]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:36:40.709221]: Commanding tool usage stat retrieve
[1970-Jan-01 01:36:40.729086]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-01 01:36:40.746112]: Commanding tool usage stat retrieve
[1970-Jan-01 01:36:40.781330]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-01 01:36:46.681097]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 01:36:46.682999]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:36:48.003618]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:37:51.108058]: GetCachedToolUsageStats called
[1970-Jan-01 01:37:54.131569]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:37:58.212483]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:38:02.650642]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:38:06.902349]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:38:09.153032]: Steps overrun! last 56719 and just got 2038
[1970-Jan-01 01:38:09.154778]: calculated 10854
[1970-Jan-01 01:38:10.573000]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:38:15.122857]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:38:19.480336]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:38:23.236468]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:38:27.086820]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:38:31.876910]:  wait for axis 0 full: false offset: 90 l3map offset:    90 status: 1 position 0 status count 1001
[1970-Jan-01 01:38:32.797910]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:38:36.937508]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:38:40.845442]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:38:44.658223]: Raw HES proceeding
[1970-Jan-01 01:38:44.696713]: Got raw val 24034, saturated: true
[1970-Jan-01 01:38:44.714463]: Returning HES
[1970-Jan-01 01:38:44.716168]: Sending back val 24034, saturated true
[1970-Jan-01 01:38:44.964321]: GetCachedToolUsageStats called
[1970-Jan-01 01:38:44.989197]: Toolhead Abort
[1970-Jan-01 01:38:44.995213]: aborting pru with shutdown=true
[1970-Jan-01 01:38:44.999418]: Last sync period had (0,0,73437) buffer fulls due to suspend moves
[1970-Jan-01 01:38:45.002099]: Libstepper All Axis Abort
[1970-Jan-01 01:38:48.740269]: Toolhead 0 state error: 54
[1970-Jan-01 01:38:48.742067]: Tool UID becomes 0.
[1970-Jan-01 01:38:52.761962]: Toolhead 0 state error: 0
[1970-Jan-01 01:38:52.763737]: Checking tool eeprom version
[1970-Jan-01 01:38:52.765523]: Commanding tool usage stat retrieve
[1970-Jan-01 01:38:52.767508]: New tool uid 0xac97 attached, updating info cache
[1970-Jan-01 01:38:52.773068]: Toolhead 0 state error: 54
[1970-Jan-01 01:38:52.775312]: Connected tool has eepromv1
[1970-Jan-01 01:38:52.842393]: GetCachedToolUsageStats called
[1970-Jan-01 01:38:54.273749]: Raw usage stats: retract 256ct, extrusion 0 steps, 133562624 seconds, refurbed 0 times
[1970-Jan-01 01:38:56.286634]: Tool UID becomes 0.
[1970-Jan-01 01:39:16.594238]: Checking tool eeprom version
[1970-Jan-01 01:39:16.595897]: Commanding tool usage stat retrieve
[1970-Jan-01 01:39:16.597547]: New tool uid 0xac97 attached, updating info cache
[1970-Jan-01 01:39:16.752811]: GetCachedToolUsageStats called
[1970-Jan-01 01:39:18.095481]: Toolhead 0 state error: 0
[1970-Jan-01 01:39:18.097183]: Connected tool has eepromv4
[1970-Jan-01 01:39:18.101444]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-01 01:39:27.028020]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 01:39:27.041910]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:39:28.375835]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:40:17.431246]: GetCachedToolUsageStats called
[1970-Jan-01 01:40:21.376137]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:40:25.775763]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:40:29.568653]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:40:33.013415]: Raw HES proceeding
[1970-Jan-01 01:40:33.073039]: Got raw val 24022, saturated: true
[1970-Jan-01 01:40:33.195185]: Returning HES
[1970-Jan-01 01:40:33.196866]: Sending back val 24022, saturated true
[1970-Jan-01 01:40:33.396508]: GetCachedToolUsageStats called
[1970-Jan-01 01:40:33.448338]: Toolhead Abort
[1970-Jan-01 01:40:33.460814]: aborting pru with shutdown=true
[1970-Jan-01 01:40:33.463702]: Last sync period had (0,0,78555) buffer fulls due to suspend moves
[1970-Jan-01 01:40:33.465480]: Libstepper All Axis Abort
[1970-Jan-01 01:40:37.143841]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 01:40:37.145881]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:40:40.105621]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 01:40:40.107416]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:40:41.343558]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:40:41.568610]: GetCachedToolUsageStats called
[1970-Jan-01 01:40:44.011750]: Toolhead 0 state error: 80
[1970-Jan-01 01:40:51.758747]: Toolhead 0 state error: 0
[1970-Jan-01 01:40:54.991547]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:40:55.247242]: Toolhead 0 state error: 80
[1970-Jan-01 01:40:59.561037]: Raw HES proceeding
[1970-Jan-01 01:40:59.597377]: HES not updated!
[1970-Jan-01 01:40:59.641995]: Toolhead 0 state error: 54
[1970-Jan-01 01:40:59.643767]: Tool UID becomes 0.
[1970-Jan-01 01:40:59.879266]: Can't return raw HES, no tool
[1970-Jan-01 01:40:59.881288]: Sending back val -1, saturated false
[1970-Jan-01 01:40:59.998181]: Toolhead Abort
[1970-Jan-01 01:41:00.011003]: aborting pru with shutdown=true
[1970-Jan-01 01:41:00.021052]: Last sync period had (0,0,80181) buffer fulls due to suspend moves
[1970-Jan-01 01:41:00.023242]: Libstepper All Axis Abort
[1970-Jan-01 01:41:00.650925]: Requested HES value with no tool connected, failing
[1970-Jan-01 01:42:02.797903]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 01:42:02.799739]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:42:04.802705]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:42:05.931866]: Toolhead 0 state error: 0
[1970-Jan-01 01:42:05.933604]: Checking tool eeprom version
[1970-Jan-01 01:42:05.935379]: Commanding tool usage stat retrieve
[1970-Jan-01 01:42:05.937021]: New tool uid 0xac97 attached, updating info cache
[1970-Jan-01 01:42:05.951748]: Connected tool has eepromv4
[1970-Jan-01 01:42:05.955961]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-01 01:42:06.031540]: GetCachedToolUsageStats called
[1970-Jan-01 01:42:06.079914]: Last sync period had (0,0,80727) buffer fulls due to suspend moves
[1970-Jan-01 01:42:06.086852]: Syncing turned false
[1970-Jan-01 01:42:06.088591]: Toolhead Abort
[1970-Jan-01 01:42:06.090494]: aborting pru with shutdown=true
[1970-Jan-01 01:42:06.093481]: CLEAR BUFFER FAIL! in libstepper::Abort()
[1970-Jan-01 01:42:06.096146]: Last sync period had (0,0,80727) buffer fulls due to suspend moves
[1970-Jan-01 01:42:06.099559]: Libstepper All Axis Abort
[1970-Jan-01 01:42:06.101635]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 01:42:06.103342]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:42:06.106277]: Commanding tool usage stat retrieve
[1970-Jan-01 01:42:06.133587]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-01 01:42:06.153403]: Commanding tool usage stat retrieve
[1970-Jan-01 01:42:06.165798]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-01 01:42:12.365141]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 01:42:12.367007]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:42:13.614556]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:43:09.685136]: GetCachedToolUsageStats called
[1970-Jan-01 01:43:21.735582]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:43:24.755545]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:43:27.624329]: Raw HES proceeding
[1970-Jan-01 01:43:27.658106]: Got raw val 24039, saturated: true
[1970-Jan-01 01:43:27.673515]: Returning HES
[1970-Jan-01 01:43:27.675238]: Sending back val 24039, saturated true
[1970-Jan-01 01:43:27.822130]: GetCachedToolUsageStats called
[1970-Jan-01 01:43:27.847350]: Toolhead Abort
[1970-Jan-01 01:43:27.849180]: aborting pru with shutdown=true
[1970-Jan-01 01:43:27.853074]: Last sync period had (0,0,86763) buffer fulls due to suspend moves
[1970-Jan-01 01:43:27.854974]: Libstepper All Axis Abort
[1970-Jan-01 01:43:33.411271]: Toolhead 0 state error: 80
[1970-Jan-01 01:43:34.302553]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 01:43:34.304378]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:43:35.569372]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:43:35.847199]: GetCachedToolUsageStats called
[1970-Jan-01 01:43:39.180343]: Toolhead 0 state error: 0
[1970-Jan-01 01:43:39.787367]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:43:44.384664]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:43:48.869658]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:43:52.722709]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:43:56.128913]: Toolhead 0 state error: 80
[1970-Jan-01 01:43:57.216969]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:43:58.151801]: Toolhead 0 state error: 0
[1970-Jan-01 01:44:01.915610]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:44:06.655473]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:44:10.906569]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:44:14.810229]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:44:20.104645]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:44:21.673778]:  wait for axis 0 full: false offset: 90 l3map offset:    90 status: 1 position 0 status count 1001
[1970-Jan-01 01:44:24.011598]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:44:28.755546]: Raw HES proceeding
[1970-Jan-01 01:44:28.797375]: Got raw val 24021, saturated: true
[1970-Jan-01 01:44:28.813896]: Returning HES
[1970-Jan-01 01:44:28.815626]: Sending back val 24021, saturated true
[1970-Jan-01 01:44:29.016758]: GetCachedToolUsageStats called
[1970-Jan-01 01:44:29.133132]: Toolhead Abort
[1970-Jan-01 01:44:29.134904]: aborting pru with shutdown=true
[1970-Jan-01 01:44:29.168566]: Last sync period had (0,0,90537) buffer fulls due to suspend moves
[1970-Jan-01 01:44:29.170592]: Libstepper All Axis Abort
[1970-Jan-01 01:44:36.761336]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 01:44:36.763282]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:44:38.161890]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:44:38.337038]: GetCachedToolUsageStats called
[1970-Jan-01 01:44:41.250545]: Toolhead 0 state error: 80
[1970-Jan-01 01:44:50.439709]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:44:51.241353]: Toolhead 0 state error: 0
[1970-Jan-01 01:44:53.835970]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:44:56.428553]: Raw HES proceeding
[1970-Jan-01 01:44:56.449725]: Got raw val 24034, saturated: true
[1970-Jan-01 01:44:56.465386]: Returning HES
[1970-Jan-01 01:44:56.467215]: Sending back val 24034, saturated true
[1970-Jan-01 01:44:56.622270]: GetCachedToolUsageStats called
[1970-Jan-01 01:44:56.648623]: Toolhead Abort
[1970-Jan-01 01:44:56.650576]: aborting pru with shutdown=true
[1970-Jan-01 01:44:56.653301]: Last sync period had (0,0,92058) buffer fulls due to suspend moves
[1970-Jan-01 01:44:56.655125]: Libstepper All Axis Abort
[1970-Jan-01 01:44:59.299007]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 01:44:59.311255]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:45:00.526017]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:45:00.587423]: Toolhead 0 state error: 80
[1970-Jan-01 01:45:00.818882]: GetCachedToolUsageStats called
[1970-Jan-01 01:45:05.883994]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:45:06.758576]: Toolhead 0 state error: 0
[1970-Jan-01 01:45:08.726313]: Toolhead 0 state error: 80
[1970-Jan-01 01:45:09.877853]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:45:14.379592]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:45:14.495953]: Toolhead 0 state error: 0
[1970-Jan-01 01:45:18.921020]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:45:22.830718]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:45:27.527279]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:45:31.664091]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:45:36.166951]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:45:40.932146]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:45:42.013185]: Toolhead 0 state error: 80
[1970-Jan-01 01:45:44.963943]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:45:46.118660]:  wait for axis 0 full: false offset: 90 l3map offset:    90 status: 1 position 0 status count 1001
[1970-Jan-01 01:45:49.997209]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:45:50.408184]: Toolhead 0 state error: 0
[1970-Jan-01 01:45:53.925863]: Raw HES proceeding
[1970-Jan-01 01:45:53.966838]: Got raw val 24033, saturated: true
[1970-Jan-01 01:45:54.001742]: Returning HES
[1970-Jan-01 01:45:54.003438]: Sending back val 24033, saturated true
[1970-Jan-01 01:45:54.187482]: GetCachedToolUsageStats called
[1970-Jan-01 01:45:54.212282]: Toolhead Abort
[1970-Jan-01 01:45:54.214054]: aborting pru with shutdown=true
[1970-Jan-01 01:45:54.217996]: CLEAR BUFFER FAIL! in libstepper::Abort()
[1970-Jan-01 01:45:54.220578]: Last sync period had (0,0,95790) buffer fulls due to suspend moves
[1970-Jan-01 01:45:54.222482]: Libstepper All Axis Abort
[1970-Jan-01 01:45:56.321319]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 01:45:56.328743]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:45:57.573391]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:45:57.859559]: GetCachedToolUsageStats called
[1970-Jan-01 01:45:58.632954]: Toolhead 0 state error: 80
[1970-Jan-01 01:45:59.681777]: Steps overrun! last 61739 and just got 7058
[1970-Jan-01 01:45:59.683527]: calculated 10854
[1970-Jan-01 01:46:01.576456]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:46:06.067661]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:46:06.379913]: Toolhead 0 state error: 0
[1970-Jan-01 01:46:09.963984]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:46:14.301857]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:46:18.546218]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:46:23.037180]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:46:27.015029]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:46:30.855163]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:46:35.976605]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:46:40.022027]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:46:42.458051]:  wait for axis 0 full: false offset: 90 l3map offset:    90 status: 1 position 0 status count 1001
[1970-Jan-01 01:46:44.184799]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:46:50.738433]: Raw HES proceeding
[1970-Jan-01 01:46:50.775510]: Got raw val 24038, saturated: true
[1970-Jan-01 01:46:50.811577]: Returning HES
[1970-Jan-01 01:46:50.813293]: Sending back val 24038, saturated true
[1970-Jan-01 01:46:51.006709]: GetCachedToolUsageStats called
[1970-Jan-01 01:46:51.063374]: Toolhead Abort
[1970-Jan-01 01:46:51.065151]: aborting pru with shutdown=true
[1970-Jan-01 01:46:51.070836]: Last sync period had (0,0,99549) buffer fulls due to suspend moves
[1970-Jan-01 01:46:51.072648]: Libstepper All Axis Abort
[1970-Jan-01 01:46:56.793943]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 01:46:56.795738]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:46:58.173116]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:46:58.333923]: GetCachedToolUsageStats called
[1970-Jan-01 01:46:59.729050]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:47:01.382454]: Toolhead 0 state error: 80
[1970-Jan-01 01:47:01.640927]: Toolhead 0 state error: 0
[1970-Jan-01 01:47:03.822157]: Toolhead 0 state error: 80
[1970-Jan-01 01:47:05.875508]: GetCachedToolUsageStats called
[1970-Jan-01 01:47:05.903345]: Toolhead Abort
[1970-Jan-01 01:47:05.905351]: aborting pru with shutdown=true
[1970-Jan-01 01:47:05.908033]: Last sync period had (0,0,99957) buffer fulls due to suspend moves
[1970-Jan-01 01:47:05.909956]: Libstepper All Axis Abort
[1970-Jan-01 01:47:06.332399]: GetCachedToolUsageStats called
[1970-Jan-01 01:47:08.041959]: Toolhead 0 state error: 0
[1970-Jan-01 01:47:11.019524]: Toolhead 0 state error: 80
[1970-Jan-01 01:47:12.438380]: Toolhead 0 state error: 0
[1970-Jan-01 01:47:14.155440]: Toolhead 0 state error: 80
[1970-Jan-01 01:47:18.057300]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:47:20.413544]: Toolhead 0 state error: 0
[1970-Jan-01 01:47:21.562137]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:47:22.733822]: Toolhead 0 state error: 80
[1970-Jan-01 01:47:24.668885]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:47:27.785473]: Raw HES proceeding
[1970-Jan-01 01:47:27.863712]: HES not updated!
[1970-Jan-01 01:47:27.919361]: HES not updated!
[1970-Jan-01 01:47:27.950943]: Got raw val 24023, saturated: true
[1970-Jan-01 01:47:27.980301]: Returning HES
[1970-Jan-01 01:47:27.982004]: Sending back val 24023, saturated true
[1970-Jan-01 01:47:28.159569]: GetCachedToolUsageStats called
[1970-Jan-01 01:47:28.217770]: Toolhead Abort
[1970-Jan-01 01:47:28.219534]: aborting pru with shutdown=true
[1970-Jan-01 01:47:28.231284]: Last sync period had (0,0,101790) buffer fulls due to suspend moves
[1970-Jan-01 01:47:28.233082]: Libstepper All Axis Abort
[1970-Jan-01 01:47:29.799520]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 01:47:29.815829]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:47:31.295877]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:47:31.553671]: GetCachedToolUsageStats called
[1970-Jan-01 01:47:35.514288]: Toolhead 0 state error: 0
[1970-Jan-01 01:47:36.344625]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:47:37.050702]: Toolhead 0 state error: 80
[1970-Jan-01 01:47:40.409389]: Toolhead 0 state error: 0
[1970-Jan-01 01:47:40.536192]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:47:45.123512]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:47:50.526737]: Steps overrun! last 50478 and just got 4481
[1970-Jan-01 01:47:50.528516]: calculated 19538
[1970-Jan-01 01:47:50.627108]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:47:54.955853]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:48:00.619747]: Raw HES proceeding
[1970-Jan-01 01:48:00.661764]: Got raw val 24019, saturated: true
[1970-Jan-01 01:48:00.822416]: Returning HES
[1970-Jan-01 01:48:00.824111]: Sending back val 24019, saturated true
[1970-Jan-01 01:48:01.020928]: GetCachedToolUsageStats called
[1970-Jan-01 01:48:01.077871]: Toolhead Abort
[1970-Jan-01 01:48:01.079650]: aborting pru with shutdown=true
[1970-Jan-01 01:48:01.101238]: Last sync period had (0,0,103674) buffer fulls due to suspend moves
[1970-Jan-01 01:48:01.103169]: Libstepper All Axis Abort
[1970-Jan-01 01:48:15.067522]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 01:48:15.069322]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:48:16.431564]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:48:18.399982]: Toolhead 0 state error: 80
[1970-Jan-01 01:48:18.519331]: GetCachedToolUsageStats called
[1970-Jan-01 01:48:20.578257]: Toolhead 0 state error: 0
[1970-Jan-01 01:48:20.703145]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:48:24.573977]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:48:29.048018]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:48:34.121457]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:48:38.063760]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:48:39.703278]:  wait for axis 0 full: false offset: 72 l3map offset:    90 status: 1 position 0 status count 1001
[1970-Jan-01 01:48:42.015990]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:48:48.353632]: Raw HES proceeding
[1970-Jan-01 01:48:48.415480]: Got raw val 24030, saturated: true
[1970-Jan-01 01:48:48.752440]: Returning HES
[1970-Jan-01 01:48:48.754151]: Sending back val 24030, saturated true
[1970-Jan-01 01:48:48.888503]: GetCachedToolUsageStats called
[1970-Jan-01 01:48:48.918995]: Toolhead Abort
[1970-Jan-01 01:48:48.921018]: aborting pru with shutdown=true
[1970-Jan-01 01:48:48.923919]: CLEAR BUFFER FAIL! in libstepper::Abort()
[1970-Jan-01 01:48:48.926615]: Last sync period had (0,0,105885) buffer fulls due to suspend moves
[1970-Jan-01 01:48:48.928434]: Libstepper All Axis Abort
[1970-Jan-01 01:48:53.454909]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 01:48:53.456860]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:48:55.138627]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:48:55.405738]: GetCachedToolUsageStats called
[1970-Jan-01 01:48:56.733565]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:49:00.839100]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:49:05.792228]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:49:07.833435]: Toolhead 0 state error: 80
[1970-Jan-01 01:49:09.970500]: GetCachedToolUsageStats called
[1970-Jan-01 01:49:09.999075]: Toolhead Abort
[1970-Jan-01 01:49:10.001139]: aborting pru with shutdown=true
[1970-Jan-01 01:49:10.003954]: Last sync period had (0,0,106821) buffer fulls due to suspend moves
[1970-Jan-01 01:49:10.005795]: Libstepper All Axis Abort
[1970-Jan-01 01:49:10.543779]: GetCachedToolUsageStats called
[1970-Jan-01 01:49:21.532418]: Toolhead 0 state error: 54
[1970-Jan-01 01:49:21.534336]: Tool UID becomes 0.
[1970-Jan-01 01:49:23.613779]: Toolhead Abort
[1970-Jan-01 01:49:23.616535]: aborting pru with shutdown=true
[1970-Jan-01 01:49:23.633022]: Last sync period had (0,0,107844) buffer fulls due to suspend moves
[1970-Jan-01 01:49:23.634875]: Libstepper All Axis Abort
[1970-Jan-01 01:50:58.287599]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 01:50:58.289389]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:51:02.588000]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:51:03.107578]: Checking tool eeprom version
[1970-Jan-01 01:51:03.109241]: Commanding tool usage stat retrieve
[1970-Jan-01 01:51:03.111209]: New tool uid 0xac97 attached, updating info cache
[1970-Jan-01 01:51:03.191774]: GetCachedToolUsageStats called
[1970-Jan-01 01:51:03.227986]: Last sync period had (0,0,108576) buffer fulls due to suspend moves
[1970-Jan-01 01:51:03.229811]: Syncing turned false
[1970-Jan-01 01:51:03.232998]: Toolhead Abort
[1970-Jan-01 01:51:03.234747]: aborting pru with shutdown=true
[1970-Jan-01 01:51:03.238338]: Last sync period had (0,0,108576) buffer fulls due to suspend moves
[1970-Jan-01 01:51:03.240312]: Libstepper All Axis Abort
[1970-Jan-01 01:51:03.241966]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 01:51:03.243691]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:51:03.245688]: Commanding tool usage stat retrieve
[1970-Jan-01 01:51:03.351120]: Commanding tool usage stat retrieve
[1970-Jan-01 01:51:03.422002]: Toolhead 0 state error: 0
[1970-Jan-01 01:51:03.432353]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-01 01:51:03.438099]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-01 01:51:03.459383]: Commanding tool usage stat retrieve
[1970-Jan-01 01:51:03.471838]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-01 01:51:13.490934]: Toolhead 0 state error: 80
[1970-Jan-01 01:51:24.971561]: Toolhead 0 state error: 0
[1970-Jan-01 01:51:25.089179]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 01:51:25.101452]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:51:26.350705]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:51:35.549100]: Toolhead 0 state error: 80
[1970-Jan-01 01:51:36.468651]: Toolhead 0 state error: 0
[1970-Jan-01 01:51:41.327652]: Toolhead 0 state error: 80
[1970-Jan-01 01:51:41.610719]: Toolhead 0 state error: 0
[1970-Jan-01 01:51:45.136187]: Toolhead 0 state error: 80
[1970-Jan-01 01:51:48.055858]: Toolhead 0 state error: 0
[1970-Jan-01 01:51:51.191989]: Toolhead 0 state error: 80
[1970-Jan-01 01:51:56.910918]: Toolhead 0 state error: 0
[1970-Jan-01 01:52:19.800299]: Toolhead 0 state error: 80
[1970-Jan-01 01:52:25.080656]: Toolhead 0 state error: 0
[1970-Jan-01 01:52:45.098089]: GetCachedToolUsageStats called
[1970-Jan-01 01:52:46.344621]: Steps overrun! last 58756 and just got 12759
[1970-Jan-01 01:52:46.347187]: calculated 19538
[1970-Jan-01 01:52:46.432683]: Toolhead 0 state error: 80
[1970-Jan-01 01:52:48.635256]: GetCachedToolUsageStats called
[1970-Jan-01 01:52:48.662811]: Toolhead Abort
[1970-Jan-01 01:52:48.664681]: aborting pru with shutdown=true
[1970-Jan-01 01:52:48.667796]: Last sync period had (0,0,114855) buffer fulls due to suspend moves
[1970-Jan-01 01:52:48.669638]: Libstepper All Axis Abort
[1970-Jan-01 01:52:49.054201]: GetCachedToolUsageStats called
[1970-Jan-01 01:52:50.760916]: Toolhead 0 state error: 0
[1970-Jan-01 01:53:02.362663]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:53:06.340899]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:53:10.573678]: Raw HES proceeding
[1970-Jan-01 01:53:10.635328]: Got raw val 24038, saturated: true
[1970-Jan-01 01:53:10.666844]: Returning HES
[1970-Jan-01 01:53:10.668563]: Sending back val 24038, saturated true
[1970-Jan-01 01:53:10.861504]: GetCachedToolUsageStats called
[1970-Jan-01 01:53:10.909510]: Toolhead Abort
[1970-Jan-01 01:53:10.919425]: aborting pru with shutdown=true
[1970-Jan-01 01:53:10.922506]: Last sync period had (0,0,116646) buffer fulls due to suspend moves
[1970-Jan-01 01:53:10.924310]: Libstepper All Axis Abort
[1970-Jan-01 01:53:12.347331]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 01:53:12.349288]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:53:13.589826]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:53:13.953029]: GetCachedToolUsageStats called
[1970-Jan-01 01:53:16.756918]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:53:21.173005]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:53:25.643832]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:53:30.408540]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:53:34.867484]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:53:39.381085]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:53:44.045889]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:53:48.017102]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:53:52.620488]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:53:56.972339]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:54:00.168161]:  wait for axis 0 full: false offset: 90 l3map offset:    90 status: 1 position 0 status count 1001
[1970-Jan-01 01:54:00.916948]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:54:07.495679]: Raw HES proceeding
[1970-Jan-01 01:54:07.615275]: Got raw val 24030, saturated: true
[1970-Jan-01 01:54:07.648447]: Returning HES
[1970-Jan-01 01:54:07.650334]: Sending back val 24030, saturated true
[1970-Jan-01 01:54:07.797056]: GetCachedToolUsageStats called
[1970-Jan-01 01:54:07.825707]: Toolhead Abort
[1970-Jan-01 01:54:07.827462]: aborting pru with shutdown=true
[1970-Jan-01 01:54:07.830168]: Last sync period had (0,0,120327) buffer fulls due to suspend moves
[1970-Jan-01 01:54:07.832063]: Libstepper All Axis Abort
[1970-Jan-01 01:54:28.989857]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 01:54:28.991829]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:54:30.240232]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:54:30.517439]: GetCachedToolUsageStats called
[1970-Jan-01 01:54:32.132672]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:54:36.045002]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:54:40.928907]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:54:45.022996]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:54:49.245406]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:54:55.959111]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:54:59.839785]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:55:04.201729]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:55:08.665738]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:55:12.658811]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:55:16.692588]:  wait for axis 0 full: false offset: 90 l3map offset:    90 status: 1 position 0 status count 1001
[1970-Jan-01 01:55:16.966112]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:55:20.794787]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:55:23.631355]: Raw HES proceeding
[1970-Jan-01 01:55:23.675322]: Got raw val 24038, saturated: true
[1970-Jan-01 01:55:23.713224]: Returning HES
[1970-Jan-01 01:55:23.714915]: Sending back val 24038, saturated true
[1970-Jan-01 01:55:23.874811]: GetCachedToolUsageStats called
[1970-Jan-01 01:55:23.905899]: Toolhead Abort
[1970-Jan-01 01:55:23.907894]: aborting pru with shutdown=true
[1970-Jan-01 01:55:23.910557]: Last sync period had (0,0,124164) buffer fulls due to suspend moves
[1970-Jan-01 01:55:23.913093]: Libstepper All Axis Abort
[1970-Jan-01 01:55:30.894006]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 01:55:30.896652]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:55:32.161007]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:55:32.442591]: GetCachedToolUsageStats called
[1970-Jan-01 01:55:33.668772]: Steps overrun! last 64863 and just got 10182
[1970-Jan-01 01:55:33.670694]: calculated 10854
[1970-Jan-01 01:55:37.314985]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:55:41.528248]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:55:45.504032]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:55:49.964661]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:55:54.115133]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:55:54.472866]: Toolhead 0 state error: 80
[1970-Jan-01 01:55:56.598740]: GetCachedToolUsageStats called
[1970-Jan-01 01:55:56.626620]: Toolhead Abort
[1970-Jan-01 01:55:56.628374]: aborting pru with shutdown=true
[1970-Jan-01 01:55:56.631347]: Last sync period had (0,0,125862) buffer fulls due to suspend moves
[1970-Jan-01 01:55:56.633140]: Libstepper All Axis Abort
[1970-Jan-01 01:55:57.061275]: GetCachedToolUsageStats called
[1970-Jan-01 01:56:11.677420]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:56:15.040478]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:56:18.232957]: Raw HES proceeding
[1970-Jan-01 01:56:18.302308]: HES not updated!
[1970-Jan-01 01:56:18.340933]: Toolhead 0 state error: 0
[1970-Jan-01 01:56:18.345484]: Got raw val 24034, saturated: true
[1970-Jan-01 01:56:18.380599]: Returning HES
[1970-Jan-01 01:56:18.382285]: Sending back val 24034, saturated true
[1970-Jan-01 01:56:18.562392]: GetCachedToolUsageStats called
[1970-Jan-01 01:56:18.611352]: Toolhead Abort
[1970-Jan-01 01:56:18.613111]: aborting pru with shutdown=true
[1970-Jan-01 01:56:18.615876]: Last sync period had (0,0,127695) buffer fulls due to suspend moves
[1970-Jan-01 01:56:18.617659]: Libstepper All Axis Abort
[1970-Jan-01 01:56:20.028099]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 01:56:20.029876]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:56:21.478131]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:56:21.772983]: GetCachedToolUsageStats called
[1970-Jan-01 01:56:26.976914]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:56:30.847685]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:56:35.145904]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:56:39.657292]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:56:43.536878]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:56:48.087803]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:56:52.182587]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:56:52.446639]: Toolhead 0 state error: 80
[1970-Jan-01 01:56:54.579983]: GetCachedToolUsageStats called
[1970-Jan-01 01:56:54.609254]: Toolhead Abort
[1970-Jan-01 01:56:54.613230]: aborting pru with shutdown=true
[1970-Jan-01 01:56:54.615961]: Last sync period had (0,0,129936) buffer fulls due to suspend moves
[1970-Jan-01 01:56:54.617789]: Libstepper All Axis Abort
[1970-Jan-01 01:56:55.314006]: GetCachedToolUsageStats called
[1970-Jan-01 01:56:56.513720]: Toolhead 0 state error: 54
[1970-Jan-01 01:56:56.515710]: Tool UID becomes 0.
[1970-Jan-01 01:56:58.807372]: Toolhead Abort
[1970-Jan-01 01:56:58.809303]: aborting pru with shutdown=true
[1970-Jan-01 01:56:58.812670]: Last sync period had (0,0,129960) buffer fulls due to suspend moves
[1970-Jan-01 01:56:58.814409]: Libstepper All Axis Abort
[1970-Jan-01 01:57:40.793090]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 01:57:40.794908]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:57:43.933654]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:57:44.723337]: Toolhead Abort
[1970-Jan-01 01:57:44.725115]: aborting pru with shutdown=true
[1970-Jan-01 01:57:44.727873]: Last sync period had (0,0,130452) buffer fulls due to suspend moves
[1970-Jan-01 01:57:44.729659]: Libstepper All Axis Abort
[1970-Jan-01 01:57:57.060869]: Toolhead 0 state error: 0
[1970-Jan-01 01:57:57.062617]: Checking tool eeprom version
[1970-Jan-01 01:57:57.064279]: Commanding tool usage stat retrieve
[1970-Jan-01 01:57:57.066083]: New tool uid 0xac97 attached, updating info cache
[1970-Jan-01 01:57:57.070615]: Connected tool has eepromv4
[1970-Jan-01 01:57:57.076925]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-01 01:57:57.146923]: GetCachedToolUsageStats called
[1970-Jan-01 01:57:57.196141]: Last sync period had (0,0,130572) buffer fulls due to suspend moves
[1970-Jan-01 01:57:57.197963]: Syncing turned false
[1970-Jan-01 01:57:57.199699]: Toolhead Abort
[1970-Jan-01 01:57:57.201790]: aborting pru with shutdown=true
[1970-Jan-01 01:57:57.204389]: Last sync period had (0,0,130572) buffer fulls due to suspend moves
[1970-Jan-01 01:57:57.206239]: Libstepper All Axis Abort
[1970-Jan-01 01:57:57.208023]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 01:57:57.210213]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:57:57.212765]: Commanding tool usage stat retrieve
[1970-Jan-01 01:57:57.238014]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-01 01:57:57.254609]: Commanding tool usage stat retrieve
[1970-Jan-01 01:57:57.276710]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-01 01:58:03.879531]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 01:58:03.881674]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:58:05.095805]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:58:05.133370]: bronx lowest mem space: 0x34e bytes
[1970-Jan-01 01:58:05.532704]: Toolhead 0 state error: 80
[1970-Jan-01 01:58:06.770750]: Toolhead 0 state error: 0
[1970-Jan-01 01:58:15.306802]: Toolhead 0 state error: 80
[1970-Jan-01 01:58:18.302007]: Toolhead 0 state error: 0
[1970-Jan-01 01:58:27.016724]: Toolhead 0 state error: 80
[1970-Jan-01 01:58:29.471671]: Toolhead 0 state error: 0
[1970-Jan-01 01:59:02.563371]: GetCachedToolUsageStats called
[1970-Jan-01 01:59:03.722647]: Steps overrun! last 55773 and just got 1092
[1970-Jan-01 01:59:03.724380]: calculated 10854
[1970-Jan-01 01:59:05.432671]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:59:09.552075]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:59:12.934120]: Raw HES proceeding
[1970-Jan-01 01:59:12.984396]: Got raw val 24025, saturated: true
[1970-Jan-01 01:59:13.110317]: Returning HES
[1970-Jan-01 01:59:13.111996]: Sending back val 24025, saturated true
[1970-Jan-01 01:59:13.305925]: GetCachedToolUsageStats called
[1970-Jan-01 01:59:13.331098]: Toolhead Abort
[1970-Jan-01 01:59:13.332984]: aborting pru with shutdown=true
[1970-Jan-01 01:59:13.335616]: Last sync period had (0,0,135576) buffer fulls due to suspend moves
[1970-Jan-01 01:59:13.337385]: Libstepper All Axis Abort
[1970-Jan-01 01:59:15.689538]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 01:59:15.691537]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:59:17.139511]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:59:17.552707]: GetCachedToolUsageStats called
[1970-Jan-01 01:59:21.892582]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:59:26.371434]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:59:30.946647]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:59:35.025369]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:59:38.947595]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:59:43.881784]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:59:48.031906]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:59:52.527585]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:59:54.858294]:  wait for axis 0 full: false offset: 90 l3map offset:    90 status: 1 position 0 status count 1001
[1970-Jan-01 01:59:57.172429]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:00:01.037689]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:00:05.453279]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:00:10.704904]: Raw HES proceeding
[1970-Jan-01 02:00:10.735954]: Got raw val 24028, saturated: true
[1970-Jan-01 02:00:10.752996]: Returning HES
[1970-Jan-01 02:00:10.755103]: Sending back val 24028, saturated true
[1970-Jan-01 02:00:10.976812]: GetCachedToolUsageStats called
[1970-Jan-01 02:00:11.025000]: Toolhead Abort
[1970-Jan-01 02:00:11.026768]: aborting pru with shutdown=true
[1970-Jan-01 02:00:11.029383]: Last sync period had (0,0,139395) buffer fulls due to suspend moves
[1970-Jan-01 02:00:11.031480]: Libstepper All Axis Abort
[1970-Jan-01 02:03:09.944720]: Toolhead 0 state error: 56
[1970-Jan-01 02:03:11.953785]: Toolhead 0 state error: 0
[1970-Jan-01 02:23:01.832757]: Toolhead 0 state error: 80
[1970-Jan-01 02:23:07.875160]: Toolhead 0 state error: 54
[1970-Jan-01 02:23:07.876920]: Tool UID becomes 0.
[1970-Jan-01 02:24:02.006630]: Checking tool eeprom version
[1970-Jan-01 02:24:02.008950]: Commanding tool usage stat retrieve
[1970-Jan-01 02:24:02.010805]: New tool uid 0xac97 attached, updating info cache
[1970-Jan-01 02:24:02.072966]: GetCachedToolUsageStats called
[1970-Jan-01 02:24:03.591909]: Toolhead 0 state error: 80
[1970-Jan-01 02:24:03.593614]: Connected tool has eepromv4
[1970-Jan-01 02:24:03.797052]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 02:24:03.798807]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:24:05.512008]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 02:24:05.538683]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-01 02:24:20.327905]: Toolhead 0 state error: 54
[1970-Jan-01 02:24:20.329680]: Tool UID becomes 0.
[1970-Jan-01 02:24:20.612188]: Toolhead Abort
[1970-Jan-01 02:24:20.615044]: aborting pru with shutdown=true
[1970-Jan-01 02:24:20.620942]: Last sync period had (0,0,149049) buffer fulls due to suspend moves
[1970-Jan-01 02:24:20.622773]: Libstepper All Axis Abort
[1970-Jan-01 02:24:24.924302]: Checking tool eeprom version
[1970-Jan-01 02:24:24.926232]: Commanding tool usage stat retrieve
[1970-Jan-01 02:24:24.927938]: New tool uid 0xac97 attached, updating info cache
[1970-Jan-01 02:24:24.999299]: GetCachedToolUsageStats called
[1970-Jan-01 02:24:25.034038]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 02:24:25.035938]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:24:25.151838]: Toolhead 0 state error: 80
[1970-Jan-01 02:24:25.153604]: Connected tool has eepromv4
[1970-Jan-01 02:24:26.155823]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-01 02:24:26.216251]: Last sync period had (0,0,149112) buffer fulls due to suspend moves
[1970-Jan-01 02:24:26.218115]: Syncing turned false
[1970-Jan-01 02:24:26.219891]: Toolhead Abort
[1970-Jan-01 02:24:26.226303]: aborting pru with shutdown=true
[1970-Jan-01 02:24:26.229049]: Last sync period had (0,0,149112) buffer fulls due to suspend moves
[1970-Jan-01 02:24:26.231661]: Libstepper All Axis Abort
[1970-Jan-01 02:24:26.233593]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 02:24:26.235506]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:24:26.237651]: Commanding tool usage stat retrieve
[1970-Jan-01 02:24:26.305352]: Commanding tool usage stat retrieve
[1970-Jan-01 02:24:26.430382]: Commanding tool usage stat retrieve
[1970-Jan-01 02:24:30.642281]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-01 02:24:32.150623]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-01 02:24:33.657506]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-01 02:24:34.662380]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 02:24:34.664189]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:24:35.979599]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 02:24:41.019705]: Toolhead 0 state error: 0
[1970-Jan-01 02:25:09.872761]: Toolhead 0 state error: 80
[1970-Jan-01 02:25:30.669004]: Toolhead 0 state error: 0
[1970-Jan-01 02:27:10.617029]: GetCachedToolUsageStats called
[1970-Jan-01 02:27:12.036284]: Steps overrun! last 55367 and just got 686
[1970-Jan-01 02:27:12.038037]: calculated 10854
[1970-Jan-01 02:27:13.207984]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:27:17.011239]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:27:21.464642]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:27:25.888241]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:27:31.102903]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:27:35.096829]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:27:38.977796]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:27:44.005901]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:27:48.040739]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:27:52.071185]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:27:55.739177]:  wait for axis 0 full: false offset: 90 l3map offset:    90 status: 1 position 0 status count 1001
[1970-Jan-01 02:27:56.403955]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:28:03.519620]: Raw HES proceeding
[1970-Jan-01 02:28:03.562353]: Got raw val 24033, saturated: true
[1970-Jan-01 02:28:03.588076]: Returning HES
[1970-Jan-01 02:28:03.589768]: Sending back val 24033, saturated true
[1970-Jan-01 02:28:03.796903]: GetCachedToolUsageStats called
[1970-Jan-01 02:28:03.849794]: Toolhead Abort
[1970-Jan-01 02:28:03.861984]: aborting pru with shutdown=true
[1970-Jan-01 02:28:03.865283]: Last sync period had (0,0,164754) buffer fulls due to suspend moves
[1970-Jan-01 02:28:03.867376]: Libstepper All Axis Abort
[1970-Jan-01 02:28:05.798552]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 02:28:05.810636]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:28:07.022747]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 02:28:21.084493]: GetCachedToolUsageStats called
[1970-Jan-01 02:28:22.491527]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:28:26.620696]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:28:28.412197]: Toolhead 0 state error: 80
[1970-Jan-01 02:28:28.767375]: Toolhead 0 state error: 0
[1970-Jan-01 02:28:32.609719]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:28:36.873887]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:28:41.070548]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:28:46.438739]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:28:50.684210]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:28:55.393661]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:29:00.127931]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:29:04.398301]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:29:05.617048]: Toolhead 0 state error: 54
[1970-Jan-01 02:29:05.619193]: Tool UID becomes 0.
[1970-Jan-01 02:29:07.732706]: Toolhead Abort
[1970-Jan-01 02:29:07.734537]: aborting pru with shutdown=true
[1970-Jan-01 02:29:07.737235]: Last sync period had (0,0,168936) buffer fulls due to suspend moves
[1970-Jan-01 02:29:07.739161]: Libstepper All Axis Abort
[1970-Jan-01 07:17:51.434254]: GetCachedToolUsageStats called
[1970-Jan-01 08:03:54.037116]: GetCachedToolUsageStats called
[1970-Jan-01 08:25:41.575797]: GetCachedToolUsageStats called
[1970-Jan-01 08:55:58.720618]: GetCachedToolUsageStats called
[1970-Jan-01 09:34:30.739335]: GetCachedToolUsageStats called
[1970-Jan-01 09:45:15.861156]: GetCachedToolUsageStats called
[1970-Jan-01 16:22:57.490443]: GetCachedToolUsageStats called
[1970-Jan-01 18:07:22.215676]: GetCachedToolUsageStats called
[1970-Jan-01 19:22:10.268735]: GetCachedToolUsageStats called
[1970-Jan-01 22:49:21.478901]: GetCachedToolUsageStats called
[1970-Jan-02 00:04:57.497224]: GetCachedToolUsageStats called
[1970-Jan-02 00:52:14.371178]: GetCachedToolUsageStats called
[1970-Jan-02 03:33:21.555309]: GetCachedToolUsageStats called
[1970-Jan-02 06:31:17.732594]: GetCachedToolUsageStats called
[1970-Jan-02 07:52:36.328305]: GetCachedToolUsageStats called
[1970-Jan-02 20:43:43.549049]: GetCachedToolUsageStats called
[1970-Jan-03 16:52:31.317550]: GetCachedToolUsageStats called
[1970-Jan-03 17:21:04.176887]: GetCachedToolUsageStats called
[1970-Jan-03 20:06:22.942762]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-03 20:06:22.944586]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-03 20:06:27.124069]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-03 20:06:27.630365]: Toolhead Abort
[1970-Jan-03 20:06:27.632184]: aborting pru with shutdown=true
[1970-Jan-03 20:06:27.634823]: Last sync period had (0,0,1564425) buffer fulls due to suspend moves
[1970-Jan-03 20:06:27.636643]: Libstepper All Axis Abort
[1970-Jan-03 20:06:34.281674]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-03 20:06:34.594660]: Toolhead Abort
[1970-Jan-03 20:06:34.596534]: aborting pru with shutdown=true
[1970-Jan-03 20:06:34.599715]: Last sync period had (0,0,1564611) buffer fulls due to suspend moves
[1970-Jan-03 20:06:34.601689]: Libstepper All Axis Abort
[1970-Jan-03 20:06:37.232432]: Checking tool eeprom version
[1970-Jan-03 20:06:37.234090]: Commanding tool usage stat retrieve
[1970-Jan-03 20:06:37.235727]: New tool uid 0xac97 attached, updating info cache
[1970-Jan-03 20:06:37.356784]: GetCachedToolUsageStats called
[1970-Jan-03 20:06:38.735342]: Toolhead 0 state error: 80
[1970-Jan-03 20:06:38.737038]: Connected tool has eepromv4
[1970-Jan-03 20:06:39.262985]: Last sync period had (0,0,1564659) buffer fulls due to suspend moves
[1970-Jan-03 20:06:39.264802]: Syncing turned false
[1970-Jan-03 20:06:39.266551]: Toolhead Abort
[1970-Jan-03 20:06:39.268637]: aborting pru with shutdown=true
[1970-Jan-03 20:06:39.272022]: Last sync period had (0,0,1564659) buffer fulls due to suspend moves
[1970-Jan-03 20:06:39.273797]: Libstepper All Axis Abort
[1970-Jan-03 20:06:39.275408]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-03 20:06:39.277175]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-03 20:06:39.279177]: Commanding tool usage stat retrieve
[1970-Jan-03 20:06:39.292324]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-03 20:06:39.340789]: Commanding tool usage stat retrieve
[1970-Jan-03 20:06:39.373541]: Commanding tool usage stat retrieve
[1970-Jan-03 20:06:39.402523]: Commanding tool usage stat retrieve
[1970-Jan-03 20:06:42.335606]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-03 20:06:43.846315]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-03 20:06:45.364499]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-03 20:06:46.871778]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-04 03:04:34.433503]: GetCachedToolUsageStats called
[1970-Jan-04 08:20:15.363906]: GetCachedToolUsageStats called
[1970-Jan-04 16:49:08.016688]: GetCachedToolUsageStats called
[1970-Jan-04 21:46:02.109204]: GetCachedToolUsageStats called
[1970-Jan-04 21:49:30.715942]: GetCachedToolUsageStats called
[1970-Jan-04 21:53:00.068942]: GetCachedToolUsageStats called
[1970-Jan-04 21:56:30.082266]: GetCachedToolUsageStats called
[1970-Jan-04 22:00:00.619793]: GetCachedToolUsageStats called
[1970-Jan-04 22:03:31.098190]: GetCachedToolUsageStats called
[1970-Jan-04 22:07:00.256038]: GetCachedToolUsageStats called
[1970-Jan-04 22:10:16.624619]: GetCachedToolUsageStats called
[1970-Jan-04 22:13:48.635263]: GetCachedToolUsageStats called
[1970-Jan-04 22:17:17.797953]: GetCachedToolUsageStats called
[1970-Jan-04 22:20:47.276227]: GetCachedToolUsageStats called
[1970-Jan-04 22:24:16.441464]: GetCachedToolUsageStats called
[1970-Jan-04 22:27:47.094620]: GetCachedToolUsageStats called
[1970-Jan-04 22:30:31.861979]: GetCachedToolUsageStats called
[1970-Jan-05 00:04:35.281066]: GetCachedToolUsageStats called
[1970-Jan-05 00:37:52.195061]: GetCachedToolUsageStats called
[1970-Jan-05 04:23:00.862433]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-05 04:23:00.864861]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-05 04:23:02.071941]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-05 04:23:06.492993]: Toolhead 0 state error: 0
[1970-Jan-05 04:23:12.016066]: Toolhead 0 state error: 80
[1970-Jan-05 04:23:12.645258]: Toolhead 0 state error: 0
[1970-Jan-05 04:23:26.454771]: Toolhead 0 state error: 80
[1970-Jan-05 04:23:29.880791]: Toolhead 0 state error: 0
[1970-Jan-05 04:23:32.329555]: Toolhead 0 state error: 80
[1970-Jan-05 04:23:41.346484]: Toolhead 0 state error: 0
[1970-Jan-05 04:23:49.584948]: Toolhead 0 state error: 80
[1970-Jan-05 04:23:50.844376]: Toolhead 0 state error: 0
[1970-Jan-05 04:23:59.328957]: Toolhead 0 state error: 80
[1970-Jan-05 04:25:50.341020]: GetCachedToolUsageStats called
[1970-Jan-05 04:25:52.113498]: Steps overrun! last 59303 and just got 4622
[1970-Jan-05 04:25:52.115348]: calculated 10854
[1970-Jan-05 04:25:53.554779]: Toolhead 0 state error: 0
[1970-Jan-05 04:25:56.330412]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-05 04:25:58.787978]: Toolhead 0 state error: 80
[1970-Jan-05 04:26:02.127714]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-05 04:26:03.010954]: Toolhead 0 state error: 0
[1970-Jan-05 04:26:07.030282]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-05 04:26:11.761187]: Toolhead 0 state error: 80
[1970-Jan-05 04:26:12.931018]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-05 04:26:15.555350]: Toolhead 0 state error: 0
[1970-Jan-05 04:26:17.973452]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-05 04:26:23.603654]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-05 04:26:23.886884]: Toolhead 0 state error: 80
[1970-Jan-05 04:26:26.601227]: Toolhead 0 state error: 0
[1970-Jan-05 04:26:28.931997]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-05 04:26:34.136444]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-05 04:26:39.563524]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-05 04:26:43.342596]: Raw HES proceeding
[1970-Jan-05 04:26:43.359161]: Got raw val 24035, saturated: true
[1970-Jan-05 04:26:43.374279]: Returning HES
[1970-Jan-05 04:26:43.376436]: Sending back val 24035, saturated true
[1970-Jan-05 04:26:43.558705]: GetCachedToolUsageStats called
[1970-Jan-05 04:26:43.602347]: Toolhead Abort
[1970-Jan-05 04:26:43.604129]: aborting pru with shutdown=true
[1970-Jan-05 04:26:43.606853]: Last sync period had (0,0,2261928) buffer fulls due to suspend moves
[1970-Jan-05 04:26:43.609021]: Libstepper All Axis Abort
[1970-Jan-05 04:26:47.614004]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-05 04:26:47.615810]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-05 04:26:48.807133]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-05 04:26:48.826698]: Toolhead 0 state error: 80
[1970-Jan-05 04:26:49.633936]: Toolhead 0 state error: 0
[1970-Jan-05 04:26:59.684684]: GetCachedToolUsageStats called
[1970-Jan-05 04:27:04.505122]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-05 04:27:10.350550]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-05 04:27:12.901441]: Toolhead 0 state error: 80
[1970-Jan-05 04:27:15.084475]: GetCachedToolUsageStats called
[1970-Jan-05 04:27:15.112826]: Toolhead Abort
[1970-Jan-05 04:27:15.115042]: aborting pru with shutdown=true
[1970-Jan-05 04:27:15.118038]: Last sync period had (0,0,2263374) buffer fulls due to suspend moves
[1970-Jan-05 04:27:15.120333]: Libstepper All Axis Abort
[1970-Jan-05 04:27:15.551026]: GetCachedToolUsageStats called
[1970-Jan-05 04:27:26.487667]: Toolhead 0 state error: 0
[1970-Jan-05 04:27:28.038457]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-05 04:27:32.058141]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-05 04:27:33.016197]: Toolhead 0 state error: 80
[1970-Jan-05 04:27:34.847900]: Toolhead 0 state error: 54
[1970-Jan-05 04:27:34.849668]: Tool UID becomes 0.
[1970-Jan-05 04:27:36.991791]: Toolhead Abort
[1970-Jan-05 04:27:36.993713]: aborting pru with shutdown=true
[1970-Jan-05 04:27:36.996452]: Last sync period had (0,0,2264832) buffer fulls due to suspend moves
[1970-Jan-05 04:27:36.998253]: Libstepper All Axis Abort
[1970-Jan-05 04:27:50.361296]: Checking tool eeprom version
[1970-Jan-05 04:27:50.364120]: Commanding tool usage stat retrieve
[1970-Jan-05 04:27:50.365807]: New tool uid 0xac97 attached, updating info cache
[1970-Jan-05 04:27:50.495109]: GetCachedToolUsageStats called
[1970-Jan-05 04:27:50.943396]: Toolhead 0 state error: 80
[1970-Jan-05 04:27:50.945147]: Connected tool has eepromv4
[1970-Jan-05 04:27:50.962281]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-05 04:27:50.964364]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-05 04:27:51.051238]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-05 04:27:52.474214]: Last sync period had (0,0,2264949) buffer fulls due to suspend moves
[1970-Jan-05 04:27:52.477160]: Syncing turned false
[1970-Jan-05 04:27:52.478917]: Toolhead Abort
[1970-Jan-05 04:27:52.489043]: aborting pru with shutdown=true
[1970-Jan-05 04:27:52.491850]: Last sync period had (0,0,2264949) buffer fulls due to suspend moves
[1970-Jan-05 04:27:52.493622]: Libstepper All Axis Abort
[1970-Jan-05 04:27:52.495322]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-05 04:27:52.497164]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-05 04:27:52.499043]: Commanding tool usage stat retrieve
[1970-Jan-05 04:27:52.529456]: Commanding tool usage stat retrieve
[1970-Jan-05 04:27:52.559089]: Commanding tool usage stat retrieve
[1970-Jan-05 04:27:54.448568]: Last sync period had (0,0,2264979) buffer fulls due to suspend moves
[1970-Jan-05 04:27:54.450598]: Syncing turned false
[1970-Jan-05 04:27:54.452351]: Toolhead Abort
[1970-Jan-05 04:27:54.454146]: aborting pru with shutdown=true
[1970-Jan-05 04:27:54.458115]: Last sync period had (0,0,2264979) buffer fulls due to suspend moves
[1970-Jan-05 04:27:54.461187]: Libstepper All Axis Abort
[1970-Jan-05 04:27:54.462812]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-05 04:27:54.464515]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-05 04:27:54.466506]: Commanding tool usage stat retrieve
[1970-Jan-05 04:27:54.495199]: Commanding tool usage stat retrieve
[1970-Jan-05 04:27:58.825842]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-05 04:27:59.856495]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-05 04:27:59.957666]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-05 04:27:59.959604]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-05 04:28:01.153357]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-05 04:28:02.822482]: Toolhead 0 state error: 0
[1970-Jan-05 04:28:04.987043]: Toolhead 0 state error: 80
[1970-Jan-05 04:28:07.042899]: Toolhead 0 state error: 0
[1970-Jan-05 04:28:07.583817]: Toolhead 0 state error: 80
[1970-Jan-05 04:28:11.140647]: Toolhead 0 state error: 0
[1970-Jan-05 04:28:12.262312]: Toolhead 0 state error: 80
[1970-Jan-05 04:28:13.022017]: Toolhead 0 state error: 0
[1970-Jan-05 04:28:30.103403]: Toolhead 0 state error: 80
[1970-Jan-05 04:28:34.158180]: Toolhead 0 state error: 0
[1970-Jan-05 04:28:35.250919]: Toolhead 0 state error: 80
[1970-Jan-05 04:28:35.887159]: Toolhead 0 state error: 0
[1970-Jan-05 04:28:41.319393]: GetCachedToolUsageStats called
[1970-Jan-05 04:28:44.351366]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-05 04:28:48.441155]: Toolhead 0 state error: 80
[1970-Jan-05 04:28:49.078809]: Toolhead 0 state error: 0
[1970-Jan-05 04:28:49.338703]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-05 04:28:53.017310]: Toolhead 0 state error: 80
[1970-Jan-05 04:28:55.492743]: GetCachedToolUsageStats called
[1970-Jan-05 04:28:55.569607]: Toolhead Abort
[1970-Jan-05 04:28:55.582823]: aborting pru with shutdown=true
[1970-Jan-05 04:28:55.585586]: Last sync period had (0,0,2268189) buffer fulls due to suspend moves
[1970-Jan-05 04:28:55.587811]: Libstepper All Axis Abort
[1970-Jan-05 04:28:56.130386]: GetCachedToolUsageStats called
[1970-Jan-05 04:28:59.812319]: Toolhead 0 state error: 0
[1970-Jan-05 04:29:00.890572]: Toolhead 0 state error: 80
[1970-Jan-05 04:29:01.253290]: Toolhead 0 state error: 0
[1970-Jan-05 04:29:08.169644]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-05 04:29:12.327671]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-05 04:29:17.560451]: Raw HES proceeding
[1970-Jan-05 04:29:17.586998]: Got raw val 24046, saturated: true
[1970-Jan-05 04:29:17.615494]: Returning HES
[1970-Jan-05 04:29:17.617319]: Sending back val 24046, saturated true
[1970-Jan-05 04:29:17.813148]: GetCachedToolUsageStats called
[1970-Jan-05 04:29:17.866142]: Toolhead Abort
[1970-Jan-05 04:29:17.867896]: aborting pru with shutdown=true
[1970-Jan-05 04:29:17.880814]: Last sync period had (0,0,2269716) buffer fulls due to suspend moves
[1970-Jan-05 04:29:17.882604]: Libstepper All Axis Abort
[1970-Jan-05 04:29:20.326009]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-05 04:29:20.327804]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-05 04:29:21.532621]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-05 04:29:21.680921]: GetCachedToolUsageStats called
[1970-Jan-05 04:29:23.028910]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-05 04:29:29.635251]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-05 04:29:34.376079]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-05 04:29:40.315142]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-05 04:29:45.287962]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-05 04:29:50.101375]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-05 04:29:52.511400]: Toolhead 0 state error: 80
[1970-Jan-05 04:29:54.638722]: GetCachedToolUsageStats called
[1970-Jan-05 04:29:54.666618]: Toolhead Abort
[1970-Jan-05 04:29:54.668580]: aborting pru with shutdown=true
[1970-Jan-05 04:29:54.671352]: Last sync period had (0,0,2271600) buffer fulls due to suspend moves
[1970-Jan-05 04:29:54.673165]: Libstepper All Axis Abort
[1970-Jan-05 04:29:55.451438]: GetCachedToolUsageStats called
[1970-Jan-05 04:29:56.911267]: Toolhead 0 state error: 0
[1970-Jan-05 04:30:00.902591]: Toolhead 0 state error: 80
[1970-Jan-05 04:30:03.515342]: Toolhead 0 state error: 0
[1970-Jan-05 04:30:08.550695]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-05 04:30:12.751399]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-05 04:30:16.710599]: Raw HES proceeding
[1970-Jan-05 04:30:16.742664]: Got raw val 24033, saturated: true
[1970-Jan-05 04:30:16.767967]: Returning HES
[1970-Jan-05 04:30:16.769815]: Sending back val 24033, saturated true
[1970-Jan-05 04:30:16.962821]: GetCachedToolUsageStats called
[1970-Jan-05 04:30:17.008464]: Toolhead Abort
[1970-Jan-05 04:30:17.020544]: aborting pru with shutdown=true
[1970-Jan-05 04:30:17.024119]: Last sync period had (0,0,2273085) buffer fulls due to suspend moves
[1970-Jan-05 04:30:17.026082]: Libstepper All Axis Abort
[1970-Jan-05 04:30:21.237140]: Toolhead 0 state error: 54
[1970-Jan-05 04:30:21.239051]: Tool UID becomes 0.
[1970-Jan-05 04:31:07.438881]: Toolhead Abort
[1970-Jan-05 04:31:07.440850]: aborting pru with shutdown=true
[1970-Jan-05 04:31:07.443464]: Last sync period had (0,0,2273394) buffer fulls due to suspend moves
[1970-Jan-05 04:31:07.445224]: Libstepper All Axis Abort
[1970-Jan-05 04:31:10.335566]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-05 04:31:10.337481]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-05 04:31:13.790629]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-05 04:31:15.004244]: Toolhead Abort
[1970-Jan-05 04:31:15.010471]: aborting pru with shutdown=true
[1970-Jan-05 04:31:15.013284]: Last sync period had (0,0,2273607) buffer fulls due to suspend moves
[1970-Jan-05 04:31:15.016221]: Libstepper All Axis Abort
[1970-Jan-05 04:31:27.416827]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-05 04:31:27.973135]: Toolhead Abort
[1970-Jan-05 04:31:27.974901]: aborting pru with shutdown=true
[1970-Jan-05 04:31:27.978100]: Last sync period had (0,0,2273814) buffer fulls due to suspend moves
[1970-Jan-05 04:31:27.979896]: Libstepper All Axis Abort
[1970-Jan-05 04:31:35.720709]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-05 04:31:36.222855]: Toolhead Abort
[1970-Jan-05 04:31:36.224758]: aborting pru with shutdown=true
[1970-Jan-05 04:31:36.227957]: Last sync period had (0,0,2274021) buffer fulls due to suspend moves
[1970-Jan-05 04:31:36.229740]: Libstepper All Axis Abort
[1970-Jan-05 04:31:50.079011]: Toolhead 0 state error: 80
[1970-Jan-05 04:31:50.081108]: Checking tool eeprom version
[1970-Jan-05 04:31:50.083064]: Commanding tool usage stat retrieve
[1970-Jan-05 04:31:50.084742]: New tool uid 0xac97 attached, updating info cache
[1970-Jan-05 04:31:50.153827]: GetCachedToolUsageStats called
[1970-Jan-05 04:31:50.204155]: Last sync period had (0,0,2274195) buffer fulls due to suspend moves
[1970-Jan-05 04:31:50.206006]: Syncing turned false
[1970-Jan-05 04:31:50.207761]: Toolhead Abort
[1970-Jan-05 04:31:50.209713]: aborting pru with shutdown=true
[1970-Jan-05 04:31:50.212531]: Last sync period had (0,0,2274195) buffer fulls due to suspend moves
[1970-Jan-05 04:31:50.214321]: Libstepper All Axis Abort
[1970-Jan-05 04:31:50.216113]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-05 04:31:50.217858]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-05 04:31:50.219758]: Commanding tool usage stat retrieve
[1970-Jan-05 04:31:50.261741]: Commanding tool usage stat retrieve
[1970-Jan-05 04:31:50.344970]: Commanding tool usage stat retrieve
[1970-Jan-05 04:31:50.438535]: Commanding tool usage stat retrieve
[1970-Jan-05 04:31:50.468611]: Commanding tool usage stat retrieve
[1970-Jan-05 04:31:50.513956]: Commanding tool usage stat retrieve
[1970-Jan-05 04:31:52.038025]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-05 04:31:53.553274]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-05 04:31:55.122227]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-05 04:31:56.607819]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-05 04:31:56.706293]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-05 04:31:56.708062]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-05 04:31:56.740529]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-05 04:31:57.916113]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-05 04:31:58.046373]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-05 04:31:59.300938]: Toolhead 0 state error: 0
[1970-Jan-05 04:32:09.755692]: Toolhead 0 state error: 80
[1970-Jan-05 04:32:12.891114]: Toolhead 0 state error: 0
[1970-Jan-05 04:32:21.347837]: Toolhead 0 state error: 80
[1970-Jan-05 04:32:22.131734]: Toolhead 0 state error: 0
[1970-Jan-05 04:33:00.647630]: GetCachedToolUsageStats called
[1970-Jan-05 04:33:01.904502]: Steps overrun! last 65410 and just got 17242
[1970-Jan-05 04:33:01.906217]: calculated 17367
[1970-Jan-05 04:33:03.435807]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-05 04:33:08.930952]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-05 04:33:14.491550]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-05 04:33:20.273790]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-05 04:33:25.313945]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-05 04:33:31.951772]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-05 04:33:36.916919]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-05 04:33:43.215748]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-05 04:33:48.419185]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-05 04:33:52.401341]: Raw HES proceeding
[1970-Jan-05 04:33:52.427787]: Got raw val 24029, saturated: true
[1970-Jan-05 04:33:52.546161]: Returning HES
[1970-Jan-05 04:33:52.547986]: Sending back val 24029, saturated true
[1970-Jan-05 04:33:52.740341]: GetCachedToolUsageStats called
[1970-Jan-05 04:33:52.785429]: Toolhead Abort
[1970-Jan-05 04:33:52.787194]: aborting pru with shutdown=true
[1970-Jan-05 04:33:52.790289]: Last sync period had (0,0,2281029) buffer fulls due to suspend moves
[1970-Jan-05 04:33:52.792065]: Libstepper All Axis Abort
[1970-Jan-05 04:33:57.183778]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-05 04:33:57.185557]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-05 04:33:58.385565]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-05 04:34:06.435306]: GetCachedToolUsageStats called
[1970-Jan-05 04:34:20.142481]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-05 04:34:21.348166]:  wait for axis 0 full: false offset: 72 l3map offset:    72 status: 1 position 0 status count 1001
[1970-Jan-05 04:34:24.542865]: Raw HES proceeding
[1970-Jan-05 04:34:24.580452]: Got raw val 24028, saturated: true
[1970-Jan-05 04:34:24.595665]: Returning HES
[1970-Jan-05 04:34:24.597382]: Sending back val 24028, saturated true
[1970-Jan-05 04:34:24.695973]: GetCachedToolUsageStats called
[1970-Jan-05 04:34:24.722562]: Toolhead Abort
[1970-Jan-05 04:34:24.725476]: aborting pru with shutdown=true
[1970-Jan-05 04:34:24.728108]: Last sync period had (0,0,2282574) buffer fulls due to suspend moves
[1970-Jan-05 04:34:24.729965]: Libstepper All Axis Abort
[1970-Jan-05 04:34:29.142609]: Toolhead 0 state error: 80
[1970-Jan-05 04:34:39.036598]: Toolhead 0 state error: 54
[1970-Jan-05 04:34:39.038377]: Tool UID becomes 0.
[1970-Jan-05 04:43:36.488610]: Toolhead Abort
[1970-Jan-05 04:43:36.490800]: aborting pru with shutdown=true
[1970-Jan-05 04:43:36.493511]: Last sync period had (0,0,2285832) buffer fulls due to suspend moves
[1970-Jan-05 04:43:36.495288]: Libstepper All Axis Abort
[1970-Jan-05 04:43:39.102475]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-05 04:43:39.105379]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-05 04:43:41.940927]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-05 04:43:42.596159]: Toolhead Abort
[1970-Jan-05 04:43:42.598358]: aborting pru with shutdown=true
[1970-Jan-05 04:43:42.606109]: Last sync period had (0,0,2285961) buffer fulls due to suspend moves
[1970-Jan-05 04:43:42.608558]: Libstepper All Axis Abort
[1970-Jan-05 04:43:48.140716]: Checking tool eeprom version
[1970-Jan-05 04:43:48.142412]: Commanding tool usage stat retrieve
[1970-Jan-05 04:43:48.144717]: New tool uid 0xac97 attached, updating info cache
[1970-Jan-05 04:43:48.216613]: GetCachedToolUsageStats called
[1970-Jan-05 04:43:48.250408]: Last sync period had (0,0,2286018) buffer fulls due to suspend moves
[1970-Jan-05 04:43:48.252273]: Syncing turned false
[1970-Jan-05 04:43:48.254171]: Toolhead Abort
[1970-Jan-05 04:43:48.255934]: aborting pru with shutdown=true
[1970-Jan-05 04:43:48.258553]: Last sync period had (0,0,2286018) buffer fulls due to suspend moves
[1970-Jan-05 04:43:48.260528]: Libstepper All Axis Abort
[1970-Jan-05 04:43:48.262330]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-05 04:43:48.264078]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-05 04:43:48.266331]: Commanding tool usage stat retrieve
[1970-Jan-05 04:43:48.300673]: Commanding tool usage stat retrieve
[1970-Jan-05 04:43:48.353362]: Toolhead 0 state error: 80
[1970-Jan-05 04:43:48.370800]: Commanding tool usage stat retrieve
[1970-Jan-05 04:43:51.530925]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-05 04:43:52.777377]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-05 04:43:52.877159]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-05 04:43:52.878950]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-05 04:43:52.896335]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-05 04:43:54.076801]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-05 04:44:03.547501]: Toolhead 0 state error: 0
[1970-Jan-05 04:44:07.273264]: Toolhead 0 state error: 80
[1970-Jan-05 04:44:07.879067]: Toolhead 0 state error: 0
[1970-Jan-05 04:44:08.998973]: Toolhead 0 state error: 80
[1970-Jan-05 04:44:12.803972]: Toolhead 0 state error: 0
[1970-Jan-05 04:44:17.243513]: Toolhead 0 state error: 80
[1970-Jan-05 04:44:31.526481]: Toolhead 0 state error: 0
[1970-Jan-05 04:44:36.630759]: Toolhead 0 state error: 80
[1970-Jan-05 04:44:40.505602]: Toolhead 0 state error: 0
[1970-Jan-05 04:44:51.012759]: Toolhead 0 state error: 80
[1970-Jan-05 04:44:51.772849]: Toolhead 0 state error: 0
[1970-Jan-05 04:44:57.382977]: Toolhead 0 state error: 80
[1970-Jan-05 04:45:00.570922]: Toolhead 0 state error: 0
[1970-Jan-05 04:45:02.378729]: Toolhead 0 state error: 80
[1970-Jan-05 04:45:04.696282]: Toolhead 0 state error: 0
[1970-Jan-05 04:45:07.348814]: Toolhead 0 state error: 80
[1970-Jan-05 04:45:15.625587]: Toolhead 0 state error: 0
[1970-Jan-05 04:45:19.275054]: Toolhead 0 state error: 80
[1970-Jan-05 04:45:45.127708]: Toolhead 0 state error: 0
[1970-Jan-05 04:45:49.709029]: Toolhead 0 state error: 80
[1970-Jan-05 04:45:50.700890]: Toolhead 0 state error: 0
[1970-Jan-05 04:45:51.126996]: Toolhead 0 state error: 80
[1970-Jan-05 04:45:53.538067]: Toolhead 0 state error: 0
[1970-Jan-05 04:45:54.407419]: Toolhead 0 state error: 80
[1970-Jan-05 04:45:54.974580]: Toolhead 0 state error: 0
[1970-Jan-05 04:46:11.342894]: Toolhead 0 state error: 80
[1970-Jan-05 04:46:14.987951]: GetCachedToolUsageStats called
[1970-Jan-05 04:46:16.899837]: Toolhead 0 state error: 0
[1970-Jan-05 04:46:21.051234]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-05 04:46:26.777960]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-05 04:46:32.513291]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-05 04:46:38.026676]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-05 04:46:43.627724]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-05 04:46:48.322769]: Toolhead 0 state error: 80
[1970-Jan-05 04:46:49.243087]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-05 04:46:50.347035]: Toolhead 0 state error: 0
[1970-Jan-05 04:46:54.303714]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-05 04:47:00.448471]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-05 04:47:05.559760]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-05 04:47:07.852297]: Raw HES proceeding
[1970-Jan-05 04:47:07.895533]: Got raw val 24026, saturated: true
[1970-Jan-05 04:47:07.932852]: Returning HES
[1970-Jan-05 04:47:07.934557]: Sending back val 24026, saturated true
[1970-Jan-05 04:47:08.276174]: GetCachedToolUsageStats called
[1970-Jan-05 04:47:08.415053]: Toolhead Abort
[1970-Jan-05 04:47:08.416944]: aborting pru with shutdown=true
[1970-Jan-05 04:47:08.447043]: Last sync period had (0,0,2297541) buffer fulls due to suspend moves
[1970-Jan-05 04:47:08.449390]: Libstepper All Axis Abort
[1970-Jan-05 04:47:09.676915]: Toolhead 0 state error: 80
[1970-Jan-05 04:49:44.451558]: Toolhead 0 state error: 56
[1970-Jan-05 04:49:45.954087]: Toolhead 0 state error: 80
[1970-Jan-05 08:29:50.334018]: GetCachedToolUsageStats called
[1970-Jan-05 18:50:22.903997]: GetCachedToolUsageStats called
[1970-Jan-05 20:09:55.129354]: GetCachedToolUsageStats called
[1970-Jan-05 21:54:45.739047]: GetCachedToolUsageStats called
[1970-Jan-06 00:34:21.418391]: GetCachedToolUsageStats called
[1970-Jan-06 08:57:59.643480]: GetCachedToolUsageStats called
[1970-Jan-06 16:46:27.824434]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-06 16:46:27.826272]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-06 19:23:56.358347]: GetCachedToolUsageStats called
[1970-Jan-18 01:58:34.559567]: Toolhead 0 state error: 0
[1970-Jan-18 01:58:35.574651]: Toolhead 0 state error: 80