[1970-Jan-01 00:01:32.281653]: Loading settings from string...
[1970-Jan-01 00:01:32.570875]: Parsing toolhead settings for bronx...
[1970-Jan-01 00:01:32.620884]: Rebuilding toolhead structure
[1970-Jan-01 00:01:32.660877]: Building bronx location 0...
[1970-Jan-01 00:01:32.837806]: Initialization: heater settings
[1970-Jan-01 00:01:32.839712]: storing heater 0 to time out after 3 minutes at temp, 1 minutes with no rise of 10C, fan feedforward amount 15C
[1970-Jan-01 00:01:32.868422]: Settings: Parsing home subtree...
[1970-Jan-01 00:01:32.911813]: Init endstop for axis: 0, type: load_sense, polarity: false
[1970-Jan-01 00:01:32.919292]: Init endstop for axis: 1, type: load_sense, polarity: false
[1970-Jan-01 00:01:32.931427]: Init endstop for axis: 2, type: toolhead, polarity: false
[1970-Jan-01 00:01:32.970840]: Parsing root settings...
[1970-Jan-01 00:01:33.031064]: STEPPER CONVERSIONS: Axis 0 steps per mm: 88.5732
[1970-Jan-01 00:01:33.062222]: STEPPER CONVERSIONS: Axis 1 steps per mm: 88.5732
[1970-Jan-01 00:01:33.064056]: STEPPER CONVERSIONS: Axis 2 steps per mm: 400
[1970-Jan-01 00:01:33.065849]: STEPPER CONVERSIONS: Axis 3 steps per mm: 108.55
[1970-Jan-01 00:01:33.067753]: STEPPER CONVERSIONS: Axis 0 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 242 29 0
[1970-Jan-01 00:01:33.069960]: STEPPER CONVERSIONS: Axis 1 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 32 29 0
[1970-Jan-01 00:01:33.082428]: STEPPER CONVERSIONS: Axis 2 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 32 32 0
[1970-Jan-01 00:01:33.084589]: STEPPER CONVERSIONS: Axis 3 periods per second 17847.6 seconds per period 5.603e-05 slowest tickrate axis 3 tickrate 5.603e-05 radices 32 32 32 31
[1970-Jan-01 00:01:33.087011]: syncing set to true
[1970-Jan-01 00:01:33.116104]: Axis count unspecified, defaulting to 4
[1970-Jan-01 00:01:33.164482]: Loading capacitor model settings for extruder 0
[1970-Jan-01 00:01:33.167870]: Have 1 valid ToolheadManager pointers, 0 is 0x1de708
[1970-Jan-01 00:01:33.282761]: setting driver address to 22
[1970-Jan-01 00:01:36.540826]: Init step: 0
[1970-Jan-01 00:01:36.593221]: Reset Toolhead Program State
[1970-Jan-01 00:01:36.594871]: Toolhead programmer: Resetting
[1970-Jan-01 00:01:36.596627]: done
[1970-Jan-01 00:01:37.691146]: Init step: 1
[1970-Jan-01 00:01:37.698117]: done
[1970-Jan-01 00:01:38.193480]: Init step: 2
[1970-Jan-01 00:01:38.195179]: done
[1970-Jan-01 00:01:38.695680]: Init step: 3
[1970-Jan-01 00:01:38.872057]: done
[1970-Jan-01 00:01:39.197101]: Init step: 4
[1970-Jan-01 00:01:39.230486]: done
[1970-Jan-01 00:01:39.709607]: Init step: 5
[1970-Jan-01 00:01:39.726331]: done
[1970-Jan-01 00:01:40.211372]: Init step: 5
[1970-Jan-01 00:01:40.313516]: done
[1970-Jan-01 00:01:40.719300]: Init step: 5
[1970-Jan-01 00:01:40.800944]: done
[1970-Jan-01 00:01:41.221460]: Init step: 5
[1970-Jan-01 00:01:41.224272]: done
[1970-Jan-01 00:01:41.723979]: Init step: 5
[1970-Jan-01 00:01:41.730447]: done
[1970-Jan-01 00:01:42.225609]: Init step: 5
[1970-Jan-01 00:01:42.327622]: done
[1970-Jan-01 00:01:42.728353]: Init step: 5
[1970-Jan-01 00:01:42.741631]: Toolhead 0: Packet 0x0: Calculated CRC: 0x62f5481b  Packet CRC: 0x0
[1970-Jan-01 00:01:42.743487]: Toolhead 0 : Toolhead Response Fail with comm_error: 1  Retry # : 1
[1970-Jan-01 00:01:42.745126]: done
[1970-Jan-01 00:01:43.241082]: Init step: 5
[1970-Jan-01 00:01:43.242842]: done
[1970-Jan-01 00:01:43.734178]: Init step: 5
[1970-Jan-01 00:01:43.740464]: done
[1970-Jan-01 00:01:44.238962]: Init step: 5
[1970-Jan-01 00:01:44.351375]: done
[1970-Jan-01 00:01:44.751295]: Init step: 5
[1970-Jan-01 00:01:44.754294]: Got valid API version 6 for Toolhead 0
[1970-Jan-01 00:01:44.761917]: done
[1970-Jan-01 00:01:45.249001]: Init step: 5
[1970-Jan-01 00:01:45.261662]: done
[1970-Jan-01 00:01:45.751521]: Init step: 5
[1970-Jan-01 00:01:45.853537]: done
[1970-Jan-01 00:01:46.253947]: Init step: 5
[1970-Jan-01 00:01:46.260924]: Toolhead 0 state error: 80
[1970-Jan-01 00:01:46.262600]: Toolhead 0: Toolhead has Firmware version 1.7,734
[1970-Jan-01 00:01:46.264457]:  Toolhead 0 initialized
[1970-Jan-01 00:01:46.266202]: done
[1970-Jan-01 00:01:46.766573]: Init step: 6
[1970-Jan-01 00:01:46.768267]: done
[1970-Jan-01 00:01:47.268457]: Init step: 7
[1970-Jan-01 00:01:47.278524]: done
[1970-Jan-01 00:01:47.787447]: PRU Event: PRU_INIT
[1970-Jan-01 00:01:48.790951]: bronx lowest mem space: 0x376 bytes
[1970-Jan-01 00:01:48.792630]: Checking tool eeprom version
[1970-Jan-01 00:01:48.794226]: Commanding tool usage stat retrieve
[1970-Jan-01 00:01:48.795974]: New tool uid 0xac97 attached, updating info cache
[1970-Jan-01 00:01:50.257326]: Loading settings from string...
[1970-Jan-01 00:01:50.382579]: Parsing toolhead settings for bronx...
[1970-Jan-01 00:01:50.384922]: Initialization: heater settings
[1970-Jan-01 00:01:50.386806]: storing heater 0 to time out after 3 minutes at temp, 1 minutes with no rise of 10C, fan feedforward amount 15C
[1970-Jan-01 00:01:50.388909]: Settings: Parsing home subtree...
[1970-Jan-01 00:01:50.402093]: Init endstop for axis: 0, type: load_sense, polarity: false
[1970-Jan-01 00:01:50.403937]: Init endstop for axis: 1, type: load_sense, polarity: false
[1970-Jan-01 00:01:50.406347]: Init endstop for axis: 2, type: toolhead, polarity: false
[1970-Jan-01 00:01:50.408088]: Parsing root settings...
[1970-Jan-01 00:01:50.409961]: STEPPER CONVERSIONS: Axis 0 steps per mm: 88.5732
[1970-Jan-01 00:01:50.422097]: STEPPER CONVERSIONS: Axis 1 steps per mm: 88.5732
[1970-Jan-01 00:01:50.423916]: STEPPER CONVERSIONS: Axis 2 steps per mm: 400
[1970-Jan-01 00:01:50.425705]: STEPPER CONVERSIONS: Axis 3 steps per mm: 108.55
[1970-Jan-01 00:01:50.427682]: STEPPER CONVERSIONS: Axis 0 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 3 tickrate 5.603e-05 radices 32 32 32 31
[1970-Jan-01 00:01:50.429896]: STEPPER CONVERSIONS: Axis 1 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 3 tickrate 5.603e-05 radices 32 32 32 31
[1970-Jan-01 00:01:50.442447]: STEPPER CONVERSIONS: Axis 2 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 3 tickrate 5.603e-05 radices 32 32 32 31
[1970-Jan-01 00:01:50.444650]: STEPPER CONVERSIONS: Axis 3 periods per second 17847.6 seconds per period 5.603e-05 slowest tickrate axis 3 tickrate 5.603e-05 radices 32 32 32 31
[1970-Jan-01 00:01:50.452698]: syncing set to true
[1970-Jan-01 00:01:50.472245]: Axis count unspecified, defaulting to 4
[1970-Jan-01 00:01:50.478112]: Loading capacitor model settings for extruder 0
[1970-Jan-01 00:01:50.491967]: Have 1 valid ToolheadManager pointers, 0 is 0x1de708
[1970-Jan-01 00:01:51.636326]: Connected tool has eepromv4
[1970-Jan-01 00:01:53.220953]: Raw usage stats: retract 100574ct, extrusion 864756 steps, 3530 seconds, refurbed 0 times
[1970-Jan-01 00:02:01.207104]: bronx lowest mem space: 0x372 bytes
[1970-Jan-01 00:02:11.549263]: GetCachedToolUsageStats called
[1970-Jan-01 00:02:26.377613]: GetCachedToolUsageStats called
[1970-Jan-01 00:02:27.015107]: GetCachedToolUsageStats called
[1970-Jan-01 00:02:27.202260]: GetCachedToolUsageStats called
[1970-Jan-01 00:02:27.895727]: GetCachedToolUsageStats called
[1970-Jan-01 00:02:29.401248]: GetCachedToolUsageStats called
[1970-Jan-01 00:02:30.907335]: GetCachedToolUsageStats called
[1970-Jan-01 00:02:32.412594]: GetCachedToolUsageStats called
[1970-Jan-01 00:02:33.927608]: GetCachedToolUsageStats called
[1970-Jan-01 00:02:43.662221]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 00:02:43.663997]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 00:02:45.268587]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 00:02:48.341611]: bronx lowest mem space: 0x352 bytes
[1970-Jan-01 00:06:02.427715]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:06:06.345416]: Raw HES proceeding
[1970-Jan-01 00:06:06.380588]: HES not updated!
[1970-Jan-01 00:06:06.442448]: HES not updated!
[1970-Jan-01 00:06:06.488998]: HES not updated!
[1970-Jan-01 00:06:06.501205]: Got raw val 24031, saturated: true
[1970-Jan-01 00:06:06.516528]: Returning HES
[1970-Jan-01 00:06:06.519620]: Sending back val 24031, saturated true
[1970-Jan-01 00:06:06.584825]: TH0: 2 failures in last 342 packets (0.584795%)
[1970-Jan-01 00:06:06.586808]: Toolhead Abort
[1970-Jan-01 00:06:06.588622]: aborting pru with shutdown=true
[1970-Jan-01 00:06:06.591368]: Last sync period had (0,0,16734) buffer fulls due to suspend moves
[1970-Jan-01 00:06:06.593108]: Libstepper All Axis Abort
[1970-Jan-01 00:08:50.301716]: Toolhead 0 state error: 56
[1970-Jan-01 00:08:52.310851]: Toolhead 0 state error: 80
[1970-Jan-01 00:16:01.819336]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 00:16:01.821349]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 00:16:03.124782]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 00:18:44.607878]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:18:47.716960]: Toolhead 0 state error: 0
[1970-Jan-01 00:18:48.034432]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:18:51.827256]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:18:55.330937]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:18:58.708896]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:19:02.514520]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:19:06.012559]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:19:09.363847]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:19:13.173250]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:19:16.544239]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:19:19.358685]:  wait for axis 0 full: false offset: 90 l3map offset:    90 status: 1 position 0 status count 1001
[1970-Jan-01 00:19:20.066645]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:19:23.969322]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:19:27.286525]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:19:30.758358]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:19:35.449115]: Raw HES proceeding
[1970-Jan-01 00:19:35.486992]: Got raw val 24028, saturated: true
[1970-Jan-01 00:19:35.515921]: Returning HES
[1970-Jan-01 00:19:35.517574]: Sending back val 24028, saturated true
[1970-Jan-01 00:19:35.656767]: Toolhead Abort
[1970-Jan-01 00:19:35.658511]: aborting pru with shutdown=true
[1970-Jan-01 00:19:35.666393]: Last sync period had (0,0,39252) buffer fulls due to suspend moves
[1970-Jan-01 00:19:35.668141]: Libstepper All Axis Abort
[1970-Jan-01 00:20:19.348067]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 00:20:19.349983]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 00:20:20.713415]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 00:20:22.774518]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:20:26.206574]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:20:29.545470]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:20:33.488325]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:20:36.876838]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:20:40.268953]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:20:44.057114]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:20:47.559449]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:20:51.024199]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:20:54.826756]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:20:57.889402]:  wait for axis 0 full: false offset: 90 l3map offset:    90 status: 1 position 0 status count 1001
[1970-Jan-01 00:20:58.315844]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:21:01.704807]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:21:05.174230]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:21:08.936606]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:21:13.823977]: Raw HES proceeding
[1970-Jan-01 00:21:13.870512]: Got raw val 24041, saturated: true
[1970-Jan-01 00:21:13.894983]: Returning HES
[1970-Jan-01 00:21:13.896666]: Sending back val 24041, saturated true
[1970-Jan-01 00:21:14.035029]: Toolhead Abort
[1970-Jan-01 00:21:14.036769]: aborting pru with shutdown=true
[1970-Jan-01 00:21:14.050846]: Last sync period had (0,0,44058) buffer fulls due to suspend moves
[1970-Jan-01 00:21:14.052606]: Libstepper All Axis Abort
[1970-Jan-01 00:22:25.688906]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 00:22:25.721130]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 00:22:27.096249]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 00:22:28.507791]: Steps overrun! last 55360 and just got 679
[1970-Jan-01 00:22:28.509481]: calculated 10854
[1970-Jan-01 00:22:28.935151]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:22:32.371967]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:22:35.697881]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:22:39.521258]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:22:42.926605]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:22:46.254133]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:22:49.952417]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:22:53.355124]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:22:56.973221]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:23:00.862684]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:23:04.026027]:  wait for axis 0 full: false offset: 90 l3map offset:    90 status: 1 position 0 status count 1001
[1970-Jan-01 00:23:04.246663]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:23:07.815428]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:23:11.605907]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:23:14.959401]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:23:18.329332]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:23:20.172778]: Raw HES proceeding
[1970-Jan-01 00:23:20.212693]: Got raw val 24035, saturated: true
[1970-Jan-01 00:23:20.236981]: Returning HES
[1970-Jan-01 00:23:20.238641]: Sending back val 24035, saturated true
[1970-Jan-01 00:23:20.387643]: Toolhead Abort
[1970-Jan-01 00:23:20.389383]: aborting pru with shutdown=true
[1970-Jan-01 00:23:20.402817]: Last sync period had (0,0,49056) buffer fulls due to suspend moves
[1970-Jan-01 00:23:20.404579]: Libstepper All Axis Abort
[1970-Jan-01 00:23:48.959977]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 00:23:48.992736]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 00:23:53.252773]: GetCachedToolUsageStats called
[1970-Jan-01 00:23:53.364642]: GetCachedToolUsageStats called
[1970-Jan-01 00:23:53.892328]: GetCachedToolUsageStats called
[1970-Jan-01 00:23:55.391637]: GetCachedToolUsageStats called
[1970-Jan-01 00:23:57.006366]: GetCachedToolUsageStats called
[1970-Jan-01 01:16:12.372510]: GetCachedToolUsageStats called
[1970-Jan-01 01:25:42.178461]: GetCachedToolUsageStats called
[1970-Jan-01 01:25:42.613143]: GetCachedToolUsageStats called
[1970-Jan-01 01:25:42.839360]: GetCachedToolUsageStats called
[1970-Jan-01 01:25:43.661747]: GetCachedToolUsageStats called
[1970-Jan-01 01:25:45.164032]: GetCachedToolUsageStats called
[1970-Jan-01 01:25:46.648662]: GetCachedToolUsageStats called
[1970-Jan-01 01:25:48.152211]: GetCachedToolUsageStats called
[1970-Jan-01 01:25:54.922374]: Heater manager Set Target Temperature to 180, index 0
[1970-Jan-01 01:25:54.924120]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:26:06.177868]: GetCachedToolUsageStats called
[1970-Jan-01 01:26:21.640826]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 01:26:21.642685]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:26:21.723323]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:28:46.435766]: GetCachedToolUsageStats called
[1970-Jan-01 01:29:01.481904]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:31:03.896009]: Toolhead 0 state error: 80
[1970-Jan-01 01:42:43.209994]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false
[1970-Jan-01 01:42:43.213329]: Load Sense Limit Method: 1
[1970-Jan-01 01:42:43.215902]: Last sync period had (0,0,170916) buffer fulls due to suspend moves
[1970-Jan-01 01:42:43.217632]: Libstepper All Axis Abort
[1970-Jan-01 01:42:43.975535]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 01:42:43.977333]: Toolhead Abort
[1970-Jan-01 01:42:43.979073]: aborting pru with shutdown=true
[1970-Jan-01 01:42:43.983153]: Last sync period had (0,0,170955) buffer fulls due to suspend moves
[1970-Jan-01 01:42:43.984884]: Libstepper All Axis Abort
[1970-Jan-01 01:42:44.016347]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 01:42:44.050651]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 01:42:44.088338]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 01:42:45.677895]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:42:46.128453]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false
[1970-Jan-01 01:42:46.140821]: Load Sense Limit Method: 0
[1970-Jan-01 01:42:46.150859]: Last sync period had (0,0,171081) buffer fulls due to suspend moves
[1970-Jan-01 01:42:46.152744]: Libstepper All Axis Abort
[1970-Jan-01 01:42:46.916421]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 01:42:46.918257]: Toolhead Abort
[1970-Jan-01 01:42:46.920477]: aborting pru with shutdown=true
[1970-Jan-01 01:42:46.923081]: Last sync period had (0,0,171126) buffer fulls due to suspend moves
[1970-Jan-01 01:42:46.925871]: Libstepper All Axis Abort
[1970-Jan-01 01:42:46.953026]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 01:42:47.003407]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 01:42:47.032242]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 01:42:47.650861]: Heater manager Set Target Temperature to 180, index 0
[1970-Jan-01 01:42:47.652608]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:42:47.800772]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:42:48.657446]: bronx lowest mem space: 0x34e bytes
[1970-Jan-01 01:43:56.579546]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:43:57.180599]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false
[1970-Jan-01 01:44:01.588085]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:44:05.154460]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:44:08.708010]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:44:12.882561]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:44:15.837442]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-01 01:44:15.839251]: Toolhead Abort
[1970-Jan-01 01:44:15.841336]: aborting pru with shutdown=false
[1970-Jan-01 01:44:15.843867]: Last sync period had (0,0,178485) buffer fulls due to suspend moves
[1970-Jan-01 01:44:15.849776]: Libstepper All Axis Abort
[1970-Jan-01 01:44:15.927273]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-01 01:44:16.086978]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-01 01:44:16.198678]: HES logged: false
[1970-Jan-01 01:44:16.232608]: HES logged: false
[1970-Jan-01 01:44:16.269226]: HES logged: false
[1970-Jan-01 01:44:16.308086]: HES logged: false
[1970-Jan-01 01:44:16.334495]: HES logged: false
[1970-Jan-01 01:44:16.425239]: HES logged: false
[1970-Jan-01 01:44:16.456086]: HES logged: false
[1970-Jan-01 01:44:16.483364]: HES logged: false
[1970-Jan-01 01:44:16.514277]: HES logged: false
[1970-Jan-01 01:44:16.558822]: HES logged: false
[1970-Jan-01 01:44:16.586020]: HES logged: false
[1970-Jan-01 01:44:16.612521]: HES logged: false
[1970-Jan-01 01:44:16.643428]: HES logged: false
[1970-Jan-01 01:44:16.691027]: HES logged: false
[1970-Jan-01 01:44:16.721360]: HES logged: false
[1970-Jan-01 01:44:16.775146]: HES logged: false
[1970-Jan-01 01:44:16.817107]: HES logged: false
[1970-Jan-01 01:44:16.843998]: HES logged: false
[1970-Jan-01 01:44:16.914724]: HES logged: false
[1970-Jan-01 01:44:16.976973]: HES logged: false
[1970-Jan-01 01:44:17.017056]: HES logged: false
[1970-Jan-01 01:44:17.044116]: HES logged: false
[1970-Jan-01 01:44:17.070920]: HES logged: false
[1970-Jan-01 01:44:17.107707]: HES logged: false
[1970-Jan-01 01:44:17.145165]: HES logged: false
[1970-Jan-01 01:44:17.176085]: HES logged: false
[1970-Jan-01 01:44:17.202032]: HES logged: false
[1970-Jan-01 01:44:17.239238]: HES logged: false
[1970-Jan-01 01:44:17.276325]: HES logged: false
[1970-Jan-01 01:44:17.322811]: HES logged: false
[1970-Jan-01 01:44:17.353017]: HES logged: false
[1970-Jan-01 01:44:17.396025]: HES logged: false
[1970-Jan-01 01:44:17.423362]: HES logged: false
[1970-Jan-01 01:44:17.448201]: HES logged: false
[1970-Jan-01 01:44:17.479615]: HES logged: false
[1970-Jan-01 01:44:17.524960]: HES logged: false
[1970-Jan-01 01:44:17.551610]: HES logged: false
[1970-Jan-01 01:44:17.583015]: HES logged: false
[1970-Jan-01 01:44:17.614787]: HES logged: false
[1970-Jan-01 01:44:17.662500]: HES logged: false
[1970-Jan-01 01:44:17.688649]: HES logged: false
[1970-Jan-01 01:44:17.715511]: HES logged: false
[1970-Jan-01 01:44:17.743686]: HES logged: false
[1970-Jan-01 01:44:17.788982]: HES logged: false
[1970-Jan-01 01:44:17.815650]: HES logged: false
[1970-Jan-01 01:44:17.861819]: HES logged: false
[1970-Jan-01 01:44:17.911663]: HES logged: false
[1970-Jan-01 01:44:17.937603]: HES logged: false
[1970-Jan-01 01:44:17.965309]: HES logged: false
[1970-Jan-01 01:44:17.991281]: HES logged: false
[1970-Jan-01 01:44:18.029349]: HES logged: false
[1970-Jan-01 01:44:18.066263]: HES logged: false
[1970-Jan-01 01:44:18.097517]: HES logged: false
[1970-Jan-01 01:44:18.127484]: HES logged: false
[1970-Jan-01 01:44:18.174089]: HES logged: false
[1970-Jan-01 01:44:18.201532]: HES logged: false
[1970-Jan-01 01:44:18.227444]: HES logged: false
[1970-Jan-01 01:44:18.255494]: HES logged: false
[1970-Jan-01 01:44:18.301658]: HES logged: false
[1970-Jan-01 01:44:18.329856]: HES logged: false
[1970-Jan-01 01:44:18.356930]: HES logged: false
[1970-Jan-01 01:44:18.417680]: HES logged: false
[1970-Jan-01 01:44:18.494330]: HES logged: false
[1970-Jan-01 01:44:18.558613]: HES logged: false
[1970-Jan-01 01:44:18.601629]: HES logged: false
[1970-Jan-01 01:44:18.627510]: HES logged: false
[1970-Jan-01 01:44:18.663256]: HES logged: false
[1970-Jan-01 01:44:18.703621]: HES logged: false
[1970-Jan-01 01:44:18.732257]: HES logged: false
[1970-Jan-01 01:44:18.758626]: HES logged: false
[1970-Jan-01 01:44:18.786031]: HES logged: false
[1970-Jan-01 01:44:18.834982]: HES logged: false
[1970-Jan-01 01:44:18.862893]: HES logged: false
[1970-Jan-01 01:44:18.887802]: HES logged: false
[1970-Jan-01 01:44:18.952127]: HES logged: false
[1970-Jan-01 01:44:18.983461]: HES logged: false
[1970-Jan-01 01:44:19.014120]: HES logged: false
[1970-Jan-01 01:44:19.041147]: HES logged: false
[1970-Jan-01 01:44:19.082456]: HES logged: false
[1970-Jan-01 01:44:19.113857]: HES logged: false
[1970-Jan-01 01:44:19.140634]: HES logged: false
[1970-Jan-01 01:44:19.166643]: HES logged: false
[1970-Jan-01 01:44:19.211900]: HES logged: false
[1970-Jan-01 01:44:19.246641]: HES logged: false
[1970-Jan-01 01:44:19.272508]: HES logged: false
[1970-Jan-01 01:44:19.299267]: HES logged: false
[1970-Jan-01 01:44:19.340427]: HES logged: false
[1970-Jan-01 01:44:19.375046]: HES logged: false
[1970-Jan-01 01:44:19.400399]: HES logged: false
[1970-Jan-01 01:44:19.427710]: HES logged: false
[1970-Jan-01 01:44:19.496071]: HES logged: false
[1970-Jan-01 01:44:19.527456]: HES logged: false
[1970-Jan-01 01:44:19.553924]: HES logged: false
[1970-Jan-01 01:44:19.584805]: HES logged: false
[1970-Jan-01 01:44:19.628931]: HES logged: true
[1970-Jan-01 01:44:19.680643]: GAP: Query->Await
[1970-Jan-01 01:44:19.706155]: GAP: Await
[1970-Jan-01 01:44:19.758815]: GAP: Await
[1970-Jan-01 01:44:19.788279]: GAP: Await
[1970-Jan-01 01:44:19.813492]: GAP: Await
[1970-Jan-01 01:44:19.826702]: TH0: Retreived step position 11600143
[1970-Jan-01 01:44:19.847222]: wait for PRU status in get position
[1970-Jan-01 01:44:19.848877]: wait for PRU status in get position
[1970-Jan-01 01:44:19.852530]: GAP: Await->Done(Query)
[1970-Jan-01 01:44:20.809452]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:44:21.069975]: Changing HES sample rate. Commanded: 215Hz; clamped to 215Hz (215/1)
[1970-Jan-01 01:56:16.572227]: Moving down
[1970-Jan-01 01:56:16.624628]: loaded move
[1970-Jan-01 01:56:20.668939]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:56:24.236230]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:56:26.830436]: Last sync period had (0,0,242901) buffer fulls due to suspend moves
[1970-Jan-01 01:56:26.832142]: Libstepper All Axis Abort
[1970-Jan-01 01:56:26.834623]: Last sync period had (0,0,242901) buffer fulls due to suspend moves
[1970-Jan-01 01:56:26.836308]: Libstepper All Axis Abort
[1970-Jan-01 01:56:26.838111]: GAP: Query->Await
[1970-Jan-01 01:56:26.844540]: Hit the build plate, stopping
[1970-Jan-01 01:56:26.935213]: TH0: Retreived step position 11731215
[1970-Jan-01 01:56:27.832555]: libstepper: true toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:56:31.665642]: libstepper: true toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:56:35.598078]: libstepper: true toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:56:38.759710]: HES logged: false
[1970-Jan-01 01:56:38.792121]: HES logged: false
[1970-Jan-01 01:56:38.830910]: HES logged: false
[1970-Jan-01 01:56:38.890197]: HES logged: false
[1970-Jan-01 01:56:38.916045]: HES logged: false
[1970-Jan-01 01:56:38.944155]: HES logged: false
[1970-Jan-01 01:56:38.994808]: HES logged: false
[1970-Jan-01 01:56:39.022260]: HES logged: false
[1970-Jan-01 01:56:39.050337]: HES logged: false
[1970-Jan-01 01:56:39.077906]: HES logged: false
[1970-Jan-01 01:56:39.128051]: HES logged: false
[1970-Jan-01 01:56:39.162132]: HES logged: false
[1970-Jan-01 01:56:39.189536]: HES logged: false
[1970-Jan-01 01:56:39.225643]: HES logged: false
[1970-Jan-01 01:56:39.271010]: HES logged: false
[1970-Jan-01 01:56:39.299704]: HES logged: false
[1970-Jan-01 01:56:39.332400]: HES logged: false
[1970-Jan-01 01:56:39.377578]: HES logged: false
[1970-Jan-01 01:56:39.433610]: HES logged: false
[1970-Jan-01 01:56:39.461119]: HES logged: false
[1970-Jan-01 01:56:39.507673]: HES logged: false
[1970-Jan-01 01:56:39.542219]: HES logged: false
[1970-Jan-01 01:56:39.569552]: HES logged: false
[1970-Jan-01 01:56:39.597758]: HES logged: true
[1970-Jan-01 01:56:41.424279]: HES logged: false
[1970-Jan-01 01:56:41.471345]: HES logged: false
[1970-Jan-01 01:56:41.504707]: HES logged: false
[1970-Jan-01 01:56:41.534619]: HES logged: false
[1970-Jan-01 01:56:41.560714]: HES logged: false
[1970-Jan-01 01:56:41.612383]: HES logged: false
[1970-Jan-01 01:56:41.640891]: HES logged: false
[1970-Jan-01 01:56:41.671073]: HES logged: false
[1970-Jan-01 01:56:41.738043]: HES logged: false
[1970-Jan-01 01:56:41.769436]: HES logged: false
[1970-Jan-01 01:56:41.795907]: HES logged: false
[1970-Jan-01 01:56:41.825120]: HES logged: false
[1970-Jan-01 01:56:41.879778]: HES logged: false
[1970-Jan-01 01:56:41.907203]: HES logged: false
[1970-Jan-01 01:56:41.935748]: HES logged: false
[1970-Jan-01 01:56:41.973997]: HES logged: false
[1970-Jan-01 01:56:42.016682]: HES logged: false
[1970-Jan-01 01:56:42.044328]: HES logged: false
[1970-Jan-01 01:56:42.070247]: HES logged: false
[1970-Jan-01 01:56:42.102501]: HES logged: false
[1970-Jan-01 01:56:42.155716]: HES logged: false
[1970-Jan-01 01:56:42.181832]: HES logged: false
[1970-Jan-01 01:56:42.217904]: HES logged: false
[1970-Jan-01 01:56:42.298622]: HES logged: false
[1970-Jan-01 01:56:42.326899]: HES logged: false
[1970-Jan-01 01:56:42.355323]: HES logged: true
[1970-Jan-01 01:56:44.128210]: HES logged: false
[1970-Jan-01 01:56:44.156315]: HES logged: false
[1970-Jan-01 01:56:44.183417]: HES logged: false
[1970-Jan-01 01:56:44.217705]: HES logged: false
[1970-Jan-01 01:56:44.265407]: HES logged: false
[1970-Jan-01 01:56:44.296517]: HES logged: false
[1970-Jan-01 01:56:44.386400]: HES logged: false
[1970-Jan-01 01:56:44.439231]: HES logged: false
[1970-Jan-01 01:56:44.473096]: HES logged: false
[1970-Jan-01 01:56:44.523575]: HES logged: false
[1970-Jan-01 01:56:44.568636]: HES logged: false
[1970-Jan-01 01:56:44.599725]: HES logged: false
[1970-Jan-01 01:56:44.629261]: HES logged: false
[1970-Jan-01 01:56:44.655887]: HES logged: false
[1970-Jan-01 01:56:44.700265]: HES logged: false
[1970-Jan-01 01:56:44.734011]: HES logged: false
[1970-Jan-01 01:56:44.759802]: HES logged: false
[1970-Jan-01 01:56:44.793837]: HES logged: false
[1970-Jan-01 01:56:44.839635]: HES logged: false
[1970-Jan-01 01:56:44.869842]: HES logged: false
[1970-Jan-01 01:56:44.900729]: HES logged: false
[1970-Jan-01 01:56:44.929045]: HES logged: false
[1970-Jan-01 01:56:44.972689]: HES logged: false
[1970-Jan-01 01:56:45.004366]: HES logged: false
[1970-Jan-01 01:56:45.052624]: HES logged: true
[1970-Jan-01 01:56:46.760745]: HES logged: false
[1970-Jan-01 01:56:46.805386]: HES logged: false
[1970-Jan-01 01:56:46.834221]: HES logged: false
[1970-Jan-01 01:56:46.861438]: HES logged: false
[1970-Jan-01 01:56:46.892985]: HES logged: false
[1970-Jan-01 01:56:46.942359]: HES logged: false
[1970-Jan-01 01:56:46.968281]: HES logged: false
[1970-Jan-01 01:56:46.995193]: HES logged: false
[1970-Jan-01 01:56:47.031136]: HES logged: false
[1970-Jan-01 01:56:47.073906]: HES logged: false
[1970-Jan-01 01:56:47.105967]: HES logged: false
[1970-Jan-01 01:56:47.135638]: HES logged: false
[1970-Jan-01 01:56:47.176547]: HES logged: false
[1970-Jan-01 01:56:47.236741]: HES logged: false
[1970-Jan-01 01:56:47.264703]: HES logged: false
[1970-Jan-01 01:56:47.303524]: HES logged: false
[1970-Jan-01 01:56:47.347704]: HES logged: false
[1970-Jan-01 01:56:47.374074]: HES logged: false
[1970-Jan-01 01:56:47.444999]: HES logged: false
[1970-Jan-01 01:56:47.518056]: HES logged: false
[1970-Jan-01 01:56:47.549568]: HES logged: false
[1970-Jan-01 01:56:47.578274]: HES logged: false
[1970-Jan-01 01:56:47.607012]: HES logged: false
[1970-Jan-01 01:56:47.656307]: HES logged: false
[1970-Jan-01 01:56:47.688058]: HES logged: false
[1970-Jan-01 01:56:47.722104]: HES logged: true
[1970-Jan-01 01:56:48.698567]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:56:52.416445]: HES logged: false
[1970-Jan-01 01:56:52.444638]: HES logged: false
[1970-Jan-01 01:56:52.494703]: HES logged: false
[1970-Jan-01 01:56:52.548188]: HES logged: false
[1970-Jan-01 01:56:52.574786]: HES logged: false
[1970-Jan-01 01:56:52.623602]: HES logged: false
[1970-Jan-01 01:56:52.660763]: HES logged: false
[1970-Jan-01 01:56:52.687739]: HES logged: false
[1970-Jan-01 01:56:52.714302]: HES logged: false
[1970-Jan-01 01:56:52.759427]: HES logged: false
[1970-Jan-01 01:56:52.793528]: HES logged: false
[1970-Jan-01 01:56:52.821506]: HES logged: false
[1970-Jan-01 01:56:52.862229]: HES logged: false
[1970-Jan-01 01:56:52.899335]: HES logged: false
[1970-Jan-01 01:56:52.927758]: HES logged: false
[1970-Jan-01 01:56:52.956688]: HES logged: false
[1970-Jan-01 01:56:52.995101]: HES logged: false
[1970-Jan-01 01:56:53.042514]: HES logged: false
[1970-Jan-01 01:56:53.090646]: HES logged: false
[1970-Jan-01 01:56:53.127195]: HES logged: false
[1970-Jan-01 01:56:53.166558]: HES logged: false
[1970-Jan-01 01:56:53.194090]: HES logged: false
[1970-Jan-01 01:56:53.222168]: HES logged: false
[1970-Jan-01 01:56:53.269488]: HES logged: true
[1970-Jan-01 01:56:53.801419]: HES logged: false
[1970-Jan-01 01:56:53.829536]: HES logged: false
[1970-Jan-01 01:56:53.860846]: HES logged: false
[1970-Jan-01 01:56:53.892713]: HES logged: false
[1970-Jan-01 01:56:53.937173]: HES logged: false
[1970-Jan-01 01:56:53.963417]: HES logged: false
[1970-Jan-01 01:56:53.990731]: HES logged: false
[1970-Jan-01 01:56:54.023269]: HES logged: false
[1970-Jan-01 01:56:54.067475]: HES logged: false
[1970-Jan-01 01:56:54.095602]: HES logged: false
[1970-Jan-01 01:56:54.127723]: HES logged: false
[1970-Jan-01 01:56:54.197221]: HES logged: false
[1970-Jan-01 01:56:54.225580]: HES logged: false
[1970-Jan-01 01:56:54.258094]: HES logged: false
[1970-Jan-01 01:56:54.290798]: HES logged: false
[1970-Jan-01 01:56:54.335365]: HES logged: false
[1970-Jan-01 01:56:54.362213]: HES logged: false
[1970-Jan-01 01:56:54.389343]: HES logged: false
[1970-Jan-01 01:56:54.421776]: HES logged: false
[1970-Jan-01 01:56:54.465240]: HES logged: false
[1970-Jan-01 01:56:54.493271]: HES logged: false
[1970-Jan-01 01:56:54.521849]: HES logged: false
[1970-Jan-01 01:56:54.553527]: HES logged: false
[1970-Jan-01 01:56:54.597250]: HES logged: false
[1970-Jan-01 01:56:54.626678]: HES logged: false
[1970-Jan-01 01:56:54.663080]: HES logged: false
[1970-Jan-01 01:56:54.732299]: HES logged: true
[1970-Jan-01 01:56:55.325784]: HES logged: false
[1970-Jan-01 01:56:55.361836]: HES logged: false
[1970-Jan-01 01:56:55.389540]: HES logged: false
[1970-Jan-01 01:56:55.417100]: HES logged: false
[1970-Jan-01 01:56:55.463005]: HES logged: false
[1970-Jan-01 01:56:55.498743]: HES logged: false
[1970-Jan-01 01:56:55.528185]: HES logged: false
[1970-Jan-01 01:56:55.555919]: HES logged: false
[1970-Jan-01 01:56:55.603981]: HES logged: false
[1970-Jan-01 01:56:55.633363]: HES logged: false
[1970-Jan-01 01:56:55.661317]: HES logged: false
[1970-Jan-01 01:56:55.689181]: HES logged: false
[1970-Jan-01 01:56:55.737293]: HES logged: false
[1970-Jan-01 01:56:55.770677]: HES logged: false
[1970-Jan-01 01:56:55.819126]: HES logged: false
[1970-Jan-01 01:56:55.871162]: HES logged: false
[1970-Jan-01 01:56:55.902878]: HES logged: false
[1970-Jan-01 01:56:55.932211]: HES logged: false
[1970-Jan-01 01:56:55.971534]: HES logged: false
[1970-Jan-01 01:56:56.007611]: HES logged: false
[1970-Jan-01 01:56:56.034476]: HES logged: false
[1970-Jan-01 01:56:56.063183]: HES logged: false
[1970-Jan-01 01:56:56.098334]: HES logged: false
[1970-Jan-01 01:56:56.141719]: HES logged: false
[1970-Jan-01 01:56:56.169739]: HES logged: false
[1970-Jan-01 01:56:56.204590]: HES logged: false
[1970-Jan-01 01:56:56.245832]: HES logged: false
[1970-Jan-01 01:56:56.282829]: HES logged: true
[1970-Jan-01 01:56:56.943917]: HES logged: false
[1970-Jan-01 01:56:56.970436]: HES logged: false
[1970-Jan-01 01:56:56.997587]: HES logged: false
[1970-Jan-01 01:56:57.048804]: HES logged: false
[1970-Jan-01 01:56:57.076795]: HES logged: false
[1970-Jan-01 01:56:57.103440]: HES logged: false
[1970-Jan-01 01:56:57.141889]: HES logged: false
[1970-Jan-01 01:56:57.183968]: HES logged: false
[1970-Jan-01 01:56:57.210621]: HES logged: false
[1970-Jan-01 01:56:57.237942]: HES logged: false
[1970-Jan-01 01:56:57.265058]: HES logged: false
[1970-Jan-01 01:56:57.314733]: HES logged: false
[1970-Jan-01 01:56:57.343845]: HES logged: false
[1970-Jan-01 01:56:57.371034]: HES logged: false
[1970-Jan-01 01:56:57.403439]: HES logged: false
[1970-Jan-01 01:56:57.454443]: HES logged: false
[1970-Jan-01 01:56:57.506797]: HES logged: false
[1970-Jan-01 01:56:57.534464]: HES logged: false
[1970-Jan-01 01:56:57.584013]: HES logged: false
[1970-Jan-01 01:56:57.610367]: HES logged: false
[1970-Jan-01 01:56:57.638980]: HES logged: false
[1970-Jan-01 01:56:57.664554]: HES logged: false
[1970-Jan-01 01:56:57.708969]: HES logged: false
[1970-Jan-01 01:56:57.741866]: HES logged: false
[1970-Jan-01 01:56:57.768322]: HES logged: false
[1970-Jan-01 01:56:57.795579]: HES logged: false
[1970-Jan-01 01:56:57.848527]: HES logged: true
[1970-Jan-01 01:57:05.228336]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:57:06.705397]: HES logged: false
[1970-Jan-01 01:57:06.733402]: HES logged: false
[1970-Jan-01 01:57:06.759627]: HES logged: false
[1970-Jan-01 01:57:06.802065]: HES logged: false
[1970-Jan-01 01:57:06.843730]: HES logged: false
[1970-Jan-01 01:57:06.891527]: HES logged: false
[1970-Jan-01 01:57:06.935930]: HES logged: false
[1970-Jan-01 01:57:06.972661]: HES logged: false
[1970-Jan-01 01:57:06.999646]: HES logged: false
[1970-Jan-01 01:57:07.030552]: HES logged: false
[1970-Jan-01 01:57:07.063892]: HES logged: false
[1970-Jan-01 01:57:07.102819]: HES logged: false
[1970-Jan-01 01:57:07.130800]: HES logged: false
[1970-Jan-01 01:57:07.157102]: HES logged: false
[1970-Jan-01 01:57:07.194085]: HES logged: false
[1970-Jan-01 01:57:07.235103]: HES logged: false
[1970-Jan-01 01:57:07.262777]: HES logged: false
[1970-Jan-01 01:57:07.295901]: HES logged: false
[1970-Jan-01 01:57:07.341529]: HES logged: false
[1970-Jan-01 01:57:07.377291]: HES logged: false
[1970-Jan-01 01:57:07.429224]: HES logged: false
[1970-Jan-01 01:57:07.454985]: HES logged: false
[1970-Jan-01 01:57:07.499706]: HES logged: false
[1970-Jan-01 01:57:07.527731]: HES logged: false
[1970-Jan-01 01:57:07.557969]: HES logged: false
[1970-Jan-01 01:57:07.585957]: HES logged: false
[1970-Jan-01 01:57:07.632247]: HES logged: true
[1970-Jan-01 01:57:08.075037]: HES logged: false
[1970-Jan-01 01:57:08.106730]: HES logged: false
[1970-Jan-01 01:57:08.154914]: HES logged: false
[1970-Jan-01 01:57:08.182353]: HES logged: false
[1970-Jan-01 01:57:08.209523]: HES logged: false
[1970-Jan-01 01:57:08.241447]: HES logged: false
[1970-Jan-01 01:57:08.289118]: HES logged: false
[1970-Jan-01 01:57:08.316957]: HES logged: false
[1970-Jan-01 01:57:08.346067]: HES logged: false
[1970-Jan-01 01:57:08.398118]: HES logged: false
[1970-Jan-01 01:57:08.433080]: HES logged: false
[1970-Jan-01 01:57:08.464065]: HES logged: false
[1970-Jan-01 01:57:08.526118]: HES logged: false
[1970-Jan-01 01:57:08.565223]: HES logged: false
[1970-Jan-01 01:57:08.593074]: HES logged: false
[1970-Jan-01 01:57:08.624494]: HES logged: false
[1970-Jan-01 01:57:08.658357]: HES logged: false
[1970-Jan-01 01:57:08.695803]: HES logged: false
[1970-Jan-01 01:57:08.726801]: HES logged: false
[1970-Jan-01 01:57:08.757690]: HES logged: false
[1970-Jan-01 01:57:08.801595]: HES logged: false
[1970-Jan-01 01:57:08.832578]: HES logged: false
[1970-Jan-01 01:57:08.858916]: HES logged: false
[1970-Jan-01 01:57:08.891507]: HES logged: false
[1970-Jan-01 01:57:08.933111]: HES logged: false
[1970-Jan-01 01:57:08.967305]: HES logged: false
[1970-Jan-01 01:57:08.999791]: HES logged: false
[1970-Jan-01 01:57:09.066347]: HES logged: true
[1970-Jan-01 01:57:09.723731]: HES logged: false
[1970-Jan-01 01:57:09.774656]: HES logged: false
[1970-Jan-01 01:57:09.807819]: HES logged: false
[1970-Jan-01 01:57:09.835107]: HES logged: false
[1970-Jan-01 01:57:09.866006]: HES logged: false
[1970-Jan-01 01:57:09.892934]: HES logged: false
[1970-Jan-01 01:57:09.919511]: HES logged: false
[1970-Jan-01 01:57:09.946687]: HES logged: false
[1970-Jan-01 01:57:09.974422]: HES logged: false
[1970-Jan-01 01:57:10.025660]: HES logged: false
[1970-Jan-01 01:57:10.056569]: HES logged: false
[1970-Jan-01 01:57:10.088479]: HES logged: false
[1970-Jan-01 01:57:10.117447]: HES logged: false
[1970-Jan-01 01:57:10.167062]: HES logged: false
[1970-Jan-01 01:57:10.197950]: HES logged: false
[1970-Jan-01 01:57:10.225758]: HES logged: false
[1970-Jan-01 01:57:10.268280]: HES logged: false
[1970-Jan-01 01:57:10.306027]: HES logged: false
[1970-Jan-01 01:57:10.334194]: HES logged: false
[1970-Jan-01 01:57:10.362400]: HES logged: false
[1970-Jan-01 01:57:10.388794]: HES logged: false
[1970-Jan-01 01:57:10.421550]: HES logged: false
[1970-Jan-01 01:57:10.449451]: HES logged: false
[1970-Jan-01 01:57:10.476250]: HES logged: false
[1970-Jan-01 01:57:10.518553]: HES logged: false
[1970-Jan-01 01:57:10.569043]: HES logged: false
[1970-Jan-01 01:57:10.600000]: HES logged: false
[1970-Jan-01 01:57:10.631859]: HES logged: false
[1970-Jan-01 01:57:10.658864]: HES logged: true
[1970-Jan-01 01:57:11.316954]: HES logged: false
[1970-Jan-01 01:57:11.346329]: HES logged: false
[1970-Jan-01 01:57:11.381940]: HES logged: false
[1970-Jan-01 01:57:11.415051]: HES logged: false
[1970-Jan-01 01:57:11.441069]: HES logged: false
[1970-Jan-01 01:57:11.467463]: HES logged: false
[1970-Jan-01 01:57:11.499564]: HES logged: false
[1970-Jan-01 01:57:11.526724]: HES logged: false
[1970-Jan-01 01:57:11.575218]: HES logged: false
[1970-Jan-01 01:57:11.618893]: HES logged: false
[1970-Jan-01 01:57:11.645537]: HES logged: false
[1970-Jan-01 01:57:11.672936]: HES logged: false
[1970-Jan-01 01:57:11.705202]: HES logged: false
[1970-Jan-01 01:57:11.735274]: HES logged: false
[1970-Jan-01 01:57:11.766719]: HES logged: false
[1970-Jan-01 01:57:11.811310]: HES logged: false
[1970-Jan-01 01:57:11.870295]: HES logged: false
[1970-Jan-01 01:57:11.901763]: HES logged: false
[1970-Jan-01 01:57:11.928461]: HES logged: false
[1970-Jan-01 01:57:11.955089]: HES logged: false
[1970-Jan-01 01:57:11.983033]: HES logged: false
[1970-Jan-01 01:57:12.012883]: HES logged: false
[1970-Jan-01 01:57:12.046043]: HES logged: false
[1970-Jan-01 01:57:12.093428]: HES logged: false
[1970-Jan-01 01:57:12.121111]: HES logged: false
[1970-Jan-01 01:57:12.152940]: HES logged: false
[1970-Jan-01 01:57:12.181554]: HES logged: true
[1970-Jan-01 01:57:12.753908]: HES logged: false
[1970-Jan-01 01:57:12.790233]: HES logged: false
[1970-Jan-01 01:57:12.817704]: HES logged: false
[1970-Jan-01 01:57:12.854785]: HES logged: false
[1970-Jan-01 01:57:12.898241]: HES logged: false
[1970-Jan-01 01:57:12.930800]: HES logged: false
[1970-Jan-01 01:57:12.980797]: HES logged: false
[1970-Jan-01 01:57:13.006838]: HES logged: false
[1970-Jan-01 01:57:13.043004]: HES logged: false
[1970-Jan-01 01:57:13.074647]: HES logged: false
[1970-Jan-01 01:57:13.108039]: HES logged: false
[1970-Jan-01 01:57:13.149847]: HES logged: false
[1970-Jan-01 01:57:13.182359]: HES logged: false
[1970-Jan-01 01:57:13.208489]: HES logged: false
[1970-Jan-01 01:57:13.236775]: HES logged: false
[1970-Jan-01 01:57:13.265613]: HES logged: false
[1970-Jan-01 01:57:13.292509]: HES logged: false
[1970-Jan-01 01:57:13.328752]: HES logged: false
[1970-Jan-01 01:57:13.373042]: HES logged: false
[1970-Jan-01 01:57:13.408394]: HES logged: false
[1970-Jan-01 01:57:13.436696]: HES logged: false
[1970-Jan-01 01:57:13.477295]: HES logged: false
[1970-Jan-01 01:57:13.530927]: HES logged: false
[1970-Jan-01 01:57:13.558012]: HES logged: false
[1970-Jan-01 01:57:13.588206]: HES logged: false
[1970-Jan-01 01:57:13.635405]: HES logged: false
[1970-Jan-01 01:57:13.676510]: HES logged: true
[1970-Jan-01 01:57:14.398220]: HES logged: false
[1970-Jan-01 01:57:14.425496]: HES logged: false
[1970-Jan-01 01:57:14.457676]: HES logged: false
[1970-Jan-01 01:57:14.510760]: HES logged: false
[1970-Jan-01 01:57:14.546852]: HES logged: false
[1970-Jan-01 01:57:14.574116]: HES logged: false
[1970-Jan-01 01:57:14.602254]: HES logged: false
[1970-Jan-01 01:57:14.628697]: HES logged: false
[1970-Jan-01 01:57:14.666446]: HES logged: false
[1970-Jan-01 01:57:14.713380]: HES logged: false
[1970-Jan-01 01:57:14.765502]: HES logged: false
[1970-Jan-01 01:57:14.810881]: HES logged: false
[1970-Jan-01 01:57:14.839178]: HES logged: false
[1970-Jan-01 01:57:14.865908]: HES logged: false
[1970-Jan-01 01:57:14.894189]: HES logged: false
[1970-Jan-01 01:57:14.925447]: HES logged: false
[1970-Jan-01 01:57:14.952987]: HES logged: false
[1970-Jan-01 01:57:15.004245]: HES logged: false
[1970-Jan-01 01:57:15.037033]: HES logged: false
[1970-Jan-01 01:57:15.067776]: HES logged: false
[1970-Jan-01 01:57:15.099843]: HES logged: false
[1970-Jan-01 01:57:15.126636]: HES logged: false
[1970-Jan-01 01:57:15.153275]: HES logged: false
[1970-Jan-01 01:57:15.180477]: HES logged: false
[1970-Jan-01 01:57:15.211328]: HES logged: false
[1970-Jan-01 01:57:15.285273]: HES logged: true
[1970-Jan-01 01:57:15.893431]: HES logged: false
[1970-Jan-01 01:57:15.921217]: HES logged: false
[1970-Jan-01 01:57:15.947154]: HES logged: false
[1970-Jan-01 01:57:15.973000]: HES logged: false
[1970-Jan-01 01:57:16.027173]: HES logged: false
[1970-Jan-01 01:57:16.055169]: HES logged: false
[1970-Jan-01 01:57:16.085491]: HES logged: false
[1970-Jan-01 01:57:16.118904]: HES logged: false
[1970-Jan-01 01:57:16.147629]: HES logged: false
[1970-Jan-01 01:57:16.175116]: HES logged: false
[1970-Jan-01 01:57:16.203390]: HES logged: false
[1970-Jan-01 01:57:16.233241]: HES logged: false
[1970-Jan-01 01:57:16.286679]: HES logged: false
[1970-Jan-01 01:57:16.319520]: HES logged: false
[1970-Jan-01 01:57:16.365692]: HES logged: false
[1970-Jan-01 01:57:16.392935]: HES logged: false
[1970-Jan-01 01:57:16.423894]: HES logged: false
[1970-Jan-01 01:57:16.450441]: HES logged: false
[1970-Jan-01 01:57:16.477918]: HES logged: false
[1970-Jan-01 01:57:16.524380]: HES logged: false
[1970-Jan-01 01:57:16.562599]: HES logged: false
[1970-Jan-01 01:57:16.592145]: HES logged: false
[1970-Jan-01 01:57:16.624103]: HES logged: false
[1970-Jan-01 01:57:16.651695]: HES logged: false
[1970-Jan-01 01:57:16.683078]: HES logged: false
[1970-Jan-01 01:57:16.713844]: HES logged: false
[1970-Jan-01 01:57:16.750980]: HES logged: false
[1970-Jan-01 01:57:16.798241]: HES logged: true
[1970-Jan-01 01:57:17.364879]: HES logged: false
[1970-Jan-01 01:57:17.392622]: HES logged: false
[1970-Jan-01 01:57:17.444604]: HES logged: false
[1970-Jan-01 01:57:17.472543]: HES logged: false
[1970-Jan-01 01:57:17.499384]: HES logged: false
[1970-Jan-01 01:57:17.555389]: HES logged: false
[1970-Jan-01 01:57:17.588288]: HES logged: false
[1970-Jan-01 01:57:17.614592]: HES logged: false
[1970-Jan-01 01:57:17.641803]: HES logged: false
[1970-Jan-01 01:57:17.673906]: HES logged: false
[1970-Jan-01 01:57:17.704553]: HES logged: false
[1970-Jan-01 01:57:17.731585]: HES logged: false
[1970-Jan-01 01:57:17.773329]: HES logged: false
[1970-Jan-01 01:57:17.822072]: HES logged: false
[1970-Jan-01 01:57:17.853821]: HES logged: false
[1970-Jan-01 01:57:17.882606]: HES logged: false
[1970-Jan-01 01:57:17.909271]: HES logged: false
[1970-Jan-01 01:57:17.937133]: HES logged: false
[1970-Jan-01 01:57:17.993176]: HES logged: false
[1970-Jan-01 01:57:18.028594]: HES logged: false
[1970-Jan-01 01:57:18.070772]: HES logged: false
[1970-Jan-01 01:57:18.108120]: HES logged: false
[1970-Jan-01 01:57:18.135345]: HES logged: false
[1970-Jan-01 01:57:18.162921]: HES logged: false
[1970-Jan-01 01:57:18.188708]: HES logged: false
[1970-Jan-01 01:57:18.227452]: HES logged: false
[1970-Jan-01 01:57:18.257095]: HES logged: true
[1970-Jan-01 01:57:18.770360]: HES logged: false
[1970-Jan-01 01:57:18.807227]: HES logged: false
[1970-Jan-01 01:57:18.862069]: HES logged: false
[1970-Jan-01 01:57:18.888433]: HES logged: false
[1970-Jan-01 01:57:18.921610]: HES logged: false
[1970-Jan-01 01:57:18.947008]: HES logged: false
[1970-Jan-01 01:57:18.973517]: HES logged: false
[1970-Jan-01 01:57:19.005299]: HES logged: false
[1970-Jan-01 01:57:19.032255]: HES logged: false
[1970-Jan-01 01:57:19.076614]: HES logged: false
[1970-Jan-01 01:57:19.136547]: HES logged: false
[1970-Jan-01 01:57:19.164576]: HES logged: false
[1970-Jan-01 01:57:19.192435]: HES logged: false
[1970-Jan-01 01:57:19.222101]: HES logged: false
[1970-Jan-01 01:57:19.255848]: HES logged: false
[1970-Jan-01 01:57:19.288041]: HES logged: false
[1970-Jan-01 01:57:19.328381]: HES logged: false
[1970-Jan-01 01:57:19.371606]: HES logged: false
[1970-Jan-01 01:57:19.531772]: HES logged: false
[1970-Jan-01 01:57:19.595874]: HES logged: false
[1970-Jan-01 01:57:19.652248]: HES logged: false
[1970-Jan-01 01:57:19.883178]: HES logged: false
[1970-Jan-01 01:57:19.937444]: HES logged: false
[1970-Jan-01 01:57:20.007831]: HES logged: false
[1970-Jan-01 01:57:20.085863]: HES logged: false
[1970-Jan-01 01:57:20.144250]: HES logged: false
[1970-Jan-01 01:57:20.191854]: HES logged: true
[1970-Jan-01 01:57:20.708771]: HES logged: false
[1970-Jan-01 01:57:20.738265]: HES logged: false
[1970-Jan-01 01:57:20.772030]: HES logged: false
[1970-Jan-01 01:57:20.799069]: HES logged: false
[1970-Jan-01 01:57:20.828212]: HES logged: false
[1970-Jan-01 01:57:20.879422]: HES logged: false
[1970-Jan-01 01:57:20.922946]: HES logged: false
[1970-Jan-01 01:57:20.963683]: HES logged: false
[1970-Jan-01 01:57:20.994648]: HES logged: false
[1970-Jan-01 01:57:21.027646]: HES logged: false
[1970-Jan-01 01:57:21.054481]: HES logged: false
[1970-Jan-01 01:57:21.082042]: HES logged: false
[1970-Jan-01 01:57:21.117069]: HES logged: false
[1970-Jan-01 01:57:21.150754]: HES logged: false
[1970-Jan-01 01:57:21.197765]: HES logged: false
[1970-Jan-01 01:57:21.226315]: HES logged: false
[1970-Jan-01 01:57:21.263223]: HES logged: false
[1970-Jan-01 01:57:21.289888]: HES logged: false
[1970-Jan-01 01:57:21.316853]: HES logged: false
[1970-Jan-01 01:57:21.344436]: HES logged: false
[1970-Jan-01 01:57:21.370748]: HES logged: false
[1970-Jan-01 01:57:21.449081]: HES logged: false
[1970-Jan-01 01:57:21.474953]: HES logged: false
[1970-Jan-01 01:57:21.503048]: HES logged: false
[1970-Jan-01 01:57:21.535218]: HES logged: false
[1970-Jan-01 01:57:21.567010]: HES logged: false
[1970-Jan-01 01:57:21.636941]: HES logged: true
[1970-Jan-01 01:57:22.189545]: HES logged: false
[1970-Jan-01 01:57:22.234616]: HES logged: false
[1970-Jan-01 01:57:22.271071]: HES logged: false
[1970-Jan-01 01:57:22.297583]: HES logged: false
[1970-Jan-01 01:57:22.325930]: HES logged: false
[1970-Jan-01 01:57:22.356508]: HES logged: false
[1970-Jan-01 01:57:22.383115]: HES logged: false
[1970-Jan-01 01:57:22.410806]: HES logged: false
[1970-Jan-01 01:57:22.437525]: HES logged: false
[1970-Jan-01 01:57:22.514326]: HES logged: false
[1970-Jan-01 01:57:22.542383]: HES logged: false
[1970-Jan-01 01:57:22.569378]: HES logged: false
[1970-Jan-01 01:57:22.596796]: HES logged: false
[1970-Jan-01 01:57:22.624427]: HES logged: false
[1970-Jan-01 01:57:22.665011]: HES logged: false
[1970-Jan-01 01:57:22.692245]: HES logged: false
[1970-Jan-01 01:57:22.729150]: HES logged: false
[1970-Jan-01 01:57:22.775223]: HES logged: false
[1970-Jan-01 01:57:22.803417]: HES logged: false
[1970-Jan-01 01:57:22.831142]: HES logged: false
[1970-Jan-01 01:57:22.857878]: HES logged: false
[1970-Jan-01 01:57:22.884765]: HES logged: false
[1970-Jan-01 01:57:22.916030]: HES logged: false
[1970-Jan-01 01:57:22.944500]: HES logged: false
[1970-Jan-01 01:57:22.986984]: HES logged: false
[1970-Jan-01 01:57:23.057464]: HES logged: false
[1970-Jan-01 01:57:23.085243]: HES logged: true
[1970-Jan-01 01:57:23.663572]: HES logged: false
[1970-Jan-01 01:57:23.695549]: HES logged: false
[1970-Jan-01 01:57:23.723251]: HES logged: false
[1970-Jan-01 01:57:23.754166]: HES logged: false
[1970-Jan-01 01:57:23.813479]: HES logged: false
[1970-Jan-01 01:57:23.841485]: HES logged: false
[1970-Jan-01 01:57:23.869800]: HES logged: false
[1970-Jan-01 01:57:23.899810]: HES logged: false
[1970-Jan-01 01:57:23.929942]: HES logged: false
[1970-Jan-01 01:57:23.968616]: HES logged: false
[1970-Jan-01 01:57:23.996461]: HES logged: false
[1970-Jan-01 01:57:24.053500]: HES logged: false
[1970-Jan-01 01:57:24.084662]: HES logged: false
[1970-Jan-01 01:57:24.133133]: HES logged: false
[1970-Jan-01 01:57:24.160706]: HES logged: false
[1970-Jan-01 01:57:24.188298]: HES logged: false
[1970-Jan-01 01:57:24.220543]: HES logged: false
[1970-Jan-01 01:57:24.249940]: HES logged: false
[1970-Jan-01 01:57:24.303169]: HES logged: false
[1970-Jan-01 01:57:24.339816]: HES logged: false
[1970-Jan-01 01:57:24.372900]: HES logged: false
[1970-Jan-01 01:57:24.405036]: HES logged: false
[1970-Jan-01 01:57:24.433726]: HES logged: false
[1970-Jan-01 01:57:24.465688]: HES logged: false
[1970-Jan-01 01:57:24.494239]: HES logged: false
[1970-Jan-01 01:57:24.544991]: HES logged: false
[1970-Jan-01 01:57:24.572414]: HES logged: false
[1970-Jan-01 01:57:24.605030]: HES logged: true
[1970-Jan-01 01:57:25.176903]: HES logged: false
[1970-Jan-01 01:57:25.204457]: HES logged: false
[1970-Jan-01 01:57:25.278654]: HES logged: false
[1970-Jan-01 01:57:25.395142]: HES logged: false
[1970-Jan-01 01:57:25.509125]: HES logged: false
[1970-Jan-01 01:57:25.678016]: HES logged: false
[1970-Jan-01 01:57:25.779537]: HES logged: false
[1970-Jan-01 01:57:25.873285]: HES logged: false
[1970-Jan-01 01:57:25.911901]: HES logged: false
[1970-Jan-01 01:57:25.939254]: HES logged: false
[1970-Jan-01 01:57:25.967171]: HES logged: false
[1970-Jan-01 01:57:25.994947]: HES logged: false
[1970-Jan-01 01:57:26.026699]: HES logged: false
[1970-Jan-01 01:57:26.054944]: HES logged: false
[1970-Jan-01 01:57:26.104877]: HES logged: false
[1970-Jan-01 01:57:26.154469]: HES logged: false
[1970-Jan-01 01:57:26.180769]: HES logged: false
[1970-Jan-01 01:57:26.228356]: HES logged: false
[1970-Jan-01 01:57:26.256413]: HES logged: false
[1970-Jan-01 01:57:26.330903]: HES logged: false
[1970-Jan-01 01:57:26.387440]: HES logged: false
[1970-Jan-01 01:57:26.459875]: HES logged: false
[1970-Jan-01 01:57:26.487688]: HES logged: false
[1970-Jan-01 01:57:26.514687]: HES logged: false
[1970-Jan-01 01:57:26.543196]: HES logged: false
[1970-Jan-01 01:57:26.575814]: HES logged: true
[1970-Jan-01 01:57:27.099301]: HES logged: false
[1970-Jan-01 01:57:27.131822]: HES logged: false
[1970-Jan-01 01:57:27.184369]: HES logged: false
[1970-Jan-01 01:57:27.224796]: HES logged: false
[1970-Jan-01 01:57:27.257950]: HES logged: false
[1970-Jan-01 01:57:27.284551]: HES logged: false
[1970-Jan-01 01:57:27.311918]: HES logged: false
[1970-Jan-01 01:57:27.344992]: HES logged: false
[1970-Jan-01 01:57:27.372032]: HES logged: false
[1970-Jan-01 01:57:27.422951]: HES logged: false
[1970-Jan-01 01:57:27.450833]: HES logged: false
[1970-Jan-01 01:57:27.482336]: HES logged: false
[1970-Jan-01 01:57:27.509234]: HES logged: false
[1970-Jan-01 01:57:27.563299]: HES logged: false
[1970-Jan-01 01:57:27.589419]: HES logged: false
[1970-Jan-01 01:57:27.624373]: HES logged: false
[1970-Jan-01 01:57:27.674152]: HES logged: false
[1970-Jan-01 01:57:27.701356]: HES logged: false
[1970-Jan-01 01:57:27.735243]: HES logged: false
[1970-Jan-01 01:57:27.766251]: HES logged: false
[1970-Jan-01 01:57:27.793773]: HES logged: false
[1970-Jan-01 01:57:27.872954]: HES logged: false
[1970-Jan-01 01:57:27.935977]: HES logged: false
[1970-Jan-01 01:57:27.975830]: HES logged: false
[1970-Jan-01 01:57:28.002800]: HES logged: false
[1970-Jan-01 01:57:28.030754]: HES logged: false
[1970-Jan-01 01:57:28.064803]: HES logged: false
[1970-Jan-01 01:57:28.113073]: HES logged: true
[1970-Jan-01 01:57:28.666806]: HES logged: false
[1970-Jan-01 01:57:28.715628]: HES logged: false
[1970-Jan-01 01:57:28.745968]: HES logged: false
[1970-Jan-01 01:57:28.778499]: HES logged: false
[1970-Jan-01 01:57:28.807124]: HES logged: false
[1970-Jan-01 01:57:28.841691]: HES logged: false
[1970-Jan-01 01:57:28.868536]: HES logged: false
[1970-Jan-01 01:57:28.904473]: HES logged: false
[1970-Jan-01 01:57:28.938361]: HES logged: false
[1970-Jan-01 01:57:28.982853]: HES logged: false
[1970-Jan-01 01:57:29.008590]: HES logged: false
[1970-Jan-01 01:57:29.040879]: HES logged: false
[1970-Jan-01 01:57:29.068380]: HES logged: false
[1970-Jan-01 01:57:29.095543]: HES logged: false
[1970-Jan-01 01:57:29.122920]: HES logged: false
[1970-Jan-01 01:57:29.181602]: HES logged: false
[1970-Jan-01 01:57:29.234603]: HES logged: false
[1970-Jan-01 01:57:29.268254]: HES logged: false
[1970-Jan-01 01:57:29.303634]: HES logged: false
[1970-Jan-01 01:57:29.331855]: HES logged: false
[1970-Jan-01 01:57:29.405807]: HES logged: false
[1970-Jan-01 01:57:29.482628]: HES logged: false
[1970-Jan-01 01:57:29.512816]: HES logged: false
[1970-Jan-01 01:57:29.540969]: HES logged: false
[1970-Jan-01 01:57:29.571991]: HES logged: false
[1970-Jan-01 01:57:29.599379]: HES logged: false
[1970-Jan-01 01:57:29.628441]: HES logged: true
[1970-Jan-01 01:57:30.173137]: HES logged: false
[1970-Jan-01 01:57:30.209176]: HES logged: false
[1970-Jan-01 01:57:30.260911]: HES logged: false
[1970-Jan-01 01:57:30.314125]: HES logged: false
[1970-Jan-01 01:57:30.340958]: HES logged: false
[1970-Jan-01 01:57:30.367944]: HES logged: false
[1970-Jan-01 01:57:30.396075]: HES logged: false
[1970-Jan-01 01:57:30.428255]: HES logged: false
[1970-Jan-01 01:57:30.474027]: HES logged: false
[1970-Jan-01 01:57:30.513312]: HES logged: false
[1970-Jan-01 01:57:30.545322]: HES logged: false
[1970-Jan-01 01:57:30.575964]: HES logged: false
[1970-Jan-01 01:57:30.603349]: HES logged: false
[1970-Jan-01 01:57:30.630685]: HES logged: false
[1970-Jan-01 01:57:30.656925]: HES logged: false
[1970-Jan-01 01:57:30.688820]: HES logged: false
[1970-Jan-01 01:57:30.740861]: HES logged: false
[1970-Jan-01 01:57:30.767825]: HES logged: false
[1970-Jan-01 01:57:30.800939]: HES logged: false
[1970-Jan-01 01:57:30.851910]: HES logged: false
[1970-Jan-01 01:57:30.879580]: HES logged: false
[1970-Jan-01 01:57:30.921062]: HES logged: false
[1970-Jan-01 01:57:30.986578]: HES logged: false
[1970-Jan-01 01:57:31.048836]: HES logged: false
[1970-Jan-01 01:57:31.087728]: HES logged: false
[1970-Jan-01 01:57:31.119991]: HES logged: false
[1970-Jan-01 01:57:31.147952]: HES logged: true
[1970-Jan-01 01:57:31.684303]: HES logged: false
[1970-Jan-01 01:57:31.734074]: HES logged: false
[1970-Jan-01 01:57:31.768279]: HES logged: false
[1970-Jan-01 01:57:31.794982]: HES logged: false
[1970-Jan-01 01:57:31.830748]: HES logged: false
[1970-Jan-01 01:57:31.856922]: HES logged: false
[1970-Jan-01 01:57:31.883319]: HES logged: false
[1970-Jan-01 01:57:31.935304]: HES logged: false
[1970-Jan-01 01:57:31.981282]: HES logged: false
[1970-Jan-01 01:57:32.013733]: HES logged: false
[1970-Jan-01 01:57:32.046039]: HES logged: false
[1970-Jan-01 01:57:32.073179]: HES logged: false
[1970-Jan-01 01:57:32.100312]: HES logged: false
[1970-Jan-01 01:57:32.127641]: HES logged: false
[1970-Jan-01 01:57:32.159280]: HES logged: false
[1970-Jan-01 01:57:32.187163]: HES logged: false
[1970-Jan-01 01:57:32.250298]: HES logged: false
[1970-Jan-01 01:57:32.286364]: HES logged: false
[1970-Jan-01 01:57:32.313853]: HES logged: false
[1970-Jan-01 01:57:32.341364]: HES logged: false
[1970-Jan-01 01:57:32.367665]: HES logged: false
[1970-Jan-01 01:57:32.394974]: HES logged: false
[1970-Jan-01 01:57:32.425907]: HES logged: false
[1970-Jan-01 01:57:32.544793]: HES logged: false
[1970-Jan-01 01:57:32.594868]: HES logged: false
[1970-Jan-01 01:57:32.623185]: HES logged: false
[1970-Jan-01 01:57:32.651651]: HES logged: true
[1970-Jan-01 01:57:33.164906]: HES logged: false
[1970-Jan-01 01:57:33.196283]: HES logged: false
[1970-Jan-01 01:57:33.244321]: HES logged: false
[1970-Jan-01 01:57:33.285319]: HES logged: false
[1970-Jan-01 01:57:33.317320]: HES logged: false
[1970-Jan-01 01:57:33.344037]: HES logged: false
[1970-Jan-01 01:57:33.370704]: HES logged: false
[1970-Jan-01 01:57:33.397934]: HES logged: false
[1970-Jan-01 01:57:33.429369]: HES logged: false
[1970-Jan-01 01:57:33.456842]: HES logged: false
[1970-Jan-01 01:57:33.508817]: HES logged: false
[1970-Jan-01 01:57:33.540932]: HES logged: false
[1970-Jan-01 01:57:33.589828]: HES logged: false
[1970-Jan-01 01:57:33.616635]: HES logged: false
[1970-Jan-01 01:57:33.644284]: HES logged: false
[1970-Jan-01 01:57:33.681231]: HES logged: false
[1970-Jan-01 01:57:33.707473]: HES logged: false
[1970-Jan-01 01:57:33.754735]: HES logged: false
[1970-Jan-01 01:57:33.783934]: HES logged: false
[1970-Jan-01 01:57:33.814452]: HES logged: false
[1970-Jan-01 01:57:33.844274]: HES logged: false
[1970-Jan-01 01:57:33.875733]: HES logged: false
[1970-Jan-01 01:57:33.902719]: HES logged: false
[1970-Jan-01 01:57:33.935154]: HES logged: false
[1970-Jan-01 01:57:33.971338]: HES logged: false
[1970-Jan-01 01:57:34.057938]: HES logged: false
[1970-Jan-01 01:57:34.113604]: HES logged: false
[1970-Jan-01 01:57:34.166038]: HES logged: true
[1970-Jan-01 01:57:35.585003]: HES logged: false
[1970-Jan-01 01:57:35.705939]: HES logged: false
[1970-Jan-01 01:57:35.766090]: HES logged: false
[1970-Jan-01 01:57:35.858502]: HES logged: false
[1970-Jan-01 01:57:35.891100]: HES logged: false
[1970-Jan-01 01:57:35.939242]: HES logged: false
[1970-Jan-01 01:57:35.971048]: HES logged: false
[1970-Jan-01 01:57:36.008637]: HES logged: false
[1970-Jan-01 01:57:36.058709]: HES logged: false
[1970-Jan-01 01:57:36.085471]: HES logged: false
[1970-Jan-01 01:57:36.112879]: HES logged: false
[1970-Jan-01 01:57:36.144036]: HES logged: false
[1970-Jan-01 01:57:36.171539]: HES logged: false
[1970-Jan-01 01:57:36.199743]: HES logged: false
[1970-Jan-01 01:57:36.235677]: HES logged: false
[1970-Jan-01 01:57:36.269533]: HES logged: false
[1970-Jan-01 01:57:36.329727]: HES logged: false
[1970-Jan-01 01:57:36.364554]: HES logged: false
[1970-Jan-01 01:57:36.396395]: HES logged: false
[1970-Jan-01 01:57:36.425511]: HES logged: false
[1970-Jan-01 01:57:36.477181]: HES logged: false
[1970-Jan-01 01:57:36.508479]: HES logged: false
[1970-Jan-01 01:57:36.554429]: HES logged: false
[1970-Jan-01 01:57:36.589591]: HES logged: false
[1970-Jan-01 01:57:36.617249]: HES logged: false
[1970-Jan-01 01:57:36.643671]: HES logged: false
[1970-Jan-01 01:57:36.699448]: HES logged: false
[1970-Jan-01 01:57:36.828098]: HES logged: true
[1970-Jan-01 01:57:37.699991]: HES logged: false
[1970-Jan-01 01:57:37.728131]: HES logged: false
[1970-Jan-01 01:57:37.759302]: HES logged: false
[1970-Jan-01 01:57:37.792178]: HES logged: false
[1970-Jan-01 01:57:37.826143]: HES logged: false
[1970-Jan-01 01:57:37.877029]: HES logged: false
[1970-Jan-01 01:57:37.908583]: HES logged: false
[1970-Jan-01 01:57:37.935535]: HES logged: false
[1970-Jan-01 01:57:37.962178]: HES logged: false
[1970-Jan-01 01:57:37.989143]: HES logged: false
[1970-Jan-01 01:57:38.023077]: HES logged: false
[1970-Jan-01 01:57:38.049816]: HES logged: false
[1970-Jan-01 01:57:38.098757]: HES logged: false
[1970-Jan-01 01:57:38.133153]: HES logged: false
[1970-Jan-01 01:57:38.164869]: HES logged: false
[1970-Jan-01 01:57:38.212724]: HES logged: false
[1970-Jan-01 01:57:38.242326]: HES logged: false
[1970-Jan-01 01:57:38.269907]: HES logged: false
[1970-Jan-01 01:57:38.301154]: HES logged: false
[1970-Jan-01 01:57:38.354700]: HES logged: false
[1970-Jan-01 01:57:38.396291]: HES logged: false
[1970-Jan-01 01:57:38.427415]: HES logged: false
[1970-Jan-01 01:57:38.454025]: HES logged: false
[1970-Jan-01 01:57:38.481381]: HES logged: false
[1970-Jan-01 01:57:38.507144]: HES logged: false
[1970-Jan-01 01:57:38.539157]: HES logged: false
[1970-Jan-01 01:57:38.567147]: HES logged: true
[1970-Jan-01 01:57:39.081728]: HES logged: false
[1970-Jan-01 01:57:39.108182]: HES logged: false
[1970-Jan-01 01:57:39.151481]: HES logged: false
[1970-Jan-01 01:57:39.192214]: HES logged: false
[1970-Jan-01 01:57:39.221107]: HES logged: false
[1970-Jan-01 01:57:39.273763]: HES logged: false
[1970-Jan-01 01:57:39.305922]: HES logged: false
[1970-Jan-01 01:57:39.332679]: HES logged: false
[1970-Jan-01 01:57:39.359025]: HES logged: false
[1970-Jan-01 01:57:39.397595]: HES logged: false
[1970-Jan-01 01:57:39.448672]: HES logged: false
[1970-Jan-01 01:57:39.480427]: HES logged: false
[1970-Jan-01 01:57:39.508226]: HES logged: false
[1970-Jan-01 01:57:39.535928]: HES logged: false
[1970-Jan-01 01:57:39.563042]: HES logged: false
[1970-Jan-01 01:57:39.595362]: HES logged: false
[1970-Jan-01 01:57:39.623363]: HES logged: false
[1970-Jan-01 01:57:39.673915]: HES logged: false
[1970-Jan-01 01:57:39.706116]: HES logged: false
[1970-Jan-01 01:57:39.733126]: HES logged: false
[1970-Jan-01 01:57:39.764319]: HES logged: false
[1970-Jan-01 01:57:39.811377]: HES logged: false
[1970-Jan-01 01:57:39.843750]: HES logged: false
[1970-Jan-01 01:57:39.872960]: HES logged: false
[1970-Jan-01 01:57:39.922943]: HES logged: false
[1970-Jan-01 01:57:39.950637]: HES logged: false
[1970-Jan-01 01:57:39.982682]: HES logged: true
[1970-Jan-01 01:57:40.500692]: HES logged: false
[1970-Jan-01 01:57:40.528822]: HES logged: false
[1970-Jan-01 01:57:40.564335]: HES logged: false
[1970-Jan-01 01:57:40.591696]: HES logged: false
[1970-Jan-01 01:57:40.620388]: HES logged: false
[1970-Jan-01 01:57:40.646686]: HES logged: false
[1970-Jan-01 01:57:40.692604]: HES logged: false
[1970-Jan-01 01:57:40.733646]: HES logged: false
[1970-Jan-01 01:57:40.759560]: HES logged: false
[1970-Jan-01 01:57:40.786317]: HES logged: false
[1970-Jan-01 01:57:40.814279]: HES logged: false
[1970-Jan-01 01:57:40.846776]: HES logged: false
[1970-Jan-01 01:57:40.874467]: HES logged: false
[1970-Jan-01 01:57:40.926465]: HES logged: false
[1970-Jan-01 01:57:40.978606]: HES logged: false
[1970-Jan-01 01:57:41.007018]: HES logged: false
[1970-Jan-01 01:57:41.036169]: HES logged: false
[1970-Jan-01 01:57:41.063722]: HES logged: false
[1970-Jan-01 01:57:41.096300]: HES logged: false
[1970-Jan-01 01:57:41.132991]: HES logged: false
[1970-Jan-01 01:57:41.160857]: HES logged: false
[1970-Jan-01 01:57:41.206217]: HES logged: false
[1970-Jan-01 01:57:41.243686]: HES logged: false
[1970-Jan-01 01:57:41.270398]: HES logged: false
[1970-Jan-01 01:57:41.297930]: HES logged: false
[1970-Jan-01 01:57:41.325526]: HES logged: false
[1970-Jan-01 01:57:41.353017]: HES logged: false
[1970-Jan-01 01:57:41.388182]: HES logged: true
[1970-Jan-01 01:57:42.006888]: HES logged: false
[1970-Jan-01 01:57:42.056721]: HES logged: false
[1970-Jan-01 01:57:42.087095]: HES logged: false
[1970-Jan-01 01:57:42.114178]: HES logged: false
[1970-Jan-01 01:57:42.141446]: HES logged: false
[1970-Jan-01 01:57:42.174719]: HES logged: false
[1970-Jan-01 01:57:42.213795]: HES logged: false
[1970-Jan-01 01:57:42.258017]: HES logged: false
[1970-Jan-01 01:57:42.285227]: HES logged: false
[1970-Jan-01 01:57:42.313360]: HES logged: false
[1970-Jan-01 01:57:42.344441]: HES logged: false
[1970-Jan-01 01:57:42.375676]: HES logged: false
[1970-Jan-01 01:57:42.402799]: HES logged: false
[1970-Jan-01 01:57:42.429358]: HES logged: false
[1970-Jan-01 01:57:42.463090]: HES logged: false
[1970-Jan-01 01:57:42.515348]: HES logged: false
[1970-Jan-01 01:57:42.547009]: HES logged: false
[1970-Jan-01 01:57:42.595286]: HES logged: false
[1970-Jan-01 01:57:42.623139]: HES logged: false
[1970-Jan-01 01:57:42.651349]: HES logged: false
[1970-Jan-01 01:57:42.683708]: HES logged: false
[1970-Jan-01 01:57:42.723310]: HES logged: false
[1970-Jan-01 01:57:42.770297]: HES logged: false
[1970-Jan-01 01:57:42.801858]: HES logged: false
[1970-Jan-01 01:57:42.828645]: HES logged: false
[1970-Jan-01 01:57:42.856372]: HES logged: false
[1970-Jan-01 01:57:42.884575]: HES logged: true
[1970-Jan-01 01:57:43.377888]: HES logged: false
[1970-Jan-01 01:57:43.446091]: HES logged: false
[1970-Jan-01 01:57:43.507377]: HES logged: false
[1970-Jan-01 01:57:43.562244]: HES logged: false
[1970-Jan-01 01:57:43.594073]: HES logged: false
[1970-Jan-01 01:57:43.626326]: HES logged: false
[1970-Jan-01 01:57:43.673537]: HES logged: false
[1970-Jan-01 01:57:43.699228]: HES logged: false
[1970-Jan-01 01:57:43.727205]: HES logged: false
[1970-Jan-01 01:57:43.771886]: HES logged: false
[1970-Jan-01 01:57:43.809207]: HES logged: false
[1970-Jan-01 01:57:43.842108]: HES logged: false
[1970-Jan-01 01:57:43.871624]: HES logged: false
[1970-Jan-01 01:57:43.903418]: HES logged: false
[1970-Jan-01 01:57:43.931963]: HES logged: false
[1970-Jan-01 01:57:43.959858]: HES logged: false
[1970-Jan-01 01:57:43.986172]: HES logged: false
[1970-Jan-01 01:57:44.039084]: HES logged: false
[1970-Jan-01 01:57:44.072145]: HES logged: false
[1970-Jan-01 01:57:44.097452]: HES logged: false
[1970-Jan-01 01:57:44.125148]: HES logged: false
[1970-Jan-01 01:57:44.153869]: HES logged: false
[1970-Jan-01 01:57:44.185192]: HES logged: false
[1970-Jan-01 01:57:44.235012]: HES logged: false
[1970-Jan-01 01:57:44.284151]: HES logged: false
[1970-Jan-01 01:57:44.319918]: HES logged: false
[1970-Jan-01 01:57:44.347884]: HES logged: true
[1970-Jan-01 01:57:44.855728]: HES logged: false
[1970-Jan-01 01:57:44.885017]: HES logged: false
[1970-Jan-01 01:57:44.911719]: HES logged: false
[1970-Jan-01 01:57:44.992081]: HES logged: false
[1970-Jan-01 01:57:45.060746]: HES logged: false
[1970-Jan-01 01:57:45.096109]: HES logged: false
[1970-Jan-01 01:57:45.123523]: HES logged: false
[1970-Jan-01 01:57:45.151393]: HES logged: false
[1970-Jan-01 01:57:45.182699]: HES logged: false
[1970-Jan-01 01:57:45.209250]: HES logged: false
[1970-Jan-01 01:57:45.244181]: HES logged: false
[1970-Jan-01 01:57:45.270388]: HES logged: false
[1970-Jan-01 01:57:45.344306]: HES logged: false
[1970-Jan-01 01:57:45.370750]: HES logged: false
[1970-Jan-01 01:57:45.397164]: HES logged: false
[1970-Jan-01 01:57:45.426238]: HES logged: false
[1970-Jan-01 01:57:45.457502]: HES logged: false
[1970-Jan-01 01:57:45.489055]: HES logged: false
[1970-Jan-01 01:57:45.516797]: HES logged: false
[1970-Jan-01 01:57:45.567318]: HES logged: false
[1970-Jan-01 01:57:45.606385]: HES logged: false
[1970-Jan-01 01:57:45.639419]: HES logged: false
[1970-Jan-01 01:57:45.665593]: HES logged: false
[1970-Jan-01 01:57:45.692349]: HES logged: false
[1970-Jan-01 01:57:45.723123]: HES logged: false
[1970-Jan-01 01:57:45.749843]: HES logged: false
[1970-Jan-01 01:57:45.776652]: HES logged: false
[1970-Jan-01 01:57:45.827332]: HES logged: true
[1970-Jan-01 01:57:46.368583]: HES logged: false
[1970-Jan-01 01:57:46.401016]: HES logged: false
[1970-Jan-01 01:57:46.453015]: HES logged: false
[1970-Jan-01 01:57:46.526579]: HES logged: false
[1970-Jan-01 01:57:46.594143]: HES logged: false
[1970-Jan-01 01:57:46.640208]: HES logged: false
[1970-Jan-01 01:57:46.668459]: HES logged: false
[1970-Jan-01 01:57:46.703419]: HES logged: false
[1970-Jan-01 01:57:46.733380]: HES logged: false
[1970-Jan-01 01:57:46.764594]: HES logged: false
[1970-Jan-01 01:57:46.791969]: HES logged: false
[1970-Jan-01 01:57:46.830637]: HES logged: false
[1970-Jan-01 01:57:46.880772]: HES logged: false
[1970-Jan-01 01:57:46.909033]: HES logged: false
[1970-Jan-01 01:57:46.936547]: HES logged: false
[1970-Jan-01 01:57:46.983701]: HES logged: false
[1970-Jan-01 01:57:47.014866]: HES logged: false
[1970-Jan-01 01:57:47.042858]: HES logged: false
[1970-Jan-01 01:57:47.084578]: HES logged: false
[1970-Jan-01 01:57:47.126823]: HES logged: false
[1970-Jan-01 01:57:47.156113]: HES logged: false
[1970-Jan-01 01:57:47.187491]: HES logged: false
[1970-Jan-01 01:57:47.217495]: HES logged: false
[1970-Jan-01 01:57:47.248772]: HES logged: false
[1970-Jan-01 01:57:47.285186]: HES logged: false
[1970-Jan-01 01:57:47.321031]: HES logged: false
[1970-Jan-01 01:57:47.362510]: HES logged: false
[1970-Jan-01 01:57:47.392881]: HES logged: false
[1970-Jan-01 01:57:47.420290]: HES logged: false
[1970-Jan-01 01:57:47.448093]: HES logged: true
[1970-Jan-01 01:57:47.957172]: HES logged: false
[1970-Jan-01 01:57:47.985028]: HES logged: false
[1970-Jan-01 01:57:48.057163]: HES logged: false
[1970-Jan-01 01:57:48.295650]: HES logged: false
[1970-Jan-01 01:57:48.414741]: HES logged: false
[1970-Jan-01 01:57:48.579818]: HES logged: false
[1970-Jan-01 01:57:48.664688]: HES logged: false
[1970-Jan-01 01:57:48.734496]: HES logged: false
[1970-Jan-01 01:57:48.771627]: HES logged: false
[1970-Jan-01 01:57:48.798329]: HES logged: false
[1970-Jan-01 01:57:48.825252]: HES logged: false
[1970-Jan-01 01:57:48.854829]: HES logged: false
[1970-Jan-01 01:57:48.885074]: HES logged: false
[1970-Jan-01 01:57:48.937346]: HES logged: false
[1970-Jan-01 01:57:48.970529]: HES logged: false
[1970-Jan-01 01:57:48.996486]: HES logged: false
[1970-Jan-01 01:57:49.033005]: HES logged: false
[1970-Jan-01 01:57:49.059916]: HES logged: false
[1970-Jan-01 01:57:49.086406]: HES logged: false
[1970-Jan-01 01:57:49.113797]: HES logged: false
[1970-Jan-01 01:57:49.147286]: HES logged: false
[1970-Jan-01 01:57:49.195897]: HES logged: false
[1970-Jan-01 01:57:49.225284]: HES logged: false
[1970-Jan-01 01:57:49.278926]: HES logged: false
[1970-Jan-01 01:57:49.313783]: HES logged: false
[1970-Jan-01 01:57:49.342120]: HES logged: true
[1970-Jan-01 01:57:50.078132]: HES logged: false
[1970-Jan-01 01:57:50.105558]: HES logged: false
[1970-Jan-01 01:57:50.139473]: HES logged: false
[1970-Jan-01 01:57:50.169980]: HES logged: false
[1970-Jan-01 01:57:50.252623]: HES logged: false
[1970-Jan-01 01:57:50.302275]: HES logged: false
[1970-Jan-01 01:57:50.330684]: HES logged: false
[1970-Jan-01 01:57:50.361657]: HES logged: false
[1970-Jan-01 01:57:50.410960]: HES logged: false
[1970-Jan-01 01:57:50.437101]: HES logged: false
[1970-Jan-01 01:57:50.464330]: HES logged: false
[1970-Jan-01 01:57:50.511485]: HES logged: false
[1970-Jan-01 01:57:50.553312]: HES logged: false
[1970-Jan-01 01:57:50.579595]: HES logged: false
[1970-Jan-01 01:57:50.607013]: HES logged: false
[1970-Jan-01 01:57:50.638461]: HES logged: false
[1970-Jan-01 01:57:50.665208]: HES logged: false
[1970-Jan-01 01:57:50.691939]: HES logged: false
[1970-Jan-01 01:57:50.718809]: HES logged: false
[1970-Jan-01 01:57:50.763220]: HES logged: false
[1970-Jan-01 01:57:50.808176]: HES logged: false
[1970-Jan-01 01:57:50.844437]: HES logged: false
[1970-Jan-01 01:57:50.875882]: HES logged: false
[1970-Jan-01 01:57:50.904421]: HES logged: false
[1970-Jan-01 01:57:50.958608]: HES logged: false
[1970-Jan-01 01:57:50.985664]: HES logged: true
[1970-Jan-01 01:57:51.593835]: HES logged: false
[1970-Jan-01 01:57:51.630280]: HES logged: false
[1970-Jan-01 01:57:51.657798]: HES logged: false
[1970-Jan-01 01:57:51.683893]: HES logged: false
[1970-Jan-01 01:57:51.726943]: HES logged: false
[1970-Jan-01 01:57:51.769019]: HES logged: false
[1970-Jan-01 01:57:51.795241]: HES logged: false
[1970-Jan-01 01:57:51.822463]: HES logged: false
[1970-Jan-01 01:57:51.862768]: HES logged: false
[1970-Jan-01 01:57:51.897354]: HES logged: false
[1970-Jan-01 01:57:51.927184]: HES logged: false
[1970-Jan-01 01:57:51.959729]: HES logged: false
[1970-Jan-01 01:57:52.009671]: HES logged: false
[1970-Jan-01 01:57:52.040682]: HES logged: false
[1970-Jan-01 01:57:52.086946]: HES logged: false
[1970-Jan-01 01:57:52.138152]: HES logged: false
[1970-Jan-01 01:57:52.169419]: HES logged: false
[1970-Jan-01 01:57:52.195573]: HES logged: false
[1970-Jan-01 01:57:52.227284]: HES logged: false
[1970-Jan-01 01:57:52.272554]: HES logged: false
[1970-Jan-01 01:57:52.298771]: HES logged: false
[1970-Jan-01 01:57:52.325758]: HES logged: false
[1970-Jan-01 01:57:52.357771]: HES logged: false
[1970-Jan-01 01:57:52.402720]: HES logged: false
[1970-Jan-01 01:57:52.430839]: HES logged: false
[1970-Jan-01 01:57:52.461722]: HES logged: false
[1970-Jan-01 01:57:52.497389]: HES logged: false
[1970-Jan-01 01:57:52.542768]: HES logged: true
[1970-Jan-01 01:57:53.130911]: HES logged: false
[1970-Jan-01 01:57:53.202692]: HES logged: false
[1970-Jan-01 01:57:53.230393]: HES logged: false
[1970-Jan-01 01:57:53.259878]: HES logged: false
[1970-Jan-01 01:57:53.291739]: HES logged: false
[1970-Jan-01 01:57:53.335130]: HES logged: false
[1970-Jan-01 01:57:53.363382]: HES logged: false
[1970-Jan-01 01:57:53.394259]: HES logged: false
[1970-Jan-01 01:57:53.426069]: HES logged: false
[1970-Jan-01 01:57:53.470456]: HES logged: false
[1970-Jan-01 01:57:53.496049]: HES logged: false
[1970-Jan-01 01:57:53.522795]: HES logged: false
[1970-Jan-01 01:57:53.559710]: HES logged: false
[1970-Jan-01 01:57:53.603768]: HES logged: false
[1970-Jan-01 01:57:53.631138]: HES logged: false
[1970-Jan-01 01:57:53.660336]: HES logged: false
[1970-Jan-01 01:57:53.728709]: HES logged: false
[1970-Jan-01 01:57:53.758183]: HES logged: false
[1970-Jan-01 01:57:53.784307]: HES logged: false
[1970-Jan-01 01:57:53.820726]: HES logged: false
[1970-Jan-01 01:57:53.865575]: HES logged: false
[1970-Jan-01 01:57:53.891309]: HES logged: false
[1970-Jan-01 01:57:53.919040]: HES logged: false
[1970-Jan-01 01:57:53.953421]: HES logged: false
[1970-Jan-01 01:57:53.998669]: HES logged: false
[1970-Jan-01 01:57:54.025912]: HES logged: false
[1970-Jan-01 01:57:54.055174]: HES logged: true
[1970-Jan-01 01:58:11.955775]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:58:13.371487]: Moving down
[1970-Jan-01 01:58:13.399503]: loaded move
[1970-Jan-01 01:58:13.428468]: Last sync period had (0,0,252081) buffer fulls due to suspend moves
[1970-Jan-01 01:58:13.434624]: Libstepper All Axis Abort
[1970-Jan-01 01:58:13.437177]: Last sync period had (0,0,252081) buffer fulls due to suspend moves
[1970-Jan-01 01:58:13.439046]: Libstepper All Axis Abort
[1970-Jan-01 01:58:13.440987]: wait for PRU status in get position
[1970-Jan-01 01:58:13.442609]: wait for PRU status in get position
[1970-Jan-01 01:58:13.444222]: wait for PRU status in get position
[1970-Jan-01 01:58:13.451706]: GAP: Await->Done(Query)
[1970-Jan-01 01:58:13.453366]: Hit the build plate, stopping
[1970-Jan-01 01:58:13.896187]: HES logged: false
[1970-Jan-01 01:58:13.923231]: HES logged: false
[1970-Jan-01 01:58:13.949390]: HES logged: false
[1970-Jan-01 01:58:13.999353]: HES logged: false
[1970-Jan-01 01:58:14.029412]: HES logged: false
[1970-Jan-01 01:58:14.056081]: HES logged: false
[1970-Jan-01 01:58:14.083498]: HES logged: false
[1970-Jan-01 01:58:14.154424]: HES logged: false
[1970-Jan-01 01:58:14.185753]: HES logged: false
[1970-Jan-01 01:58:14.214193]: HES logged: false
[1970-Jan-01 01:58:14.259166]: HES logged: false
[1970-Jan-01 01:58:14.294068]: HES logged: false
[1970-Jan-01 01:58:14.321565]: HES logged: false
[1970-Jan-01 01:58:14.347795]: HES logged: false
[1970-Jan-01 01:58:14.393527]: HES logged: false
[1970-Jan-01 01:58:14.425312]: HES logged: false
[1970-Jan-01 01:58:14.451843]: HES logged: false
[1970-Jan-01 01:58:14.478831]: HES logged: false
[1970-Jan-01 01:58:14.522859]: HES logged: false
[1970-Jan-01 01:58:14.555119]: HES logged: false
[1970-Jan-01 01:58:14.582014]: HES logged: false
[1970-Jan-01 01:58:14.615168]: HES logged: false
[1970-Jan-01 01:58:14.681904]: HES logged: false
[1970-Jan-01 01:58:14.709428]: HES logged: true
[1970-Jan-01 01:58:14.726422]: GAP: Query->Await
[1970-Jan-01 01:58:14.756111]: GAP: Await
[1970-Jan-01 01:58:14.802895]: GAP: Await
[1970-Jan-01 01:58:14.815104]: TH0: Retreived step position 11731215
[1970-Jan-01 01:58:14.832562]: wait for PRU status in get position
[1970-Jan-01 01:58:14.834233]: wait for PRU status in get position
[1970-Jan-01 01:58:14.835837]: GAP: Await->Done(Query)
[1970-Jan-01 01:58:16.913699]: libstepper: true toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:58:20.700274]: libstepper: true toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:58:24.644793]: libstepper: true toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:58:28.574000]: libstepper: true toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:58:31.868165]: libstepper: true toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:58:36.773754]: HES logged: false
[1970-Jan-01 01:58:36.819655]: HES logged: false
[1970-Jan-01 01:58:36.851190]: HES logged: false
[1970-Jan-01 01:58:36.877935]: HES logged: false
[1970-Jan-01 01:58:36.915585]: HES logged: false
[1970-Jan-01 01:58:36.958477]: HES logged: false
[1970-Jan-01 01:58:36.984941]: HES logged: false
[1970-Jan-01 01:58:37.037417]: HES logged: false
[1970-Jan-01 01:58:37.125493]: HES logged: false
[1970-Jan-01 01:58:37.283251]: HES logged: false
[1970-Jan-01 01:58:37.422962]: HES logged: false
[1970-Jan-01 01:58:37.577515]: HES logged: false
[1970-Jan-01 01:58:37.726054]: HES logged: false
[1970-Jan-01 01:58:37.754063]: HES logged: false
[1970-Jan-01 01:58:37.798213]: HES logged: false
[1970-Jan-01 01:58:37.830976]: HES logged: false
[1970-Jan-01 01:58:37.866557]: HES logged: false
[1970-Jan-01 01:58:37.893979]: HES logged: false
[1970-Jan-01 01:58:37.937613]: HES logged: false
[1970-Jan-01 01:58:37.964076]: HES logged: false
[1970-Jan-01 01:58:37.996041]: HES logged: false
[1970-Jan-01 01:58:38.032533]: HES logged: false
[1970-Jan-01 01:58:38.070928]: HES logged: false
[1970-Jan-01 01:58:38.098907]: HES logged: true
[1970-Jan-01 01:58:39.815405]: HES logged: false
[1970-Jan-01 01:58:39.863958]: HES logged: false
[1970-Jan-01 01:58:39.910873]: HES logged: false
[1970-Jan-01 01:58:39.938090]: HES logged: false
[1970-Jan-01 01:58:39.966260]: HES logged: false
[1970-Jan-01 01:58:39.993065]: HES logged: false
[1970-Jan-01 01:58:40.034528]: HES logged: false
[1970-Jan-01 01:58:40.069830]: HES logged: false
[1970-Jan-01 01:58:40.096799]: HES logged: false
[1970-Jan-01 01:58:40.124820]: HES logged: false
[1970-Jan-01 01:58:40.191428]: HES logged: false
[1970-Jan-01 01:58:40.280862]: HES logged: false
[1970-Jan-01 01:58:40.324621]: HES logged: false
[1970-Jan-01 01:58:40.352951]: HES logged: false
[1970-Jan-01 01:58:40.399354]: HES logged: false
[1970-Jan-01 01:58:40.437922]: HES logged: false
[1970-Jan-01 01:58:40.475856]: HES logged: false
[1970-Jan-01 01:58:40.503403]: HES logged: false
[1970-Jan-01 01:58:40.532111]: HES logged: false
[1970-Jan-01 01:58:40.569388]: HES logged: false
[1970-Jan-01 01:58:40.607523]: HES logged: false
[1970-Jan-01 01:58:40.635973]: HES logged: false
[1970-Jan-01 01:58:40.667063]: HES logged: false
[1970-Jan-01 01:58:40.708400]: HES logged: false
[1970-Jan-01 01:58:40.743326]: HES logged: true
[1970-Jan-01 01:58:40.865339]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:58:42.472205]: HES logged: false
[1970-Jan-01 01:58:42.505910]: HES logged: false
[1970-Jan-01 01:58:42.571140]: HES logged: false
[1970-Jan-01 01:58:42.607395]: HES logged: false
[1970-Jan-01 01:58:42.639371]: HES logged: false
[1970-Jan-01 01:58:42.666195]: HES logged: false
[1970-Jan-01 01:58:42.709103]: HES logged: false
[1970-Jan-01 01:58:42.742914]: HES logged: false
[1970-Jan-01 01:58:42.770952]: HES logged: false
[1970-Jan-01 01:58:42.798545]: HES logged: false
[1970-Jan-01 01:58:42.843395]: HES logged: false
[1970-Jan-01 01:58:42.876690]: HES logged: false
[1970-Jan-01 01:58:42.913789]: HES logged: false
[1970-Jan-01 01:58:42.960694]: HES logged: false
[1970-Jan-01 01:58:42.999245]: HES logged: false
[1970-Jan-01 01:58:43.036232]: HES logged: false
[1970-Jan-01 01:58:43.097046]: HES logged: false
[1970-Jan-01 01:58:43.133128]: HES logged: false
[1970-Jan-01 01:58:43.158955]: HES logged: false
[1970-Jan-01 01:58:43.187729]: HES logged: false
[1970-Jan-01 01:58:43.227361]: HES logged: false
[1970-Jan-01 01:58:43.314661]: HES logged: false
[1970-Jan-01 01:58:43.377842]: HES logged: false
[1970-Jan-01 01:58:43.410357]: HES logged: true
[1970-Jan-01 01:58:45.120828]: HES logged: false
[1970-Jan-01 01:58:45.156209]: HES logged: false
[1970-Jan-01 01:58:45.202233]: HES logged: false
[1970-Jan-01 01:58:45.251348]: HES logged: false
[1970-Jan-01 01:58:45.285375]: HES logged: false
[1970-Jan-01 01:58:45.335849]: HES logged: false
[1970-Jan-01 01:58:45.362988]: HES logged: false
[1970-Jan-01 01:58:45.390664]: HES logged: false
[1970-Jan-01 01:58:45.432109]: HES logged: false
[1970-Jan-01 01:58:45.464444]: HES logged: false
[1970-Jan-01 01:58:45.491881]: HES logged: false
[1970-Jan-01 01:58:45.517565]: HES logged: false
[1970-Jan-01 01:58:45.560992]: HES logged: false
[1970-Jan-01 01:58:45.595968]: HES logged: false
[1970-Jan-01 01:58:45.622750]: HES logged: false
[1970-Jan-01 01:58:45.655504]: HES logged: false
[1970-Jan-01 01:58:45.697106]: HES logged: false
[1970-Jan-01 01:58:45.732834]: HES logged: false
[1970-Jan-01 01:58:45.781717]: HES logged: false
[1970-Jan-01 01:58:45.830367]: HES logged: false
[1970-Jan-01 01:58:45.861517]: HES logged: false
[1970-Jan-01 01:58:45.888438]: HES logged: false
[1970-Jan-01 01:58:45.914863]: HES logged: false
[1970-Jan-01 01:58:45.960246]: HES logged: false
[1970-Jan-01 01:58:45.992043]: HES logged: true
[1970-Jan-01 01:58:49.663223]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:58:50.460356]: HES logged: false
[1970-Jan-01 01:58:51.168448]: HES logged: false
[1970-Jan-01 01:58:51.313313]: HES logged: false
[1970-Jan-01 01:58:51.393640]: HES logged: false
[1970-Jan-01 01:58:51.421011]: HES logged: false
[1970-Jan-01 01:58:51.463976]: HES logged: false
[1970-Jan-01 01:58:51.495794]: HES logged: false
[1970-Jan-01 01:58:51.523070]: HES logged: false
[1970-Jan-01 01:58:51.548970]: HES logged: false
[1970-Jan-01 01:58:51.596316]: HES logged: false
[1970-Jan-01 01:58:51.628932]: HES logged: false
[1970-Jan-01 01:58:51.654929]: HES logged: false
[1970-Jan-01 01:58:51.682605]: HES logged: false
[1970-Jan-01 01:58:51.728406]: HES logged: false
[1970-Jan-01 01:58:51.764259]: HES logged: false
[1970-Jan-01 01:58:51.813200]: HES logged: false
[1970-Jan-01 01:58:51.866538]: HES logged: false
[1970-Jan-01 01:58:51.894860]: HES logged: false
[1970-Jan-01 01:58:51.923593]: HES logged: false
[1970-Jan-01 01:58:51.949607]: HES logged: false
[1970-Jan-01 01:58:52.003362]: HES logged: false
[1970-Jan-01 01:58:52.035634]: HES logged: false
[1970-Jan-01 01:58:52.061826]: HES logged: false
[1970-Jan-01 01:58:52.095082]: HES logged: false
[1970-Jan-01 01:58:52.141377]: HES logged: true
[1970-Jan-01 01:58:52.566532]: HES logged: false
[1970-Jan-01 01:58:52.608739]: HES logged: false
[1970-Jan-01 01:58:52.636389]: HES logged: false
[1970-Jan-01 01:58:52.663573]: HES logged: false
[1970-Jan-01 01:58:52.697162]: HES logged: false
[1970-Jan-01 01:58:52.739515]: HES logged: false
[1970-Jan-01 01:58:52.766898]: HES logged: false
[1970-Jan-01 01:58:52.802532]: HES logged: false
[1970-Jan-01 01:58:52.847182]: HES logged: false
[1970-Jan-01 01:58:52.877678]: HES logged: false
[1970-Jan-01 01:58:52.930767]: HES logged: false
[1970-Jan-01 01:58:52.972195]: HES logged: false
[1970-Jan-01 01:58:53.007357]: HES logged: false
[1970-Jan-01 01:58:53.035016]: HES logged: false
[1970-Jan-01 01:58:53.061395]: HES logged: false
[1970-Jan-01 01:58:53.104992]: HES logged: false
[1970-Jan-01 01:58:53.139350]: HES logged: false
[1970-Jan-01 01:58:53.166653]: HES logged: false
[1970-Jan-01 01:58:53.195649]: HES logged: false
[1970-Jan-01 01:58:53.241208]: HES logged: false
[1970-Jan-01 01:58:53.279052]: HES logged: false
[1970-Jan-01 01:58:53.307488]: HES logged: false
[1970-Jan-01 01:58:53.333843]: HES logged: false
[1970-Jan-01 01:58:53.377574]: HES logged: false
[1970-Jan-01 01:58:53.410661]: HES logged: false
[1970-Jan-01 01:58:53.461362]: HES logged: false
[1970-Jan-01 01:58:53.506422]: HES logged: true
[1970-Jan-01 01:58:54.094716]: HES logged: false
[1970-Jan-01 01:58:54.124947]: HES logged: false
[1970-Jan-01 01:58:54.150721]: HES logged: false
[1970-Jan-01 01:58:54.182522]: HES logged: false
[1970-Jan-01 01:58:54.233380]: HES logged: false
[1970-Jan-01 01:58:54.261736]: HES logged: false
[1970-Jan-01 01:58:54.288349]: HES logged: false
[1970-Jan-01 01:58:54.316738]: HES logged: false
[1970-Jan-01 01:58:54.364568]: HES logged: false
[1970-Jan-01 01:58:54.392080]: HES logged: false
[1970-Jan-01 01:58:54.419930]: HES logged: false
[1970-Jan-01 01:58:54.446411]: HES logged: false
[1970-Jan-01 01:58:54.495735]: HES logged: false
[1970-Jan-01 01:58:54.524520]: HES logged: false
[1970-Jan-01 01:58:54.577581]: HES logged: false
[1970-Jan-01 01:58:54.626504]: HES logged: false
[1970-Jan-01 01:58:54.652641]: HES logged: false
[1970-Jan-01 01:58:54.686723]: HES logged: false
[1970-Jan-01 01:58:54.724098]: HES logged: false
[1970-Jan-01 01:58:54.764364]: HES logged: false
[1970-Jan-01 01:58:54.792993]: HES logged: false
[1970-Jan-01 01:58:54.820819]: HES logged: false
[1970-Jan-01 01:58:54.855042]: HES logged: false
[1970-Jan-01 01:58:54.900344]: HES logged: false
[1970-Jan-01 01:58:54.929689]: HES logged: false
[1970-Jan-01 01:58:54.956412]: HES logged: false
[1970-Jan-01 01:58:54.989788]: HES logged: false
[1970-Jan-01 01:58:55.033898]: HES logged: true
[1970-Jan-01 01:58:55.798722]: HES logged: false
[1970-Jan-01 01:58:55.856305]: HES logged: false
[1970-Jan-01 01:58:55.904545]: HES logged: false
[1970-Jan-01 01:58:55.962104]: HES logged: false
[1970-Jan-01 01:58:55.996482]: HES logged: false
[1970-Jan-01 01:58:56.024022]: HES logged: false
[1970-Jan-01 01:58:56.056706]: HES logged: false
[1970-Jan-01 01:58:56.083343]: HES logged: false
[1970-Jan-01 01:58:56.114122]: HES logged: false
[1970-Jan-01 01:58:56.164592]: HES logged: false
[1970-Jan-01 01:58:56.190788]: HES logged: false
[1970-Jan-01 01:58:56.222004]: HES logged: false
[1970-Jan-01 01:58:56.256956]: HES logged: false
[1970-Jan-01 01:58:56.305460]: HES logged: false
[1970-Jan-01 01:58:56.333954]: HES logged: false
[1970-Jan-01 01:58:56.361759]: HES logged: false
[1970-Jan-01 01:58:56.406821]: HES logged: false
[1970-Jan-01 01:58:56.444422]: HES logged: false
[1970-Jan-01 01:58:56.472792]: HES logged: false
[1970-Jan-01 01:58:56.499440]: HES logged: false
[1970-Jan-01 01:58:56.536116]: HES logged: false
[1970-Jan-01 01:58:56.562995]: HES logged: false
[1970-Jan-01 01:58:56.589600]: HES logged: false
[1970-Jan-01 01:58:56.617051]: HES logged: false
[1970-Jan-01 01:58:56.699214]: HES logged: false
[1970-Jan-01 01:58:56.763678]: HES logged: false
[1970-Jan-01 01:58:56.802474]: HES logged: true
[1970-Jan-01 01:58:57.509123]: HES logged: false
[1970-Jan-01 01:58:57.544992]: HES logged: false
[1970-Jan-01 01:58:57.583271]: HES logged: false
[1970-Jan-01 01:58:57.618144]: HES logged: false
[1970-Jan-01 01:58:57.646544]: HES logged: false
[1970-Jan-01 01:58:57.673607]: HES logged: false
[1970-Jan-01 01:58:57.703980]: HES logged: false
[1970-Jan-01 01:58:57.751673]: HES logged: false
[1970-Jan-01 01:58:57.778761]: HES logged: false
[1970-Jan-01 01:58:57.808700]: HES logged: false
[1970-Jan-01 01:58:57.850759]: HES logged: false
[1970-Jan-01 01:58:57.885226]: HES logged: false
[1970-Jan-01 01:58:57.912638]: HES logged: false
[1970-Jan-01 01:58:57.949979]: HES logged: false
[1970-Jan-01 01:58:58.018070]: HES logged: false
[1970-Jan-01 01:58:58.046877]: HES logged: false
[1970-Jan-01 01:58:58.072696]: HES logged: false
[1970-Jan-01 01:58:58.110431]: HES logged: false
[1970-Jan-01 01:58:58.148221]: HES logged: false
[1970-Jan-01 01:58:58.175175]: HES logged: false
[1970-Jan-01 01:58:58.202518]: HES logged: false
[1970-Jan-01 01:58:58.244619]: HES logged: false
[1970-Jan-01 01:58:58.286681]: HES logged: false
[1970-Jan-01 01:58:58.313992]: HES logged: false
[1970-Jan-01 01:58:58.343120]: HES logged: false
[1970-Jan-01 01:58:58.396689]: HES logged: false
[1970-Jan-01 01:58:58.423421]: HES logged: false
[1970-Jan-01 01:58:58.498624]: HES logged: true
[1970-Jan-01 01:58:59.070650]: HES logged: false
[1970-Jan-01 01:58:59.119676]: HES logged: false
[1970-Jan-01 01:58:59.152520]: HES logged: false
[1970-Jan-01 01:58:59.206410]: HES logged: false
[1970-Jan-01 01:58:59.253423]: HES logged: false
[1970-Jan-01 01:58:59.283000]: HES logged: false
[1970-Jan-01 01:58:59.310001]: HES logged: false
[1970-Jan-01 01:58:59.354077]: HES logged: false
[1970-Jan-01 01:58:59.389994]: HES logged: false
[1970-Jan-01 01:58:59.417011]: HES logged: false
[1970-Jan-01 01:58:59.444152]: HES logged: false
[1970-Jan-01 01:58:59.483279]: HES logged: false
[1970-Jan-01 01:58:59.521696]: HES logged: false
[1970-Jan-01 01:58:59.552343]: HES logged: false
[1970-Jan-01 01:58:59.579555]: HES logged: false
[1970-Jan-01 01:58:59.632579]: HES logged: false
[1970-Jan-01 01:58:59.663258]: HES logged: false
[1970-Jan-01 01:58:59.695078]: HES logged: false
[1970-Jan-01 01:58:59.762847]: HES logged: false
[1970-Jan-01 01:58:59.797541]: HES logged: false
[1970-Jan-01 01:58:59.824955]: HES logged: false
[1970-Jan-01 01:58:59.852356]: HES logged: false
[1970-Jan-01 01:58:59.902718]: HES logged: false
[1970-Jan-01 01:58:59.943899]: HES logged: false
[1970-Jan-01 01:59:00.019365]: HES logged: false
[1970-Jan-01 01:59:00.279456]: HES logged: false
[1970-Jan-01 01:59:00.467301]: HES logged: true
[1970-Jan-01 01:59:11.706445]: HES logged: false
[1970-Jan-01 01:59:11.837577]: HES logged: false
[1970-Jan-01 01:59:11.988283]: HES logged: false
[1970-Jan-01 01:59:12.013845]: HES logged: false
[1970-Jan-01 01:59:12.045391]: HES logged: false
[1970-Jan-01 01:59:12.077412]: HES logged: false
[1970-Jan-01 01:59:12.121571]: HES logged: false
[1970-Jan-01 01:59:12.149563]: HES logged: false
[1970-Jan-01 01:59:12.176296]: HES logged: false
[1970-Jan-01 01:59:12.207702]: HES logged: false
[1970-Jan-01 01:59:12.254052]: HES logged: false
[1970-Jan-01 01:59:12.282402]: HES logged: false
[1970-Jan-01 01:59:12.308982]: HES logged: false
[1970-Jan-01 01:59:12.387496]: HES logged: false
[1970-Jan-01 01:59:12.457984]: HES logged: false
[1970-Jan-01 01:59:12.530882]: HES logged: false
[1970-Jan-01 01:59:12.557984]: HES logged: false
[1970-Jan-01 01:59:12.584109]: HES logged: false
[1970-Jan-01 01:59:12.626374]: HES logged: false
[1970-Jan-01 01:59:12.661946]: HES logged: false
[1970-Jan-01 01:59:12.687841]: HES logged: false
[1970-Jan-01 01:59:12.714728]: HES logged: false
[1970-Jan-01 01:59:12.759774]: HES logged: false
[1970-Jan-01 01:59:12.793204]: HES logged: false
[1970-Jan-01 01:59:12.819098]: HES logged: false
[1970-Jan-01 01:59:12.853308]: HES logged: true
[1970-Jan-01 01:59:13.339792]: HES logged: false
[1970-Jan-01 01:59:13.369133]: HES logged: false
[1970-Jan-01 01:59:13.404732]: HES logged: false
[1970-Jan-01 01:59:13.444233]: HES logged: false
[1970-Jan-01 01:59:13.472215]: HES logged: false
[1970-Jan-01 01:59:13.498165]: HES logged: false
[1970-Jan-01 01:59:13.529797]: HES logged: false
[1970-Jan-01 01:59:13.580419]: HES logged: false
[1970-Jan-01 01:59:13.628965]: HES logged: false
[1970-Jan-01 01:59:13.661956]: HES logged: false
[1970-Jan-01 01:59:13.706450]: HES logged: false
[1970-Jan-01 01:59:13.734608]: HES logged: false
[1970-Jan-01 01:59:13.762703]: HES logged: false
[1970-Jan-01 01:59:13.792824]: HES logged: false
[1970-Jan-01 01:59:13.841824]: HES logged: false
[1970-Jan-01 01:59:13.915510]: HES logged: false
[1970-Jan-01 01:59:13.976447]: HES logged: false
[1970-Jan-01 01:59:14.009286]: HES logged: false
[1970-Jan-01 01:59:14.038218]: HES logged: false
[1970-Jan-01 01:59:14.066027]: HES logged: false
[1970-Jan-01 01:59:14.119405]: HES logged: false
[1970-Jan-01 01:59:14.148486]: HES logged: false
[1970-Jan-01 01:59:14.194934]: HES logged: false
[1970-Jan-01 01:59:14.236245]: HES logged: false
[1970-Jan-01 01:59:14.277570]: HES logged: false
[1970-Jan-01 01:59:14.304552]: HES logged: false
[1970-Jan-01 01:59:14.332481]: HES logged: true
[1970-Jan-01 01:59:14.958410]: HES logged: false
[1970-Jan-01 01:59:15.009431]: HES logged: false
[1970-Jan-01 01:59:15.061858]: HES logged: false
[1970-Jan-01 01:59:15.087060]: HES logged: false
[1970-Jan-01 01:59:15.115454]: HES logged: false
[1970-Jan-01 01:59:15.150835]: HES logged: false
[1970-Jan-01 01:59:15.186565]: HES logged: false
[1970-Jan-01 01:59:15.214093]: HES logged: false
[1970-Jan-01 01:59:15.244302]: HES logged: false
[1970-Jan-01 01:59:15.298389]: HES logged: false
[1970-Jan-01 01:59:15.345859]: HES logged: false
[1970-Jan-01 01:59:15.375150]: HES logged: false
[1970-Jan-01 01:59:15.402763]: HES logged: false
[1970-Jan-01 01:59:15.434517]: HES logged: false
[1970-Jan-01 01:59:15.461436]: HES logged: false
[1970-Jan-01 01:59:15.488579]: HES logged: false
[1970-Jan-01 01:59:15.535209]: HES logged: false
[1970-Jan-01 01:59:15.573854]: HES logged: false
[1970-Jan-01 01:59:15.601078]: HES logged: false
[1970-Jan-01 01:59:15.628488]: HES logged: false
[1970-Jan-01 01:59:15.654928]: HES logged: false
[1970-Jan-01 01:59:15.686068]: HES logged: false
[1970-Jan-01 01:59:15.722342]: HES logged: false
[1970-Jan-01 01:59:15.747972]: HES logged: false
[1970-Jan-01 01:59:15.794669]: HES logged: false
[1970-Jan-01 01:59:15.839484]: HES logged: false
[1970-Jan-01 01:59:15.885423]: HES logged: false
[1970-Jan-01 01:59:15.914438]: HES logged: true
[1970-Jan-01 01:59:16.474962]: HES logged: false
[1970-Jan-01 01:59:16.503488]: HES logged: false
[1970-Jan-01 01:59:16.534619]: HES logged: false
[1970-Jan-01 01:59:16.561303]: HES logged: false
[1970-Jan-01 01:59:16.618163]: HES logged: false
[1970-Jan-01 01:59:16.648227]: HES logged: false
[1970-Jan-01 01:59:16.674736]: HES logged: false
[1970-Jan-01 01:59:16.702730]: HES logged: false
[1970-Jan-01 01:59:16.728676]: HES logged: false
[1970-Jan-01 01:59:16.754812]: HES logged: false
[1970-Jan-01 01:59:16.792074]: HES logged: false
[1970-Jan-01 01:59:16.817675]: HES logged: false
[1970-Jan-01 01:59:16.876195]: HES logged: false
[1970-Jan-01 01:59:16.905018]: HES logged: false
[1970-Jan-01 01:59:16.935913]: HES logged: false
[1970-Jan-01 01:59:16.984926]: HES logged: false
[1970-Jan-01 01:59:17.012638]: HES logged: false
[1970-Jan-01 01:59:17.042442]: HES logged: false
[1970-Jan-01 01:59:17.084142]: HES logged: false
[1970-Jan-01 01:59:17.125651]: HES logged: false
[1970-Jan-01 01:59:17.152123]: HES logged: false
[1970-Jan-01 01:59:17.183612]: HES logged: false
[1970-Jan-01 01:59:17.210473]: HES logged: false
[1970-Jan-01 01:59:17.236902]: HES logged: false
[1970-Jan-01 01:59:17.266563]: HES logged: false
[1970-Jan-01 01:59:17.294419]: HES logged: false
[1970-Jan-01 01:59:17.330902]: HES logged: false
[1970-Jan-01 01:59:17.384196]: HES logged: true
[1970-Jan-01 01:59:17.867927]: HES logged: false
[1970-Jan-01 01:59:17.900856]: HES logged: false
[1970-Jan-01 01:59:17.955529]: HES logged: false
[1970-Jan-01 01:59:17.987068]: HES logged: false
[1970-Jan-01 01:59:18.020297]: HES logged: false
[1970-Jan-01 01:59:18.065878]: HES logged: false
[1970-Jan-01 01:59:18.098937]: HES logged: false
[1970-Jan-01 01:59:18.125162]: HES logged: false
[1970-Jan-01 01:59:18.164678]: HES logged: false
[1970-Jan-01 01:59:18.203695]: HES logged: false
[1970-Jan-01 01:59:18.234973]: HES logged: false
[1970-Jan-01 01:59:18.263630]: HES logged: false
[1970-Jan-01 01:59:18.293524]: HES logged: false
[1970-Jan-01 01:59:18.319116]: HES logged: false
[1970-Jan-01 01:59:18.346620]: HES logged: false
[1970-Jan-01 01:59:18.378837]: HES logged: false
[1970-Jan-01 01:59:18.425670]: HES logged: false
[1970-Jan-01 01:59:18.468656]: HES logged: false
[1970-Jan-01 01:59:18.504823]: HES logged: false
[1970-Jan-01 01:59:18.531050]: HES logged: false
[1970-Jan-01 01:59:18.557311]: HES logged: false
[1970-Jan-01 01:59:18.604597]: HES logged: false
[1970-Jan-01 01:59:18.635793]: HES logged: false
[1970-Jan-01 01:59:18.684050]: HES logged: false
[1970-Jan-01 01:59:18.714117]: HES logged: false
[1970-Jan-01 01:59:18.741718]: HES logged: false
[1970-Jan-01 01:59:18.774590]: HES logged: true
[1970-Jan-01 01:59:19.269643]: HES logged: false
[1970-Jan-01 01:59:19.303726]: HES logged: false
[1970-Jan-01 01:59:19.331949]: HES logged: false
[1970-Jan-01 01:59:19.358692]: HES logged: false
[1970-Jan-01 01:59:19.385294]: HES logged: false
[1970-Jan-01 01:59:19.430977]: HES logged: false
[1970-Jan-01 01:59:19.474798]: HES logged: false
[1970-Jan-01 01:59:19.502168]: HES logged: false
[1970-Jan-01 01:59:19.533864]: HES logged: false
[1970-Jan-01 01:59:19.559528]: HES logged: false
[1970-Jan-01 01:59:19.586354]: HES logged: false
[1970-Jan-01 01:59:19.619065]: HES logged: false
[1970-Jan-01 01:59:19.646040]: HES logged: false
[1970-Jan-01 01:59:19.679861]: HES logged: false
[1970-Jan-01 01:59:19.749877]: HES logged: false
[1970-Jan-01 01:59:19.909125]: HES logged: false
[1970-Jan-01 01:59:19.986393]: HES logged: false
[1970-Jan-01 01:59:20.036803]: HES logged: false
[1970-Jan-01 01:59:20.181892]: HES logged: false
[1970-Jan-01 01:59:20.273750]: HES logged: false
[1970-Jan-01 01:59:20.339971]: HES logged: false
[1970-Jan-01 01:59:20.418074]: HES logged: false
[1970-Jan-01 01:59:20.467764]: HES logged: false
[1970-Jan-01 01:59:20.494982]: HES logged: false
[1970-Jan-01 01:59:20.526746]: HES logged: false
[1970-Jan-01 01:59:20.553209]: HES logged: false
[1970-Jan-01 01:59:20.580590]: HES logged: false
[1970-Jan-01 01:59:20.609141]: HES logged: true
[1970-Jan-01 01:59:21.202626]: HES logged: false
[1970-Jan-01 01:59:21.230259]: HES logged: false
[1970-Jan-01 01:59:21.278094]: HES logged: false
[1970-Jan-01 01:59:21.324386]: HES logged: false
[1970-Jan-01 01:59:21.353739]: HES logged: false
[1970-Jan-01 01:59:21.382611]: HES logged: false
[1970-Jan-01 01:59:21.437896]: HES logged: false
[1970-Jan-01 01:59:21.468337]: HES logged: false
[1970-Jan-01 01:59:21.505400]: HES logged: false
[1970-Jan-01 01:59:21.548844]: HES logged: false
[1970-Jan-01 01:59:21.580250]: HES logged: false
[1970-Jan-01 01:59:21.608540]: HES logged: false
[1970-Jan-01 01:59:21.636640]: HES logged: false
[1970-Jan-01 01:59:21.663339]: HES logged: false
[1970-Jan-01 01:59:21.691875]: HES logged: false
[1970-Jan-01 01:59:21.726775]: HES logged: false
[1970-Jan-01 01:59:21.776211]: HES logged: false
[1970-Jan-01 01:59:21.810320]: HES logged: false
[1970-Jan-01 01:59:21.842296]: HES logged: false
[1970-Jan-01 01:59:21.873869]: HES logged: false
[1970-Jan-01 01:59:21.901654]: HES logged: false
[1970-Jan-01 01:59:21.928672]: HES logged: false
[1970-Jan-01 01:59:21.983438]: HES logged: false
[1970-Jan-01 01:59:22.018646]: HES logged: false
[1970-Jan-01 01:59:22.071794]: HES logged: false
[1970-Jan-01 01:59:22.104402]: HES logged: false
[1970-Jan-01 01:59:22.132428]: HES logged: true
[1970-Jan-01 01:59:22.718627]: HES logged: false
[1970-Jan-01 01:59:22.763891]: HES logged: false
[1970-Jan-01 01:59:22.856562]: HES logged: false
[1970-Jan-01 01:59:22.978498]: HES logged: false
[1970-Jan-01 01:59:23.164785]: HES logged: false
[1970-Jan-01 01:59:23.321898]: HES logged: false
[1970-Jan-01 01:59:23.374892]: HES logged: false
[1970-Jan-01 01:59:23.401767]: HES logged: false
[1970-Jan-01 01:59:23.432049]: HES logged: false
[1970-Jan-01 01:59:23.460264]: HES logged: false
[1970-Jan-01 01:59:23.486785]: HES logged: false
[1970-Jan-01 01:59:23.519561]: HES logged: false
[1970-Jan-01 01:59:23.547426]: HES logged: false
[1970-Jan-01 01:59:23.589353]: HES logged: false
[1970-Jan-01 01:59:23.639011]: HES logged: false
[1970-Jan-01 01:59:23.666335]: HES logged: false
[1970-Jan-01 01:59:23.692276]: HES logged: false
[1970-Jan-01 01:59:23.719716]: HES logged: false
[1970-Jan-01 01:59:23.802745]: HES logged: false
[1970-Jan-01 01:59:23.893757]: HES logged: false
[1970-Jan-01 01:59:23.921903]: HES logged: false
[1970-Jan-01 01:59:23.948433]: HES logged: false
[1970-Jan-01 01:59:23.980788]: HES logged: false
[1970-Jan-01 01:59:24.009800]: HES logged: false
[1970-Jan-01 01:59:24.036501]: HES logged: false
[1970-Jan-01 01:59:24.067993]: HES logged: false
[1970-Jan-01 01:59:24.111190]: HES logged: true
[1970-Jan-01 01:59:24.642503]: HES logged: false
[1970-Jan-01 01:59:24.674261]: HES logged: false
[1970-Jan-01 01:59:24.700320]: HES logged: false
[1970-Jan-01 01:59:24.732289]: HES logged: false
[1970-Jan-01 01:59:24.760349]: HES logged: false
[1970-Jan-01 01:59:24.786559]: HES logged: false
[1970-Jan-01 01:59:24.822342]: HES logged: false
[1970-Jan-01 01:59:24.861939]: HES logged: false
[1970-Jan-01 01:59:24.901279]: HES logged: false
[1970-Jan-01 01:59:24.955806]: HES logged: false
[1970-Jan-01 01:59:24.982482]: HES logged: false
[1970-Jan-01 01:59:25.014662]: HES logged: false
[1970-Jan-01 01:59:25.042041]: HES logged: false
[1970-Jan-01 01:59:25.072410]: HES logged: false
[1970-Jan-01 01:59:25.120336]: HES logged: false
[1970-Jan-01 01:59:25.157948]: HES logged: false
[1970-Jan-01 01:59:25.184083]: HES logged: false
[1970-Jan-01 01:59:25.218735]: HES logged: false
[1970-Jan-01 01:59:25.248005]: HES logged: false
[1970-Jan-01 01:59:25.326421]: HES logged: false
[1970-Jan-01 01:59:25.389024]: HES logged: false
[1970-Jan-01 01:59:25.434827]: HES logged: false
[1970-Jan-01 01:59:25.465776]: HES logged: false
[1970-Jan-01 01:59:25.518466]: HES logged: false
[1970-Jan-01 01:59:25.544493]: HES logged: false
[1970-Jan-01 01:59:25.571550]: HES logged: false
[1970-Jan-01 01:59:25.598523]: HES logged: true
[1970-Jan-01 01:59:26.111105]: HES logged: false
[1970-Jan-01 01:59:26.154231]: HES logged: false
[1970-Jan-01 01:59:26.202078]: HES logged: false
[1970-Jan-01 01:59:26.230805]: HES logged: false
[1970-Jan-01 01:59:26.258727]: HES logged: false
[1970-Jan-01 01:59:26.285781]: HES logged: false
[1970-Jan-01 01:59:26.313992]: HES logged: false
[1970-Jan-01 01:59:26.346516]: HES logged: false
[1970-Jan-01 01:59:26.382484]: HES logged: false
[1970-Jan-01 01:59:26.436997]: HES logged: false
[1970-Jan-01 01:59:26.468833]: HES logged: false
[1970-Jan-01 01:59:26.494690]: HES logged: false
[1970-Jan-01 01:59:26.522717]: HES logged: false
[1970-Jan-01 01:59:26.569313]: HES logged: false
[1970-Jan-01 01:59:26.600701]: HES logged: false
[1970-Jan-01 01:59:26.629165]: HES logged: false
[1970-Jan-01 01:59:26.676544]: HES logged: false
[1970-Jan-01 01:59:26.707050]: HES logged: false
[1970-Jan-01 01:59:26.741462]: HES logged: false
[1970-Jan-01 01:59:26.766671]: HES logged: false
[1970-Jan-01 01:59:26.794239]: HES logged: false
[1970-Jan-01 01:59:26.866198]: HES logged: false
[1970-Jan-01 01:59:26.928202]: HES logged: false
[1970-Jan-01 01:59:26.978229]: HES logged: false
[1970-Jan-01 01:59:27.005396]: HES logged: false
[1970-Jan-01 01:59:27.037076]: HES logged: false
[1970-Jan-01 01:59:27.063493]: HES logged: false
[1970-Jan-01 01:59:27.111473]: HES logged: true
[1970-Jan-01 01:59:27.653522]: HES logged: false
[1970-Jan-01 01:59:27.680632]: HES logged: false
[1970-Jan-01 01:59:27.733714]: HES logged: false
[1970-Jan-01 01:59:27.762921]: HES logged: false
[1970-Jan-01 01:59:27.794407]: HES logged: false
[1970-Jan-01 01:59:27.826333]: HES logged: false
[1970-Jan-01 01:59:27.853780]: HES logged: false
[1970-Jan-01 01:59:27.879788]: HES logged: false
[1970-Jan-01 01:59:27.906075]: HES logged: false
[1970-Jan-01 01:59:27.934454]: HES logged: false
[1970-Jan-01 01:59:27.974172]: HES logged: false
[1970-Jan-01 01:59:28.013749]: HES logged: false
[1970-Jan-01 01:59:28.042320]: HES logged: false
[1970-Jan-01 01:59:28.073170]: HES logged: false
[1970-Jan-01 01:59:28.105236]: HES logged: false
[1970-Jan-01 01:59:28.134358]: HES logged: false
[1970-Jan-01 01:59:28.182506]: HES logged: false
[1970-Jan-01 01:59:28.209925]: HES logged: false
[1970-Jan-01 01:59:28.265604]: HES logged: false
[1970-Jan-01 01:59:28.304174]: HES logged: false
[1970-Jan-01 01:59:28.332772]: HES logged: false
[1970-Jan-01 01:59:28.405697]: HES logged: false
[1970-Jan-01 01:59:28.458199]: HES logged: false
[1970-Jan-01 01:59:28.511642]: HES logged: false
[1970-Jan-01 01:59:28.538431]: HES logged: false
[1970-Jan-01 01:59:28.565521]: HES logged: false
[1970-Jan-01 01:59:28.601133]: HES logged: true
[1970-Jan-01 01:59:29.134268]: HES logged: false
[1970-Jan-01 01:59:29.162234]: HES logged: false
[1970-Jan-01 01:59:29.197984]: HES logged: false
[1970-Jan-01 01:59:29.239842]: HES logged: false
[1970-Jan-01 01:59:29.311787]: HES logged: false
[1970-Jan-01 01:59:29.339089]: HES logged: false
[1970-Jan-01 01:59:29.366293]: HES logged: false
[1970-Jan-01 01:59:29.392208]: HES logged: false
[1970-Jan-01 01:59:29.425576]: HES logged: false
[1970-Jan-01 01:59:29.456110]: HES logged: false
[1970-Jan-01 01:59:29.495671]: HES logged: false
[1970-Jan-01 01:59:29.540604]: HES logged: false
[1970-Jan-01 01:59:29.568206]: HES logged: false
[1970-Jan-01 01:59:29.595565]: HES logged: false
[1970-Jan-01 01:59:29.623626]: HES logged: false
[1970-Jan-01 01:59:29.652139]: HES logged: false
[1970-Jan-01 01:59:29.686902]: HES logged: false
[1970-Jan-01 01:59:29.714460]: HES logged: false
[1970-Jan-01 01:59:29.766893]: HES logged: false
[1970-Jan-01 01:59:29.801003]: HES logged: false
[1970-Jan-01 01:59:29.848598]: HES logged: false
[1970-Jan-01 01:59:29.874093]: HES logged: false
[1970-Jan-01 01:59:29.945707]: HES logged: false
[1970-Jan-01 01:59:30.008888]: HES logged: false
[1970-Jan-01 01:59:30.052323]: HES logged: false
[1970-Jan-01 01:59:30.079268]: HES logged: false
[1970-Jan-01 01:59:30.107125]: HES logged: true
[1970-Jan-01 01:59:30.615104]: HES logged: false
[1970-Jan-01 01:59:30.642037]: HES logged: false
[1970-Jan-01 01:59:30.668004]: HES logged: false
[1970-Jan-01 01:59:30.698970]: HES logged: false
[1970-Jan-01 01:59:30.726929]: HES logged: false
[1970-Jan-01 01:59:30.763929]: HES logged: false
[1970-Jan-01 01:59:30.803720]: HES logged: false
[1970-Jan-01 01:59:30.835076]: HES logged: false
[1970-Jan-01 01:59:30.866139]: HES logged: false
[1970-Jan-01 01:59:30.893302]: HES logged: false
[1970-Jan-01 01:59:30.947614]: HES logged: false
[1970-Jan-01 01:59:30.974759]: HES logged: false
[1970-Jan-01 01:59:31.011718]: HES logged: false
[1970-Jan-01 01:59:31.053380]: HES logged: false
[1970-Jan-01 01:59:31.088616]: HES logged: false
[1970-Jan-01 01:59:31.117199]: HES logged: false
[1970-Jan-01 01:59:31.143343]: HES logged: false
[1970-Jan-01 01:59:31.169972]: HES logged: false
[1970-Jan-01 01:59:31.197564]: HES logged: false
[1970-Jan-01 01:59:31.228597]: HES logged: false
[1970-Jan-01 01:59:31.262611]: HES logged: false
[1970-Jan-01 01:59:31.317615]: HES logged: false
[1970-Jan-01 01:59:31.348665]: HES logged: false
[1970-Jan-01 01:59:31.374611]: HES logged: false
[1970-Jan-01 01:59:31.406819]: HES logged: false
[1970-Jan-01 01:59:31.485729]: HES logged: false
[1970-Jan-01 01:59:31.584665]: HES logged: true
[1970-Jan-01 01:59:32.125335]: HES logged: false
[1970-Jan-01 01:59:32.151534]: HES logged: false
[1970-Jan-01 01:59:32.177676]: HES logged: false
[1970-Jan-01 01:59:32.205124]: HES logged: false
[1970-Jan-01 01:59:32.236026]: HES logged: false
[1970-Jan-01 01:59:32.264752]: HES logged: false
[1970-Jan-01 01:59:32.317257]: HES logged: false
[1970-Jan-01 01:59:32.362516]: HES logged: false
[1970-Jan-01 01:59:32.389439]: HES logged: false
[1970-Jan-01 01:59:32.419852]: HES logged: false
[1970-Jan-01 01:59:32.446469]: HES logged: false
[1970-Jan-01 01:59:32.488710]: HES logged: false
[1970-Jan-01 01:59:32.517063]: HES logged: false
[1970-Jan-01 01:59:32.565345]: HES logged: false
[1970-Jan-01 01:59:32.593981]: HES logged: false
[1970-Jan-01 01:59:32.645939]: HES logged: false
[1970-Jan-01 01:59:32.672853]: HES logged: false
[1970-Jan-01 01:59:32.701111]: HES logged: false
[1970-Jan-01 01:59:32.728726]: HES logged: false
[1970-Jan-01 01:59:32.761736]: HES logged: false
[1970-Jan-01 01:59:32.810282]: HES logged: false
[1970-Jan-01 01:59:32.846200]: HES logged: false
[1970-Jan-01 01:59:32.877293]: HES logged: false
[1970-Jan-01 01:59:32.907095]: HES logged: false
[1970-Jan-01 01:59:32.934580]: HES logged: false
[1970-Jan-01 01:59:33.015332]: HES logged: false
[1970-Jan-01 01:59:33.084085]: HES logged: true
[1970-Jan-01 01:59:33.625217]: HES logged: false
[1970-Jan-01 01:59:33.658049]: HES logged: false
[1970-Jan-01 01:59:33.685442]: HES logged: false
[1970-Jan-01 01:59:33.735639]: HES logged: false
[1970-Jan-01 01:59:33.766897]: HES logged: false
[1970-Jan-01 01:59:33.795663]: HES logged: false
[1970-Jan-01 01:59:33.847551]: HES logged: false
[1970-Jan-01 01:59:33.884592]: HES logged: false
[1970-Jan-01 01:59:33.916113]: HES logged: false
[1970-Jan-01 01:59:33.943444]: HES logged: false
[1970-Jan-01 01:59:33.969093]: HES logged: false
[1970-Jan-01 01:59:33.995709]: HES logged: false
[1970-Jan-01 01:59:34.028392]: HES logged: false
[1970-Jan-01 01:59:34.054636]: HES logged: false
[1970-Jan-01 01:59:34.105367]: HES logged: false
[1970-Jan-01 01:59:34.135061]: HES logged: false
[1970-Jan-01 01:59:34.198472]: HES logged: false
[1970-Jan-01 01:59:34.299291]: HES logged: false
[1970-Jan-01 01:59:34.574289]: HES logged: false
[1970-Jan-01 01:59:34.727792]: HES logged: false
[1970-Jan-01 01:59:34.787695]: HES logged: false
[1970-Jan-01 01:59:34.966815]: HES logged: false
[1970-Jan-01 01:59:35.057874]: HES logged: false
[1970-Jan-01 01:59:35.215024]: HES logged: false
[1970-Jan-01 01:59:35.307284]: HES logged: false
[1970-Jan-01 01:59:35.341220]: HES logged: true
[1970-Jan-01 01:59:35.943234]: HES logged: false
[1970-Jan-01 01:59:35.970913]: HES logged: false
[1970-Jan-01 01:59:35.997800]: HES logged: false
[1970-Jan-01 01:59:36.026672]: HES logged: false
[1970-Jan-01 01:59:36.054763]: HES logged: false
[1970-Jan-01 01:59:36.105683]: HES logged: false
[1970-Jan-01 01:59:36.155046]: HES logged: false
[1970-Jan-01 01:59:36.185143]: HES logged: false
[1970-Jan-01 01:59:36.265814]: HES logged: false
[1970-Jan-01 01:59:36.317678]: HES logged: false
[1970-Jan-01 01:59:36.348118]: HES logged: false
[1970-Jan-01 01:59:36.378875]: HES logged: false
[1970-Jan-01 01:59:36.441439]: HES logged: false
[1970-Jan-01 01:59:36.473907]: HES logged: false
[1970-Jan-01 01:59:36.502597]: HES logged: false
[1970-Jan-01 01:59:36.530377]: HES logged: false
[1970-Jan-01 01:59:36.557539]: HES logged: false
[1970-Jan-01 01:59:36.584950]: HES logged: false
[1970-Jan-01 01:59:36.663298]: HES logged: false
[1970-Jan-01 01:59:36.694758]: HES logged: false
[1970-Jan-01 01:59:36.723093]: HES logged: false
[1970-Jan-01 01:59:36.753502]: HES logged: false
[1970-Jan-01 01:59:36.779792]: HES logged: false
[1970-Jan-01 01:59:36.807426]: HES logged: false
[1970-Jan-01 01:59:36.834337]: HES logged: false
[1970-Jan-01 01:59:36.865251]: HES logged: false
[1970-Jan-01 01:59:36.918261]: HES logged: true
[1970-Jan-01 01:59:37.443093]: HES logged: false
[1970-Jan-01 01:59:37.470816]: HES logged: false
[1970-Jan-01 01:59:37.500289]: HES logged: false
[1970-Jan-01 01:59:37.532470]: HES logged: false
[1970-Jan-01 01:59:37.560651]: HES logged: false
[1970-Jan-01 01:59:37.591076]: HES logged: false
[1970-Jan-01 01:59:37.631835]: HES logged: false
[1970-Jan-01 01:59:37.674715]: HES logged: false
[1970-Jan-01 01:59:37.726228]: HES logged: false
[1970-Jan-01 01:59:37.796931]: HES logged: false
[1970-Jan-01 01:59:37.852084]: HES logged: false
[1970-Jan-01 01:59:37.879460]: HES logged: false
[1970-Jan-01 01:59:37.929841]: HES logged: false
[1970-Jan-01 01:59:37.958108]: HES logged: false
[1970-Jan-01 01:59:37.989540]: HES logged: false
[1970-Jan-01 01:59:38.018979]: HES logged: false
[1970-Jan-01 01:59:38.045605]: HES logged: false
[1970-Jan-01 01:59:38.081458]: HES logged: false
[1970-Jan-01 01:59:38.114084]: HES logged: false
[1970-Jan-01 01:59:38.144262]: HES logged: false
[1970-Jan-01 01:59:38.189003]: HES logged: false
[1970-Jan-01 01:59:38.222095]: HES logged: false
[1970-Jan-01 01:59:38.274334]: HES logged: false
[1970-Jan-01 01:59:38.302564]: HES logged: false
[1970-Jan-01 01:59:38.330290]: HES logged: false
[1970-Jan-01 01:59:38.361950]: HES logged: false
[1970-Jan-01 01:59:38.399067]: HES logged: true
[1970-Jan-01 01:59:38.942093]: HES logged: false
[1970-Jan-01 01:59:38.969724]: HES logged: false
[1970-Jan-01 01:59:39.001277]: HES logged: false
[1970-Jan-01 01:59:39.032570]: HES logged: false
[1970-Jan-01 01:59:39.060272]: HES logged: false
[1970-Jan-01 01:59:39.085630]: HES logged: false
[1970-Jan-01 01:59:39.113473]: HES logged: false
[1970-Jan-01 01:59:39.156246]: HES logged: false
[1970-Jan-01 01:59:39.198751]: HES logged: false
[1970-Jan-01 01:59:39.226940]: HES logged: false
[1970-Jan-01 01:59:39.256107]: HES logged: false
[1970-Jan-01 01:59:39.340394]: HES logged: false
[1970-Jan-01 01:59:39.418469]: HES logged: false
[1970-Jan-01 01:59:39.467926]: HES logged: false
[1970-Jan-01 01:59:39.501936]: HES logged: false
[1970-Jan-01 01:59:39.530644]: HES logged: false
[1970-Jan-01 01:59:39.557528]: HES logged: false
[1970-Jan-01 01:59:39.588208]: HES logged: false
[1970-Jan-01 01:59:39.616739]: HES logged: false
[1970-Jan-01 01:59:39.642998]: HES logged: false
[1970-Jan-01 01:59:39.697022]: HES logged: false
[1970-Jan-01 01:59:39.730821]: HES logged: false
[1970-Jan-01 01:59:39.757634]: HES logged: false
[1970-Jan-01 01:59:39.784923]: HES logged: false
[1970-Jan-01 01:59:39.814100]: HES logged: false
[1970-Jan-01 01:59:39.840833]: HES logged: false
[1970-Jan-01 01:59:39.872944]: HES logged: false
[1970-Jan-01 01:59:39.909208]: HES logged: true
[1970-Jan-01 01:59:40.475712]: HES logged: false
[1970-Jan-01 01:59:40.505443]: HES logged: false
[1970-Jan-01 01:59:40.556745]: HES logged: false
[1970-Jan-01 01:59:40.584466]: HES logged: false
[1970-Jan-01 01:59:40.611693]: HES logged: false
[1970-Jan-01 01:59:40.642940]: HES logged: false
[1970-Jan-01 01:59:40.675117]: HES logged: false
[1970-Jan-01 01:59:40.724694]: HES logged: false
[1970-Jan-01 01:59:40.750918]: HES logged: false
[1970-Jan-01 01:59:40.788927]: HES logged: false
[1970-Jan-01 01:59:40.870663]: HES logged: false
[1970-Jan-01 01:59:40.917269]: HES logged: false
[1970-Jan-01 01:59:40.971327]: HES logged: false
[1970-Jan-01 01:59:40.997388]: HES logged: false
[1970-Jan-01 01:59:41.024997]: HES logged: false
[1970-Jan-01 01:59:41.056326]: HES logged: false
[1970-Jan-01 01:59:41.102864]: HES logged: false
[1970-Jan-01 01:59:41.132266]: HES logged: false
[1970-Jan-01 01:59:41.158699]: HES logged: false
[1970-Jan-01 01:59:41.215176]: HES logged: false
[1970-Jan-01 01:59:41.244550]: HES logged: false
[1970-Jan-01 01:59:41.271681]: HES logged: false
[1970-Jan-01 01:59:41.303395]: HES logged: false
[1970-Jan-01 01:59:41.342537]: HES logged: false
[1970-Jan-01 01:59:41.368698]: HES logged: false
[1970-Jan-01 01:59:41.394927]: HES logged: false
[1970-Jan-01 01:59:41.434229]: HES logged: true
[1970-Jan-01 01:59:41.973284]: HES logged: false
[1970-Jan-01 01:59:42.000335]: HES logged: false
[1970-Jan-01 01:59:42.031212]: HES logged: false
[1970-Jan-01 01:59:42.058666]: HES logged: false
[1970-Jan-01 01:59:42.086810]: HES logged: false
[1970-Jan-01 01:59:42.114826]: HES logged: false
[1970-Jan-01 01:59:42.146536]: HES logged: false
[1970-Jan-01 01:59:42.212261]: HES logged: false
[1970-Jan-01 01:59:42.247424]: HES logged: false
[1970-Jan-01 01:59:42.284181]: HES logged: false
[1970-Jan-01 01:59:42.311693]: HES logged: false
[1970-Jan-01 01:59:42.337999]: HES logged: false
[1970-Jan-01 01:59:42.408757]: HES logged: false
[1970-Jan-01 01:59:42.479756]: HES logged: false
[1970-Jan-01 01:59:42.528964]: HES logged: false
[1970-Jan-01 01:59:42.557117]: HES logged: false
[1970-Jan-01 01:59:42.588286]: HES logged: false
[1970-Jan-01 01:59:42.616342]: HES logged: false
[1970-Jan-01 01:59:42.644705]: HES logged: false
[1970-Jan-01 01:59:42.670567]: HES logged: false
[1970-Jan-01 01:59:42.697989]: HES logged: false
[1970-Jan-01 01:59:42.778956]: HES logged: false
[1970-Jan-01 01:59:42.805403]: HES logged: false
[1970-Jan-01 01:59:42.837998]: HES logged: false
[1970-Jan-01 01:59:42.863724]: HES logged: false
[1970-Jan-01 01:59:42.890574]: HES logged: false
[1970-Jan-01 01:59:42.918443]: HES logged: true
[1970-Jan-01 01:59:43.434439]: HES logged: false
[1970-Jan-01 01:59:43.476282]: HES logged: false
[1970-Jan-01 01:59:43.524042]: HES logged: false
[1970-Jan-01 01:59:43.561139]: HES logged: false
[1970-Jan-01 01:59:43.589445]: HES logged: false
[1970-Jan-01 01:59:43.617046]: HES logged: false
[1970-Jan-01 01:59:43.644642]: HES logged: false
[1970-Jan-01 01:59:43.681324]: HES logged: false
[1970-Jan-01 01:59:43.707671]: HES logged: false
[1970-Jan-01 01:59:43.756697]: HES logged: false
[1970-Jan-01 01:59:43.786427]: HES logged: false
[1970-Jan-01 01:59:43.817364]: HES logged: false
[1970-Jan-01 01:59:43.864787]: HES logged: false
[1970-Jan-01 01:59:43.936108]: HES logged: false
[1970-Jan-01 01:59:43.998520]: HES logged: false
[1970-Jan-01 01:59:44.042375]: HES logged: false
[1970-Jan-01 01:59:44.068902]: HES logged: false
[1970-Jan-01 01:59:44.105621]: HES logged: false
[1970-Jan-01 01:59:44.134140]: HES logged: false
[1970-Jan-01 01:59:44.165264]: HES logged: false
[1970-Jan-01 01:59:44.193784]: HES logged: false
[1970-Jan-01 01:59:44.227209]: HES logged: false
[1970-Jan-01 01:59:44.285081]: HES logged: false
[1970-Jan-01 01:59:44.314878]: HES logged: false
[1970-Jan-01 01:59:44.342717]: HES logged: false
[1970-Jan-01 01:59:44.373583]: HES logged: false
[1970-Jan-01 01:59:44.422665]: HES logged: true
[1970-Jan-01 01:59:44.965850]: HES logged: false
[1970-Jan-01 01:59:44.992822]: HES logged: false
[1970-Jan-01 01:59:45.045184]: HES logged: false
[1970-Jan-01 01:59:45.086800]: HES logged: false
[1970-Jan-01 01:59:45.114512]: HES logged: false
[1970-Jan-01 01:59:45.142327]: HES logged: false
[1970-Jan-01 01:59:45.175210]: HES logged: false
[1970-Jan-01 01:59:45.212114]: HES logged: false
[1970-Jan-01 01:59:45.238870]: HES logged: false
[1970-Jan-01 01:59:45.288508]: HES logged: false
[1970-Jan-01 01:59:45.327575]: HES logged: false
[1970-Jan-01 01:59:45.354891]: HES logged: false
[1970-Jan-01 01:59:45.382889]: HES logged: false
[1970-Jan-01 01:59:45.410799]: HES logged: false
[1970-Jan-01 01:59:45.492443]: HES logged: false
[1970-Jan-01 01:59:45.627717]: HES logged: false
[1970-Jan-01 01:59:45.760417]: HES logged: false
[1970-Jan-01 01:59:45.906034]: HES logged: false
[1970-Jan-01 01:59:46.018097]: HES logged: false
[1970-Jan-01 01:59:46.147412]: HES logged: false
[1970-Jan-01 01:59:46.194159]: HES logged: false
[1970-Jan-01 01:59:46.226746]: HES logged: false
[1970-Jan-01 01:59:46.256024]: HES logged: false
[1970-Jan-01 01:59:46.297010]: HES logged: false
[1970-Jan-01 01:59:46.333779]: HES logged: false
[1970-Jan-01 01:59:46.371547]: HES logged: true
[1970-Jan-01 01:59:46.873686]: HES logged: false
[1970-Jan-01 01:59:46.907138]: HES logged: false
[1970-Jan-01 01:59:46.938724]: HES logged: false
[1970-Jan-01 01:59:47.009477]: HES logged: false
[1970-Jan-01 01:59:47.082372]: HES logged: false
[1970-Jan-01 01:59:47.114786]: HES logged: false
[1970-Jan-01 01:59:47.141417]: HES logged: false
[1970-Jan-01 01:59:47.173399]: HES logged: false
[1970-Jan-01 01:59:47.204660]: HES logged: false
[1970-Jan-01 01:59:47.232671]: HES logged: false
[1970-Jan-01 01:59:47.282113]: HES logged: false
[1970-Jan-01 01:59:47.322984]: HES logged: false
[1970-Jan-01 01:59:47.368754]: HES logged: false
[1970-Jan-01 01:59:47.395128]: HES logged: false
[1970-Jan-01 01:59:47.429170]: HES logged: false
[1970-Jan-01 01:59:47.465600]: HES logged: false
[1970-Jan-01 01:59:47.491663]: HES logged: false
[1970-Jan-01 01:59:47.519268]: HES logged: false
[1970-Jan-01 01:59:47.549679]: HES logged: false
[1970-Jan-01 01:59:47.594401]: HES logged: false
[1970-Jan-01 01:59:47.638537]: HES logged: false
[1970-Jan-01 01:59:47.666381]: HES logged: false
[1970-Jan-01 01:59:47.697695]: HES logged: false
[1970-Jan-01 01:59:47.726085]: HES logged: false
[1970-Jan-01 01:59:47.754044]: HES logged: false
[1970-Jan-01 01:59:47.781227]: HES logged: false
[1970-Jan-01 01:59:47.843605]: HES logged: true
[1970-Jan-01 01:59:48.405675]: HES logged: false
[1970-Jan-01 01:59:48.432711]: HES logged: false
[1970-Jan-01 01:59:48.459320]: HES logged: false
[1970-Jan-01 01:59:48.486665]: HES logged: false
[1970-Jan-01 01:59:48.558328]: HES logged: false
[1970-Jan-01 01:59:48.636725]: HES logged: false
[1970-Jan-01 01:59:48.688541]: HES logged: false
[1970-Jan-01 01:59:48.716776]: HES logged: false
[1970-Jan-01 01:59:48.749233]: HES logged: false
[1970-Jan-01 01:59:48.777965]: HES logged: false
[1970-Jan-01 01:59:48.804112]: HES logged: false
[1970-Jan-01 01:59:48.836705]: HES logged: false
[1970-Jan-01 01:59:48.883891]: HES logged: false
[1970-Jan-01 01:59:48.920457]: HES logged: false
[1970-Jan-01 01:59:48.967646]: HES logged: false
[1970-Jan-01 01:59:48.998467]: HES logged: false
[1970-Jan-01 01:59:49.026620]: HES logged: false
[1970-Jan-01 01:59:49.054550]: HES logged: false
[1970-Jan-01 01:59:49.081743]: HES logged: false
[1970-Jan-01 01:59:49.112242]: HES logged: false
[1970-Jan-01 01:59:49.173498]: HES logged: false
[1970-Jan-01 01:59:49.198971]: HES logged: false
[1970-Jan-01 01:59:49.227456]: HES logged: false
[1970-Jan-01 01:59:49.256357]: HES logged: false
[1970-Jan-01 01:59:49.287227]: HES logged: false
[1970-Jan-01 01:59:49.321315]: HES logged: false
[1970-Jan-01 01:59:49.348268]: HES logged: true
[1970-Jan-01 01:59:50.024195]: HES logged: false
[1970-Jan-01 01:59:50.166056]: HES logged: false
[1970-Jan-01 01:59:50.236271]: HES logged: false
[1970-Jan-01 01:59:50.394338]: HES logged: false
[1970-Jan-01 01:59:50.498872]: HES logged: false
[1970-Jan-01 01:59:50.532585]: HES logged: false
[1970-Jan-01 01:59:50.563108]: HES logged: false
[1970-Jan-01 01:59:50.590579]: HES logged: false
[1970-Jan-01 01:59:50.694801]: HES logged: false
[1970-Jan-01 01:59:50.750653]: HES logged: false
[1970-Jan-01 01:59:50.786817]: HES logged: false
[1970-Jan-01 01:59:50.819278]: HES logged: false
[1970-Jan-01 01:59:50.846961]: HES logged: false
[1970-Jan-01 01:59:50.873663]: HES logged: false
[1970-Jan-01 01:59:50.901503]: HES logged: false
[1970-Jan-01 01:59:50.933362]: HES logged: false
[1970-Jan-01 01:59:50.968707]: HES logged: false
[1970-Jan-01 01:59:51.013938]: HES logged: false
[1970-Jan-01 01:59:51.045439]: HES logged: false
[1970-Jan-01 01:59:51.072755]: HES logged: false
[1970-Jan-01 01:59:51.101292]: HES logged: false
[1970-Jan-01 01:59:51.128458]: HES logged: false
[1970-Jan-01 01:59:51.159703]: HES logged: false
[1970-Jan-01 01:59:51.192091]: HES logged: false
[1970-Jan-01 01:59:51.271838]: HES logged: false
[1970-Jan-01 01:59:51.299515]: HES logged: true
[1970-Jan-01 01:59:51.852728]: HES logged: false
[1970-Jan-01 01:59:51.883903]: HES logged: false
[1970-Jan-01 01:59:51.916010]: HES logged: false
[1970-Jan-01 01:59:51.944222]: HES logged: false
[1970-Jan-01 01:59:51.971245]: HES logged: false
[1970-Jan-01 01:59:51.998432]: HES logged: false
[1970-Jan-01 01:59:52.054673]: HES logged: false
[1970-Jan-01 01:59:52.085569]: HES logged: false
[1970-Jan-01 01:59:52.112751]: HES logged: false
[1970-Jan-01 01:59:52.140354]: HES logged: false
[1970-Jan-01 01:59:52.166070]: HES logged: false
[1970-Jan-01 01:59:52.196815]: HES logged: false
[1970-Jan-01 01:59:52.225182]: HES logged: false
[1970-Jan-01 01:59:52.262775]: HES logged: false
[1970-Jan-01 01:59:52.302663]: HES logged: false
[1970-Jan-01 01:59:52.358836]: HES logged: false
[1970-Jan-01 01:59:52.386180]: HES logged: false
[1970-Jan-01 01:59:52.415068]: HES logged: false
[1970-Jan-01 01:59:52.452446]: HES logged: false
[1970-Jan-01 01:59:52.479583]: HES logged: false
[1970-Jan-01 01:59:52.516934]: HES logged: false
[1970-Jan-01 01:59:52.565121]: HES logged: false
[1970-Jan-01 01:59:52.595865]: HES logged: false
[1970-Jan-01 01:59:52.623515]: HES logged: false
[1970-Jan-01 01:59:52.649474]: HES logged: false
[1970-Jan-01 01:59:52.676501]: HES logged: false
[1970-Jan-01 01:59:52.708080]: HES logged: true
[1970-Jan-01 01:59:53.324192]: HES logged: false
[1970-Jan-01 01:59:53.351514]: HES logged: false
[1970-Jan-01 01:59:53.383909]: HES logged: false
[1970-Jan-01 01:59:53.428679]: HES logged: false
[1970-Jan-01 01:59:53.454921]: HES logged: false
[1970-Jan-01 01:59:53.512709]: HES logged: false
[1970-Jan-01 01:59:53.557665]: HES logged: false
[1970-Jan-01 01:59:53.585823]: HES logged: false
[1970-Jan-01 01:59:53.617154]: HES logged: false
[1970-Jan-01 01:59:53.647378]: HES logged: false
[1970-Jan-01 01:59:53.693040]: HES logged: false
[1970-Jan-01 01:59:53.720619]: HES logged: false
[1970-Jan-01 01:59:53.746989]: HES logged: false
[1970-Jan-01 01:59:53.774814]: HES logged: false
[1970-Jan-01 01:59:53.823970]: HES logged: false
[1970-Jan-01 01:59:53.851591]: HES logged: false
[1970-Jan-01 01:59:53.879184]: HES logged: false
[1970-Jan-01 01:59:53.905150]: HES logged: false
[1970-Jan-01 01:59:53.958223]: HES logged: false
[1970-Jan-01 01:59:53.985437]: HES logged: false
[1970-Jan-01 01:59:54.012547]: HES logged: false
[1970-Jan-01 01:59:54.081774]: HES logged: false
[1970-Jan-01 01:59:54.107676]: HES logged: false
[1970-Jan-01 01:59:54.134828]: HES logged: false
[1970-Jan-01 01:59:54.166718]: HES logged: false
[1970-Jan-01 01:59:54.215601]: HES logged: false
[1970-Jan-01 01:59:54.244998]: HES logged: false
[1970-Jan-01 01:59:54.273124]: HES logged: true
[1970-Jan-01 01:59:54.880703]: HES logged: false
[1970-Jan-01 01:59:54.907955]: HES logged: false
[1970-Jan-01 01:59:54.934675]: HES logged: false
[1970-Jan-01 01:59:54.961114]: HES logged: false
[1970-Jan-01 01:59:55.006963]: HES logged: false
[1970-Jan-01 01:59:55.036339]: HES logged: false
[1970-Jan-01 01:59:55.063101]: HES logged: false
[1970-Jan-01 01:59:55.090216]: HES logged: false
[1970-Jan-01 01:59:55.162641]: HES logged: false
[1970-Jan-01 01:59:55.190461]: HES logged: false
[1970-Jan-01 01:59:55.222474]: HES logged: false
[1970-Jan-01 01:59:55.267666]: HES logged: false
[1970-Jan-01 01:59:55.304516]: HES logged: false
[1970-Jan-01 01:59:55.332789]: HES logged: false
[1970-Jan-01 01:59:55.368468]: HES logged: false
[1970-Jan-01 01:59:55.413612]: HES logged: false
[1970-Jan-01 01:59:55.439768]: HES logged: false
[1970-Jan-01 01:59:55.466496]: HES logged: false
[1970-Jan-01 01:59:55.497839]: HES logged: false
[1970-Jan-01 01:59:55.542600]: HES logged: false
[1970-Jan-01 01:59:55.576214]: HES logged: false
[1970-Jan-01 01:59:55.609388]: HES logged: false
[1970-Jan-01 01:59:55.641776]: HES logged: false
[1970-Jan-01 01:59:55.710737]: HES logged: false
[1970-Jan-01 01:59:55.739002]: HES logged: false
[1970-Jan-01 01:59:55.775134]: HES logged: false
[1970-Jan-01 01:59:55.820911]: HES logged: true
[1970-Jan-01 02:00:00.155160]: GetCachedToolUsageStats called
[1970-Jan-01 02:00:00.779125]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:00:04.137495]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:00:08.046492]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:00:11.877212]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:00:13.018331]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 02:00:13.021171]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:00:13.071188]: Toolhead Abort
[1970-Jan-01 02:00:13.072950]: aborting pru with shutdown=true
[1970-Jan-01 02:00:13.075936]: Last sync period had (0,0,262146) buffer fulls due to suspend moves
[1970-Jan-01 02:00:13.077657]: Libstepper All Axis Abort
[1970-Jan-01 02:00:13.172184]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 02:00:13.173935]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:00:53.181870]: GetCachedToolUsageStats called
[1970-Jan-01 02:01:35.461269]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 02:01:35.463140]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:01:36.756802]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 02:03:19.682341]: GetCachedToolUsageStats called
[1970-Jan-01 02:03:26.495469]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:03:31.844216]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:03:34.420963]: Toolhead 0 state error: 0
[1970-Jan-01 02:03:37.910270]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:03:43.118335]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:03:48.311853]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:03:54.915895]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:04:00.779498]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:04:06.101987]: Raw HES proceeding
[1970-Jan-01 02:04:06.155417]: Got raw val 24015, saturated: true
[1970-Jan-01 02:04:06.628290]: Returning HES
[1970-Jan-01 02:04:06.629941]: Sending back val 24015, saturated true
[1970-Jan-01 02:04:06.864623]: GetCachedToolUsageStats called
[1970-Jan-01 02:04:06.909095]: Toolhead Abort
[1970-Jan-01 02:04:06.912452]: aborting pru with shutdown=true
[1970-Jan-01 02:04:06.915484]: CLEAR BUFFER FAIL! in libstepper::Abort()
[1970-Jan-01 02:04:06.917940]: Last sync period had (0,0,271074) buffer fulls due to suspend moves
[1970-Jan-01 02:04:06.919653]: Libstepper All Axis Abort
[1970-Jan-01 02:04:47.137958]: GetCachedToolUsageStats called
[1970-Jan-01 02:04:56.077566]: Heater manager Set Target Temperature to 180, index 0
[1970-Jan-01 02:04:56.080540]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:04:57.889403]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false
[1970-Jan-01 02:04:57.901708]: Load Sense Limit Method: 1
[1970-Jan-01 02:04:57.910813]: Last sync period had (0,0,271797) buffer fulls due to suspend moves
[1970-Jan-01 02:04:57.912602]: Libstepper All Axis Abort
[1970-Jan-01 02:04:58.727767]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 02:04:58.729592]: Toolhead Abort
[1970-Jan-01 02:04:58.731546]: aborting pru with shutdown=true
[1970-Jan-01 02:04:58.734485]: CLEAR BUFFER FAIL! in libstepper::Abort()
[1970-Jan-01 02:04:58.737075]: Last sync period had (0,0,271824) buffer fulls due to suspend moves
[1970-Jan-01 02:04:58.738829]: Libstepper All Axis Abort
[1970-Jan-01 02:04:58.805273]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 02:05:00.554040]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:05:00.682956]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false
[1970-Jan-01 02:05:00.684946]: Load Sense Limit Method: 0
[1970-Jan-01 02:05:00.687806]: Last sync period had (0,0,271914) buffer fulls due to suspend moves
[1970-Jan-01 02:05:00.689616]: Libstepper All Axis Abort
[1970-Jan-01 02:05:01.463126]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 02:05:01.465887]: Toolhead Abort
[1970-Jan-01 02:05:01.467949]: aborting pru with shutdown=true
[1970-Jan-01 02:05:01.470742]: Last sync period had (0,0,271941) buffer fulls due to suspend moves
[1970-Jan-01 02:05:01.473183]: Libstepper All Axis Abort
[1970-Jan-01 02:05:01.677960]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 02:05:02.247782]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 02:06:06.392859]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:06:19.538456]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false
[1970-Jan-01 02:06:19.784195]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:06:25.997561]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:06:32.274739]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:06:38.196472]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-01 02:06:38.198395]: Toolhead Abort
[1970-Jan-01 02:06:38.200304]: aborting pru with shutdown=false
[1970-Jan-01 02:06:38.203117]: Last sync period had (0,0,277203) buffer fulls due to suspend moves
[1970-Jan-01 02:06:38.204995]: Libstepper All Axis Abort
[1970-Jan-01 02:06:38.293841]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-01 02:06:38.498321]: HES logged: true
[1970-Jan-01 02:06:38.961407]: libstepper: true toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:06:47.724194]: GAP: Query->Await
[1970-Jan-01 02:06:47.737631]: TH0: Retreived step position 11403535
[1970-Jan-01 02:06:47.759840]: wait for PRU status in get position
[1970-Jan-01 02:06:47.761748]: wait for PRU status in get position
[1970-Jan-01 02:06:47.763363]: GAP: Await->Done(Query)
[1970-Jan-01 02:06:47.812921]: Changing HES sample rate. Commanded: 30Hz; clamped to 30.7143Hz (215/7)
[1970-Jan-01 02:06:47.878702]: Syncing turned true
[1970-Jan-01 02:06:47.897549]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 02:06:47.899229]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 02:06:47.961077]: Toolhead 0  ADC Error: 1
[1970-Jan-01 02:06:48.032107]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 02:06:48.033825]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 02:06:48.035501]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 02:06:48.072819]: Toolhead 0 commands idle
[1970-Jan-01 02:06:48.094123]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 02:06:48.096221]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 02:06:48.097911]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 02:06:48.099643]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 02:06:48.101521]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 02:06:48.103357]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 02:06:48.105013]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 02:06:48.106668]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 02:06:53.756507]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:06:55.205665]: Buffer stall ongoing: 8772
[1970-Jan-01 02:06:55.356965]: Buffer stall ongoing: 40764
[1970-Jan-01 02:06:55.375079]: Last sync period had (0,0,390) buffer fulls due to suspend moves
[1970-Jan-01 02:06:55.377120]: Syncing turned false
[1970-Jan-01 02:06:55.424180]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 02:06:55.425908]: Buffer stall ongoing: 44892
[1970-Jan-01 02:06:55.497287]: Toolhead 0  ADC Error: 0
[1970-Jan-01 02:06:56.551217]: HES logged: true
[1970-Jan-01 02:06:56.760931]: GetCachedToolUsageStats called
[1970-Jan-01 02:06:59.525011]: libstepper: true toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:06:59.959645]: GAP: Query->Await
[1970-Jan-01 02:06:59.975275]: TH0: Retreived step position 11665679
[1970-Jan-01 02:07:00.015931]: wait for PRU status in get position
[1970-Jan-01 02:07:00.017581]: wait for PRU status in get position
[1970-Jan-01 02:07:00.019177]: GAP: Await->Done(Query)
[1970-Jan-01 02:07:05.454186]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:07:08.041107]: Changing HES sample rate. Commanded: 215Hz; clamped to 215Hz (215/1)
[1970-Jan-01 02:14:15.821472]: GetCachedToolUsageStats called
[1970-Jan-01 02:14:22.682348]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:14:25.686335]: Last sync period had (0,0,29985) buffer fulls due to suspend moves
[1970-Jan-01 02:14:25.688139]: Syncing turned false
[1970-Jan-01 02:14:25.699493]: Toolhead Abort
[1970-Jan-01 02:14:25.701453]: aborting pru with shutdown=true
[1970-Jan-01 02:14:25.710849]: Last sync period had (0,0,29985) buffer fulls due to suspend moves
[1970-Jan-01 02:14:25.712627]: Libstepper All Axis Abort
[1970-Jan-01 02:14:25.714367]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 02:14:25.716067]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:14:25.925293]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 02:14:25.927209]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:14:26.034776]: Commanding stats update: Retract count: 100574
[1970-Jan-01 02:14:26.036477]: Toolhead 0 marked as possibly blocking!
[1970-Jan-01 02:14:26.850340]: Toolhead 0 done blocking!
[1970-Jan-01 02:14:27.006812]: GetToolUsageStats called in machine  state 0
[1970-Jan-01 02:14:27.008675]: Commanding tool usage stat retrieve
[1970-Jan-01 02:14:27.010807]: GetToolUsageState: Proceeds to 1
[1970-Jan-01 02:14:27.012418]: GetToolUsagState: Error from retrieve: 0x10a
[1970-Jan-01 02:14:27.053275]: Raw usage stats: retract 201148ct, extrusion 1000118 steps, 3736 seconds, refurbed 0 times
[1970-Jan-01 02:14:27.091239]: GetToolUsageStats called in machine  state 1
[1970-Jan-01 02:14:27.092962]: VerifyToolUsageStatsRetrieved: Done
[1970-Jan-01 02:14:27.094556]: GetToolUsageState: Proceeds to 2
[1970-Jan-01 02:14:27.174127]: GetToolUsageStats called in machine  state 2
[1970-Jan-01 02:14:27.175978]: GetToolUsageState: Done, resets
[1970-Jan-01 02:14:52.726433]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 02:14:52.728184]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:15:52.908197]: GetCachedToolUsageStats called
[1970-Jan-01 02:17:35.832271]: GetCachedToolUsageStats called
[1970-Jan-01 02:17:37.621371]: Heater manager Set Target Temperature to 180, index 0
[1970-Jan-01 02:17:37.623112]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:17:38.943403]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false
[1970-Jan-01 02:17:38.945365]: Load Sense Limit Method: 1
[1970-Jan-01 02:17:38.948703]: Last sync period had (0,0,31182) buffer fulls due to suspend moves
[1970-Jan-01 02:17:38.950831]: Libstepper All Axis Abort
[1970-Jan-01 02:17:39.699680]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 02:17:39.722399]: Toolhead Abort
[1970-Jan-01 02:17:39.724177]: aborting pru with shutdown=true
[1970-Jan-01 02:17:39.740410]: Last sync period had (0,0,31200) buffer fulls due to suspend moves
[1970-Jan-01 02:17:39.742365]: Libstepper All Axis Abort
[1970-Jan-01 02:17:39.859725]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 02:17:42.213499]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false
[1970-Jan-01 02:17:42.215718]: Load Sense Limit Method: 0
[1970-Jan-01 02:17:42.227209]: Last sync period had (0,0,31263) buffer fulls due to suspend moves
[1970-Jan-01 02:17:42.229118]: Libstepper All Axis Abort
[1970-Jan-01 02:17:43.002456]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 02:17:43.004578]: Toolhead Abort
[1970-Jan-01 02:17:43.006531]: aborting pru with shutdown=true
[1970-Jan-01 02:17:43.009243]: Last sync period had (0,0,31287) buffer fulls due to suspend moves
[1970-Jan-01 02:17:43.020679]: Libstepper All Axis Abort
[1970-Jan-01 02:17:43.076730]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 02:17:43.709718]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 02:19:06.648265]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:19:17.160358]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:19:23.089885]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false
[1970-Jan-01 02:19:29.376285]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:19:36.621057]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:19:41.817820]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-01 02:19:41.819618]: Toolhead Abort
[1970-Jan-01 02:19:41.821670]: aborting pru with shutdown=false
[1970-Jan-01 02:19:41.824200]: Last sync period had (0,0,36666) buffer fulls due to suspend moves
[1970-Jan-01 02:19:41.825923]: Libstepper All Axis Abort
[1970-Jan-01 02:19:41.871972]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-01 02:19:42.405394]: HES logged: true
[1970-Jan-01 02:19:43.652977]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:19:51.907962]: GAP: Query->Await
[1970-Jan-01 02:19:51.928242]: TH0: Retreived step position 11731215
[1970-Jan-01 02:19:51.947101]: wait for PRU status in get position
[1970-Jan-01 02:19:51.948745]: wait for PRU status in get position
[1970-Jan-01 02:19:51.950518]: GAP: Await->Done(Query)
[1970-Jan-01 02:19:51.997233]: Changing HES sample rate. Commanded: 30Hz; clamped to 30.7143Hz (215/7)
[1970-Jan-01 02:19:52.094931]: Syncing turned true
[1970-Jan-01 02:19:52.120498]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 02:19:52.122180]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 02:19:52.229823]: Toolhead 0  ADC Error: 1
[1970-Jan-01 02:19:52.363909]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 02:19:52.365620]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 02:19:52.367281]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 02:19:52.369040]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 02:19:52.370901]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 02:19:52.372547]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 02:19:52.374204]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 02:19:52.375981]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 02:19:52.377633]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 02:19:52.379258]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 02:19:52.381149]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 02:19:52.399167]: Toolhead 0 commands idle
[1970-Jan-01 02:19:59.601535]: Buffer stall ongoing: 33540
[1970-Jan-01 02:19:59.772133]: Buffer stall ongoing: 69531
[1970-Jan-01 02:19:59.830628]: Buffer stall ongoing: 81915
[1970-Jan-01 02:19:59.864309]: Last sync period had (0,0,270) buffer fulls due to suspend moves
[1970-Jan-01 02:19:59.866086]: Syncing turned false
[1970-Jan-01 02:19:59.889742]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 02:19:59.891655]: Buffer stall ongoing: 89397
[1970-Jan-01 02:20:00.010540]: Toolhead 0  ADC Error: 0
[1970-Jan-01 02:20:00.368172]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:20:01.174979]: HES logged: true
[1970-Jan-01 02:20:01.459441]: GetCachedToolUsageStats called
[1970-Jan-01 02:20:04.508148]: GAP: Query->Await
[1970-Jan-01 02:20:04.522496]: TH0: Retreived step position 11600143
[1970-Jan-01 02:20:04.539101]: wait for PRU status in get position
[1970-Jan-01 02:20:04.540983]: wait for PRU status in get position
[1970-Jan-01 02:20:04.542722]: wait for PRU status in get position
[1970-Jan-01 02:20:04.544312]: GAP: Await->Done(Query)
[1970-Jan-01 02:20:06.916948]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:20:12.466746]: Changing HES sample rate. Commanded: 215Hz; clamped to 215Hz (215/1)
[1970-Jan-01 02:20:13.188491]: GetCachedToolUsageStats called
[1970-Jan-01 02:20:13.393673]: Expecting 98616.7 steps extruded this print from 908.491 mm of plastic
[1970-Jan-01 02:20:13.883653]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 02:20:13.885548]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:20:14.011693]: Expected packet id: 0x91, Got packet id: 0x90, Full packet: 
0xf3,0x0,0x0,0x21,0x0,0xb0,0x0,0xf,0xb0,0x80,0x1,0x0,0xb4,0x0,0x0,0xac,0x97,0x3,0x4e,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x90,0xac,0x57,0x6d,0xc9,

[1970-Jan-01 02:20:14.013753]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:20:14.273084]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 02:21:20.446841]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:21:23.835773]: Expend Buffer: false
[1970-Jan-01 02:21:23.943752]: Syncing turned true
[1970-Jan-01 02:21:24.024140]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 02:21:24.025830]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 02:21:24.539850]: Toolhead 0  ADC Error: 1
[1970-Jan-01 02:21:24.771733]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 02:21:24.773555]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 02:21:24.775229]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 02:21:24.777255]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 02:21:24.778923]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 02:21:24.788376]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 02:21:24.790280]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 02:21:24.792118]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 02:21:24.793776]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 02:21:24.795422]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 02:21:24.797288]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 02:21:25.518815]: Expected packet id: 0x92, Got packet id: 0x0, Full packet: 
0x12,0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xbb,0x1a,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4e,0x1,0x0,0x0,0x0,0x0,0x1,0xf,0x0,0x92,0x96,0x5f,0x36,

[1970-Jan-01 02:21:25.521334]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:21:26.073737]: Expected packet id: 0xec, Got packet id: 0xeb, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xbb,0x1a,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4e,0x1,0x0,0x0,0x0,0x0,0x0,0x3c,0x0,0xeb,0x21,0x17,0xc3,0xa3,

[1970-Jan-01 02:21:26.075648]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:21:26.080792]: Expected packet id: 0xec, Got packet id: 0xeb, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xbb,0x1a,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4e,0x1,0x0,0x0,0x0,0x0,0x0,0x3c,0x0,0xeb,0x21,0x17,0xc3,0xa3,

[1970-Jan-01 02:21:26.082694]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 2
[1970-Jan-01 02:22:14.414474]: Expected packet id: 0x7f, Got packet id: 0x7e, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd1,0x0,0xf,0xe9,0x6e,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x82,0x0,0x7e,0xc1,0x84,0xd4,0xfd,

[1970-Jan-01 02:22:14.416828]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:22:44.440950]: Steps overrun! last 65528 and just got 8
[1970-Jan-01 02:22:44.442621]: calculated 15
[1970-Jan-01 02:22:45.396492]: Expected packet id: 0x95, Got packet id: 0x0, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0xf,0x0,0x2d,0x0,0xd7,0x0,0xf,0x0,0xe4,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4e,

[1970-Jan-01 02:22:45.398476]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:22:59.981487]: Toolhead 0 state error: 80
[1970-Jan-01 02:23:01.592675]: GetCachedToolUsageStats called
[1970-Jan-01 02:23:01.638721]: toolhead pausing
[1970-Jan-01 02:23:01.644277]: Last sync period had (0,1062,11589) buffer fulls due to suspend moves
[1970-Jan-01 02:23:01.646019]: Syncing turned false
[1970-Jan-01 02:23:01.647697]: quack pause: true
[1970-Jan-01 02:23:02.229916]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 02:23:02.347879]: Last sync period had (0,1062,11589) buffer fulls due to suspend moves
[1970-Jan-01 02:23:02.350343]: Libstepper All Axis Abort
[1970-Jan-01 02:23:02.352198]: Clear Toolhead Buffer
[1970-Jan-01 02:23:02.605073]: clear toolhead buffer acknowledged
[1970-Jan-01 02:23:02.706527]: toolhead unpausing
[1970-Jan-01 02:23:02.708203]: quack pause: false
[1970-Jan-01 02:23:02.950890]: Expend Buffer: true
[1970-Jan-01 02:23:03.035915]: Last sync period had (0,1062,11613) buffer fulls due to suspend moves
[1970-Jan-01 02:23:03.037734]: Syncing turned false
[1970-Jan-01 02:23:03.388533]: GAP: Query->Await
[1970-Jan-01 02:23:03.591580]: GAP: Await
[1970-Jan-01 02:23:03.668375]: GAP: Await
[1970-Jan-01 02:23:03.701022]: Toolhead 0  ADC Error: 0
[1970-Jan-01 02:23:03.742295]: GAP: Await
[1970-Jan-01 02:23:03.827914]: GAP: Await
[1970-Jan-01 02:23:03.961248]: GAP: Await
[1970-Jan-01 02:23:03.985113]: TH0: Retreived step position 14090511
[1970-Jan-01 02:23:04.025887]: wait for PRU status in get position
[1970-Jan-01 02:23:04.027636]: wait for PRU status in get position
[1970-Jan-01 02:23:04.029261]: GAP: Await->Done(Query)
[1970-Jan-01 02:23:04.397764]: Suspend
[1970-Jan-01 02:23:04.415450]: Suspend index 373 found, A-pos 201.185
[1970-Jan-01 02:23:10.149392]: GAP: Query->Await
[1970-Jan-01 02:23:10.231327]: GAP: Await
[1970-Jan-01 02:23:10.275064]: GAP: Await
[1970-Jan-01 02:23:10.321041]: TH0: Retreived step position 14221583
[1970-Jan-01 02:23:10.360921]: wait for PRU status in get position
[1970-Jan-01 02:23:10.362601]: wait for PRU status in get position
[1970-Jan-01 02:23:10.364303]: GAP: Await->Done(Query)
[1970-Jan-01 02:23:10.768920]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 02:23:10.791823]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:23:11.550828]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 02:23:12.186812]: GetCachedToolUsageStats called
[1970-Jan-01 02:23:16.786922]: Toolhead 0 state error: 0
[1970-Jan-01 02:23:27.252376]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:23:29.441434]: Toolhead 0 state error: 80
[1970-Jan-01 02:23:38.061868]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 02:23:38.063644]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:23:38.557431]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 02:23:39.216099]: GetCachedToolUsageStats called
[1970-Jan-01 02:23:47.350937]: Toolhead 0 state error: 0
[1970-Jan-01 02:23:50.073983]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:23:57.468034]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:24:02.989149]: TH0: 40 failures in last 4241 packets (0.943174%)
[1970-Jan-01 02:24:03.001491]: Toolhead Abort
[1970-Jan-01 02:24:03.003218]: aborting pru with shutdown=false
[1970-Jan-01 02:24:03.010834]: Last sync period had (0,1062,13014) buffer fulls due to suspend moves
[1970-Jan-01 02:24:03.012669]: Libstepper All Axis Abort
[1970-Jan-01 02:24:20.602594]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 02:24:20.604357]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:24:20.738325]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 02:24:21.432222]: Expend Buffer: false
[1970-Jan-01 02:24:21.510661]: Syncing turned true
[1970-Jan-01 02:24:21.542939]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 02:24:21.544637]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 02:24:22.094281]: Toolhead 0  ADC Error: 1
[1970-Jan-01 02:24:22.921203]: Expected packet id: 0xd4, Got packet id: 0xd7, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd9,0x0,0xf,0x72,0xc0,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,

[1970-Jan-01 02:24:22.923644]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:24:23.206250]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 02:24:23.207983]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 02:24:23.230489]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 02:24:23.232229]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 02:24:23.233884]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 02:24:23.235526]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 02:24:23.237172]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 02:24:23.238942]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 02:24:23.275455]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 02:24:23.277150]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 02:24:23.278795]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 02:24:23.837348]: Expend Buffer: false
[1970-Jan-01 02:24:37.164561]: toolhead pausing
[1970-Jan-01 02:24:37.169071]: Last sync period had (0,222,2301) buffer fulls due to suspend moves
[1970-Jan-01 02:24:37.171054]: Syncing turned false
[1970-Jan-01 02:24:37.172709]: quack pause: true
[1970-Jan-01 02:24:37.252919]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 02:24:37.254739]: PRU Event: PRU_SUSPEND_DECEL_EXECUTED(7488)
[1970-Jan-01 02:24:37.256426]: PRU Event: PRU_SUSPEND_DECEL_EXECUTED(7488)
[1970-Jan-01 02:24:37.258544]: PRU Event: PRU_SUSPEND_DECEL_EXECUTED(7488)
[1970-Jan-01 02:24:37.305793]:  axis running: 0
[1970-Jan-01 02:24:37.520570]: Last sync period had (0,222,2301) buffer fulls due to suspend moves
[1970-Jan-01 02:24:37.522778]: Libstepper All Axis Abort
[1970-Jan-01 02:24:37.524493]: Clear Toolhead Buffer
[1970-Jan-01 02:24:37.572074]: clear toolhead buffer acknowledged
[1970-Jan-01 02:24:37.699590]: toolhead unpausing
[1970-Jan-01 02:24:37.711551]: quack pause: false
[1970-Jan-01 02:24:38.003856]: Expend Buffer: true
[1970-Jan-01 02:24:38.067407]: Last sync period had (0,222,2319) buffer fulls due to suspend moves
[1970-Jan-01 02:24:38.069311]: Syncing turned false
[1970-Jan-01 02:24:38.182811]: Toolhead 0  ADC Error: 0
[1970-Jan-01 02:24:38.223592]: GAP: Query->Await
[1970-Jan-01 02:24:38.248298]: TH0: Retreived step position 14156047
[1970-Jan-01 02:24:38.305488]: wait for PRU status in get position
[1970-Jan-01 02:24:38.307146]: wait for PRU status in get position
[1970-Jan-01 02:24:38.308755]: GAP: Await->Done(Query)
[1970-Jan-01 02:24:38.406336]: Suspend
[1970-Jan-01 02:24:38.408547]: Suspend index 406 found, A-pos 216.547
[1970-Jan-01 02:24:43.431955]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:24:44.380698]: GAP: Query->Await
[1970-Jan-01 02:24:44.474450]: TH0: Retreived step position 14090511
[1970-Jan-01 02:24:44.494577]: wait for PRU status in get position
[1970-Jan-01 02:24:44.500736]: wait for PRU status in get position
[1970-Jan-01 02:24:44.502386]: GAP: Await->Done(Query)
[1970-Jan-01 02:24:59.729321]: GetCachedToolUsageStats called
[1970-Jan-01 02:25:01.203838]: toolhead pausing
[1970-Jan-01 02:25:01.221817]: Last sync period had (0,222,2763) buffer fulls due to suspend moves
[1970-Jan-01 02:25:01.223594]: Syncing turned false
[1970-Jan-01 02:25:01.225344]: quack pause: true
[1970-Jan-01 02:25:01.490780]: Last sync period had (0,222,2772) buffer fulls due to suspend moves
[1970-Jan-01 02:25:01.492903]: Libstepper All Axis Abort
[1970-Jan-01 02:25:01.494722]: Clear Toolhead Buffer
[1970-Jan-01 02:25:01.548628]: clear toolhead buffer acknowledged
[1970-Jan-01 02:25:01.631242]: toolhead unpausing
[1970-Jan-01 02:25:01.632898]: quack pause: false
[1970-Jan-01 02:25:01.835627]: Expend Buffer: true
[1970-Jan-01 02:25:01.933884]: Last sync period had (0,222,2790) buffer fulls due to suspend moves
[1970-Jan-01 02:25:01.935795]: Syncing turned false
[1970-Jan-01 02:25:02.183414]: GAP: Query->Await
[1970-Jan-01 02:25:02.211298]: TH0: Retreived step position 14090511
[1970-Jan-01 02:25:02.228156]: wait for PRU status in get position
[1970-Jan-01 02:25:02.229792]: wait for PRU status in get position
[1970-Jan-01 02:25:02.231703]: GAP: Await->Done(Query)
[1970-Jan-01 02:25:02.448857]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 02:25:02.450822]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:25:08.378876]: libstepper: true toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:25:09.144972]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 02:25:09.146711]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:25:09.216331]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 02:25:09.384205]: GetCachedToolUsageStats called
[1970-Jan-01 02:25:25.203039]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:25:30.630274]: Last sync period had (0,222,4200) buffer fulls due to suspend moves
[1970-Jan-01 02:25:30.632200]: Syncing turned false
[1970-Jan-01 02:25:30.633933]: TH0: 13 failures in last 727 packets (1.78817%)
[1970-Jan-01 02:25:30.635825]: Toolhead Abort
[1970-Jan-01 02:25:30.637488]: aborting pru with shutdown=true
[1970-Jan-01 02:25:30.650826]: Last sync period had (0,222,4200) buffer fulls due to suspend moves
[1970-Jan-01 02:25:30.652599]: Libstepper All Axis Abort
[1970-Jan-01 02:25:30.654207]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 02:25:30.655880]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:25:30.900317]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 02:25:30.902094]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:25:31.383475]: Commanding stats update: Retract count: 201160
[1970-Jan-01 02:25:31.385192]: Toolhead 0 marked as possibly blocking!
[1970-Jan-01 02:25:32.672202]: Toolhead 0 done blocking!
[1970-Jan-01 02:25:33.033578]: GetToolUsageStats called in machine  state 0
[1970-Jan-01 02:25:33.035581]: Commanding tool usage stat retrieve
[1970-Jan-01 02:25:33.037319]: GetToolUsageState: Proceeds to 1
[1970-Jan-01 02:25:33.039120]: GetToolUsagState: Error from retrieve: 0x10a
[1970-Jan-01 02:25:33.058578]: Raw usage stats: retract 402308ct, extrusion 1063872 steps, 3897 seconds, refurbed 0 times
[1970-Jan-01 02:25:33.093345]: GetToolUsageStats called in machine  state 1
[1970-Jan-01 02:25:33.095091]: VerifyToolUsageStatsRetrieved: Done
[1970-Jan-01 02:25:33.096913]: GetToolUsageState: Proceeds to 2
[1970-Jan-01 02:25:33.125086]: GetToolUsageStats called in machine  state 2
[1970-Jan-01 02:25:33.126856]: GetToolUsageState: Done, resets
[1970-Jan-01 02:25:41.758761]: GetCachedToolUsageStats called
[1970-Jan-01 02:25:43.463725]: Heater manager Set Target Temperature to 180, index 0
[1970-Jan-01 02:25:43.465606]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:25:44.781407]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false
[1970-Jan-01 02:25:44.783553]: Load Sense Limit Method: 1
[1970-Jan-01 02:25:44.790837]: Last sync period had (0,222,4359) buffer fulls due to suspend moves
[1970-Jan-01 02:25:44.792649]: Libstepper All Axis Abort
[1970-Jan-01 02:25:45.601855]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 02:25:45.603713]: Toolhead Abort
[1970-Jan-01 02:25:45.605483]: aborting pru with shutdown=true
[1970-Jan-01 02:25:45.608111]: Last sync period had (0,222,4377) buffer fulls due to suspend moves
[1970-Jan-01 02:25:45.609912]: Libstepper All Axis Abort
[1970-Jan-01 02:25:45.649519]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 02:25:47.600189]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false
[1970-Jan-01 02:25:47.602236]: Load Sense Limit Method: 0
[1970-Jan-01 02:25:47.605967]: Last sync period had (0,222,4455) buffer fulls due to suspend moves
[1970-Jan-01 02:25:47.607741]: Libstepper All Axis Abort
[1970-Jan-01 02:25:48.122493]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:25:48.353719]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 02:25:48.355551]: Toolhead Abort
[1970-Jan-01 02:25:48.357309]: aborting pru with shutdown=true
[1970-Jan-01 02:25:48.360399]: Last sync period had (0,222,4491) buffer fulls due to suspend moves
[1970-Jan-01 02:25:48.362198]: Libstepper All Axis Abort
[1970-Jan-01 02:25:48.512986]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 02:25:49.170457]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 02:26:42.742042]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:26:54.835584]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false
[1970-Jan-01 02:26:56.233763]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:27:03.772587]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:27:09.661537]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:27:13.472927]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-01 02:27:13.474722]: Toolhead Abort
[1970-Jan-01 02:27:13.476420]: aborting pru with shutdown=false
[1970-Jan-01 02:27:13.478881]: Last sync period had (0,222,8931) buffer fulls due to suspend moves
[1970-Jan-01 02:27:13.480963]: Libstepper All Axis Abort
[1970-Jan-01 02:27:13.515628]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-01 02:27:13.677773]: HES logged: true
[1970-Jan-01 02:27:23.518197]: GAP: Query->Await
[1970-Jan-01 02:27:23.562807]: TH0: Retreived step position 11337999
[1970-Jan-01 02:27:23.589654]: wait for PRU status in get position
[1970-Jan-01 02:27:23.601632]: wait for PRU status in get position
[1970-Jan-01 02:27:23.604615]: GAP: Await->Done(Query)
[1970-Jan-01 02:27:23.663397]: Changing HES sample rate. Commanded: 30Hz; clamped to 30.7143Hz (215/7)
[1970-Jan-01 02:27:23.778245]: Syncing turned true
[1970-Jan-01 02:27:23.809955]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 02:27:23.811870]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 02:27:24.026671]: Toolhead 0  ADC Error: 1
[1970-Jan-01 02:27:24.109137]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 02:27:24.111164]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 02:27:24.112873]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 02:27:24.120319]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 02:27:24.122248]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 02:27:24.129713]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 02:27:24.131665]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 02:27:24.133616]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 02:27:24.135425]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 02:27:24.137106]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 02:27:24.138779]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 02:27:24.180515]: Toolhead 0 commands idle
[1970-Jan-01 02:27:24.542091]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:27:31.054846]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:27:31.294066]: Buffer stall ongoing: 11223
[1970-Jan-01 02:27:31.422927]: Buffer stall ongoing: 38442
[1970-Jan-01 02:27:31.639817]: Buffer stall ongoing: 84237
[1970-Jan-01 02:27:31.673831]: Last sync period had (0,0,387) buffer fulls due to suspend moves
[1970-Jan-01 02:27:31.675611]: Syncing turned false
[1970-Jan-01 02:27:31.712216]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 02:27:31.713942]: Buffer stall ongoing: 91848
[1970-Jan-01 02:27:31.826929]: Toolhead 0  ADC Error: 0
[1970-Jan-01 02:27:32.868547]: HES logged: true
[1970-Jan-01 02:27:33.132505]: GetCachedToolUsageStats called
[1970-Jan-01 02:27:36.191391]: GAP: Query->Await
[1970-Jan-01 02:27:36.214939]: TH0: Retreived step position 11665679
[1970-Jan-01 02:27:36.238643]: wait for PRU status in get position
[1970-Jan-01 02:27:36.240737]: wait for PRU status in get position
[1970-Jan-01 02:27:36.244675]: GAP: Await->Done(Query)
[1970-Jan-01 02:27:39.240279]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:27:44.407084]: Changing HES sample rate. Commanded: 215Hz; clamped to 215Hz (215/1)
[1970-Jan-01 02:27:44.883954]: GetCachedToolUsageStats called
[1970-Jan-01 02:27:45.012014]: Expecting 98616.7 steps extruded this print from 908.491 mm of plastic
[1970-Jan-01 02:27:45.241826]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 02:27:45.244540]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:27:45.889222]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 02:28:43.564817]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:28:47.486573]: Expend Buffer: false
[1970-Jan-01 02:28:47.592499]: Syncing turned true
[1970-Jan-01 02:28:47.680894]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 02:28:47.686803]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 02:28:48.039984]: Toolhead 0  ADC Error: 1
[1970-Jan-01 02:28:48.272612]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 02:28:48.274304]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 02:28:48.275975]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 02:28:48.277745]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 02:28:48.279428]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 02:28:48.281515]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 02:28:48.283503]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 02:28:48.285302]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 02:28:48.286975]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 02:28:48.288627]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 02:28:48.290509]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 02:28:48.931768]: Expected packet id: 0xa9, Got packet id: 0x0, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x78,0xff,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,

[1970-Jan-01 02:28:48.933686]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:28:49.419495]: Expected packet id: 0xd1, Got packet id: 0xd0, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x78,0xff,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4e,0x1,0x0,0x0,0x0,0x0,0x0,0x3a,0x0,0xd0,0xaa,0x26,0x34,0x13,

[1970-Jan-01 02:28:49.421616]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:28:49.745447]: Expected packet id: 0xf3, Got packet id: 0xf2, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x78,0xff,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4e,0x1,0x0,0x0,0x0,0x0,0x1,0x97,0x0,0xf2,0x16,0x5a,0xdc,0xa1,

[1970-Jan-01 02:28:49.747334]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:28:49.815289]: Expected packet id: 0x3, Got packet id: 0x2, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x78,0xff,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4e,0x1,0x0,0x0,0x0,0x0,0xa,0x8d,0x0,0x2,0x6d,0x57,0x8f,0x1a,

[1970-Jan-01 02:28:49.817238]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:28:50.040835]: Expected packet id: 0x26, Got packet id: 0x25, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x78,0xff,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4e,0x1,0x0,0x0,0x0,0x0,0x8,0x3f,0x0,0x25,0xa4,0x8e,0xd8,0x84,

[1970-Jan-01 02:28:50.043078]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:28:50.173569]: Expected packet id: 0x46, Got packet id: 0xf, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x78,0xff,0x1,0x0,

[1970-Jan-01 02:28:50.175475]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:28:52.851395]: Toolhead 0 state error: 81
[1970-Jan-01 02:28:54.455149]: GetCachedToolUsageStats called
[1970-Jan-01 02:28:54.516841]: toolhead pausing
[1970-Jan-01 02:28:54.518712]: Toolhead 0 : Retry: Waited 1.65698s from state change
[1970-Jan-01 02:28:54.523558]: Last sync period had (0,249,2268) buffer fulls due to suspend moves
[1970-Jan-01 02:28:54.525449]: Syncing turned false
[1970-Jan-01 02:28:54.527087]: quack pause: true
[1970-Jan-01 02:28:54.611828]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 02:28:54.653308]:  axis running: 0
[1970-Jan-01 02:28:54.785771]:  axis running: 0
[1970-Jan-01 02:28:54.851743]:  axis running: 0
[1970-Jan-01 02:28:54.889434]:  axis running: 0
[1970-Jan-01 02:28:54.941457]:  axis running: 0
[1970-Jan-01 02:28:55.006686]:  axis running: 0
[1970-Jan-01 02:28:55.049878]:  axis running: 0
[1970-Jan-01 02:28:55.253403]:  axis running: 0
[1970-Jan-01 02:28:55.283064]: Toolhead 0 state error: 0
[1970-Jan-01 02:28:55.431191]: Last sync period had (0,249,2268) buffer fulls due to suspend moves
[1970-Jan-01 02:28:55.434088]: Libstepper All Axis Abort
[1970-Jan-01 02:28:55.435803]: Clear Toolhead Buffer
[1970-Jan-01 02:28:55.467454]: clear toolhead buffer acknowledged
[1970-Jan-01 02:28:55.523826]: toolhead unpausing
[1970-Jan-01 02:28:55.525480]: quack pause: false
[1970-Jan-01 02:28:55.595496]: Expend Buffer: true
[1970-Jan-01 02:28:55.635124]: Last sync period had (0,249,2283) buffer fulls due to suspend moves
[1970-Jan-01 02:28:55.636922]: Syncing turned false
[1970-Jan-01 02:28:55.679911]: Toolhead 0  ADC Error: 0
[1970-Jan-01 02:28:55.704999]: GAP: Query->Await
[1970-Jan-01 02:28:55.732789]: TH0: Retreived step position 14221583
[1970-Jan-01 02:28:55.753008]: wait for PRU status in get position
[1970-Jan-01 02:28:55.754663]: wait for PRU status in get position
[1970-Jan-01 02:28:55.756273]: GAP: Await->Done(Query)
[1970-Jan-01 02:28:55.909686]: Suspend
[1970-Jan-01 02:28:55.912193]: Suspend index 9 found, A-pos 14.7148
[1970-Jan-01 02:28:59.463907]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:29:01.568880]: GAP: Query->Await
[1970-Jan-01 02:29:01.597063]: TH0: Retreived step position 14287119
[1970-Jan-01 02:29:01.621133]: wait for PRU status in get position
[1970-Jan-01 02:29:01.622920]: wait for PRU status in get position
[1970-Jan-01 02:29:01.624539]: GAP: Await->Done(Query)
[1970-Jan-01 02:29:02.877280]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 02:29:02.879040]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:29:03.394207]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 02:29:06.965308]: Expend Buffer: false
[1970-Jan-01 02:29:07.023580]: Syncing turned true
[1970-Jan-01 02:29:07.062176]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 02:29:07.063892]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 02:29:07.560670]: Toolhead 0  ADC Error: 1
[1970-Jan-01 02:29:08.201310]: Expected packet id: 0x1b, Got packet id: 0x1, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xdb,0x0,0xf,0x78,0xff,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4e,0x1,0x1,0x0,0x0,0x2,0x58,

[1970-Jan-01 02:29:08.203230]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:29:08.378336]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 02:29:08.380216]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 02:29:08.382027]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 02:29:08.383735]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 02:29:08.385380]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 02:29:08.387044]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 02:29:08.388817]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 02:29:08.406843]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 02:29:08.408543]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 02:29:08.410429]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 02:29:08.412100]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 02:29:09.864446]: Expend Buffer: false
[1970-Jan-01 02:29:57.463825]: Expected packet id: 0x9e, Got packet id: 0xd7, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0xf,0x0,0x2d,0x0,0xd3,0x0,0xf,0x7c,0x57,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,

[1970-Jan-01 02:29:57.465725]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:30:03.373818]: toolhead pausing
[1970-Jan-01 02:30:03.378194]: Last sync period had (0,513,4626) buffer fulls due to suspend moves
[1970-Jan-01 02:30:03.379936]: Syncing turned false
[1970-Jan-01 02:30:03.381906]: quack pause: true
[1970-Jan-01 02:30:03.488358]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 02:30:03.528451]:  axis running: 0
[1970-Jan-01 02:30:03.596862]:  axis running: 0
[1970-Jan-01 02:30:03.687409]:  axis running: 0
[1970-Jan-01 02:30:03.785277]:  axis running: 0
[1970-Jan-01 02:30:03.987072]: PRU Event: PRU_SUSPEND_DECEL_EXECUTED(2448)
[1970-Jan-01 02:30:03.988772]: PRU Event: PRU_SUSPEND_DECEL_EXECUTED(2448)
[1970-Jan-01 02:30:04.000903]: PRU Event: PRU_SUSPEND_DECEL_EXECUTED(2448)
[1970-Jan-01 02:30:04.185147]: Last sync period had (0,513,4626) buffer fulls due to suspend moves
[1970-Jan-01 02:30:04.187375]: Libstepper All Axis Abort
[1970-Jan-01 02:30:04.189191]: Clear Toolhead Buffer
[1970-Jan-01 02:30:04.220499]: clear toolhead buffer acknowledged
[1970-Jan-01 02:30:04.328300]: toolhead unpausing
[1970-Jan-01 02:30:04.329968]: quack pause: false
[1970-Jan-01 02:30:04.473018]: Expend Buffer: true
[1970-Jan-01 02:30:04.718841]: Last sync period had (0,513,4641) buffer fulls due to suspend moves
[1970-Jan-01 02:30:04.721620]: Syncing turned false
[1970-Jan-01 02:30:04.887174]: Toolhead 0  ADC Error: 0
[1970-Jan-01 02:30:04.928267]: GAP: Query->Await
[1970-Jan-01 02:30:04.962824]: TH0: Retreived step position 13893903
[1970-Jan-01 02:30:04.992872]: wait for PRU status in get position
[1970-Jan-01 02:30:04.994530]: wait for PRU status in get position
[1970-Jan-01 02:30:04.996289]: GAP: Await->Done(Query)
[1970-Jan-01 02:30:05.173737]: Suspend
[1970-Jan-01 02:30:05.178908]: Suspend index 185 found, A-pos 113.1
[1970-Jan-01 02:30:09.545363]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:30:10.465971]: GAP: Query->Await
[1970-Jan-01 02:30:10.483280]: TH0: Retreived step position 14090511
[1970-Jan-01 02:30:10.517448]: wait for PRU status in get position
[1970-Jan-01 02:30:10.519132]: wait for PRU status in get position
[1970-Jan-01 02:30:10.525198]: GAP: Await->Done(Query)
[1970-Jan-01 02:30:59.171966]: GetCachedToolUsageStats called
[1970-Jan-01 02:31:00.650808]: toolhead pausing
[1970-Jan-01 02:31:00.655320]: Last sync period had (0,513,5499) buffer fulls due to suspend moves
[1970-Jan-01 02:31:00.657591]: Syncing turned false
[1970-Jan-01 02:31:00.659279]: quack pause: true
[1970-Jan-01 02:31:00.933311]: CLEAR BUFFER FAIL! in libstepper::Abort()
[1970-Jan-01 02:31:00.940907]: Last sync period had (0,513,5508) buffer fulls due to suspend moves
[1970-Jan-01 02:31:00.942729]: Libstepper All Axis Abort
[1970-Jan-01 02:31:00.944856]: Clear Toolhead Buffer
[1970-Jan-01 02:31:00.997346]: clear toolhead buffer acknowledged
[1970-Jan-01 02:31:01.089579]: toolhead unpausing
[1970-Jan-01 02:31:01.101788]: quack pause: false
[1970-Jan-01 02:31:01.244926]: Expend Buffer: true
[1970-Jan-01 02:31:01.341252]: Last sync period had (0,513,5526) buffer fulls due to suspend moves
[1970-Jan-01 02:31:01.343249]: Syncing turned false
[1970-Jan-01 02:31:01.679382]: GAP: Query->Await
[1970-Jan-01 02:31:01.727724]: TH0: Retreived step position 13828367
[1970-Jan-01 02:31:01.750449]: wait for PRU status in get position
[1970-Jan-01 02:31:01.752308]: wait for PRU status in get position
[1970-Jan-01 02:31:01.753940]: GAP: Await->Done(Query)
[1970-Jan-01 02:31:02.410482]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 02:31:02.412384]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:31:09.024711]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 02:31:09.026541]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:31:09.159729]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 02:31:34.252396]: GetCachedToolUsageStats called
[1970-Jan-01 02:31:46.473616]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:31:49.772860]: Toolhead 0 state error: 80
[1970-Jan-01 02:31:53.154448]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:31:55.181977]: Last sync period had (0,513,7926) buffer fulls due to suspend moves
[1970-Jan-01 02:31:55.183787]: Syncing turned false
[1970-Jan-01 02:31:55.185551]: TH0: 46 failures in last 2850 packets (1.61404%)
[1970-Jan-01 02:31:55.187617]: Toolhead Abort
[1970-Jan-01 02:31:55.189328]: aborting pru with shutdown=true
[1970-Jan-01 02:31:55.197345]: Last sync period had (0,513,7926) buffer fulls due to suspend moves
[1970-Jan-01 02:31:55.199560]: Libstepper All Axis Abort
[1970-Jan-01 02:31:55.211618]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 02:31:55.213485]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:31:55.327088]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 02:31:55.328886]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:31:55.455675]: Commanding stats update: Retract count: 402318
[1970-Jan-01 02:31:55.457409]: Toolhead 0 marked as possibly blocking!
[1970-Jan-01 02:31:57.568460]: Toolhead 0 done blocking!
[1970-Jan-01 02:31:57.711128]: GetToolUsageStats called in machine  state 0
[1970-Jan-01 02:31:57.712871]: Commanding tool usage stat retrieve
[1970-Jan-01 02:31:57.714544]: GetToolUsageState: Proceeds to 1
[1970-Jan-01 02:31:57.716316]: GetToolUsagState: Error from retrieve: 0x10a
[1970-Jan-01 02:31:57.800377]: GetToolUsageStats called in machine  state 1
[1970-Jan-01 02:31:57.841704]: GetToolUsageStats called in machine  state 1
[1970-Jan-01 02:31:57.931318]: GetToolUsageStats called in machine  state 1
[1970-Jan-01 02:31:57.977815]: GetToolUsageStats called in machine  state 1
[1970-Jan-01 02:31:58.000207]: Raw usage stats: retract 804626ct, extrusion 1087077 steps, 3960 seconds, refurbed 0 times
[1970-Jan-01 02:31:58.034168]: GetToolUsageStats called in machine  state 1
[1970-Jan-01 02:31:58.036059]: VerifyToolUsageStatsRetrieved: Done
[1970-Jan-01 02:31:58.037711]: GetToolUsageState: Proceeds to 2
[1970-Jan-01 02:31:58.230758]: GetToolUsageStats called in machine  state 2
[1970-Jan-01 02:31:58.232515]: GetToolUsageState: Done, resets
[1970-Jan-01 02:32:11.332757]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 02:32:11.334655]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:32:12.589062]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 02:32:12.841457]: GetCachedToolUsageStats called
[1970-Jan-01 02:32:21.556524]: Toolhead 0 state error: 0
[1970-Jan-01 02:32:22.094023]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:32:28.244200]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:32:34.629756]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:32:41.029078]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:32:43.783972]: Raw HES proceeding
[1970-Jan-01 02:32:43.813141]: Got raw val 24026, saturated: true
[1970-Jan-01 02:32:43.961439]: Returning HES
[1970-Jan-01 02:32:43.963105]: Sending back val 24026, saturated true
[1970-Jan-01 02:32:44.149222]: GetCachedToolUsageStats called
[1970-Jan-01 02:32:44.204011]: Toolhead Abort
[1970-Jan-01 02:32:44.206037]: aborting pru with shutdown=true
[1970-Jan-01 02:32:44.220841]: Last sync period had (0,513,9531) buffer fulls due to suspend moves
[1970-Jan-01 02:32:44.223673]: Libstepper All Axis Abort
[1970-Jan-01 02:32:53.784076]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 02:32:53.785970]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:33:09.738039]: GetCachedToolUsageStats called
[1970-Jan-01 02:33:10.886669]: Heater manager Set Target Temperature to 180, index 0
[1970-Jan-01 02:33:10.888440]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:33:12.510586]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false
[1970-Jan-01 02:33:12.522076]: Load Sense Limit Method: 1
[1970-Jan-01 02:33:12.524951]: Last sync period had (0,513,9759) buffer fulls due to suspend moves
[1970-Jan-01 02:33:12.526772]: Libstepper All Axis Abort
[1970-Jan-01 02:33:13.288034]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 02:33:13.289886]: Toolhead Abort
[1970-Jan-01 02:33:13.301757]: aborting pru with shutdown=true
[1970-Jan-01 02:33:13.304480]: Last sync period had (0,513,9777) buffer fulls due to suspend moves
[1970-Jan-01 02:33:13.306489]: Libstepper All Axis Abort
[1970-Jan-01 02:33:13.520340]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 02:33:15.455442]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false
[1970-Jan-01 02:33:15.457457]: Load Sense Limit Method: 0
[1970-Jan-01 02:33:15.460225]: Last sync period had (0,513,9855) buffer fulls due to suspend moves
[1970-Jan-01 02:33:15.462015]: Libstepper All Axis Abort
[1970-Jan-01 02:33:16.263485]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 02:33:16.265311]: Toolhead Abort
[1970-Jan-01 02:33:16.267182]: aborting pru with shutdown=true
[1970-Jan-01 02:33:16.274917]: Last sync period had (0,513,9879) buffer fulls due to suspend moves
[1970-Jan-01 02:33:16.276722]: Libstepper All Axis Abort
[1970-Jan-01 02:33:16.311512]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 02:33:17.043576]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 02:34:06.858112]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:34:16.200338]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:34:21.606497]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false
[1970-Jan-01 02:34:27.595578]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:34:35.090507]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:34:40.229517]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-01 02:34:40.232078]: Toolhead Abort
[1970-Jan-01 02:34:40.233793]: aborting pru with shutdown=false
[1970-Jan-01 02:34:40.236482]: Last sync period had (0,513,13872) buffer fulls due to suspend moves
[1970-Jan-01 02:34:40.238212]: Libstepper All Axis Abort
[1970-Jan-01 02:34:40.268982]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-01 02:34:40.493988]: HES logged: true
[1970-Jan-01 02:34:42.435025]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:34:50.361176]: GAP: Query->Await
[1970-Jan-01 02:34:50.391349]: TH0: Retreived step position 11337999
[1970-Jan-01 02:34:50.416945]: wait for PRU status in get position
[1970-Jan-01 02:34:50.418710]: wait for PRU status in get position
[1970-Jan-01 02:34:50.421525]: GAP: Await->Done(Query)
[1970-Jan-01 02:34:50.601325]: Changing HES sample rate. Commanded: 30Hz; clamped to 30.7143Hz (215/7)
[1970-Jan-01 02:34:50.724036]: Syncing turned true
[1970-Jan-01 02:34:50.795484]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 02:34:50.797453]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 02:34:50.841756]: Toolhead 0  ADC Error: 1
[1970-Jan-01 02:34:50.882116]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 02:34:50.883964]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 02:34:50.885625]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 02:34:50.887245]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 02:34:50.888885]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 02:34:50.900940]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 02:34:50.902626]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 02:34:50.904421]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 02:34:50.906062]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 02:34:50.907702]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 02:34:50.914844]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 02:34:50.942399]: Toolhead 0 commands idle
[1970-Jan-01 02:34:56.620440]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:34:58.042889]: Buffer stall ongoing: 6708
[1970-Jan-01 02:34:58.212344]: Buffer stall ongoing: 42441
[1970-Jan-01 02:34:58.229342]: Last sync period had (0,0,378) buffer fulls due to suspend moves
[1970-Jan-01 02:34:58.231708]: Syncing turned false
[1970-Jan-01 02:34:58.414301]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 02:34:58.416025]: Buffer stall ongoing: 46569
[1970-Jan-01 02:34:58.480793]: Toolhead 0  ADC Error: 0
[1970-Jan-01 02:34:59.517918]: HES logged: true
[1970-Jan-01 02:34:59.776102]: GetCachedToolUsageStats called
[1970-Jan-01 02:35:03.147934]: GAP: Query->Await
[1970-Jan-01 02:35:03.174235]: TH0: Retreived step position 11534607
[1970-Jan-01 02:35:03.191569]: wait for PRU status in get position
[1970-Jan-01 02:35:03.193345]: wait for PRU status in get position
[1970-Jan-01 02:35:03.194954]: GAP: Await->Done(Query)
[1970-Jan-01 02:35:04.913886]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:35:11.378131]: Changing HES sample rate. Commanded: 215Hz; clamped to 215Hz (215/1)
[1970-Jan-01 02:35:11.856449]: GetCachedToolUsageStats called
[1970-Jan-01 02:35:11.980668]: Expecting 98616.7 steps extruded this print from 908.491 mm of plastic
[1970-Jan-01 02:35:12.170732]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 02:35:12.173356]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:35:12.513200]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 02:36:14.107394]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:36:16.512715]: Expend Buffer: false
[1970-Jan-01 02:36:16.604832]: Syncing turned true
[1970-Jan-01 02:36:16.693469]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 02:36:16.695241]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 02:36:17.389543]: Toolhead 0  ADC Error: 1
[1970-Jan-01 02:36:17.618224]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 02:36:17.620273]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 02:36:17.621975]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 02:36:17.623650]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 02:36:17.625301]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 02:36:17.627109]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 02:36:17.628777]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 02:36:17.631015]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 02:36:17.632708]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 02:36:17.634380]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 02:36:17.636107]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 02:36:18.425209]: Expected packet id: 0x46, Got packet id: 0x45, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xd7,0xa,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4e,0x1,0x0,0x0,0x0,0x0,0x0,0xe7,0x0,0x45,0x7e,0xd5,0x61,0x61,

[1970-Jan-01 02:36:18.427233]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:36:19.030460]: Expected packet id: 0x98, Got packet id: 0x97, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xd7,0xa,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4e,0x1,0x0,0x0,0x0,0x0,0x5,0xf7,0x0,0x97,0x3d,0xf0,0x81,0xdb,

[1970-Jan-01 02:36:19.032387]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:36:19.128376]: Expected packet id: 0xad, Got packet id: 0xac, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xd7,0x43,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4e,0x1,0x0,0x0,0x0,0x0,0x0,0x60,0x0,0xac,0xd0,0x32,0x47,0x4d,

[1970-Jan-01 02:36:19.130607]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:36:56.416029]: Expected packet id: 0x1a, Got packet id: 0x19, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0xfe,0x6a,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4e,0x1,0x0,0x0,0x0,0x0,0x0,0x2f,0x0,0x19,0x91,0xb,0x76,0x51,

[1970-Jan-01 02:36:56.418196]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:36:58.769107]: Steps overrun! last 65506 and just got 3
[1970-Jan-01 02:36:58.770994]: calculated 32
[1970-Jan-01 02:37:25.549338]: Expected packet id: 0xe2, Got packet id: 0xd2, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd2,0x0,0xf,0x12,0x84,

[1970-Jan-01 02:37:25.551588]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:37:34.851432]: Expected packet id: 0xe4, Got packet id: 0xe3, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x1a,0x10,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x84,0x0,0xe3,0xda,0x27,0x3e,0x66,

[1970-Jan-01 02:37:34.853458]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:38:26.579225]: GetCachedToolUsageStats called
[1970-Jan-01 02:38:28.046406]: toolhead pausing
[1970-Jan-01 02:38:28.048322]: Toolhead 0 : Retry: Waited 1.55966s from state change
[1970-Jan-01 02:38:28.055927]: Last sync period had (0,1482,16719) buffer fulls due to suspend moves
[1970-Jan-01 02:38:28.057729]: Syncing turned false
[1970-Jan-01 02:38:28.059461]: quack pause: true
[1970-Jan-01 02:38:28.211273]: Expected packet id: 0x79, Got packet id: 0x78, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd4,0x0,0xf,0x44,0x52,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x7e,0x0,0x78,0x1d,0x45,0xfb,0xc8,

[1970-Jan-01 02:38:28.213253]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:38:28.250911]: Expected packet id: 0x82, Got packet id: 0x81, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd4,0x0,0xf,0x44,0x5a,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x3,0x72,0x0,0x81,0xcb,0x2a,0xfa,0x7f,

[1970-Jan-01 02:38:28.252890]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:38:28.274504]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 02:38:28.309696]:  axis running: 0
[1970-Jan-01 02:38:28.542724]: Last sync period had (0,1482,16719) buffer fulls due to suspend moves
[1970-Jan-01 02:38:28.546591]: Libstepper All Axis Abort
[1970-Jan-01 02:38:28.548337]: Clear Toolhead Buffer
[1970-Jan-01 02:38:28.583257]: clear toolhead buffer acknowledged
[1970-Jan-01 02:38:28.695039]: toolhead unpausing
[1970-Jan-01 02:38:28.696715]: quack pause: false
[1970-Jan-01 02:38:28.843314]: Expend Buffer: true
[1970-Jan-01 02:38:28.903430]: Last sync period had (0,1482,16734) buffer fulls due to suspend moves
[1970-Jan-01 02:38:28.905430]: Syncing turned false
[1970-Jan-01 02:38:29.077216]: Toolhead 0  ADC Error: 0
[1970-Jan-01 02:38:29.122538]: GAP: Query->Await
[1970-Jan-01 02:38:29.147518]: TH0: Retreived step position 13893903
[1970-Jan-01 02:38:29.178854]: wait for PRU status in get position
[1970-Jan-01 02:38:29.181278]: wait for PRU status in get position
[1970-Jan-01 02:38:29.182949]: GAP: Await->Done(Query)
[1970-Jan-01 02:38:29.378206]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 02:38:29.383206]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:38:37.546221]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:38:40.840537]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 02:38:40.842318]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:38:40.996607]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 02:39:04.564517]: GetCachedToolUsageStats called
[1970-Jan-01 02:39:18.818624]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:39:25.918312]: Last sync period had (0,1482,19245) buffer fulls due to suspend moves
[1970-Jan-01 02:39:25.930386]: Syncing turned false
[1970-Jan-01 02:39:25.932217]: TH0: 65 failures in last 5816 packets (1.11761%)
[1970-Jan-01 02:39:25.934133]: Toolhead Abort
[1970-Jan-01 02:39:25.935962]: aborting pru with shutdown=true
[1970-Jan-01 02:39:25.950850]: Last sync period had (0,1482,19245) buffer fulls due to suspend moves
[1970-Jan-01 02:39:25.952621]: Libstepper All Axis Abort
[1970-Jan-01 02:39:25.954227]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 02:39:25.956059]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:39:26.150853]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 02:39:26.153710]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:39:26.247366]: Commanding stats update: Retract count: 804637
[1970-Jan-01 02:39:26.249508]: Toolhead 0 marked as possibly blocking!
[1970-Jan-01 02:39:27.138174]: Toolhead 0 done blocking!
[1970-Jan-01 02:39:27.328798]: GetToolUsageStats called in machine  state 0
[1970-Jan-01 02:39:27.340901]: Commanding tool usage stat retrieve
[1970-Jan-01 02:39:27.342590]: GetToolUsageState: Proceeds to 1
[1970-Jan-01 02:39:27.344333]: GetToolUsagState: Error from retrieve: 0x10a
[1970-Jan-01 02:39:27.424854]: Raw usage stats: retract 1609263ct, extrusion 1156036 steps, 4144 seconds, refurbed 0 times
[1970-Jan-01 02:39:27.463133]: GetToolUsageStats called in machine  state 1
[1970-Jan-01 02:39:27.465980]: VerifyToolUsageStatsRetrieved: Done
[1970-Jan-01 02:39:27.467599]: GetToolUsageState: Proceeds to 2
[1970-Jan-01 02:39:27.543339]: GetToolUsageStats called in machine  state 2
[1970-Jan-01 02:39:27.545068]: GetToolUsageState: Done, resets
[1970-Jan-01 03:06:06.323288]: GetCachedToolUsageStats called
[1970-Jan-01 03:06:06.765275]: Heater manager Set Target Temperature to 180, index 0
[1970-Jan-01 03:06:06.766993]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 03:06:08.587424]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false
[1970-Jan-01 03:06:08.589397]: Load Sense Limit Method: 1
[1970-Jan-01 03:06:08.592260]: Last sync period had (0,1482,28713) buffer fulls due to suspend moves
[1970-Jan-01 03:06:08.594163]: Libstepper All Axis Abort
[1970-Jan-01 03:06:09.509229]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 03:06:09.511300]: Toolhead Abort
[1970-Jan-01 03:06:09.513025]: aborting pru with shutdown=true
[1970-Jan-01 03:06:09.515719]: Last sync period had (0,1482,28737) buffer fulls due to suspend moves
[1970-Jan-01 03:06:09.517470]: Libstepper All Axis Abort
[1970-Jan-01 03:06:09.597984]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 03:06:11.690210]: libstepper: true toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 03:06:12.098501]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false
[1970-Jan-01 03:06:12.100839]: Load Sense Limit Method: 0
[1970-Jan-01 03:06:12.103368]: Last sync period had (0,1482,28851) buffer fulls due to suspend moves
[1970-Jan-01 03:06:12.105126]: Libstepper All Axis Abort
[1970-Jan-01 03:06:12.856704]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 03:06:12.858509]: Toolhead Abort
[1970-Jan-01 03:06:12.861470]: aborting pru with shutdown=true
[1970-Jan-01 03:06:12.864077]: Last sync period had (0,1482,28887) buffer fulls due to suspend moves
[1970-Jan-01 03:06:12.865802]: Libstepper All Axis Abort
[1970-Jan-01 03:06:12.903488]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 03:06:13.475034]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 03:08:20.543802]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 03:08:34.698889]: libstepper: true toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 03:08:34.701673]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false
[1970-Jan-01 03:08:41.377447]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 03:08:46.729912]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 03:08:52.754591]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 03:08:53.316553]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-01 03:08:53.318358]: Toolhead Abort
[1970-Jan-01 03:08:53.330329]: aborting pru with shutdown=false
[1970-Jan-01 03:08:53.333093]: Last sync period had (0,1482,37935) buffer fulls due to suspend moves
[1970-Jan-01 03:08:53.334864]: Libstepper All Axis Abort
[1970-Jan-01 03:08:53.375346]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-01 03:08:53.525111]: HES logged: true
[1970-Jan-01 03:09:03.153449]: GAP: Query->Await
[1970-Jan-01 03:09:03.167248]: TH0: Retreived step position 11796751
[1970-Jan-01 03:09:03.183921]: wait for PRU status in get position
[1970-Jan-01 03:09:03.185705]: wait for PRU status in get position
[1970-Jan-01 03:09:03.187289]: GAP: Await->Done(Query)
[1970-Jan-01 03:09:03.268870]: Changing HES sample rate. Commanded: 30Hz; clamped to 30.7143Hz (215/7)
[1970-Jan-01 03:09:03.424746]: Syncing turned true
[1970-Jan-01 03:09:03.473542]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 03:09:03.475246]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 03:09:03.686022]: Toolhead 0  ADC Error: 1
[1970-Jan-01 03:09:03.732832]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 03:09:03.734529]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 03:09:03.736377]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 03:09:03.738041]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 03:09:03.750474]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 03:09:03.752216]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 03:09:03.754030]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 03:09:03.755704]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 03:09:03.759586]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 03:09:03.761837]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 03:09:03.767972]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 03:09:03.795810]: Toolhead 0 commands idle
[1970-Jan-01 03:09:06.540888]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 03:09:10.869373]: Buffer stall ongoing: 1677
[1970-Jan-01 03:09:11.051035]: Buffer stall ongoing: 39990
[1970-Jan-01 03:09:11.083499]: Last sync period had (0,0,438) buffer fulls due to suspend moves
[1970-Jan-01 03:09:11.085273]: Syncing turned false
[1970-Jan-01 03:09:11.110573]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 03:09:11.112370]: Buffer stall ongoing: 47214
[1970-Jan-01 03:09:11.198332]: Toolhead 0  ADC Error: 0
[1970-Jan-01 03:09:12.227028]: HES logged: true
[1970-Jan-01 03:09:12.491024]: GetCachedToolUsageStats called
[1970-Jan-01 03:09:13.839672]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 03:09:15.597220]: GAP: Query->Await
[1970-Jan-01 03:09:15.612790]: TH0: Retreived step position 11534607
[1970-Jan-01 03:09:15.679086]: wait for PRU status in get position
[1970-Jan-01 03:09:15.681145]: wait for PRU status in get position
[1970-Jan-01 03:09:15.682927]: GAP: Await->Done(Query)
[1970-Jan-01 03:09:19.166060]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 03:09:23.632843]: Changing HES sample rate. Commanded: 215Hz; clamped to 215Hz (215/1)
[1970-Jan-01 03:09:24.142717]: GetCachedToolUsageStats called
[1970-Jan-01 03:09:24.274279]: Expecting 98616.7 steps extruded this print from 908.491 mm of plastic
[1970-Jan-01 03:09:24.736347]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 03:09:24.738100]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 03:09:25.286507]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 03:10:34.421152]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 03:10:37.459523]: Expend Buffer: false
[1970-Jan-01 03:10:37.558241]: Syncing turned true
[1970-Jan-01 03:10:37.650604]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 03:10:37.652424]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 03:10:37.996716]: Toolhead 0  ADC Error: 1
[1970-Jan-01 03:10:38.167075]: Expected packet id: 0xe4, Got packet id: 0xe3, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x44,0x5a,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4e,0x1,0x0,0x0,0x0,0x0,0x0,0x3b,0x0,0xe3,0xbf,0x27,0xda,0x9,

[1970-Jan-01 03:10:38.169029]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 03:10:38.229816]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 03:10:38.232346]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 03:10:38.234024]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 03:10:38.235684]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 03:10:38.237346]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 03:10:38.239128]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 03:10:38.241185]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 03:10:38.242860]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 03:10:38.244507]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 03:10:38.246284]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 03:10:38.248250]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 03:10:38.570493]: Expected packet id: 0x8, Got packet id: 0x7, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x44,0x5a,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4e,0x1,0x0,0x0,0x0,0x0,0x0,0x72,0x0,0x7,0x67,0xb,0x4a,0x27,

[1970-Jan-01 03:10:38.576504]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 03:10:42.784350]: Toolhead 0 state error: 81
[1970-Jan-01 03:10:44.616025]: GetCachedToolUsageStats called
[1970-Jan-01 03:10:44.660516]: toolhead pausing
[1970-Jan-01 03:10:44.662660]: Toolhead 0 : Retry: Waited 1.86391s from state change
[1970-Jan-01 03:10:44.667247]: Last sync period had (0,255,2346) buffer fulls due to suspend moves
[1970-Jan-01 03:10:44.669123]: Syncing turned false
[1970-Jan-01 03:10:44.680928]: quack pause: true
[1970-Jan-01 03:10:44.715270]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 03:10:44.735320]:  axis running: 0
[1970-Jan-01 03:10:44.899185]:  axis running: 0
[1970-Jan-01 03:10:44.995109]:  axis running: 0
[1970-Jan-01 03:10:45.056083]:  axis running: 0
[1970-Jan-01 03:10:45.360593]: Toolhead 0 state error: 0
[1970-Jan-01 03:10:45.416074]: Last sync period had (0,255,2346) buffer fulls due to suspend moves
[1970-Jan-01 03:10:45.418782]: Libstepper All Axis Abort
[1970-Jan-01 03:10:45.430790]: Clear Toolhead Buffer
[1970-Jan-01 03:10:45.463087]: clear toolhead buffer acknowledged
[1970-Jan-01 03:10:45.573246]: toolhead unpausing
[1970-Jan-01 03:10:45.574925]: quack pause: false
[1970-Jan-01 03:10:45.671705]: Expend Buffer: true
[1970-Jan-01 03:10:45.732561]: Last sync period had (0,255,2364) buffer fulls due to suspend moves
[1970-Jan-01 03:10:45.734391]: Syncing turned false
[1970-Jan-01 03:10:45.813014]: Toolhead 0  ADC Error: 0
[1970-Jan-01 03:10:45.852000]: GAP: Query->Await
[1970-Jan-01 03:10:45.879777]: TH0: Retreived step position 14221583
[1970-Jan-01 03:10:45.903886]: wait for PRU status in get position
[1970-Jan-01 03:10:45.910338]: wait for PRU status in get position
[1970-Jan-01 03:10:45.912034]: GAP: Await->Done(Query)
[1970-Jan-01 03:10:46.019382]: Suspend
[1970-Jan-01 03:10:46.025619]: Suspend index 9 found, A-pos 14.7148
[1970-Jan-01 03:10:51.096206]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 03:10:51.700516]: GAP: Query->Await
[1970-Jan-01 03:10:51.724059]: TH0: Retreived step position 14352655
[1970-Jan-01 03:10:51.750850]: wait for PRU status in get position
[1970-Jan-01 03:10:51.752553]: wait for PRU status in get position
[1970-Jan-01 03:10:51.754182]: GAP: Await->Done(Query)
[1970-Jan-01 03:10:52.608318]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 03:10:52.620407]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 03:10:53.107034]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 03:10:57.025737]: Expend Buffer: false
[1970-Jan-01 03:10:57.123796]: Syncing turned true
[1970-Jan-01 03:10:57.192750]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 03:10:57.194455]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 03:10:57.833728]: Toolhead 0  ADC Error: 1
[1970-Jan-01 03:10:58.494049]: Expected packet id: 0x9f, Got packet id: 0x9e, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xdc,0x0,0xf,0x44,0x5a,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4e,0x1,0x1,0x0,0x0,0x2,0x59,0xcf,0x0,0x9e,0x55,0x6d,0x65,0x49,

[1970-Jan-01 03:10:58.495941]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 03:10:58.501173]: Expected packet id: 0x9f, Got packet id: 0x9e, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xdc,0x0,0xf,0x44,0x5a,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4e,0x1,0x1,0x0,0x0,0x2,0x59,0xcf,0x0,0x9e,0x55,0x6d,0x65,0x49,

[1970-Jan-01 03:10:58.503077]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 2
[1970-Jan-01 03:10:58.593234]: Expected packet id: 0xb3, Got packet id: 0x1, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xdc,0x0,0xf,0x44,0x5a,0x1,0x0,0xd7,0x0,0x0,

[1970-Jan-01 03:10:58.595133]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 03:10:58.629375]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 03:10:58.631376]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 03:10:58.633076]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 03:10:58.634872]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 03:10:58.636554]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 03:10:58.638239]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 03:10:58.639896]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 03:10:58.642050]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 03:10:58.643741]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 03:10:58.645414]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 03:10:58.647758]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 03:10:59.166204]: Expected packet id: 0x12, Got packet id: 0x11, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xdc,0x0,0xf,0x44,0x5a,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4e,0x1,0x1,0x0,0x0,0x2,0x2b,0x85,0x0,0x11,0x94,0x51,0x9b,0xf9,

[1970-Jan-01 03:10:59.168101]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 03:10:59.985238]: Expend Buffer: false
[1970-Jan-01 03:11:08.196590]: Toolhead 0 state error: 81
[1970-Jan-01 03:11:09.776760]: GetCachedToolUsageStats called
[1970-Jan-01 03:11:09.822063]: toolhead pausing
[1970-Jan-01 03:11:09.823774]: Toolhead 0 : Retry: Waited 1.62544s from state change
[1970-Jan-01 03:11:09.828479]: Last sync period had (0,228,1719) buffer fulls due to suspend moves
[1970-Jan-01 03:11:09.830823]: Syncing turned false
[1970-Jan-01 03:11:09.840246]: quack pause: true
[1970-Jan-01 03:11:09.861366]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 03:11:09.882791]:  axis running: 0
[1970-Jan-01 03:11:10.066484]:  axis running: 0
[1970-Jan-01 03:11:10.381119]:  axis running: 0
[1970-Jan-01 03:11:10.674262]: Toolhead 0 state error: 0
[1970-Jan-01 03:11:11.001234]: Last sync period had (0,228,1719) buffer fulls due to suspend moves
[1970-Jan-01 03:11:11.003750]: Libstepper All Axis Abort
[1970-Jan-01 03:11:11.005459]: Clear Toolhead Buffer
[1970-Jan-01 03:11:11.063649]: clear toolhead buffer acknowledged
[1970-Jan-01 03:11:11.319412]: toolhead unpausing
[1970-Jan-01 03:11:11.321286]: quack pause: false
[1970-Jan-01 03:11:11.603641]: Expend Buffer: true
[1970-Jan-01 03:11:11.855914]: Last sync period had (0,228,1737) buffer fulls due to suspend moves
[1970-Jan-01 03:11:11.857701]: Syncing turned false
[1970-Jan-01 03:11:11.939048]: Toolhead 0  ADC Error: 0
[1970-Jan-01 03:11:11.968468]: GAP: Query->Await
[1970-Jan-01 03:11:12.032861]: TH0: Retreived step position 14090511
[1970-Jan-01 03:11:12.055983]: wait for PRU status in get position
[1970-Jan-01 03:11:12.057612]: wait for PRU status in get position
[1970-Jan-01 03:11:12.059345]: GAP: Await->Done(Query)
[1970-Jan-01 03:11:12.984704]: Suspend
[1970-Jan-01 03:11:12.986523]: Suspend index 10 found, A-pos 15.8034
[1970-Jan-01 03:11:18.750674]: GAP: Query->Await
[1970-Jan-01 03:11:18.778059]: TH0: Retreived step position 13828367
[1970-Jan-01 03:11:18.797951]: wait for PRU status in get position
[1970-Jan-01 03:11:18.799625]: wait for PRU status in get position
[1970-Jan-01 03:11:18.801443]: GAP: Await->Done(Query)
[1970-Jan-01 03:11:19.615962]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 03:11:19.617909]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 03:11:20.103574]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 03:11:32.118742]: Expend Buffer: false
[1970-Jan-01 03:11:32.615984]: Syncing turned true
[1970-Jan-01 03:11:32.628764]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 03:11:32.630681]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 03:11:33.009222]: Toolhead 0  ADC Error: 1
[1970-Jan-01 03:11:33.589028]: Expected packet id: 0x4, Got packet id: 0x3, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0x44,0x5a,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4e,0x1,0x1,0x0,0x0,0x2,0x67,0x4c,0x0,0x3,0xb3,0x9e,0x9,0x9,

[1970-Jan-01 03:11:33.591177]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 03:11:33.596051]: Expected packet id: 0x4, Got packet id: 0x3, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0x44,0x5a,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4e,0x1,0x1,0x0,0x0,0x2,0x67,0x4c,0x0,0x3,0xb3,0x9e,0x9,0x9,

[1970-Jan-01 03:11:33.597966]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 2
[1970-Jan-01 03:11:33.772521]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 03:11:33.774243]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 03:11:33.775914]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 03:11:33.777563]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 03:11:33.779222]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 03:11:33.781367]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 03:11:33.783040]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 03:11:33.784685]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 03:11:33.786487]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 03:11:33.788151]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 03:11:33.789791]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 03:11:34.328788]: Expected packet id: 0x8c, Got packet id: 0x8b, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x44,0x5a,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4e,0x1,0x1,0x0,0x0,0x2,0x34,0xc2,0x0,0x8b,0x14,0xb,0xad,0xe0,

[1970-Jan-01 03:11:34.336816]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 03:11:35.103898]: Expend Buffer: false
[1970-Jan-01 03:11:43.433995]: Toolhead 0 state error: 81
[1970-Jan-01 03:11:45.045665]: GetCachedToolUsageStats called
[1970-Jan-01 03:11:45.099756]: toolhead pausing
[1970-Jan-01 03:11:45.101701]: Toolhead 0 : Retry: Waited 1.66596s from state change
[1970-Jan-01 03:11:45.106314]: Last sync period had (0,237,1824) buffer fulls due to suspend moves
[1970-Jan-01 03:11:45.108050]: Syncing turned false
[1970-Jan-01 03:11:45.109650]: quack pause: true
[1970-Jan-01 03:11:45.132364]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 03:11:45.152728]:  axis running: 0
[1970-Jan-01 03:11:45.325923]:  axis running: 0
[1970-Jan-01 03:11:45.420919]:  axis running: 0
[1970-Jan-01 03:11:45.478813]:  axis running: 0
[1970-Jan-01 03:11:45.730318]:  axis running: 0
[1970-Jan-01 03:11:45.800223]:  axis running: 0
[1970-Jan-01 03:11:45.904323]:  axis running: 0
[1970-Jan-01 03:11:45.947731]:  axis running: 0
[1970-Jan-01 03:11:46.009415]:  axis running: 0
[1970-Jan-01 03:11:46.073578]:  axis running: 0
[1970-Jan-01 03:11:46.122610]:  axis running: 0
[1970-Jan-01 03:11:46.182316]:  axis running: 0
[1970-Jan-01 03:11:46.222164]:  axis running: 0
[1970-Jan-01 03:11:46.279076]:  axis running: 0
[1970-Jan-01 03:11:46.334905]:  axis running: 0
[1970-Jan-01 03:11:46.405958]:  axis running: 0
[1970-Jan-01 03:11:46.488612]:  axis running: 0
[1970-Jan-01 03:11:46.561947]:  axis running: 0
[1970-Jan-01 03:11:46.603357]:  axis running: 0
[1970-Jan-01 03:11:46.659384]:  axis running: 0
[1970-Jan-01 03:11:46.759480]:  axis running: 0
[1970-Jan-01 03:11:46.812741]: Toolhead 0 state error: 0
[1970-Jan-01 03:11:46.952776]: Last sync period had (0,237,1824) buffer fulls due to suspend moves
[1970-Jan-01 03:11:46.955059]: Libstepper All Axis Abort
[1970-Jan-01 03:11:46.956896]: Clear Toolhead Buffer
[1970-Jan-01 03:11:47.000293]: clear toolhead buffer acknowledged
[1970-Jan-01 03:11:47.313853]: toolhead unpausing
[1970-Jan-01 03:11:47.315669]: quack pause: false
[1970-Jan-01 03:11:47.441483]: Expend Buffer: true
[1970-Jan-01 03:11:47.488716]: Last sync period had (0,237,1842) buffer fulls due to suspend moves
[1970-Jan-01 03:11:47.493941]: Syncing turned false
[1970-Jan-01 03:11:47.552750]: Toolhead 0  ADC Error: 0
[1970-Jan-01 03:11:47.593062]: GAP: Query->Await
[1970-Jan-01 03:11:47.615353]: TH0: Retreived step position 14156047
[1970-Jan-01 03:11:47.646583]: wait for PRU status in get position
[1970-Jan-01 03:11:47.648229]: wait for PRU status in get position
[1970-Jan-01 03:11:47.649898]: GAP: Await->Done(Query)
[1970-Jan-01 03:11:47.778823]: Suspend
[1970-Jan-01 03:11:47.780905]: Suspend index 11 found, A-pos 20.0557
[1970-Jan-01 03:11:47.963231]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 03:11:53.043158]: GAP: Query->Await
[1970-Jan-01 03:11:53.069032]: TH0: Retreived step position 14156047
[1970-Jan-01 03:11:53.099483]: wait for PRU status in get position
[1970-Jan-01 03:11:53.112526]: wait for PRU status in get position
[1970-Jan-01 03:11:53.114133]: GAP: Await->Done(Query)
[1970-Jan-01 03:11:53.898379]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 03:11:53.911168]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 03:11:54.412856]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 03:11:58.205649]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 03:11:58.480585]: Expend Buffer: false
[1970-Jan-01 03:11:58.719953]: Syncing turned true
[1970-Jan-01 03:11:58.762816]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 03:11:58.764657]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 03:11:59.152713]: Toolhead 0  ADC Error: 1
[1970-Jan-01 03:11:59.983753]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 03:11:59.985766]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 03:11:59.987556]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 03:11:59.989218]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 03:12:00.001242]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 03:12:00.002932]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 03:12:00.004717]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 03:12:00.006385]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 03:12:00.008030]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 03:12:00.009679]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 03:12:00.020671]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 03:12:01.235737]: Expend Buffer: false
[1970-Jan-01 03:12:09.004613]: Toolhead 0 state error: 81
[1970-Jan-01 03:12:10.567682]: GetCachedToolUsageStats called
[1970-Jan-01 03:12:10.614900]: toolhead pausing
[1970-Jan-01 03:12:10.616601]: Toolhead 0 : Retry: Waited 1.61023s from state change
[1970-Jan-01 03:12:10.629032]: Last sync period had (0,234,1779) buffer fulls due to suspend moves
[1970-Jan-01 03:12:10.631042]: Syncing turned false
[1970-Jan-01 03:12:10.632797]: quack pause: true
[1970-Jan-01 03:12:10.650659]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 03:12:10.761999]:  axis running: 0
[1970-Jan-01 03:12:11.284673]: Toolhead 0 state error: 0
[1970-Jan-01 03:12:11.522602]: Last sync period had (0,234,1779) buffer fulls due to suspend moves
[1970-Jan-01 03:12:11.524876]: Libstepper All Axis Abort
[1970-Jan-01 03:12:11.526591]: Clear Toolhead Buffer
[1970-Jan-01 03:12:11.568085]: clear toolhead buffer acknowledged
[1970-Jan-01 03:12:11.756087]: toolhead unpausing
[1970-Jan-01 03:12:11.757744]: quack pause: false
[1970-Jan-01 03:12:12.236699]: Expend Buffer: true
[1970-Jan-01 03:12:12.387972]: Last sync period had (0,234,1797) buffer fulls due to suspend moves
[1970-Jan-01 03:12:12.389785]: Syncing turned false
[1970-Jan-01 03:12:12.497351]: Toolhead 0  ADC Error: 0
[1970-Jan-01 03:12:12.521022]: GAP: Query->Await
[1970-Jan-01 03:12:12.546423]: TH0: Retreived step position 14156047
[1970-Jan-01 03:12:12.566523]: wait for PRU status in get position
[1970-Jan-01 03:12:12.568148]: wait for PRU status in get position
[1970-Jan-01 03:12:12.569770]: GAP: Await->Done(Query)
[1970-Jan-01 03:12:12.697587]: Suspend
[1970-Jan-01 03:12:12.699437]: Suspend index 12 found, A-pos 21.1443
[1970-Jan-01 03:12:17.663514]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 03:12:18.180303]: GAP: Query->Await
[1970-Jan-01 03:12:18.197232]: TH0: Retreived step position 14024975
[1970-Jan-01 03:12:18.220944]: wait for PRU status in get position
[1970-Jan-01 03:12:18.230825]: wait for PRU status in get position
[1970-Jan-01 03:12:18.232467]: GAP: Await->Done(Query)
[1970-Jan-01 03:15:11.969839]: Toolhead 0 state error: 56
[1970-Jan-01 03:15:13.377953]: Toolhead 0 state error: 0
[1970-Jan-01 03:25:54.581390]: Toolhead 0 state error: 80
[1970-Jan-01 03:26:03.620943]: Toolhead 0 state error: 0
[1970-Jan-01 03:26:08.012034]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 03:26:08.014239]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 03:26:08.518831]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 03:26:22.941238]: GetCachedToolUsageStats called
[1970-Jan-01 03:26:24.465318]: toolhead pausing
[1970-Jan-01 03:26:24.470359]: Last sync period had (0,234,12033) buffer fulls due to suspend moves
[1970-Jan-01 03:26:24.472135]: Syncing turned false
[1970-Jan-01 03:26:24.473760]: quack pause: true
[1970-Jan-01 03:26:24.771585]: Last sync period had (0,234,12042) buffer fulls due to suspend moves
[1970-Jan-01 03:26:24.773334]: Libstepper All Axis Abort
[1970-Jan-01 03:26:24.775190]: Clear Toolhead Buffer
[1970-Jan-01 03:26:24.813607]: clear toolhead buffer acknowledged
[1970-Jan-01 03:26:24.914808]: toolhead unpausing
[1970-Jan-01 03:26:24.916613]: quack pause: false
[1970-Jan-01 03:26:25.020832]: Expend Buffer: true
[1970-Jan-01 03:26:25.251136]: Last sync period had (0,234,12060) buffer fulls due to suspend moves
[1970-Jan-01 03:26:25.252938]: Syncing turned false
[1970-Jan-01 03:26:25.340861]: GAP: Query->Await
[1970-Jan-01 03:26:25.362184]: TH0: Retreived step position 3211535
[1970-Jan-01 03:26:25.386513]: wait for PRU status in get position
[1970-Jan-01 03:26:25.388142]: wait for PRU status in get position
[1970-Jan-01 03:26:25.389912]: GAP: Await->Done(Query)
[1970-Jan-01 03:26:25.504637]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 03:26:25.506394]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 03:26:30.958996]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 03:26:31.876148]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 03:26:31.878037]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 03:26:31.952720]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 03:29:11.138252]: GetCachedToolUsageStats called
[1970-Jan-01 03:29:26.339035]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 03:29:32.381435]: Last sync period had (0,234,21780) buffer fulls due to suspend moves
[1970-Jan-01 03:29:32.383330]: Syncing turned false
[1970-Jan-01 03:29:32.385056]: TH0: 67 failures in last 3460 packets (1.93642%)
[1970-Jan-01 03:29:32.386968]: Toolhead Abort
[1970-Jan-01 03:29:32.388766]: aborting pru with shutdown=true
[1970-Jan-01 03:29:32.401768]: Last sync period had (0,234,21780) buffer fulls due to suspend moves
[1970-Jan-01 03:29:32.403523]: Libstepper All Axis Abort
[1970-Jan-01 03:29:32.405114]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 03:29:32.406922]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 03:29:32.548122]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 03:29:32.560352]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 03:29:32.899673]: Commanding stats update: Retract count: 1609280
[1970-Jan-01 03:29:32.911823]: Toolhead 0 marked as possibly blocking!
[1970-Jan-01 03:29:33.495398]: Toolhead 0 done blocking!
[1970-Jan-01 03:29:33.574050]: GetToolUsageStats called in machine  state 0
[1970-Jan-01 03:29:33.575917]: Commanding tool usage stat retrieve
[1970-Jan-01 03:29:33.578720]: GetToolUsageState: Proceeds to 1
[1970-Jan-01 03:29:33.589020]: GetToolUsagState: Error from retrieve: 0x10a
[1970-Jan-01 03:29:33.607400]: Raw usage stats: retract 3218543ct, extrusion 1174987 steps, 4173 seconds, refurbed 0 times
[1970-Jan-01 03:29:33.627467]: GetToolUsageStats called in machine  state 1
[1970-Jan-01 03:29:33.629213]: VerifyToolUsageStatsRetrieved: Done
[1970-Jan-01 03:29:33.631168]: GetToolUsageState: Proceeds to 2
[1970-Jan-01 03:29:33.658418]: GetToolUsageStats called in machine  state 2
[1970-Jan-01 03:29:33.660350]: GetToolUsageState: Done, resets
[1970-Jan-01 05:04:46.636995]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 05:04:46.638898]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 05:04:47.906707]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 05:04:57.453260]: Toolhead 0 state error: 80
[1970-Jan-01 05:07:47.015492]: GetCachedToolUsageStats called
[1970-Jan-01 05:07:49.455927]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 05:07:53.723340]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 05:07:54.232854]: Toolhead 0 state error: 0
[1970-Jan-01 05:07:57.804151]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 05:08:03.104827]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 05:08:07.208590]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 05:08:11.878100]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 05:08:15.984540]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 05:08:21.761767]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 05:08:24.890407]: Raw HES proceeding
[1970-Jan-01 05:08:24.949242]: Got raw val 24043, saturated: true
[1970-Jan-01 05:08:25.113382]: Returning HES
[1970-Jan-01 05:08:25.115077]: Sending back val 24043, saturated true
[1970-Jan-01 05:08:25.308389]: GetCachedToolUsageStats called
[1970-Jan-01 05:08:25.374080]: Toolhead Abort
[1970-Jan-01 05:08:25.375957]: aborting pru with shutdown=true
[1970-Jan-01 05:08:25.378617]: Last sync period had (0,234,70974) buffer fulls due to suspend moves
[1970-Jan-01 05:08:25.380554]: Libstepper All Axis Abort
[1970-Jan-01 05:08:31.930931]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 05:08:31.932679]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 05:08:39.438944]: GetCachedToolUsageStats called
[1970-Jan-01 05:08:40.506112]: Heater manager Set Target Temperature to 180, index 0
[1970-Jan-01 05:08:40.507855]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 05:08:41.723419]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false
[1970-Jan-01 05:08:41.725382]: Load Sense Limit Method: 1
[1970-Jan-01 05:08:41.738996]: Last sync period had (0,234,71163) buffer fulls due to suspend moves
[1970-Jan-01 05:08:41.741124]: Libstepper All Axis Abort
[1970-Jan-01 05:08:42.467639]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 05:08:42.469447]: Toolhead Abort
[1970-Jan-01 05:08:42.481720]: aborting pru with shutdown=true
[1970-Jan-01 05:08:42.484327]: Last sync period had (0,234,71193) buffer fulls due to suspend moves
[1970-Jan-01 05:08:42.486065]: Libstepper All Axis Abort
[1970-Jan-01 05:08:42.518371]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 05:08:44.699843]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false
[1970-Jan-01 05:08:44.712144]: Load Sense Limit Method: 0
[1970-Jan-01 05:08:44.722954]: Last sync period had (0,234,71343) buffer fulls due to suspend moves
[1970-Jan-01 05:08:44.724859]: Libstepper All Axis Abort
[1970-Jan-01 05:08:45.526967]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 05:08:45.528955]: Toolhead Abort
[1970-Jan-01 05:08:45.540990]: aborting pru with shutdown=true
[1970-Jan-01 05:08:45.543880]: Last sync period had (0,234,71373) buffer fulls due to suspend moves
[1970-Jan-01 05:08:45.545677]: Libstepper All Axis Abort
[1970-Jan-01 05:08:45.645548]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 05:08:46.126655]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 05:09:36.368217]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 05:09:40.825093]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 05:09:49.161802]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 05:09:54.756778]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false
[1970-Jan-01 05:09:58.849512]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 05:10:04.291569]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 05:10:09.261321]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 05:10:13.406581]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-01 05:10:13.408404]: Toolhead Abort
[1970-Jan-01 05:10:13.410309]: aborting pru with shutdown=false
[1970-Jan-01 05:10:13.413764]: Last sync period had (0,234,77244) buffer fulls due to suspend moves
[1970-Jan-01 05:10:13.415531]: Libstepper All Axis Abort
[1970-Jan-01 05:10:13.522099]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-01 05:10:13.687677]: HES logged: true
[1970-Jan-01 05:10:14.217277]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 05:10:22.922523]: GAP: Query->Await
[1970-Jan-01 05:10:22.949287]: TH0: Retreived step position 11469071
[1970-Jan-01 05:10:22.985650]: wait for PRU status in get position
[1970-Jan-01 05:10:22.987299]: wait for PRU status in get position
[1970-Jan-01 05:10:22.989040]: GAP: Await->Done(Query)
[1970-Jan-01 05:10:23.022922]: Changing HES sample rate. Commanded: 30Hz; clamped to 30.7143Hz (215/7)
[1970-Jan-01 05:10:23.127969]: Syncing turned true
[1970-Jan-01 05:10:23.142702]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 05:10:23.144373]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 05:10:23.179003]: Toolhead 0  ADC Error: 1
[1970-Jan-01 05:10:23.232909]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 05:10:23.234580]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 05:10:23.236233]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 05:10:23.248872]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 05:10:23.250773]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 05:10:23.252535]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 05:10:23.254201]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 05:10:23.255997]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 05:10:23.257636]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 05:10:23.259281]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 05:10:23.261187]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 05:10:23.307593]: Toolhead 0 commands idle
[1970-Jan-01 05:10:26.123111]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 05:10:30.510216]: Buffer stall ongoing: 31605
[1970-Jan-01 05:10:30.546098]: Last sync period had (0,0,537) buffer fulls due to suspend moves
[1970-Jan-01 05:10:30.547917]: Syncing turned false
[1970-Jan-01 05:10:30.574027]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 05:10:30.580793]: Buffer stall ongoing: 39603
[1970-Jan-01 05:10:30.619204]: Toolhead 0  ADC Error: 0
[1970-Jan-01 05:10:30.730361]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 05:10:31.753468]: HES logged: true
[1970-Jan-01 05:10:32.024154]: GetCachedToolUsageStats called
[1970-Jan-01 05:10:35.173341]: GAP: Query->Await
[1970-Jan-01 05:10:35.186823]: TH0: Retreived step position 11796751
[1970-Jan-01 05:10:35.208065]: wait for PRU status in get position
[1970-Jan-01 05:10:35.209771]: wait for PRU status in get position
[1970-Jan-01 05:10:35.211606]: wait for PRU status in get position
[1970-Jan-01 05:10:35.213876]: GAP: Await->Done(Query)
[1970-Jan-01 05:10:36.718389]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 05:10:40.925192]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 05:10:43.273266]: Changing HES sample rate. Commanded: 215Hz; clamped to 215Hz (215/1)
[1970-Jan-01 05:10:44.152635]: GetCachedToolUsageStats called
[1970-Jan-01 05:10:44.278294]: Expecting 98616.7 steps extruded this print from 908.491 mm of plastic
[1970-Jan-01 05:10:44.563517]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 05:10:44.565268]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 05:10:44.886629]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 05:11:45.125748]: Expend Buffer: false
[1970-Jan-01 05:11:45.228996]: Syncing turned true
[1970-Jan-01 05:11:45.320633]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 05:11:45.322503]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 05:11:45.671296]: Toolhead 0  ADC Error: 1
[1970-Jan-01 05:11:45.897528]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 05:11:45.899240]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 05:11:45.901143]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 05:11:45.902925]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 05:11:45.904598]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 05:11:45.906236]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 05:11:45.907954]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 05:11:45.909757]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 05:11:45.911757]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 05:11:45.913415]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 05:11:45.915067]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 05:11:46.270377]: Expected packet id: 0x97, Got packet id: 0x96, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x87,0x62,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4e,0x1,0x0,0x0,0x0,0x0,0x0,0xfc,0x0,0x96,0xc6,0x6f,0x22,0x14,

[1970-Jan-01 05:11:46.273267]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 05:11:47.375612]: Expected packet id: 0x3e, Got packet id: 0x3d, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x87,0x62,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4e,0x1,0x0,0x0,0x0,0x0,0x1,0xad,0x0,0x3d,0x52,0xa9,0x7b,0x96,

[1970-Jan-01 05:11:47.377512]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 05:11:47.382690]: Expected packet id: 0x3e, Got packet id: 0x3d, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x87,0x62,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4e,0x1,0x0,0x0,0x0,0x0,0x1,0xad,0x0,0x3d,0x52,0xa9,0x7b,0x96,

[1970-Jan-01 05:11:47.384597]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 2
[1970-Jan-01 05:12:30.477920]: toolhead pausing
[1970-Jan-01 05:12:30.482616]: Last sync period had (0,504,4617) buffer fulls due to suspend moves
[1970-Jan-01 05:12:30.484437]: Syncing turned false
[1970-Jan-01 05:12:30.486279]: quack pause: true
[1970-Jan-01 05:12:30.549415]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 05:12:30.588884]:  axis running: 0
[1970-Jan-01 05:12:30.672649]:  axis running: 0
[1970-Jan-01 05:12:30.719531]:  axis running: 0
[1970-Jan-01 05:12:30.921720]: Last sync period had (0,504,4617) buffer fulls due to suspend moves
[1970-Jan-01 05:12:30.924132]: Libstepper All Axis Abort
[1970-Jan-01 05:12:30.925887]: Clear Toolhead Buffer
[1970-Jan-01 05:12:30.953214]: clear toolhead buffer acknowledged
[1970-Jan-01 05:12:31.024566]: toolhead unpausing
[1970-Jan-01 05:12:31.026262]: quack pause: false
[1970-Jan-01 05:12:31.128909]: Expend Buffer: true
[1970-Jan-01 05:12:31.161628]: Last sync period had (0,504,4632) buffer fulls due to suspend moves
[1970-Jan-01 05:12:31.163463]: Syncing turned false
[1970-Jan-01 05:12:31.251779]: Toolhead 0  ADC Error: 0
[1970-Jan-01 05:12:31.279489]: GAP: Query->Await
[1970-Jan-01 05:12:31.291316]: TH0: Retreived step position 13828367
[1970-Jan-01 05:12:31.325688]: wait for PRU status in get position
[1970-Jan-01 05:12:31.327353]: wait for PRU status in get position
[1970-Jan-01 05:12:31.328981]: GAP: Await->Done(Query)
[1970-Jan-01 05:12:31.479387]: Suspend
[1970-Jan-01 05:12:31.493684]: Suspend index 143 found, A-pos 103.769
[1970-Jan-01 05:12:31.713560]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 05:12:37.025865]: GAP: Query->Await
[1970-Jan-01 05:12:37.227254]: TH0: Retreived step position 13762831
[1970-Jan-01 05:12:37.268705]: wait for PRU status in get position
[1970-Jan-01 05:12:37.280857]: wait for PRU status in get position
[1970-Jan-01 05:12:37.282796]: GAP: Await->Done(Query)
[1970-Jan-01 05:13:05.808890]: GetCachedToolUsageStats called
[1970-Jan-01 05:13:07.306100]: toolhead pausing
[1970-Jan-01 05:13:07.322749]: Last sync period had (0,504,5292) buffer fulls due to suspend moves
[1970-Jan-01 05:13:07.324526]: Syncing turned false
[1970-Jan-01 05:13:07.326642]: quack pause: true
[1970-Jan-01 05:13:07.581205]: Last sync period had (0,504,5301) buffer fulls due to suspend moves
[1970-Jan-01 05:13:07.583017]: Libstepper All Axis Abort
[1970-Jan-01 05:13:07.584796]: Clear Toolhead Buffer
[1970-Jan-01 05:13:07.622749]: clear toolhead buffer acknowledged
[1970-Jan-01 05:13:07.711909]: toolhead unpausing
[1970-Jan-01 05:13:07.713619]: quack pause: false
[1970-Jan-01 05:13:07.817201]: Expend Buffer: true
[1970-Jan-01 05:13:07.875008]: Last sync period had (0,504,5316) buffer fulls due to suspend moves
[1970-Jan-01 05:13:07.876989]: Syncing turned false
[1970-Jan-01 05:13:08.018895]: GAP: Query->Await
[1970-Jan-01 05:13:08.043313]: TH0: Retreived step position 14287119
[1970-Jan-01 05:13:08.082426]: wait for PRU status in get position
[1970-Jan-01 05:13:08.084113]: wait for PRU status in get position
[1970-Jan-01 05:13:08.085738]: GAP: Await->Done(Query)
[1970-Jan-01 05:13:08.218681]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 05:13:08.230774]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 05:13:09.321686]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 05:13:14.184776]: libstepper: true toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 05:13:14.646652]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 05:13:14.648432]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 05:13:14.705799]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 05:13:14.957630]: GetCachedToolUsageStats called
[1970-Jan-01 05:13:29.702066]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 05:13:34.064741]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 05:13:36.101414]: Last sync period had (0,504,7158) buffer fulls due to suspend moves
[1970-Jan-01 05:13:36.103196]: Syncing turned false
[1970-Jan-01 05:13:36.105071]: TH0: 31 failures in last 2297 packets (1.34959%)
[1970-Jan-01 05:13:36.106987]: Toolhead Abort
[1970-Jan-01 05:13:36.108674]: aborting pru with shutdown=true
[1970-Jan-01 05:13:36.121641]: Last sync period had (0,504,7158) buffer fulls due to suspend moves
[1970-Jan-01 05:13:36.123546]: Libstepper All Axis Abort
[1970-Jan-01 05:13:36.125141]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 05:13:36.126831]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 05:13:36.258430]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 05:13:36.264433]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 05:13:36.348557]: Commanding stats update: Retract count: 3218549
[1970-Jan-01 05:13:36.360704]: Toolhead 0 marked as possibly blocking!
[1970-Jan-01 05:13:36.926849]: Toolhead 0 done blocking!
[1970-Jan-01 05:13:37.014664]: GetToolUsageStats called in machine  state 0
[1970-Jan-01 05:13:37.016419]: Commanding tool usage stat retrieve
[1970-Jan-01 05:13:37.018391]: GetToolUsageState: Proceeds to 1
[1970-Jan-01 05:13:37.020327]: GetToolUsagState: Error from retrieve: 0x10a
[1970-Jan-01 05:13:37.032888]: Raw usage stats: retract 6437092ct, extrusion 1226798 steps, 4278 seconds, refurbed 0 times
[1970-Jan-01 05:13:37.051905]: GetToolUsageStats called in machine  state 1
[1970-Jan-01 05:13:37.053646]: VerifyToolUsageStatsRetrieved: Done
[1970-Jan-01 05:13:37.055323]: GetToolUsageState: Proceeds to 2
[1970-Jan-01 05:13:37.081942]: GetToolUsageStats called in machine  state 2
[1970-Jan-01 05:13:37.083825]: GetToolUsageState: Done, resets
[1970-Jan-01 05:13:42.242829]: Toolhead 0 state error: 80
[1970-Jan-01 05:13:59.904612]: Toolhead 0 state error: 0
[1970-Jan-01 05:14:59.637711]: GetCachedToolUsageStats called
[1970-Jan-01 05:15:02.372650]: Heater manager Set Target Temperature to 180, index 0
[1970-Jan-01 05:15:02.374447]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 05:15:03.516150]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false
[1970-Jan-01 05:15:03.518107]: Load Sense Limit Method: 1
[1970-Jan-01 05:15:03.520740]: Last sync period had (0,504,7797) buffer fulls due to suspend moves
[1970-Jan-01 05:15:03.522588]: Libstepper All Axis Abort
[1970-Jan-01 05:15:04.366553]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 05:15:04.368500]: Toolhead Abort
[1970-Jan-01 05:15:04.370421]: aborting pru with shutdown=true
[1970-Jan-01 05:15:04.374138]: Last sync period had (0,504,7830) buffer fulls due to suspend moves
[1970-Jan-01 05:15:04.375947]: Libstepper All Axis Abort
[1970-Jan-01 05:15:04.409702]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 05:15:06.267625]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false
[1970-Jan-01 05:15:06.269612]: Load Sense Limit Method: 0
[1970-Jan-01 05:15:06.272405]: Last sync period had (0,504,7968) buffer fulls due to suspend moves
[1970-Jan-01 05:15:06.274289]: Libstepper All Axis Abort
[1970-Jan-01 05:15:07.071832]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 05:15:07.073787]: Toolhead Abort
[1970-Jan-01 05:15:07.075506]: aborting pru with shutdown=true
[1970-Jan-01 05:15:07.078764]: Last sync period had (0,504,8010) buffer fulls due to suspend moves
[1970-Jan-01 05:15:07.080855]: Libstepper All Axis Abort
[1970-Jan-01 05:15:07.112831]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 05:15:07.707267]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 05:15:39.383071]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 05:15:43.553855]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 05:15:50.220884]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 05:15:56.735444]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false
[1970-Jan-01 05:15:58.341440]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 05:16:02.203976]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 05:16:07.202507]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 05:16:12.212896]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 05:16:15.362443]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-01 05:16:15.364241]: Toolhead Abort
[1970-Jan-01 05:16:15.370194]: aborting pru with shutdown=false
[1970-Jan-01 05:16:15.373602]: Last sync period had (0,504,13467) buffer fulls due to suspend moves
[1970-Jan-01 05:16:15.375494]: Libstepper All Axis Abort
[1970-Jan-01 05:16:15.421024]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-01 05:16:15.576697]: HES logged: true
[1970-Jan-01 05:16:20.678807]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 05:16:24.916728]: GAP: Query->Await
[1970-Jan-01 05:16:24.934465]: TH0: Retreived step position 11796751
[1970-Jan-01 05:16:24.958150]: wait for PRU status in get position
[1970-Jan-01 05:16:24.959848]: wait for PRU status in get position
[1970-Jan-01 05:16:24.966346]: GAP: Await->Done(Query)
[1970-Jan-01 05:16:25.006789]: Changing HES sample rate. Commanded: 30Hz; clamped to 30.7143Hz (215/7)
[1970-Jan-01 05:16:25.086450]: Syncing turned true
[1970-Jan-01 05:16:25.105600]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 05:16:25.108429]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 05:16:25.158714]: Toolhead 0  ADC Error: 1
[1970-Jan-01 05:16:25.251879]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 05:16:25.253580]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 05:16:25.255289]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 05:16:25.257137]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 05:16:25.258839]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 05:16:25.270870]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 05:16:25.272620]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 05:16:25.274470]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 05:16:25.276174]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 05:16:25.277881]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 05:16:25.279578]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 05:16:25.318308]: Toolhead 0 commands idle
[1970-Jan-01 05:16:29.785005]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 05:16:32.397578]: Buffer stall ongoing: 4773
[1970-Jan-01 05:16:32.556481]: Buffer stall ongoing: 38184
[1970-Jan-01 05:16:32.592682]: Last sync period had (0,0,522) buffer fulls due to suspend moves
[1970-Jan-01 05:16:32.595554]: Syncing turned false
[1970-Jan-01 05:16:32.622959]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 05:16:32.624709]: Buffer stall ongoing: 46440
[1970-Jan-01 05:16:32.663519]: Toolhead 0  ADC Error: 0
[1970-Jan-01 05:16:33.882813]: HES logged: true
[1970-Jan-01 05:16:34.140598]: GetCachedToolUsageStats called
[1970-Jan-01 05:16:35.374812]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 05:16:37.285158]: GAP: Query->Await
[1970-Jan-01 05:16:37.315543]: TH0: Retreived step position 11534607
[1970-Jan-01 05:16:37.333550]: wait for PRU status in get position
[1970-Jan-01 05:16:37.335231]: wait for PRU status in get position
[1970-Jan-01 05:16:37.336857]: GAP: Await->Done(Query)
[1970-Jan-01 05:16:40.345948]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 05:16:44.559243]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 05:16:45.278651]: Changing HES sample rate. Commanded: 215Hz; clamped to 215Hz (215/1)
[1970-Jan-01 05:16:45.738175]: GetCachedToolUsageStats called
[1970-Jan-01 05:16:45.875111]: Expecting 187741 steps extruded this print from 1729.54 mm of plastic
[1970-Jan-01 05:16:46.120397]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 05:16:46.122183]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 05:16:46.282699]: bronx lowest mem space: 0x346 bytes
[1970-Jan-01 05:16:46.453017]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 05:17:57.144063]: Expend Buffer: false
[1970-Jan-01 05:17:57.237386]: Syncing turned true
[1970-Jan-01 05:17:57.324945]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 05:17:57.326615]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 05:17:57.696000]: Toolhead 0  ADC Error: 1
[1970-Jan-01 05:17:57.906095]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 05:17:57.907776]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 05:17:57.909432]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 05:17:57.911602]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 05:17:57.913235]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 05:17:57.914876]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 05:17:57.916532]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 05:17:57.918293]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 05:17:57.919934]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 05:17:57.921793]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 05:17:57.927581]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 05:18:02.399803]: Toolhead 0 state error: 81
[1970-Jan-01 05:18:03.975523]: GetCachedToolUsageStats called
[1970-Jan-01 05:18:04.028195]: toolhead pausing
[1970-Jan-01 05:18:04.029986]: Toolhead 0 : Retry: Waited 1.6282s from state change
[1970-Jan-01 05:18:04.035517]: Last sync period had (0,363,2430) buffer fulls due to suspend moves
[1970-Jan-01 05:18:04.037256]: Syncing turned false
[1970-Jan-01 05:18:04.038901]: quack pause: true
[1970-Jan-01 05:18:04.088840]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 05:18:04.108919]:  axis running: 0
[1970-Jan-01 05:18:04.492086]:  axis running: 0
[1970-Jan-01 05:18:04.644495]:  axis running: 0
[1970-Jan-01 05:18:04.879003]:  axis running: 0
[1970-Jan-01 05:18:05.069161]:  axis running: 0
[1970-Jan-01 05:18:05.132270]:  axis running: 0
[1970-Jan-01 05:18:05.154486]: Toolhead 0 state error: 0
[1970-Jan-01 05:18:05.276887]: Last sync period had (0,363,2430) buffer fulls due to suspend moves
[1970-Jan-01 05:18:05.279452]: Libstepper All Axis Abort
[1970-Jan-01 05:18:05.285915]: Clear Toolhead Buffer
[1970-Jan-01 05:18:05.387052]: clear toolhead buffer acknowledged
[1970-Jan-01 05:18:05.461770]: toolhead unpausing
[1970-Jan-01 05:18:05.463430]: quack pause: false
[1970-Jan-01 05:18:05.655136]: Expend Buffer: true
[1970-Jan-01 05:18:05.717464]: Last sync period had (0,363,2448) buffer fulls due to suspend moves
[1970-Jan-01 05:18:05.719304]: Syncing turned false
[1970-Jan-01 05:18:05.809259]: Toolhead 0  ADC Error: 0
[1970-Jan-01 05:18:05.839154]: GAP: Query->Await
[1970-Jan-01 05:18:05.862854]: TH0: Retreived step position 14221583
[1970-Jan-01 05:18:05.899978]: wait for PRU status in get position
[1970-Jan-01 05:18:05.901859]: wait for PRU status in get position
[1970-Jan-01 05:18:05.903480]: GAP: Await->Done(Query)
[1970-Jan-01 05:18:05.997974]: Suspend
[1970-Jan-01 05:18:05.999968]: Suspend index 24 found, A-pos 15.6181
[1970-Jan-01 05:18:07.693254]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 05:18:11.929201]: GAP: Query->Await
[1970-Jan-01 05:18:11.975831]: TH0: Retreived step position 14287119
[1970-Jan-01 05:18:12.061541]: wait for PRU status in get position
[1970-Jan-01 05:18:12.063328]: wait for PRU status in get position
[1970-Jan-01 05:18:12.064913]: GAP: Await->Done(Query)
[1970-Jan-01 05:18:12.790756]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 05:18:12.792646]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 05:18:13.325410]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 05:18:16.270485]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 05:18:17.382751]: Expend Buffer: false
[1970-Jan-01 05:18:17.442947]: Syncing turned true
[1970-Jan-01 05:18:17.456229]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 05:18:17.458033]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 05:18:17.778392]: Toolhead 0  ADC Error: 1
[1970-Jan-01 05:18:18.570726]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 05:18:18.572402]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 05:18:18.574052]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 05:18:18.575697]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 05:18:18.577487]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 05:18:18.579140]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 05:18:18.581139]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 05:18:18.582864]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 05:18:18.584653]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 05:18:18.586610]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 05:18:18.588282]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 05:18:18.656167]: Expected packet id: 0xd4, Got packet id: 0xd3, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xdb,0x0,0xf,0xb2,0xfa,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x0,0x0,0x0,0x2,0xcc,0x7c,0x0,0xd3,0x25,0xc7,0xf9,0xfa,

[1970-Jan-01 05:18:18.658037]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 05:18:18.716201]: Expected packet id: 0xe1, Got packet id: 0xe0, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xdb,0x0,0xf,0xb2,0xfa,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x0,0x0,0x0,0x2,0xc8,0x5c,0x0,0xe0,0x2d,0x38,0x49,0x5b,

[1970-Jan-01 05:18:18.718171]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 05:18:19.874437]: Expend Buffer: false
[1970-Jan-01 05:18:29.956411]: Toolhead 0 state error: 81
[1970-Jan-01 05:18:31.552163]: GetCachedToolUsageStats called
[1970-Jan-01 05:18:31.607112]: toolhead pausing
[1970-Jan-01 05:18:31.608976]: Toolhead 0 : Retry: Waited 1.6508s from state change
[1970-Jan-01 05:18:31.613802]: Last sync period had (0,267,1626) buffer fulls due to suspend moves
[1970-Jan-01 05:18:31.615719]: Syncing turned false
[1970-Jan-01 05:18:31.617365]: quack pause: true
[1970-Jan-01 05:18:31.634568]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 05:18:31.734053]:  axis running: 0
[1970-Jan-01 05:18:31.821352]:  axis running: 0
[1970-Jan-01 05:18:31.882719]:  axis running: 0
[1970-Jan-01 05:18:31.944751]:  axis running: 0
[1970-Jan-01 05:18:31.999835]:  axis running: 0
[1970-Jan-01 05:18:32.045395]:  axis running: 0
[1970-Jan-01 05:18:32.070963]: Toolhead 0 state error: 0
[1970-Jan-01 05:18:32.176298]: Last sync period had (0,267,1626) buffer fulls due to suspend moves
[1970-Jan-01 05:18:32.178951]: Libstepper All Axis Abort
[1970-Jan-01 05:18:32.185512]: Clear Toolhead Buffer
[1970-Jan-01 05:18:32.203355]: clear toolhead buffer acknowledged
[1970-Jan-01 05:18:32.319924]: toolhead unpausing
[1970-Jan-01 05:18:32.321815]: quack pause: false
[1970-Jan-01 05:18:32.426655]: Expend Buffer: true
[1970-Jan-01 05:18:32.462763]: Last sync period had (0,267,1644) buffer fulls due to suspend moves
[1970-Jan-01 05:18:32.464722]: Syncing turned false
[1970-Jan-01 05:18:32.550450]: Toolhead 0  ADC Error: 0
[1970-Jan-01 05:18:32.571337]: GAP: Query->Await
[1970-Jan-01 05:18:32.588729]: TH0: Retreived step position 14221583
[1970-Jan-01 05:18:32.619820]: wait for PRU status in get position
[1970-Jan-01 05:18:32.631952]: wait for PRU status in get position
[1970-Jan-01 05:18:32.633570]: GAP: Await->Done(Query)
[1970-Jan-01 05:18:32.723296]: Suspend
[1970-Jan-01 05:18:32.725023]: Suspend index 25 found, A-pos 16.3545
[1970-Jan-01 05:18:38.048527]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 05:18:38.590766]: GAP: Query->Await
[1970-Jan-01 05:18:38.613531]: TH0: Retreived step position 14090511
[1970-Jan-01 05:18:38.638547]: wait for PRU status in get position
[1970-Jan-01 05:18:38.640497]: wait for PRU status in get position
[1970-Jan-01 05:18:38.642601]: GAP: Await->Done(Query)
[1970-Jan-01 05:18:39.438152]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 05:18:39.441408]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 05:18:39.928448]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 05:18:43.993203]: Expend Buffer: false
[1970-Jan-01 05:18:44.047175]: Syncing turned true
[1970-Jan-01 05:18:44.080494]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 05:18:44.082207]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 05:18:44.436218]: Toolhead 0  ADC Error: 1
[1970-Jan-01 05:18:45.040999]: Expected packet id: 0x9, Got packet id: 0x8, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0xb2,0xfa,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x0,0x0,0x0,0x2,0xe1,0x6a,0x0,0x8,0x93,0x46,0x6b,0xdb,

[1970-Jan-01 05:18:45.043207]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 05:18:45.157727]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 05:18:45.159455]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 05:18:45.161469]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 05:18:45.163130]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 05:18:45.164771]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 05:18:45.166407]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 05:18:45.168039]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 05:18:45.169821]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 05:18:45.171677]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 05:18:45.173328]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 05:18:45.175038]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 05:18:45.880928]: Expected packet id: 0xa2, Got packet id: 0xa1, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd4,0x0,0xf,0xb2,0xfa,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x0,0x0,0x0,0x2,0xa7,0xa9,0x0,0xa1,0x8a,0xa9,0xb5,0xbb,

[1970-Jan-01 05:18:45.882833]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 05:18:46.382942]: Expend Buffer: false
[1970-Jan-01 05:18:56.689994]: Toolhead 0 state error: 81
[1970-Jan-01 05:18:58.278426]: GetCachedToolUsageStats called
[1970-Jan-01 05:18:58.330381]: toolhead pausing
[1970-Jan-01 05:18:58.332086]: Toolhead 0 : Retry: Waited 1.64014s from state change
[1970-Jan-01 05:18:58.336543]: Last sync period had (0,264,1617) buffer fulls due to suspend moves
[1970-Jan-01 05:18:58.338255]: Syncing turned false
[1970-Jan-01 05:18:58.339869]: quack pause: true
[1970-Jan-01 05:18:58.363039]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 05:18:58.384090]:  axis running: 0
[1970-Jan-01 05:18:58.493005]: Toolhead 0 state error: 0
[1970-Jan-01 05:18:58.540540]:  axis running: 0
[1970-Jan-01 05:18:58.573953]: PRU Event: PRU_SUSPEND_DECEL_EXECUTED(252)
[1970-Jan-01 05:18:58.575647]: PRU Event: PRU_SUSPEND_DECEL_EXECUTED(252)
[1970-Jan-01 05:18:58.577384]: PRU Event: PRU_SUSPEND_DECEL_EXECUTED(252)
[1970-Jan-01 05:18:58.720817]: Last sync period had (0,264,1617) buffer fulls due to suspend moves
[1970-Jan-01 05:18:58.723210]: Libstepper All Axis Abort
[1970-Jan-01 05:18:58.724911]: Clear Toolhead Buffer
[1970-Jan-01 05:18:58.753457]: clear toolhead buffer acknowledged
[1970-Jan-01 05:18:58.803631]: toolhead unpausing
[1970-Jan-01 05:18:58.805308]: quack pause: false
[1970-Jan-01 05:18:58.905979]: Expend Buffer: true
[1970-Jan-01 05:18:58.937543]: Last sync period had (0,264,1632) buffer fulls due to suspend moves
[1970-Jan-01 05:18:58.939741]: Syncing turned false
[1970-Jan-01 05:18:59.059064]: Toolhead 0  ADC Error: 0
[1970-Jan-01 05:18:59.103433]: GAP: Query->Await
[1970-Jan-01 05:18:59.125454]: TH0: Retreived step position 13828367
[1970-Jan-01 05:18:59.159636]: wait for PRU status in get position
[1970-Jan-01 05:18:59.161487]: wait for PRU status in get position
[1970-Jan-01 05:18:59.163236]: GAP: Await->Done(Query)
[1970-Jan-01 05:18:59.265956]: Suspend
[1970-Jan-01 05:18:59.267745]: Suspend index 26 found, A-pos 16.3545
[1970-Jan-01 05:19:01.924762]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 05:19:05.755440]: GAP: Query->Await
[1970-Jan-01 05:19:05.777117]: TH0: Retreived step position 13959439
[1970-Jan-01 05:19:05.814262]: wait for PRU status in get position
[1970-Jan-01 05:19:05.815958]: wait for PRU status in get position
[1970-Jan-01 05:19:05.817608]: GAP: Await->Done(Query)
[1970-Jan-01 05:19:06.566246]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 05:19:06.567998]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 05:19:07.052504]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 05:19:10.645273]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 05:19:11.106333]: Expend Buffer: false
[1970-Jan-01 05:19:11.194290]: Syncing turned true
[1970-Jan-01 05:19:11.222782]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 05:19:11.224495]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 05:19:11.862765]: Toolhead 0  ADC Error: 1
[1970-Jan-01 05:19:12.679992]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 05:19:12.681869]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 05:19:12.683555]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 05:19:12.685383]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 05:19:12.687059]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 05:19:12.688811]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 05:19:12.690720]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 05:19:12.692549]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 05:19:12.694226]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 05:19:12.695904]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 05:19:12.697585]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 05:19:12.780951]: Expected packet id: 0x96, Got packet id: 0x95, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0xb2,0xfa,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x0,0x0,0x0,0x2,0xd4,0xce,0x0,0x95,0x9f,0xea,0x71,0x6c,

[1970-Jan-01 05:19:12.782881]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 05:19:12.846830]: Expected packet id: 0xa6, Got packet id: 0xa5, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0xb2,0xfa,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x0,0x0,0x0,0x2,0xd0,0x44,0x0,0xa5,0xda,0xf3,0x48,0xc1,

[1970-Jan-01 05:19:12.848771]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 05:19:13.145770]: Expected packet id: 0xc8, Got packet id: 0xc7, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0xb2,0xfa,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x0,0x0,0x0,0x2,0xbb,0xf5,0x0,0xc7,0x51,0xf4,0xac,0x90,

[1970-Jan-01 05:19:13.147974]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 05:19:13.189752]: Expected packet id: 0xd0, Got packet id: 0xcf, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0xb2,0xfa,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x0,0x0,0x0,0x2,0xb8,0xde,0x0,0xcf,0x79,0x82,0x22,0x4d,

[1970-Jan-01 05:19:13.191868]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 05:19:13.913230]: Expend Buffer: false
[1970-Jan-01 05:20:18.118729]: Expected packet id: 0x9c, Got packet id: 0x9b, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0xc7,0x97,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x0,0xce,0x0,0x9b,0x32,0x92,0x91,0x23,

[1970-Jan-01 05:20:18.131146]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 05:20:22.098967]: Expected packet id: 0x4, Got packet id: 0x3, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd3,0x0,0xf,0xca,0xb8,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x46,0x1,0x1,0x0,0x0,0x0,0x0,0x6f,0x0,0x3,0x5c,0x99,0x10,0x32,

[1970-Jan-01 05:20:22.101176]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 05:20:30.928728]: toolhead pausing
[1970-Jan-01 05:20:30.933340]: Last sync period had (0,618,5043) buffer fulls due to suspend moves
[1970-Jan-01 05:20:30.935094]: Syncing turned false
[1970-Jan-01 05:20:30.936712]: quack pause: true
[1970-Jan-01 05:20:30.990543]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 05:20:30.992248]: PRU Event: PRU_SUSPEND_DECEL_EXECUTED(4248)
[1970-Jan-01 05:20:30.993962]: PRU Event: PRU_SUSPEND_DECEL_EXECUTED(4248)
[1970-Jan-01 05:20:31.001728]: PRU Event: PRU_SUSPEND_DECEL_EXECUTED(4248)
[1970-Jan-01 05:20:31.286059]: Last sync period had (0,618,5043) buffer fulls due to suspend moves
[1970-Jan-01 05:20:31.288465]: Libstepper All Axis Abort
[1970-Jan-01 05:20:31.297785]: Clear Toolhead Buffer
[1970-Jan-01 05:20:31.380180]: clear toolhead buffer acknowledged
[1970-Jan-01 05:20:31.593459]: toolhead unpausing
[1970-Jan-01 05:20:31.595154]: quack pause: false
[1970-Jan-01 05:20:31.832286]: Expend Buffer: true
[1970-Jan-01 05:20:31.860386]: Last sync period had (0,618,5061) buffer fulls due to suspend moves
[1970-Jan-01 05:20:31.862211]: Syncing turned false
[1970-Jan-01 05:20:31.942844]: Toolhead 0  ADC Error: 0
[1970-Jan-01 05:20:31.974603]: GAP: Query->Await
[1970-Jan-01 05:20:31.986566]: TH0: Retreived step position 13762831
[1970-Jan-01 05:20:32.013384]: wait for PRU status in get position
[1970-Jan-01 05:20:32.015073]: wait for PRU status in get position
[1970-Jan-01 05:20:32.016711]: GAP: Await->Done(Query)
[1970-Jan-01 05:20:32.116324]: Suspend
[1970-Jan-01 05:20:32.121578]: Suspend index 236 found, A-pos 166.93
[1970-Jan-01 05:20:37.593559]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 05:20:37.892208]: GAP: Query->Await
[1970-Jan-01 05:20:37.918437]: TH0: Retreived step position 13828367
[1970-Jan-01 05:20:37.955765]: wait for PRU status in get position
[1970-Jan-01 05:20:37.957553]: wait for PRU status in get position
[1970-Jan-01 05:20:37.959174]: GAP: Await->Done(Query)
[1970-Jan-01 05:20:54.697649]: GetCachedToolUsageStats called
[1970-Jan-01 05:20:56.183831]: toolhead pausing
[1970-Jan-01 05:20:56.193128]: Last sync period had (0,618,5613) buffer fulls due to suspend moves
[1970-Jan-01 05:20:56.195073]: Syncing turned false
[1970-Jan-01 05:20:56.196679]: quack pause: true
[1970-Jan-01 05:20:56.465636]: Last sync period had (0,618,5622) buffer fulls due to suspend moves
[1970-Jan-01 05:20:56.467394]: Libstepper All Axis Abort
[1970-Jan-01 05:20:56.469218]: Clear Toolhead Buffer
[1970-Jan-01 05:20:56.512688]: clear toolhead buffer acknowledged
[1970-Jan-01 05:20:56.605938]: toolhead unpausing
[1970-Jan-01 05:20:56.607590]: quack pause: false
[1970-Jan-01 05:20:56.723638]: Expend Buffer: true
[1970-Jan-01 05:20:56.780333]: Last sync period had (0,618,5637) buffer fulls due to suspend moves
[1970-Jan-01 05:20:56.782538]: Syncing turned false
[1970-Jan-01 05:20:56.921394]: GAP: Query->Await
[1970-Jan-01 05:20:56.952117]: TH0: Retreived step position 14221583
[1970-Jan-01 05:20:56.979421]: wait for PRU status in get position
[1970-Jan-01 05:20:56.981436]: wait for PRU status in get position
[1970-Jan-01 05:20:56.983027]: GAP: Await->Done(Query)
[1970-Jan-01 05:20:57.136523]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 05:20:57.138257]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 05:21:02.810240]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 05:21:03.773345]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 05:21:03.775078]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 05:21:03.853004]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 05:21:04.177128]: GetCachedToolUsageStats called
[1970-Jan-01 05:21:18.868862]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 05:21:23.214091]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 05:21:25.093503]: Last sync period had (0,618,7485) buffer fulls due to suspend moves
[1970-Jan-01 05:21:25.095305]: Syncing turned false
[1970-Jan-01 05:21:25.097476]: TH0: 116 failures in last 4553 packets (2.54777%)
[1970-Jan-01 05:21:25.099391]: Toolhead Abort
[1970-Jan-01 05:21:25.111520]: aborting pru with shutdown=true
[1970-Jan-01 05:21:25.121114]: CLEAR BUFFER FAIL! in libstepper::Abort()
[1970-Jan-01 05:21:25.130838]: Last sync period had (0,618,7485) buffer fulls due to suspend moves
[1970-Jan-01 05:21:25.132924]: Libstepper All Axis Abort
[1970-Jan-01 05:21:25.134541]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 05:21:25.136378]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 05:21:25.255410]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 05:21:25.257604]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 05:21:25.353860]: Commanding stats update: Retract count: 6437127
[1970-Jan-01 05:21:25.355578]: Toolhead 0 marked as possibly blocking!
[1970-Jan-01 05:21:25.963218]: Toolhead 0 done blocking!
[1970-Jan-01 05:21:26.065521]: GetToolUsageStats called in machine  state 0
[1970-Jan-01 05:21:26.067265]: Commanding tool usage stat retrieve
[1970-Jan-01 05:21:26.068972]: GetToolUsageState: Proceeds to 1
[1970-Jan-01 05:21:26.080964]: GetToolUsagState: Error from retrieve: 0x10a
[1970-Jan-01 05:21:26.104707]: Raw usage stats: retract 12874219ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-01 05:21:26.128882]: GetToolUsageStats called in machine  state 1
[1970-Jan-01 05:21:26.130870]: VerifyToolUsageStatsRetrieved: Done
[1970-Jan-01 05:21:26.132493]: GetToolUsageState: Proceeds to 2
[1970-Jan-01 05:21:26.214769]: GetToolUsageStats called in machine  state 2
[1970-Jan-01 05:21:26.217035]: GetToolUsageState: Done, resets
[1970-Jan-01 05:23:12.308806]: Toolhead 0 state error: 80
[1970-Jan-01 05:23:27.171829]: Toolhead 0 state error: 0
[1970-Jan-01 12:27:29.963345]: GetCachedToolUsageStats called
[1970-Jan-01 19:09:25.330198]: GetCachedToolUsageStats called
[1970-Jan-01 19:32:07.488033]: GetCachedToolUsageStats called
[1970-Jan-02 00:29:38.360926]: GetCachedToolUsageStats called
[1970-Jan-02 00:29:39.207451]: Heater manager Set Target Temperature to 180, index 0
[1970-Jan-02 00:29:39.209372]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-02 00:29:40.595108]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false
[1970-Jan-02 00:29:40.597525]: Load Sense Limit Method: 1
[1970-Jan-02 00:29:40.600227]: Last sync period had (0,618,415101) buffer fulls due to suspend moves
[1970-Jan-02 00:29:40.602006]: Libstepper All Axis Abort
[1970-Jan-02 00:29:41.375483]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-02 00:29:41.377305]: Toolhead Abort
[1970-Jan-02 00:29:41.379213]: aborting pru with shutdown=true
[1970-Jan-02 00:29:41.382031]: Last sync period had (0,618,415131) buffer fulls due to suspend moves
[1970-Jan-02 00:29:41.384087]: Libstepper All Axis Abort
[1970-Jan-02 00:29:41.427422]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-02 00:29:43.288267]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false
[1970-Jan-02 00:29:43.290482]: Load Sense Limit Method: 0
[1970-Jan-02 00:29:43.293247]: Last sync period had (0,618,415248) buffer fulls due to suspend moves
[1970-Jan-02 00:29:43.295022]: Libstepper All Axis Abort
[1970-Jan-02 00:29:44.068667]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-02 00:29:44.080880]: Toolhead Abort
[1970-Jan-02 00:29:44.082658]: aborting pru with shutdown=true
[1970-Jan-02 00:29:44.088827]: Last sync period had (0,618,415284) buffer fulls due to suspend moves
[1970-Jan-02 00:29:44.090864]: Libstepper All Axis Abort
[1970-Jan-02 00:29:44.175019]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-02 00:29:44.741728]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-02 00:30:24.958061]: GetCachedToolUsageStats called
[1970-Jan-02 00:30:27.647339]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-02 00:30:27.649112]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-02 00:30:27.751360]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-02 00:32:46.551784]: GetCachedToolUsageStats called
[1970-Jan-02 00:32:53.604371]: Toolhead 0 state error: 80
[1970-Jan-02 00:32:59.049184]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 00:33:03.285827]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 00:33:07.199043]: Last sync period had (0,618,428406) buffer fulls due to suspend moves
[1970-Jan-02 00:33:07.202208]: Syncing turned false
[1970-Jan-02 00:33:07.203943]: Toolhead Abort
[1970-Jan-02 00:33:07.206051]: aborting pru with shutdown=true
[1970-Jan-02 00:33:07.208621]: Last sync period had (0,618,428406) buffer fulls due to suspend moves
[1970-Jan-02 00:33:07.211295]: Libstepper All Axis Abort
[1970-Jan-02 00:33:07.213114]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-02 00:33:07.214795]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-02 00:33:07.446820]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-02 00:33:07.448581]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-02 00:33:07.543761]: Commanding stats update: Retract count: 12874219
[1970-Jan-02 00:33:07.545458]: Toolhead 0 marked as possibly blocking!
[1970-Jan-02 00:33:07.571070]: Toolhead 0 state error: 0
[1970-Jan-02 00:33:08.140293]: Toolhead 0 done blocking!
[1970-Jan-02 00:33:08.226616]: GetToolUsageStats called in machine  state 0
[1970-Jan-02 00:33:08.228334]: Commanding tool usage stat retrieve
[1970-Jan-02 00:33:08.230582]: GetToolUsageState: Proceeds to 1
[1970-Jan-02 00:33:08.232174]: GetToolUsagState: Error from retrieve: 0x10a
[1970-Jan-02 00:33:08.245989]: Raw usage stats: retract 25748438ct, extrusion 1261989 steps, 4365 seconds, refurbed 0 times
[1970-Jan-02 00:33:08.271696]: GetToolUsageStats called in machine  state 1
[1970-Jan-02 00:33:08.273389]: VerifyToolUsageStatsRetrieved: Done
[1970-Jan-02 00:33:08.275091]: GetToolUsageState: Proceeds to 2
[1970-Jan-02 00:33:08.308632]: GetToolUsageStats called in machine  state 2
[1970-Jan-02 00:33:08.310724]: GetToolUsageState: Done, resets
[1970-Jan-02 00:33:27.932990]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-02 00:33:27.940988]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-02 00:33:29.266807]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-02 00:33:54.915923]: GetCachedToolUsageStats called
[1970-Jan-02 00:33:58.296406]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-02 00:34:02.674523]: Toolhead 0 state error: 80
[1970-Jan-02 00:34:02.790378]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-02 00:34:04.881660]: GetCachedToolUsageStats called
[1970-Jan-02 00:34:04.909189]: Toolhead Abort
[1970-Jan-02 00:34:04.911151]: aborting pru with shutdown=true
[1970-Jan-02 00:34:04.913923]: Last sync period had (0,618,431124) buffer fulls due to suspend moves
[1970-Jan-02 00:34:04.915804]: Libstepper All Axis Abort
[1970-Jan-02 00:34:05.378867]: GetCachedToolUsageStats called
[1970-Jan-02 00:34:06.751725]: Toolhead 0 state error: 0
[1970-Jan-02 00:34:08.960749]: Toolhead 0 state error: 80
[1970-Jan-02 00:34:10.965753]: Toolhead 0 state error: 0
[1970-Jan-02 00:34:19.496107]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 00:34:22.607992]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 00:34:23.419344]: Toolhead 0 state error: 80
[1970-Jan-02 00:34:24.635390]: Toolhead 0 state error: 0
[1970-Jan-02 00:34:26.753437]: Toolhead 0 state error: 80
[1970-Jan-02 00:34:27.057832]: Raw HES proceeding
[1970-Jan-02 00:34:27.117503]: HES not updated!
[1970-Jan-02 00:34:27.181009]: HES not updated!
[1970-Jan-02 00:34:27.202897]: Got raw val 24030, saturated: true
[1970-Jan-02 00:34:27.229936]: Returning HES
[1970-Jan-02 00:34:27.242283]: Sending back val 24030, saturated true
[1970-Jan-02 00:34:27.423877]: GetCachedToolUsageStats called
[1970-Jan-02 00:34:27.476788]: Toolhead Abort
[1970-Jan-02 00:34:27.478510]: aborting pru with shutdown=true
[1970-Jan-02 00:34:27.490826]: Last sync period had (0,618,432873) buffer fulls due to suspend moves
[1970-Jan-02 00:34:27.492562]: Libstepper All Axis Abort
[1970-Jan-02 00:34:30.705877]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-02 00:34:30.707651]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-02 00:34:32.068797]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-02 00:34:32.275677]: GetCachedToolUsageStats called
[1970-Jan-02 00:34:33.614483]: Toolhead 0 state error: 0
[1970-Jan-02 00:34:36.199868]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-02 00:34:41.008873]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-02 00:34:45.272976]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-02 00:34:49.882348]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-02 00:34:54.163407]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 00:34:59.596949]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 00:35:03.830545]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 00:35:08.058091]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 00:35:14.323712]: Raw HES proceeding
[1970-Jan-02 00:35:14.368812]: Got raw val 24042, saturated: true
[1970-Jan-02 00:35:14.500873]: Returning HES
[1970-Jan-02 00:35:14.502772]: Sending back val 24042, saturated true
[1970-Jan-02 00:35:14.686996]: GetCachedToolUsageStats called
[1970-Jan-02 00:35:14.744119]: Toolhead Abort
[1970-Jan-02 00:35:14.745870]: aborting pru with shutdown=true
[1970-Jan-02 00:35:14.760858]: Last sync period had (0,618,435633) buffer fulls due to suspend moves
[1970-Jan-02 00:35:14.762761]: Libstepper All Axis Abort
[1970-Jan-02 00:35:18.058477]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-02 00:35:18.070645]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-02 00:35:19.358296]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-02 00:35:19.595123]: GetCachedToolUsageStats called
[1970-Jan-02 00:35:22.547326]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-02 00:35:27.119982]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-02 00:35:29.488510]:  wait for axis 0 full: false offset: 54 l3map offset:    90 status: 1 position 2303 status count 1001
[1970-Jan-02 00:35:32.635442]: Raw HES proceeding
[1970-Jan-02 00:35:32.676172]: Got raw val 24036, saturated: true
[1970-Jan-02 00:35:32.797504]: Returning HES
[1970-Jan-02 00:35:32.799128]: Sending back val 24036, saturated true
[1970-Jan-02 00:35:32.994485]: GetCachedToolUsageStats called
[1970-Jan-02 00:35:33.078721]: Toolhead Abort
[1970-Jan-02 00:35:33.119794]: aborting pru with shutdown=true
[1970-Jan-02 00:35:33.143194]: Last sync period had (0,618,436395) buffer fulls due to suspend moves
[1970-Jan-02 00:35:33.145352]: Libstepper All Axis Abort
[1970-Jan-02 00:35:39.698061]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-02 00:35:39.699800]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-02 00:35:40.969832]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-02 00:35:41.497169]: GetCachedToolUsageStats called
[1970-Jan-02 00:35:44.443410]: Toolhead 0 state error: 80
[1970-Jan-02 00:35:50.509790]: Toolhead 0 state error: 0
[1970-Jan-02 00:35:52.122149]: Toolhead 0 state error: 80
[1970-Jan-02 00:35:53.634583]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-02 00:35:57.842337]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 00:35:59.820915]: Raw HES proceeding
[1970-Jan-02 00:35:59.888092]: HES not updated!
[1970-Jan-02 00:35:59.948619]: HES not updated!
[1970-Jan-02 00:35:59.975694]: HES not updated!
[1970-Jan-02 00:35:59.990899]: Got raw val 24023, saturated: true
[1970-Jan-02 00:36:00.007386]: Returning HES
[1970-Jan-02 00:36:00.010366]: Sending back val 24023, saturated true
[1970-Jan-02 00:36:00.114836]: GetCachedToolUsageStats called
[1970-Jan-02 00:36:00.138985]: Toolhead Abort
[1970-Jan-02 00:36:00.142316]: aborting pru with shutdown=true
[1970-Jan-02 00:36:00.144998]: Last sync period had (0,618,437949) buffer fulls due to suspend moves
[1970-Jan-02 00:36:00.146787]: Libstepper All Axis Abort
[1970-Jan-02 00:36:06.299297]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-02 00:36:06.301410]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-02 00:36:07.640433]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-02 00:36:13.813906]: GetCachedToolUsageStats called
[1970-Jan-02 00:36:16.755002]: Toolhead 0 state error: 0
[1970-Jan-02 00:36:19.517613]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-02 00:36:23.682092]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-02 00:36:29.735545]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-02 00:36:34.238217]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 00:36:38.575779]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 00:36:44.025356]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 00:36:48.008740]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 00:36:52.827691]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 00:36:57.661318]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 00:37:02.065286]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 00:37:02.369996]:  wait for axis 0 full: false offset: 90 l3map offset:    90 status: 1 position 2303 status count 1001
[1970-Jan-02 00:37:06.789086]: Raw HES proceeding
[1970-Jan-02 00:37:06.883044]: Got raw val 24032, saturated: true
[1970-Jan-02 00:37:06.908349]: Returning HES
[1970-Jan-02 00:37:06.920317]: Sending back val 24032, saturated true
[1970-Jan-02 00:37:07.111623]: GetCachedToolUsageStats called
[1970-Jan-02 00:37:07.156087]: Toolhead Abort
[1970-Jan-02 00:37:07.158915]: aborting pru with shutdown=true
[1970-Jan-02 00:37:07.172077]: Last sync period had (0,618,441864) buffer fulls due to suspend moves
[1970-Jan-02 00:37:07.173928]: Libstepper All Axis Abort
[1970-Jan-02 00:37:11.181625]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-02 00:37:11.183413]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-02 00:37:12.400239]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-02 00:37:13.172999]: GetCachedToolUsageStats called
[1970-Jan-02 00:37:16.535964]: Toolhead 0 state error: 80
[1970-Jan-02 00:37:26.656217]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 00:37:31.349456]: Raw HES proceeding
[1970-Jan-02 00:37:31.405738]: HES not updated!
[1970-Jan-02 00:37:31.465682]: HES not updated!
[1970-Jan-02 00:37:31.531029]: HES not updated!
[1970-Jan-02 00:37:31.547634]: Got raw val 24023, saturated: true
[1970-Jan-02 00:37:31.564471]: Returning HES
[1970-Jan-02 00:37:31.566159]: Sending back val 24023, saturated true
[1970-Jan-02 00:37:31.661786]: GetCachedToolUsageStats called
[1970-Jan-02 00:37:31.691681]: Toolhead Abort
[1970-Jan-02 00:37:31.693425]: aborting pru with shutdown=true
[1970-Jan-02 00:37:31.695931]: Last sync period had (0,618,443406) buffer fulls due to suspend moves
[1970-Jan-02 00:37:31.697815]: Libstepper All Axis Abort
[1970-Jan-02 00:37:33.799877]: Toolhead 0 state error: 0
[1970-Jan-02 00:37:34.813240]: Toolhead 0 state error: 80
[1970-Jan-02 00:37:38.356062]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-02 00:37:38.358240]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-02 00:37:39.814884]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-02 00:37:40.015889]: GetCachedToolUsageStats called
[1970-Jan-02 00:37:42.344117]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-02 00:37:45.720655]: Toolhead 0 state error: 0
[1970-Jan-02 00:37:47.168965]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-02 00:37:51.710953]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-02 00:37:56.177241]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-02 00:38:01.580513]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 00:38:05.733432]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 00:38:09.937028]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 00:38:15.436090]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 00:38:19.913448]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 00:38:24.979485]: Raw HES proceeding
[1970-Jan-02 00:38:25.088159]: Got raw val 24022, saturated: true
[1970-Jan-02 00:38:25.234145]: Returning HES
[1970-Jan-02 00:38:25.235786]: Sending back val 24022, saturated true
[1970-Jan-02 00:38:25.419167]: GetCachedToolUsageStats called
[1970-Jan-02 00:38:25.476009]: Toolhead Abort
[1970-Jan-02 00:38:25.477732]: aborting pru with shutdown=true
[1970-Jan-02 00:38:25.490849]: Last sync period had (0,618,446394) buffer fulls due to suspend moves
[1970-Jan-02 00:38:25.492741]: Libstepper All Axis Abort
[1970-Jan-02 00:38:28.877175]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-02 00:38:28.878903]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-02 00:38:30.087777]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-02 00:38:30.362037]: GetCachedToolUsageStats called
[1970-Jan-02 00:38:33.147347]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-02 00:38:36.764812]:  wait for axis 0 full: false offset: 54 l3map offset:    90 status: 1 position 2303 status count 1001
[1970-Jan-02 00:38:38.329894]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-02 00:38:42.534480]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-02 00:38:47.393652]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-02 00:38:52.056602]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 00:38:56.387484]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 00:39:01.843016]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 00:39:07.284877]: Raw HES proceeding
[1970-Jan-02 00:39:07.351846]: Got raw val 24021, saturated: true
[1970-Jan-02 00:39:07.445139]: Returning HES
[1970-Jan-02 00:39:07.446774]: Sending back val 24021, saturated true
[1970-Jan-02 00:39:07.632494]: GetCachedToolUsageStats called
[1970-Jan-02 00:39:07.701846]: Toolhead Abort
[1970-Jan-02 00:39:07.703570]: aborting pru with shutdown=true
[1970-Jan-02 00:39:07.706377]: Last sync period had (0,618,448812) buffer fulls due to suspend moves
[1970-Jan-02 00:39:07.708728]: Libstepper All Axis Abort
[1970-Jan-02 00:39:09.935821]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-02 00:39:09.937732]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-02 00:39:11.256912]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-02 00:39:11.471346]: GetCachedToolUsageStats called
[1970-Jan-02 00:39:14.252134]: Toolhead 0 state error: 80
[1970-Jan-02 00:39:23.912211]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-02 00:39:26.995742]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 00:39:30.645288]: Raw HES proceeding
[1970-Jan-02 00:39:30.701947]: HES not updated!
[1970-Jan-02 00:39:30.923175]: HES not updated!
[1970-Jan-02 00:39:31.742171]: Got raw val 24025, saturated: true
[1970-Jan-02 00:39:31.769317]: Returning HES
[1970-Jan-02 00:39:31.782786]: Sending back val 24025, saturated true
[1970-Jan-02 00:39:32.015537]: GetCachedToolUsageStats called
[1970-Jan-02 00:39:32.055954]: Toolhead Abort
[1970-Jan-02 00:39:32.057724]: aborting pru with shutdown=true
[1970-Jan-02 00:39:32.060357]: Last sync period had (0,618,450345) buffer fulls due to suspend moves
[1970-Jan-02 00:39:32.062219]: Libstepper All Axis Abort
[1970-Jan-02 00:39:37.116423]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-02 00:39:37.118322]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-02 00:39:52.431692]: GetCachedToolUsageStats called