[1970-Jan-01 00:01:31.181289]: Loading settings from string...
[1970-Jan-01 00:01:31.465301]: Parsing toolhead settings for bronx...
[1970-Jan-01 00:01:31.504633]: Rebuilding toolhead structure
[1970-Jan-01 00:01:31.543254]: Building bronx location 0...
[1970-Jan-01 00:01:31.711300]: Initialization: heater settings
[1970-Jan-01 00:01:31.713213]: storing heater 0 to time out after 3 minutes at temp, 1 minutes with no rise of 10C, fan feedforward amount 15C
[1970-Jan-01 00:01:31.730827]: Settings: Parsing home subtree...
[1970-Jan-01 00:01:31.757379]: Init endstop for axis: 0, type: load_sense, polarity: false
[1970-Jan-01 00:01:31.771364]: Init endstop for axis: 1, type: load_sense, polarity: false
[1970-Jan-01 00:01:31.773198]: Init endstop for axis: 2, type: toolhead, polarity: false
[1970-Jan-01 00:01:31.798508]: Parsing root settings...
[1970-Jan-01 00:01:31.851066]: STEPPER CONVERSIONS: Axis 0 steps per mm: 88.5732
[1970-Jan-01 00:01:31.882158]: STEPPER CONVERSIONS: Axis 1 steps per mm: 88.5732
[1970-Jan-01 00:01:31.884086]: STEPPER CONVERSIONS: Axis 2 steps per mm: 400
[1970-Jan-01 00:01:31.885906]: STEPPER CONVERSIONS: Axis 3 steps per mm: 108.55
[1970-Jan-01 00:01:31.887868]: STEPPER CONVERSIONS: Axis 0 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 242 29 0
[1970-Jan-01 00:01:31.900406]: STEPPER CONVERSIONS: Axis 1 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 32 29 0
[1970-Jan-01 00:01:31.902725]: STEPPER CONVERSIONS: Axis 2 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 32 32 0
[1970-Jan-01 00:01:31.904921]: STEPPER CONVERSIONS: Axis 3 periods per second 17847.6 seconds per period 5.603e-05 slowest tickrate axis 3 tickrate 5.603e-05 radices 32 32 32 31
[1970-Jan-01 00:01:31.907378]: syncing set to true
[1970-Jan-01 00:01:31.940906]: Axis count unspecified, defaulting to 4
[1970-Jan-01 00:01:31.977404]: Loading capacitor model settings for extruder 0
[1970-Jan-01 00:01:31.991230]: Have 1 valid ToolheadManager pointers, 0 is 0x1de650
[1970-Jan-01 00:01:32.109067]: setting driver address to 22
[1970-Jan-01 00:01:35.370814]: Init step: 0
[1970-Jan-01 00:01:35.420839]: Reset Toolhead Program State
[1970-Jan-01 00:01:35.422524]: Toolhead programmer: Resetting
[1970-Jan-01 00:01:35.424336]: done
[1970-Jan-01 00:01:36.431757]: Init step: 1
[1970-Jan-01 00:01:36.438897]: done
[1970-Jan-01 00:01:36.934033]: Init step: 2
[1970-Jan-01 00:01:36.935931]: done
[1970-Jan-01 00:01:37.452421]: Init step: 3
[1970-Jan-01 00:01:37.618442]: done
[1970-Jan-01 00:01:37.943993]: Init step: 4
[1970-Jan-01 00:01:37.971279]: done
[1970-Jan-01 00:01:38.445746]: Init step: 5
[1970-Jan-01 00:01:38.462556]: done
[1970-Jan-01 00:01:38.958445]: Init step: 5
[1970-Jan-01 00:01:39.070736]: done
[1970-Jan-01 00:01:39.470806]: Init step: 5
[1970-Jan-01 00:01:39.529421]: done
[1970-Jan-01 00:01:39.964177]: Init step: 5
[1970-Jan-01 00:01:39.966034]: done
[1970-Jan-01 00:01:40.465372]: Init step: 5
[1970-Jan-01 00:01:40.480456]: done
[1970-Jan-01 00:01:40.974281]: Init step: 5
[1970-Jan-01 00:01:41.076366]: done
[1970-Jan-01 00:01:41.476402]: Init step: 5
[1970-Jan-01 00:01:41.490977]: Toolhead 0: Packet 0x0: Calculated CRC: 0x62f5481b  Packet CRC: 0x0
[1970-Jan-01 00:01:41.493029]: Toolhead 0 : Toolhead Response Fail with comm_error: 1  Retry # : 1
[1970-Jan-01 00:01:41.494743]: done
[1970-Jan-01 00:01:41.978946]: Init step: 5
[1970-Jan-01 00:01:41.991173]: done
[1970-Jan-01 00:01:42.479972]: Init step: 5
[1970-Jan-01 00:01:42.492323]: done
[1970-Jan-01 00:01:42.982405]: Init step: 5
[1970-Jan-01 00:01:43.084590]: done
[1970-Jan-01 00:01:43.494575]: Init step: 5
[1970-Jan-01 00:01:43.500926]: Got valid API version 6 for Toolhead 0
[1970-Jan-01 00:01:43.507105]: done
[1970-Jan-01 00:01:43.997417]: Init step: 5
[1970-Jan-01 00:01:44.010470]: done
[1970-Jan-01 00:01:44.499289]: Init step: 5
[1970-Jan-01 00:01:44.611678]: done
[1970-Jan-01 00:01:45.001504]: Init step: 5
[1970-Jan-01 00:01:45.010927]: Toolhead 0 state error: 80
[1970-Jan-01 00:01:45.012652]: Toolhead 0: Toolhead has Firmware version 1.7,734
[1970-Jan-01 00:01:45.014741]:  Toolhead 0 initialized
[1970-Jan-01 00:01:45.016557]: done
[1970-Jan-01 00:01:45.503445]: Init step: 6
[1970-Jan-01 00:01:45.505319]: done
[1970-Jan-01 00:01:46.016412]: Init step: 7
[1970-Jan-01 00:01:46.018822]: done
[1970-Jan-01 00:01:46.533367]: PRU Event: PRU_INIT
[1970-Jan-01 00:01:47.531013]: bronx lowest mem space: 0x376 bytes
[1970-Jan-01 00:01:47.532768]: Checking tool eeprom version
[1970-Jan-01 00:01:47.534559]: Commanding tool usage stat retrieve
[1970-Jan-01 00:01:47.536241]: New tool uid 0xac97 attached, updating info cache
[1970-Jan-01 00:01:49.011099]: Loading settings from string...
[1970-Jan-01 00:01:49.136561]: Parsing toolhead settings for bronx...
[1970-Jan-01 00:01:49.139051]: Initialization: heater settings
[1970-Jan-01 00:01:49.151307]: storing heater 0 to time out after 3 minutes at temp, 1 minutes with no rise of 10C, fan feedforward amount 15C
[1970-Jan-01 00:01:49.153797]: Settings: Parsing home subtree...
[1970-Jan-01 00:01:49.156626]: Init endstop for axis: 0, type: load_sense, polarity: false
[1970-Jan-01 00:01:49.158474]: Init endstop for axis: 1, type: load_sense, polarity: false
[1970-Jan-01 00:01:49.170779]: Init endstop for axis: 2, type: toolhead, polarity: false
[1970-Jan-01 00:01:49.172586]: Parsing root settings...
[1970-Jan-01 00:01:49.174654]: STEPPER CONVERSIONS: Axis 0 steps per mm: 88.5732
[1970-Jan-01 00:01:49.176521]: STEPPER CONVERSIONS: Axis 1 steps per mm: 88.5732
[1970-Jan-01 00:01:49.179009]: STEPPER CONVERSIONS: Axis 2 steps per mm: 400
[1970-Jan-01 00:01:49.191336]: STEPPER CONVERSIONS: Axis 3 steps per mm: 108.55
[1970-Jan-01 00:01:49.193232]: STEPPER CONVERSIONS: Axis 0 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 3 tickrate 5.603e-05 radices 32 32 32 31
[1970-Jan-01 00:01:49.195459]: STEPPER CONVERSIONS: Axis 1 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 3 tickrate 5.603e-05 radices 32 32 32 31
[1970-Jan-01 00:01:49.197674]: STEPPER CONVERSIONS: Axis 2 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 3 tickrate 5.603e-05 radices 32 32 32 31
[1970-Jan-01 00:01:49.210269]: STEPPER CONVERSIONS: Axis 3 periods per second 17847.6 seconds per period 5.603e-05 slowest tickrate axis 3 tickrate 5.603e-05 radices 32 32 32 31
[1970-Jan-01 00:01:49.212858]: syncing set to true
[1970-Jan-01 00:01:49.233379]: Axis count unspecified, defaulting to 4
[1970-Jan-01 00:01:49.239404]: Loading capacitor model settings for extruder 0
[1970-Jan-01 00:01:49.253492]: Have 1 valid ToolheadManager pointers, 0 is 0x1de650
[1970-Jan-01 00:01:50.490914]: Connected tool has eepromv4
[1970-Jan-01 00:01:52.000935]: Raw usage stats: retract 50287ct, extrusion 864756 steps, 3530 seconds, refurbed 0 times
[1970-Jan-01 00:02:08.944767]: GetCachedToolUsageStats called
[1970-Jan-01 00:02:09.255636]: bronx lowest mem space: 0x372 bytes
[1970-Jan-01 00:03:19.967053]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 00:03:19.968957]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 04:42:27.074298]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 04:42:27.076108]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 06:08:49.573443]: Last sync period had (0,0,131238) buffer fulls due to suspend moves
[1970-Jan-01 06:08:49.576357]: Syncing turned false
[1970-Jan-01 06:08:49.578160]: TH0: 2 failures in last 10841 packets (0.0184485%)
[1970-Jan-01 06:08:49.590449]: Toolhead Abort
[1970-Jan-01 06:08:49.592310]: aborting pru with shutdown=true
[1970-Jan-01 06:08:49.595052]: Last sync period had (0,0,131238) buffer fulls due to suspend moves
[1970-Jan-01 06:08:49.596980]: Libstepper All Axis Abort
[1970-Jan-01 06:08:49.598631]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 06:08:49.610649]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 06:08:49.957560]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 06:08:49.970472]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 06:08:50.148180]: Commanding stats update: Retract count: 50287
[1970-Jan-01 06:08:50.200283]: Toolhead 0 marked as possibly blocking!
[1970-Jan-01 06:08:51.820790]: Toolhead 0 done blocking!
[1970-Jan-01 06:08:51.962036]: GetToolUsageStats called in machine  state 0
[1970-Jan-01 06:08:51.964081]: Commanding tool usage stat retrieve
[1970-Jan-01 06:08:51.965905]: GetToolUsageState: Proceeds to 1
[1970-Jan-01 06:08:51.967554]: GetToolUsagState: Error from retrieve: 0x10a
[1970-Jan-01 06:08:52.024638]: GetToolUsageStats called in machine  state 1
[1970-Jan-01 06:08:52.094719]: GetToolUsageStats called in machine  state 1
[1970-Jan-01 06:08:52.146510]: GetToolUsageStats called in machine  state 1
[1970-Jan-01 06:08:52.221002]: Raw usage stats: retract 100574ct, extrusion 864756 steps, 3530 seconds, refurbed 0 times
[1970-Jan-01 06:08:52.249514]: GetToolUsageStats called in machine  state 1
[1970-Jan-01 06:08:52.261658]: VerifyToolUsageStatsRetrieved: Done
[1970-Jan-01 06:08:52.263948]: GetToolUsageState: Proceeds to 2
[1970-Jan-01 06:08:52.309024]: GetToolUsageStats called in machine  state 2
[1970-Jan-01 06:08:52.321287]: GetToolUsageState: Done, resets
[1970-Jan-02 06:27:10.447102]: bronx lowest mem space: 0x362 bytes