[1970-Jan-01 00:01:30.209547]: Loading settings from string...
[1970-Jan-01 00:01:30.478664]: Parsing toolhead settings for bronx...
[1970-Jan-01 00:01:30.530880]: Rebuilding toolhead structure
[1970-Jan-01 00:01:30.570875]: Building bronx location 0...
[1970-Jan-01 00:01:30.750800]: Initialization: heater settings
[1970-Jan-01 00:01:30.752687]: storing heater 0 to time out after 3 minutes at temp, 1 minutes with no rise of 10C, fan feedforward amount 15C
[1970-Jan-01 00:01:30.770820]: Settings: Parsing home subtree...
[1970-Jan-01 00:01:30.801929]: Init endstop for axis: 0, type: load_sense, polarity: false
[1970-Jan-01 00:01:30.821762]: Init endstop for axis: 1, type: load_sense, polarity: false
[1970-Jan-01 00:01:30.823559]: Init endstop for axis: 2, type: toolhead, polarity: false
[1970-Jan-01 00:01:30.862109]: Parsing root settings...
[1970-Jan-01 00:01:30.914831]: STEPPER CONVERSIONS: Axis 0 steps per mm: 88.5732
[1970-Jan-01 00:01:30.953717]: STEPPER CONVERSIONS: Axis 1 steps per mm: 88.5732
[1970-Jan-01 00:01:30.955601]: STEPPER CONVERSIONS: Axis 2 steps per mm: 400
[1970-Jan-01 00:01:30.957389]: STEPPER CONVERSIONS: Axis 3 steps per mm: 108.55
[1970-Jan-01 00:01:30.959323]: STEPPER CONVERSIONS: Axis 0 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 240 29 0
[1970-Jan-01 00:01:30.971934]: STEPPER CONVERSIONS: Axis 1 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 32 29 0
[1970-Jan-01 00:01:30.974124]: STEPPER CONVERSIONS: Axis 2 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 32 32 0
[1970-Jan-01 00:01:30.976350]: STEPPER CONVERSIONS: Axis 3 periods per second 17847.6 seconds per period 5.603e-05 slowest tickrate axis 3 tickrate 5.603e-05 radices 32 32 32 31
[1970-Jan-01 00:01:30.978769]: syncing set to true
[1970-Jan-01 00:01:31.017244]: Axis count unspecified, defaulting to 4
[1970-Jan-01 00:01:31.056230]: Loading capacitor model settings for extruder 0
[1970-Jan-01 00:01:31.059682]: Have 1 valid ToolheadManager pointers, 0 is 0x1de4c8
[1970-Jan-01 00:01:31.176069]: setting driver address to 22
[1970-Jan-01 00:01:34.550926]: Init step: 0
[1970-Jan-01 00:01:34.599271]: Reset Toolhead Program State
[1970-Jan-01 00:01:34.611315]: Toolhead programmer: Resetting
[1970-Jan-01 00:01:34.613091]: done
[1970-Jan-01 00:01:35.888066]: Init step: 1
[1970-Jan-01 00:01:35.906385]: done
[1970-Jan-01 00:01:36.389734]: Init step: 2
[1970-Jan-01 00:01:36.401713]: done
[1970-Jan-01 00:01:36.894254]: Init step: 3
[1970-Jan-01 00:01:37.037336]: done
[1970-Jan-01 00:01:37.396430]: Init step: 4
[1970-Jan-01 00:01:37.417451]: done
[1970-Jan-01 00:01:37.899278]: Init step: 5
[1970-Jan-01 00:01:37.921950]: done
[1970-Jan-01 00:01:38.409929]: Init step: 5
[1970-Jan-01 00:01:38.512133]: done
[1970-Jan-01 00:01:38.914673]: Init step: 5
[1970-Jan-01 00:01:38.997411]: done
[1970-Jan-01 00:01:39.420224]: Init step: 5
[1970-Jan-01 00:01:39.422018]: done
[1970-Jan-01 00:01:39.918456]: Init step: 5
[1970-Jan-01 00:01:39.932028]: done
[1970-Jan-01 00:01:40.423380]: Init step: 5
[1970-Jan-01 00:01:40.525404]: done
[1970-Jan-01 00:01:40.922881]: Init step: 5
[1970-Jan-01 00:01:40.930956]: Toolhead 0: Packet 0x0: Calculated CRC: 0x62f5481b  Packet CRC: 0x0
[1970-Jan-01 00:01:40.932842]: Toolhead 0 : Toolhead Response Fail with comm_error: 1  Retry # : 1
[1970-Jan-01 00:01:40.934470]: done
[1970-Jan-01 00:01:41.425513]: Init step: 5
[1970-Jan-01 00:01:41.427268]: done
[1970-Jan-01 00:01:41.942736]: Init step: 5
[1970-Jan-01 00:01:41.944803]: done
[1970-Jan-01 00:01:42.441794]: Init step: 5
[1970-Jan-01 00:01:42.543828]: done
[1970-Jan-01 00:01:42.938393]: Init step: 5
[1970-Jan-01 00:01:42.951909]: Got valid API version 6 for Toolhead 0
[1970-Jan-01 00:01:42.958063]: done
[1970-Jan-01 00:01:43.440786]: Init step: 5
[1970-Jan-01 00:01:43.450474]: done
[1970-Jan-01 00:01:43.960758]: Init step: 5
[1970-Jan-01 00:01:44.062781]: done
[1970-Jan-01 00:01:44.453008]: Init step: 5
[1970-Jan-01 00:01:44.460918]: Toolhead 0: Toolhead has Firmware version 1.7,724
[1970-Jan-01 00:01:44.462968]:  Toolhead 0 initialized
[1970-Jan-01 00:01:44.464653]: done
[1970-Jan-01 00:01:44.954954]: Init step: 6
[1970-Jan-01 00:01:44.956815]: done
[1970-Jan-01 00:01:45.456681]: Init step: 7
[1970-Jan-01 00:01:45.459050]: done
[1970-Jan-01 00:01:45.991853]: bronx lowest mem space: 0x376 bytes
[1970-Jan-01 00:01:45.993518]: Checking tool eeprom version
[1970-Jan-01 00:01:45.995115]: Commanding tool usage stat retrieve
[1970-Jan-01 00:01:45.996722]: New tool uid 0xac97 attached, updating info cache
[1970-Jan-01 00:01:46.001331]: Connected tool has eepromv4
[1970-Jan-01 00:01:46.012768]: Raw usage stats: retract 3139ct, extrusion 591199 steps, 3019 seconds, refurbed 0 times
[1970-Jan-01 00:01:46.014533]: Steps/mm not configured, tool usage logging will be wrong!
[1970-Jan-01 00:01:46.037475]: PRU Event: PRU_INIT
[1970-Jan-01 00:01:47.725952]: Loading settings from string...
[1970-Jan-01 00:01:47.849157]: Parsing toolhead settings for bronx...
[1970-Jan-01 00:01:47.861998]: Initialization: heater settings
[1970-Jan-01 00:01:47.864247]: storing heater 0 to time out after 3 minutes at temp, 1 minutes with no rise of 10C, fan feedforward amount 15C
[1970-Jan-01 00:01:47.866220]: Settings: Parsing home subtree...
[1970-Jan-01 00:01:47.869078]: Init endstop for axis: 0, type: load_sense, polarity: false
[1970-Jan-01 00:01:47.881267]: Init endstop for axis: 1, type: load_sense, polarity: false
[1970-Jan-01 00:01:47.883098]: Init endstop for axis: 2, type: toolhead, polarity: false
[1970-Jan-01 00:01:47.884819]: Parsing root settings...
[1970-Jan-01 00:01:47.886819]: STEPPER CONVERSIONS: Axis 0 steps per mm: 88.5732
[1970-Jan-01 00:01:47.888649]: STEPPER CONVERSIONS: Axis 1 steps per mm: 88.5732
[1970-Jan-01 00:01:47.900848]: STEPPER CONVERSIONS: Axis 2 steps per mm: 400
[1970-Jan-01 00:01:47.902685]: STEPPER CONVERSIONS: Axis 3 steps per mm: 108.55
[1970-Jan-01 00:01:47.905153]: STEPPER CONVERSIONS: Axis 0 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 3 tickrate 5.603e-05 radices 32 32 32 31
[1970-Jan-01 00:01:47.907359]: STEPPER CONVERSIONS: Axis 1 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 3 tickrate 5.603e-05 radices 32 32 32 31
[1970-Jan-01 00:01:47.909640]: STEPPER CONVERSIONS: Axis 2 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 3 tickrate 5.603e-05 radices 32 32 32 31
[1970-Jan-01 00:01:47.915718]: STEPPER CONVERSIONS: Axis 3 periods per second 17847.6 seconds per period 5.603e-05 slowest tickrate axis 3 tickrate 5.603e-05 radices 32 32 32 31
[1970-Jan-01 00:01:47.918316]: syncing set to true
[1970-Jan-01 00:01:47.937898]: Axis count unspecified, defaulting to 4
[1970-Jan-01 00:01:47.954130]: Loading capacitor model settings for extruder 0
[1970-Jan-01 00:01:47.957718]: Have 1 valid ToolheadManager pointers, 0 is 0x1de4c8
[1970-Jan-01 00:01:48.211052]: GetCachedToolUsageStats called
[1970-Jan-01 00:02:05.147952]: bronx lowest mem space: 0x372 bytes
[1970-Jan-01 00:02:09.802628]: GetCachedToolUsageStats called
[1970-Jan-01 01:18:10.531779]: GetCachedToolUsageStats called
[1970-Jan-01 01:24:27.654545]: GetCachedToolUsageStats called
[1970-Jan-01 01:24:28.363915]: Heater manager Set Target Temperature to 180, index 0
[1970-Jan-01 01:24:28.365689]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:24:29.122122]: bronx lowest mem space: 0x352 bytes
[1970-Jan-01 01:24:29.821670]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false
[1970-Jan-01 01:24:29.823789]: Load Sense Limit Method: 1
[1970-Jan-01 01:24:29.827585]: Last sync period had (0,0,29517) buffer fulls due to suspend moves
[1970-Jan-01 01:24:29.829342]: Libstepper All Axis Abort
[1970-Jan-01 01:24:30.588744]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 01:24:30.590900]: TH0: 2 failures in last 4678 packets (0.0427533%)
[1970-Jan-01 01:24:30.592888]: Toolhead Abort
[1970-Jan-01 01:24:30.595201]: aborting pru with shutdown=true
[1970-Jan-01 01:24:30.597798]: Last sync period had (0,0,29538) buffer fulls due to suspend moves
[1970-Jan-01 01:24:30.599639]: Libstepper All Axis Abort
[1970-Jan-01 01:24:30.663964]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 01:24:33.264524]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false
[1970-Jan-01 01:24:33.266510]: Load Sense Limit Method: 0
[1970-Jan-01 01:24:33.294169]: CLEAR BUFFER FAIL! in libstepper::Abort()
[1970-Jan-01 01:24:33.298139]: Last sync period had (0,0,29607) buffer fulls due to suspend moves
[1970-Jan-01 01:24:33.299933]: Libstepper All Axis Abort
[1970-Jan-01 01:24:34.446643]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 01:24:34.448571]: Toolhead Abort
[1970-Jan-01 01:24:34.453640]: aborting pru with shutdown=true
[1970-Jan-01 01:24:34.456718]: Last sync period had (0,0,29637) buffer fulls due to suspend moves
[1970-Jan-01 01:24:34.458553]: Libstepper All Axis Abort
[1970-Jan-01 01:24:34.542800]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 01:24:35.139710]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:26:55.365622]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:27:05.522641]: Toolhead 0 state error: 80
[1970-Jan-01 01:27:05.701319]: Last sync period had (0,0,36987) buffer fulls due to suspend moves
[1970-Jan-01 01:27:05.703185]: Syncing turned false
[1970-Jan-01 01:27:05.705334]: Toolhead Abort
[1970-Jan-01 01:27:05.707089]: aborting pru with shutdown=true
[1970-Jan-01 01:27:05.709621]: Last sync period had (0,0,36987) buffer fulls due to suspend moves
[1970-Jan-01 01:27:05.711741]: Libstepper All Axis Abort
[1970-Jan-01 01:27:05.713402]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 01:27:05.715184]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:27:06.184566]: GetCachedToolUsageStats called
[1970-Jan-01 01:27:08.594975]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:27:16.755856]: Changing HES sample rate. Commanded: 215Hz; clamped to 215Hz (215/1)
[1970-Jan-01 01:27:16.928778]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:27:19.316624]: Last sync period had (0,0,37503) buffer fulls due to suspend moves
[1970-Jan-01 01:27:19.318464]: Syncing turned false
[1970-Jan-01 01:27:19.320440]: Toolhead Abort
[1970-Jan-01 01:27:19.322322]: aborting pru with shutdown=true
[1970-Jan-01 01:27:19.324906]: Last sync period had (0,0,37503) buffer fulls due to suspend moves
[1970-Jan-01 01:27:19.326691]: Libstepper All Axis Abort
[1970-Jan-01 01:27:19.328501]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 01:27:19.330432]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:27:19.898097]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 01:27:19.899864]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:27:19.971295]: Commanding stats update: Retract count: 3139
[1970-Jan-01 01:27:19.973059]: Toolhead 0 marked as possibly blocking!
[1970-Jan-01 01:27:21.445031]: Toolhead 0 done blocking!
[1970-Jan-01 01:27:21.573131]: GetToolUsageStats called in machine  state 0
[1970-Jan-01 01:27:21.574947]: Commanding tool usage stat retrieve
[1970-Jan-01 01:27:21.576746]: GetToolUsageState: Proceeds to 1
[1970-Jan-01 01:27:21.578360]: GetToolUsagState: Error from retrieve: 0x10a
[1970-Jan-01 01:27:21.623223]: GetToolUsageStats called in machine  state 1
[1970-Jan-01 01:27:21.675600]: GetToolUsageStats called in machine  state 1
[1970-Jan-01 01:27:21.711461]: GetToolUsageStats called in machine  state 1
[1970-Jan-01 01:27:21.752391]: Raw usage stats: retract 6278ct, extrusion 596301 steps, 3027 seconds, refurbed 0 times
[1970-Jan-01 01:27:21.788793]: GetToolUsageStats called in machine  state 1
[1970-Jan-01 01:27:21.790790]: VerifyToolUsageStatsRetrieved: Done
[1970-Jan-01 01:27:21.792547]: GetToolUsageState: Proceeds to 2
[1970-Jan-01 01:27:21.825200]: GetToolUsageStats called in machine  state 2
[1970-Jan-01 01:27:21.826966]: GetToolUsageState: Done, resets
[1970-Jan-01 01:27:49.716442]: Toolhead 0 state error: 0
[1970-Jan-01 01:27:55.738376]: GetCachedToolUsageStats called
[1970-Jan-01 01:27:56.257264]: Heater manager Set Target Temperature to 180, index 0
[1970-Jan-01 01:27:56.259027]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:27:58.310812]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false
[1970-Jan-01 01:27:58.312924]: Load Sense Limit Method: 1
[1970-Jan-01 01:27:58.320843]: Last sync period had (0,0,39663) buffer fulls due to suspend moves
[1970-Jan-01 01:27:58.323697]: Libstepper All Axis Abort
[1970-Jan-01 01:27:59.589453]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 01:27:59.591918]: Toolhead Abort
[1970-Jan-01 01:27:59.601933]: aborting pru with shutdown=true
[1970-Jan-01 01:27:59.610815]: Last sync period had (0,0,39693) buffer fulls due to suspend moves
[1970-Jan-01 01:27:59.612561]: Libstepper All Axis Abort
[1970-Jan-01 01:27:59.658886]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 01:28:02.235261]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false
[1970-Jan-01 01:28:02.237240]: Load Sense Limit Method: 0
[1970-Jan-01 01:28:02.250821]: Last sync period had (0,0,39753) buffer fulls due to suspend moves
[1970-Jan-01 01:28:02.252629]: Libstepper All Axis Abort
[1970-Jan-01 01:28:03.305471]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 01:28:03.307277]: Toolhead Abort
[1970-Jan-01 01:28:03.308967]: aborting pru with shutdown=true
[1970-Jan-01 01:28:03.322138]: Last sync period had (0,0,39774) buffer fulls due to suspend moves
[1970-Jan-01 01:28:03.323922]: Libstepper All Axis Abort
[1970-Jan-01 01:28:03.485797]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 01:28:04.063734]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:28:38.572848]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:28:50.729244]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:28:55.404326]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false
[1970-Jan-01 01:29:03.503719]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:29:12.448648]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:29:14.080326]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-01 01:29:14.082125]: Toolhead Abort
[1970-Jan-01 01:29:14.083815]: aborting pru with shutdown=false
[1970-Jan-01 01:29:14.086388]: Last sync period had (0,0,42546) buffer fulls due to suspend moves
[1970-Jan-01 01:29:14.088257]: Libstepper All Axis Abort
[1970-Jan-01 01:29:14.173655]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-01 01:29:14.343467]: HES logged: true
[1970-Jan-01 01:29:24.035575]: GAP: Query->Await
[1970-Jan-01 01:29:24.081134]: TH0: Retreived step position 11862287
[1970-Jan-01 01:29:24.136777]: wait for PRU status in get position
[1970-Jan-01 01:29:24.138424]: wait for PRU status in get position
[1970-Jan-01 01:29:24.150247]: GAP: Await->Done(Query)
[1970-Jan-01 01:29:24.606020]: Changing HES sample rate. Commanded: 30Hz; clamped to 30.7143Hz (215/7)
[1970-Jan-01 01:29:24.758816]: Syncing turned true
[1970-Jan-01 01:29:24.806625]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 01:29:24.808321]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 01:29:25.052669]: Toolhead 0  ADC Error: 1
[1970-Jan-01 01:29:25.122755]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 01:29:25.124465]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 01:29:25.126203]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 01:29:25.147119]: Toolhead 0 commands idle
[1970-Jan-01 01:29:25.185552]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 01:29:25.187221]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 01:29:25.188886]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 01:29:25.200877]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 01:29:25.203690]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 01:29:25.205353]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 01:29:25.207010]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 01:29:25.212609]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 01:29:29.733691]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:29:32.479368]: Buffer stall ongoing: 47085
[1970-Jan-01 01:29:32.677192]: Buffer stall ongoing: 88881
[1970-Jan-01 01:29:32.728181]: Buffer stall ongoing: 99717
[1970-Jan-01 01:29:32.756851]: Last sync period had (0,0,321) buffer fulls due to suspend moves
[1970-Jan-01 01:29:32.758628]: Syncing turned false
[1970-Jan-01 01:29:32.821622]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 01:29:32.823609]: Buffer stall ongoing: 106038
[1970-Jan-01 01:29:32.863332]: Toolhead 0  ADC Error: 0
[1970-Jan-01 01:29:34.334453]: HES logged: true
[1970-Jan-01 01:29:34.716940]: GetCachedToolUsageStats called
[1970-Jan-01 01:29:37.875089]: GAP: Query->Await
[1970-Jan-01 01:29:37.923307]: TH0: Retreived step position 11534607
[1970-Jan-01 01:29:37.981964]: wait for PRU status in get position
[1970-Jan-01 01:29:37.983724]: wait for PRU status in get position
[1970-Jan-01 01:29:37.985332]: GAP: Await->Done(Query)
[1970-Jan-01 01:29:39.350741]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:29:45.982710]: Changing HES sample rate. Commanded: 215Hz; clamped to 215Hz (215/1)
[1970-Jan-01 01:29:46.891445]: GetCachedToolUsageStats called
[1970-Jan-01 01:29:47.115116]: Expecting 504055 steps extruded this print from 4643.52 mm of plastic
[1970-Jan-01 01:29:47.811762]: Heater manager Set Target Temperature to 195, index 0
[1970-Jan-01 01:29:47.813520]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:29:48.217939]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:30:34.478941]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:30:35.946828]: Expend Buffer: false
[1970-Jan-01 01:30:36.051431]: Syncing turned true
[1970-Jan-01 01:30:36.135072]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 01:30:36.136778]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 01:30:36.604947]: Toolhead 0  ADC Error: 1
[1970-Jan-01 01:30:36.808297]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 01:30:36.810182]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 01:30:36.812054]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 01:30:36.813748]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 01:30:36.815414]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 01:30:36.817080]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 01:30:36.818956]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 01:30:36.821204]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 01:30:36.822892]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 01:30:36.824566]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 01:30:36.830959]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 01:30:37.075574]: Expected packet id: 0xfa, Got packet id: 0xf9, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc3,0x0,0xf,0xd,0x92,0x1,0x0,0xc3,0x0,0x0,0xac,0x97,0x3,0x52,0x1,0x0,0x0,0x0,0x0,0x0,0x20,0x0,0xf9,0x4f,0x60,0x3f,0x5d,

[1970-Jan-01 01:30:37.077465]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 01:30:38.184191]: Expected packet id: 0xa1, Got packet id: 0xa0, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc4,0x0,0xf,0xe,0x4,0x1,0x0,0xc3,0x0,0x0,0xac,0x97,0x3,0x52,0x1,0x0,0x0,0x0,0x0,0xa,0x7e,0x0,0xa0,0x99,0xd7,0x8,0xfe,

[1970-Jan-01 01:30:38.186085]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 01:30:38.191289]: Expected packet id: 0xa1, Got packet id: 0xa0, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc4,0x0,0xf,0xe,0x4,0x1,0x0,0xc3,0x0,0x0,0xac,0x97,0x3,0x52,0x1,0x0,0x0,0x0,0x0,0xa,0x7e,0x0,0xa0,0x99,0xd7,0x8,0xfe,

[1970-Jan-01 01:30:38.193193]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 2
[1970-Jan-01 01:30:38.267698]: Expected packet id: 0xb3, Got packet id: 0xb2, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc4,0x0,0xf,0xe,0x4,0x1,0x0,0xc3,0x0,0x0,0xac,0x97,0x3,0x52,0x1,0x0,0x0,0x0,0x0,0x4,0xbd,0x0,0xb2,0x19,0x58,0x26,0x9c,

[1970-Jan-01 01:30:38.274318]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 01:30:40.991627]: Toolhead 0 state error: 81
[1970-Jan-01 01:30:42.640939]: GetCachedToolUsageStats called
[1970-Jan-01 01:30:42.690323]: toolhead pausing
[1970-Jan-01 01:30:42.692031]: Toolhead 0 : Retry: Waited 1.69831s from state change
[1970-Jan-01 01:30:42.696651]: Last sync period had (0,309,2505) buffer fulls due to suspend moves
[1970-Jan-01 01:30:42.698395]: Syncing turned false
[1970-Jan-01 01:30:42.699997]: quack pause: true
[1970-Jan-01 01:30:42.782992]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 01:30:42.825482]:  axis running: 0
[1970-Jan-01 01:30:43.297925]: Last sync period had (0,309,2505) buffer fulls due to suspend moves
[1970-Jan-01 01:30:43.310746]: Libstepper All Axis Abort
[1970-Jan-01 01:30:43.312637]: Clear Toolhead Buffer
[1970-Jan-01 01:30:43.342742]: Toolhead 0 state error: 0
[1970-Jan-01 01:30:43.344580]: clear toolhead buffer acknowledged
[1970-Jan-01 01:30:43.434604]: toolhead unpausing
[1970-Jan-01 01:30:43.436281]: quack pause: false
[1970-Jan-01 01:30:44.101361]: Expend Buffer: true
[1970-Jan-01 01:30:44.227054]: Last sync period had (0,309,2526) buffer fulls due to suspend moves
[1970-Jan-01 01:30:44.228935]: Syncing turned false
[1970-Jan-01 01:30:44.393914]: Toolhead 0  ADC Error: 0
[1970-Jan-01 01:30:44.435834]: GAP: Query->Await
[1970-Jan-01 01:30:44.472818]: TH0: Retreived step position 12976399
[1970-Jan-01 01:30:44.511322]: wait for PRU status in get position
[1970-Jan-01 01:30:44.513609]: wait for PRU status in get position
[1970-Jan-01 01:30:44.515287]: GAP: Await->Done(Query)
[1970-Jan-01 01:30:44.666867]: Suspend
[1970-Jan-01 01:30:44.668739]: Suspend index 14 found, A-pos 11.9611
[1970-Jan-01 01:30:50.082774]: GAP: Query->Await
[1970-Jan-01 01:30:50.114071]: TH0: Retreived step position 13107471
[1970-Jan-01 01:30:50.155199]: wait for PRU status in get position
[1970-Jan-01 01:30:50.156845]: wait for PRU status in get position
[1970-Jan-01 01:30:50.158452]: GAP: Await->Done(Query)
[1970-Jan-01 01:30:51.288737]: Heater manager Set Target Temperature to 195, index 0
[1970-Jan-01 01:30:51.290726]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:30:51.843073]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:30:55.506209]: Expend Buffer: false
[1970-Jan-01 01:30:55.552296]: Syncing turned true
[1970-Jan-01 01:30:55.582717]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 01:30:55.584409]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 01:30:55.702767]: Toolhead 0  ADC Error: 1
[1970-Jan-01 01:30:57.108611]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 01:30:57.110624]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 01:30:57.112375]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 01:30:57.114070]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 01:30:57.115739]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 01:30:57.117541]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 01:30:57.119238]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 01:30:57.122091]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 01:30:57.123803]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 01:30:57.125513]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 01:30:57.127185]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 01:30:58.534159]: Expend Buffer: false
[1970-Jan-01 01:31:06.224518]: Toolhead 0 state error: 81
[1970-Jan-01 01:31:07.883123]: GetCachedToolUsageStats called
[1970-Jan-01 01:31:07.927727]: toolhead pausing
[1970-Jan-01 01:31:07.929462]: Toolhead 0 : Retry: Waited 1.70314s from state change
[1970-Jan-01 01:31:07.934783]: Last sync period had (0,297,2109) buffer fulls due to suspend moves
[1970-Jan-01 01:31:07.936561]: Syncing turned false
[1970-Jan-01 01:31:07.938205]: quack pause: true
[1970-Jan-01 01:31:08.011960]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 01:31:08.053430]:  axis running: 0
[1970-Jan-01 01:31:08.614362]: Toolhead 0 state error: 0
[1970-Jan-01 01:31:08.758517]: CLEAR BUFFER FAIL! in libstepper::Abort()
[1970-Jan-01 01:31:08.761193]: Last sync period had (0,297,2109) buffer fulls due to suspend moves
[1970-Jan-01 01:31:08.763092]: Libstepper All Axis Abort
[1970-Jan-01 01:31:08.764777]: Clear Toolhead Buffer
[1970-Jan-01 01:31:08.817990]: clear toolhead buffer acknowledged
[1970-Jan-01 01:31:08.914598]: toolhead unpausing
[1970-Jan-01 01:31:08.916390]: quack pause: false
[1970-Jan-01 01:31:09.017340]: Expend Buffer: true
[1970-Jan-01 01:31:09.082991]: Last sync period had (0,297,2124) buffer fulls due to suspend moves
[1970-Jan-01 01:31:09.084822]: Syncing turned false
[1970-Jan-01 01:31:09.174150]: Toolhead 0  ADC Error: 0
[1970-Jan-01 01:31:09.695476]: GAP: Query->Await
[1970-Jan-01 01:31:09.808514]: TH0: Retreived step position 12845327
[1970-Jan-01 01:31:09.912058]: wait for PRU status in get position
[1970-Jan-01 01:31:09.913729]: wait for PRU status in get position
[1970-Jan-01 01:31:09.915504]: GAP: Await->Done(Query)
[1970-Jan-01 01:31:10.056316]: Suspend
[1970-Jan-01 01:31:10.058056]: Suspend index 15 found, A-pos 12.7863
[1970-Jan-01 01:31:13.255724]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:31:15.905958]: GAP: Query->Await
[1970-Jan-01 01:31:15.982767]: TH0: Retreived step position 12779791
[1970-Jan-01 01:31:16.027455]: wait for PRU status in get position
[1970-Jan-01 01:31:16.029125]: wait for PRU status in get position
[1970-Jan-01 01:31:16.041427]: GAP: Await->Done(Query)
[1970-Jan-01 01:31:17.280902]: Heater manager Set Target Temperature to 195, index 0
[1970-Jan-01 01:31:17.282675]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:31:17.797240]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:31:21.312880]: Expend Buffer: false
[1970-Jan-01 01:31:21.393382]: Syncing turned true
[1970-Jan-01 01:31:21.414360]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 01:31:21.420351]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 01:31:21.855661]: Toolhead 0  ADC Error: 1
[1970-Jan-01 01:31:22.725523]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 01:31:22.727271]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 01:31:22.728964]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 01:31:22.740973]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 01:31:22.742685]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 01:31:22.744448]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 01:31:22.746275]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 01:31:22.747959]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 01:31:22.749633]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 01:31:22.759225]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 01:31:22.761690]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 01:31:24.713234]: Expend Buffer: false
[1970-Jan-01 01:31:31.712336]: Toolhead 0 state error: 81
[1970-Jan-01 01:31:33.417140]: GetCachedToolUsageStats called
[1970-Jan-01 01:31:33.461001]: toolhead pausing
[1970-Jan-01 01:31:33.462876]: Toolhead 0 : Retry: Waited 1.74874s from state change
[1970-Jan-01 01:31:33.467693]: Last sync period had (0,294,2106) buffer fulls due to suspend moves
[1970-Jan-01 01:31:33.469599]: Syncing turned false
[1970-Jan-01 01:31:33.471715]: quack pause: true
[1970-Jan-01 01:31:33.487824]: Toolhead 0 state error: 0
[1970-Jan-01 01:31:33.505187]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 01:31:33.554517]: Toolhead 0 state error: 81
[1970-Jan-01 01:31:33.559529]: PRU Event: PRU_SUSPEND_DECEL_EXECUTED(270)
[1970-Jan-01 01:31:33.561424]: PRU Event: PRU_SUSPEND_DECEL_EXECUTED(270)
[1970-Jan-01 01:31:33.563110]: PRU Event: PRU_SUSPEND_DECEL_EXECUTED(270)
[1970-Jan-01 01:31:33.584290]:  axis running: 0
[1970-Jan-01 01:31:33.813481]: Last sync period had (0,294,2106) buffer fulls due to suspend moves
[1970-Jan-01 01:31:33.816077]: Libstepper All Axis Abort
[1970-Jan-01 01:31:33.817803]: Clear Toolhead Buffer
[1970-Jan-01 01:31:33.855981]: clear toolhead buffer acknowledged
[1970-Jan-01 01:31:33.973338]: toolhead unpausing
[1970-Jan-01 01:31:33.975148]: quack pause: false
[1970-Jan-01 01:31:34.591800]: Expend Buffer: true
[1970-Jan-01 01:31:34.645754]: Last sync period had (0,294,2124) buffer fulls due to suspend moves
[1970-Jan-01 01:31:34.647577]: Syncing turned false
[1970-Jan-01 01:31:34.697588]: Toolhead 0 state error: 0
[1970-Jan-01 01:31:34.762729]: Toolhead 0  ADC Error: 0
[1970-Jan-01 01:31:34.789853]: GAP: Query->Await
[1970-Jan-01 01:31:35.274520]: TH0: Retreived step position 12517647
[1970-Jan-01 01:31:35.298696]: wait for PRU status in get position
[1970-Jan-01 01:31:35.300743]: wait for PRU status in get position
[1970-Jan-01 01:31:35.302358]: GAP: Await->Done(Query)
[1970-Jan-01 01:31:35.625361]: Suspend
[1970-Jan-01 01:31:35.627241]: Suspend index 16 found, A-pos 12.7863
[1970-Jan-01 01:31:40.905525]: GAP: Query->Await
[1970-Jan-01 01:31:40.944100]: TH0: Retreived step position 12517647
[1970-Jan-01 01:31:40.974527]: wait for PRU status in get position
[1970-Jan-01 01:31:40.976830]: wait for PRU status in get position
[1970-Jan-01 01:31:40.978447]: GAP: Await->Done(Query)
[1970-Jan-01 01:31:42.570960]: Heater manager Set Target Temperature to 195, index 0
[1970-Jan-01 01:31:42.572725]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:31:43.147778]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:31:46.979730]: Expend Buffer: false
[1970-Jan-01 01:31:47.489854]: Syncing turned true
[1970-Jan-01 01:31:47.513884]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 01:31:47.515578]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 01:31:48.082778]: Toolhead 0  ADC Error: 1
[1970-Jan-01 01:31:48.864023]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 01:31:48.865752]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 01:31:48.867455]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 01:31:48.869266]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 01:31:48.871188]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 01:31:48.872869]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 01:31:48.874673]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 01:31:48.876390]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 01:31:48.878080]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 01:31:48.880565]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 01:31:48.882266]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 01:31:49.318455]: Expected packet id: 0x7b, Got packet id: 0x7a, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc2,0x0,0xf,0x14,0x3,0x1,0x0,0xc3,0x0,0x0,0xac,0x97,0x3,0x52,0x1,0x0,0x0,0x0,0x2,0x2,0x2a,0x0,0x7a,0x3b,0x37,0x3c,0xfd,

[1970-Jan-01 01:31:49.321460]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 01:31:49.327210]: Expected packet id: 0x7b, Got packet id: 0x7a, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc2,0x0,0xf,0x14,0x3,0x1,0x0,0xc3,0x0,0x0,0xac,0x97,0x3,0x52,0x1,0x0,0x0,0x0,0x2,0x2,0x2a,0x0,0x7a,0x3b,0x37,0x3c,0xfd,

[1970-Jan-01 01:31:49.329152]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 2
[1970-Jan-01 01:31:50.735653]: Expend Buffer: false
[1970-Jan-01 01:31:57.717161]: Toolhead 0 state error: 81
[1970-Jan-01 01:31:59.335301]: GetCachedToolUsageStats called
[1970-Jan-01 01:31:59.382795]: toolhead pausing
[1970-Jan-01 01:31:59.384560]: Toolhead 0 : Retry: Waited 1.66549s from state change
[1970-Jan-01 01:31:59.390574]: Last sync period had (0,291,2109) buffer fulls due to suspend moves
[1970-Jan-01 01:31:59.392515]: Syncing turned false
[1970-Jan-01 01:31:59.394192]: quack pause: true
[1970-Jan-01 01:31:59.447126]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 01:31:59.512065]:  axis running: 0
[1970-Jan-01 01:31:59.694069]:  axis running: 0
[1970-Jan-01 01:31:59.788552]:  axis running: 0
[1970-Jan-01 01:31:59.871660]:  axis running: 0
[1970-Jan-01 01:31:59.953933]:  axis running: 0
[1970-Jan-01 01:32:00.033995]:  axis running: 0
[1970-Jan-01 01:32:00.143058]:  axis running: 0
[1970-Jan-01 01:32:00.757080]: Toolhead 0 : Retry: Waited 0.65803s from state change
[1970-Jan-01 01:32:00.836432]:  axis running: 0
[1970-Jan-01 01:32:00.915914]:  axis running: 0
[1970-Jan-01 01:32:01.016024]:  axis running: 0
[1970-Jan-01 01:32:01.086487]:  axis running: 0
[1970-Jan-01 01:32:01.116486]: Toolhead 0 state error: 0
[1970-Jan-01 01:32:01.208745]: Last sync period had (0,291,2109) buffer fulls due to suspend moves
[1970-Jan-01 01:32:01.211530]: Libstepper All Axis Abort
[1970-Jan-01 01:32:01.213272]: Clear Toolhead Buffer
[1970-Jan-01 01:32:01.252015]: clear toolhead buffer acknowledged
[1970-Jan-01 01:32:01.303542]: toolhead unpausing
[1970-Jan-01 01:32:01.305229]: quack pause: false
[1970-Jan-01 01:32:01.965955]: Expend Buffer: true
[1970-Jan-01 01:32:02.029254]: Last sync period had (0,291,2127) buffer fulls due to suspend moves
[1970-Jan-01 01:32:02.031420]: Syncing turned false
[1970-Jan-01 01:32:02.084679]: Toolhead 0  ADC Error: 0
[1970-Jan-01 01:32:02.110661]: GAP: Query->Await
[1970-Jan-01 01:32:02.135506]: TH0: Retreived step position 12976399
[1970-Jan-01 01:32:02.154536]: wait for PRU status in get position
[1970-Jan-01 01:32:02.156193]: wait for PRU status in get position
[1970-Jan-01 01:32:02.157816]: GAP: Await->Done(Query)
[1970-Jan-01 01:32:02.237190]: Suspend
[1970-Jan-01 01:32:02.250407]: Suspend index 17 found, A-pos 17.1624
[1970-Jan-01 01:32:04.470354]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:32:07.345437]: GAP: Query->Await
[1970-Jan-01 01:32:07.371752]: TH0: Retreived step position 13041935
[1970-Jan-01 01:32:07.440199]: wait for PRU status in get position
[1970-Jan-01 01:32:07.441965]: wait for PRU status in get position
[1970-Jan-01 01:32:07.444232]: GAP: Await->Done(Query)
[1970-Jan-01 01:33:01.289765]: Toolhead 0 state error: 80
[1970-Jan-01 01:33:07.898576]: Toolhead 0 state error: 0
[1970-Jan-01 01:33:14.125079]: Heater manager Set Target Temperature to 195, index 0
[1970-Jan-01 01:33:14.126998]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:33:14.617820]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:33:16.408334]: Expend Buffer: false
[1970-Jan-01 01:33:16.911247]: Syncing turned true
[1970-Jan-01 01:33:16.927838]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 01:33:16.934452]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 01:33:17.390914]: Toolhead 0  ADC Error: 1
[1970-Jan-01 01:33:18.214336]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 01:33:18.216207]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 01:33:18.217874]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 01:33:18.219566]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 01:33:18.221578]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 01:33:18.223388]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 01:33:18.225076]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 01:33:18.227401]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 01:33:18.229089]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 01:33:18.231048]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 01:33:18.232737]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 01:33:18.348520]: Expected packet id: 0x49, Got packet id: 0x48, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc7,0x0,0xf,0x15,0xdd,0x1,0x0,0xc3,0x0,0x0,0xac,0x97,0x3,0x52,0x1,0x0,0x0,0x0,0x1,0xf0,0x69,0x0,0x48,0x44,0x9d,0x93,0xfd,

[1970-Jan-01 01:33:18.350770]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 01:33:18.714624]: Expected packet id: 0x87, Got packet id: 0x86, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc7,0x0,0xf,0x15,0xdd,0x1,0x0,0xc3,0x0,0x0,0xac,0x97,0x3,0x52,0x1,0x0,0x0,0x0,0x1,0xd7,0x5f,0x0,0x86,0x25,0x42,0x72,0xef,

[1970-Jan-01 01:33:18.716506]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 01:33:18.906053]: Expected packet id: 0xb5, Got packet id: 0xb4, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc7,0x0,0xf,0x15,0xdd,0x1,0x0,0xc3,0x0,0x0,0xac,0x97,0x3,0x52,0x1,0x0,0x0,0x0,0x1,0xca,0x29,0x0,0xb4,0x1f,0x9a,0xb8,0xcf,

[1970-Jan-01 01:33:18.907934]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 01:33:19.613013]: Expend Buffer: false
[1970-Jan-01 01:33:26.541795]: Toolhead 0 state error: 81
[1970-Jan-01 01:33:28.164221]: GetCachedToolUsageStats called
[1970-Jan-01 01:33:28.210224]: toolhead pausing
[1970-Jan-01 01:33:28.211988]: Toolhead 0 : Retry: Waited 1.6683s from state change
[1970-Jan-01 01:33:28.216545]: Last sync period had (0,294,2112) buffer fulls due to suspend moves
[1970-Jan-01 01:33:28.219138]: Syncing turned false
[1970-Jan-01 01:33:28.221232]: quack pause: true
[1970-Jan-01 01:33:28.273618]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 01:33:28.329439]:  axis running: 0
[1970-Jan-01 01:33:28.820433]: Toolhead 0 state error: 0
[1970-Jan-01 01:33:28.900809]: Last sync period had (0,294,2112) buffer fulls due to suspend moves
[1970-Jan-01 01:33:28.903244]: Libstepper All Axis Abort
[1970-Jan-01 01:33:28.904953]: Clear Toolhead Buffer
[1970-Jan-01 01:33:28.949031]: clear toolhead buffer acknowledged
[1970-Jan-01 01:33:29.132396]: toolhead unpausing
[1970-Jan-01 01:33:29.135139]: quack pause: false
[1970-Jan-01 01:33:29.785487]: Expend Buffer: true
[1970-Jan-01 01:33:29.905617]: Last sync period had (0,294,2133) buffer fulls due to suspend moves
[1970-Jan-01 01:33:29.907444]: Syncing turned false
[1970-Jan-01 01:33:30.003124]: Toolhead 0  ADC Error: 0
[1970-Jan-01 01:33:30.027329]: GAP: Query->Await
[1970-Jan-01 01:33:30.052373]: TH0: Retreived step position 12910863
[1970-Jan-01 01:33:30.072392]: wait for PRU status in get position
[1970-Jan-01 01:33:30.074081]: wait for PRU status in get position
[1970-Jan-01 01:33:30.076312]: GAP: Await->Done(Query)
[1970-Jan-01 01:33:30.176862]: Suspend
[1970-Jan-01 01:33:30.179008]: Suspend index 18 found, A-pos 18.251
[1970-Jan-01 01:33:34.595617]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:33:36.127036]: GAP: Query->Await
[1970-Jan-01 01:33:36.236791]: TH0: Retreived step position 12845327
[1970-Jan-01 01:33:36.270889]: wait for PRU status in get position
[1970-Jan-01 01:33:36.272545]: wait for PRU status in get position
[1970-Jan-01 01:33:36.274170]: GAP: Await->Done(Query)
[1970-Jan-01 01:33:47.195634]: Heater manager Set Target Temperature to 195, index 0
[1970-Jan-01 01:33:47.197538]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:33:47.695207]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:33:49.143258]: Expend Buffer: false
[1970-Jan-01 01:33:49.971862]: Syncing turned true
[1970-Jan-01 01:33:50.025274]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 01:33:50.027777]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 01:33:50.427653]: Toolhead 0  ADC Error: 1
[1970-Jan-01 01:33:51.025582]: Expected packet id: 0xd1, Got packet id: 0xd0, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc0,0x0,0xf,0x16,0x53,0x1,0x0,0xc3,0x0,0x0,0xac,0x97,0x3,0x52,0x1,0x0,0x0,0x0,0x2,0xb,0xc9,0x0,0xd0,0xa2,0x8a,0x25,0x3f,

[1970-Jan-01 01:33:51.027467]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 01:33:51.097667]: Expected packet id: 0xe3, Got packet id: 0xe2, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc0,0x0,0xf,0x16,0x53,0x1,0x0,0xc3,0x0,0x0,0xac,0x97,0x3,0x52,0x1,0x0,0x0,0x0,0x2,0x6,0xc8,0x0,0xe2,0x99,0xf5,0xc6,0x55,

[1970-Jan-01 01:33:51.099559]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 01:33:51.146193]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 01:33:51.147887]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 01:33:51.149520]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 01:33:51.152112]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 01:33:51.153771]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 01:33:51.155416]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 01:33:51.157178]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 01:33:51.159711]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 01:33:51.161658]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 01:33:51.163308]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 01:33:51.165408]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 01:33:52.141276]: Expected packet id: 0x6f, Got packet id: 0x6e, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc0,0x0,0xf,0x16,0x53,0x1,0x0,0xc3,0x0,0x0,0xac,0x97,0x3,0x52,0x1,0x0,0x0,0x0,0x1,0xbf,0x39,0x0,0x6e,0xee,0x27,0x6b,0x79,

[1970-Jan-01 01:33:52.144267]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 01:33:52.844838]: Expend Buffer: false
[1970-Jan-01 01:33:59.623860]: Toolhead 0 state error: 81
[1970-Jan-01 01:33:59.794542]: GetCachedToolUsageStats called
[1970-Jan-01 01:34:01.256768]: toolhead pausing
[1970-Jan-01 01:34:01.258578]: Toolhead 0 : Retry: Waited 1.63292s from state change
[1970-Jan-01 01:34:01.270443]: Last sync period had (0,291,2112) buffer fulls due to suspend moves
[1970-Jan-01 01:34:01.272244]: Syncing turned false
[1970-Jan-01 01:34:01.273883]: quack pause: true
[1970-Jan-01 01:34:01.294457]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 01:34:01.322398]:  axis running: 0
[1970-Jan-01 01:34:01.488945]:  axis running: 0
[1970-Jan-01 01:34:01.571950]:  axis running: 0
[1970-Jan-01 01:34:01.641066]:  axis running: 0
[1970-Jan-01 01:34:01.719610]:  axis running: 0
[1970-Jan-01 01:34:01.813131]:  axis running: 0
[1970-Jan-01 01:34:01.890228]:  axis running: 0
[1970-Jan-01 01:34:02.009069]:  axis running: 0
[1970-Jan-01 01:34:02.110196]:  axis running: 0
[1970-Jan-01 01:34:02.187044]:  axis running: 0
[1970-Jan-01 01:34:02.245196]:  axis running: 0
[1970-Jan-01 01:34:02.762380]:  axis running: 0
[1970-Jan-01 01:34:02.896785]:  axis running: 0
[1970-Jan-01 01:34:02.987952]:  axis running: 0
[1970-Jan-01 01:34:03.053576]: Toolhead 0 state error: 0
[1970-Jan-01 01:34:03.620447]: Last sync period had (0,291,2112) buffer fulls due to suspend moves
[1970-Jan-01 01:34:03.623048]: Libstepper All Axis Abort
[1970-Jan-01 01:34:03.624740]: Clear Toolhead Buffer
[1970-Jan-01 01:34:03.662675]: clear toolhead buffer acknowledged
[1970-Jan-01 01:34:03.810315]: toolhead unpausing
[1970-Jan-01 01:34:03.812068]: quack pause: false
[1970-Jan-01 01:34:03.937441]: Expend Buffer: true
[1970-Jan-01 01:34:03.985603]: Last sync period had (0,291,2130) buffer fulls due to suspend moves
[1970-Jan-01 01:34:03.987412]: Syncing turned false
[1970-Jan-01 01:34:04.089416]: Toolhead 0  ADC Error: 0
[1970-Jan-01 01:34:04.130422]: GAP: Query->Await
[1970-Jan-01 01:34:04.160720]: TH0: Retreived step position 12648719
[1970-Jan-01 01:34:04.189688]: wait for PRU status in get position
[1970-Jan-01 01:34:04.192970]: wait for PRU status in get position
[1970-Jan-01 01:34:04.199103]: GAP: Await->Done(Query)
[1970-Jan-01 01:34:04.962778]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 01:34:04.964638]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:34:14.719942]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:34:16.121419]: Last sync period had (0,291,2511) buffer fulls due to suspend moves
[1970-Jan-01 01:34:16.123374]: Syncing turned false
[1970-Jan-01 01:34:16.125119]: TH0: 143 failures in last 2789 packets (5.12729%)
[1970-Jan-01 01:34:16.128129]: Toolhead Abort
[1970-Jan-01 01:34:16.129847]: aborting pru with shutdown=true
[1970-Jan-01 01:34:16.146837]: Last sync period had (0,291,2511) buffer fulls due to suspend moves
[1970-Jan-01 01:34:16.148780]: Libstepper All Axis Abort
[1970-Jan-01 01:34:16.156664]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 01:34:16.159016]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:34:16.277634]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 01:34:16.279423]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:34:16.389333]: Commanding stats update: Retract count: 6290
[1970-Jan-01 01:34:16.398942]: Toolhead 0 marked as possibly blocking!
[1970-Jan-01 01:34:17.448466]: Toolhead 0 done blocking!
[1970-Jan-01 01:34:17.636484]: GetToolUsageStats called in machine  state 0
[1970-Jan-01 01:34:17.638363]: Commanding tool usage stat retrieve
[1970-Jan-01 01:34:17.640197]: GetToolUsageState: Proceeds to 1
[1970-Jan-01 01:34:17.641835]: GetToolUsagState: Error from retrieve: 0x10a
[1970-Jan-01 01:34:17.694018]: Raw usage stats: retract 12568ct, extrusion 621509 steps, 3063 seconds, refurbed 0 times
[1970-Jan-01 01:34:17.733841]: GetToolUsageStats called in machine  state 1
[1970-Jan-01 01:34:17.735582]: VerifyToolUsageStatsRetrieved: Done
[1970-Jan-01 01:34:17.737199]: GetToolUsageState: Proceeds to 2
[1970-Jan-01 01:34:17.781806]: GetToolUsageStats called in machine  state 2
[1970-Jan-01 01:34:17.783553]: GetToolUsageState: Done, resets
[1970-Jan-01 01:36:30.808126]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 01:36:30.820534]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:36:32.043495]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:38:27.239782]: GetCachedToolUsageStats called
[1970-Jan-01 01:38:36.475665]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:38:43.971802]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:38:52.051367]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:39:00.035151]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:39:07.639537]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:39:15.617436]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:39:20.144837]: Raw HES proceeding
[1970-Jan-01 01:39:20.192818]: Got raw val 24016, saturated: true
[1970-Jan-01 01:39:20.217796]: Returning HES
[1970-Jan-01 01:39:20.219446]: Sending back val 24016, saturated true
[1970-Jan-01 01:39:20.528144]: GetCachedToolUsageStats called
[1970-Jan-01 01:39:20.556078]: Toolhead Abort
[1970-Jan-01 01:39:20.557842]: aborting pru with shutdown=true
[1970-Jan-01 01:39:20.560400]: Last sync period had (0,291,10500) buffer fulls due to suspend moves
[1970-Jan-01 01:39:20.562300]: Libstepper All Axis Abort
[1970-Jan-01 01:39:37.901287]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 01:39:37.903093]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:39:53.594285]: GetCachedToolUsageStats called
[1970-Jan-01 01:39:54.117261]: Heater manager Set Target Temperature to 180, index 0
[1970-Jan-01 01:39:54.119029]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:39:55.435225]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false
[1970-Jan-01 01:39:55.437212]: Load Sense Limit Method: 1
[1970-Jan-01 01:39:55.439818]: Last sync period had (0,291,10755) buffer fulls due to suspend moves
[1970-Jan-01 01:39:55.441881]: Libstepper All Axis Abort
[1970-Jan-01 01:39:56.527194]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 01:39:56.529152]: Toolhead Abort
[1970-Jan-01 01:39:56.536503]: aborting pru with shutdown=true
[1970-Jan-01 01:39:56.539051]: Last sync period had (0,291,10767) buffer fulls due to suspend moves
[1970-Jan-01 01:39:56.541052]: Libstepper All Axis Abort
[1970-Jan-01 01:39:56.678003]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 01:39:58.863818]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false
[1970-Jan-01 01:39:58.865902]: Load Sense Limit Method: 0
[1970-Jan-01 01:39:58.875276]: Last sync period had (0,291,10827) buffer fulls due to suspend moves
[1970-Jan-01 01:39:58.877056]: Libstepper All Axis Abort
[1970-Jan-01 01:39:59.681761]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 01:39:59.684274]: Toolhead Abort
[1970-Jan-01 01:39:59.685997]: aborting pru with shutdown=true
[1970-Jan-01 01:39:59.696004]: Last sync period had (0,291,10854) buffer fulls due to suspend moves
[1970-Jan-01 01:39:59.697917]: Libstepper All Axis Abort
[1970-Jan-01 01:39:59.776893]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 01:40:01.016149]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:40:44.884061]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:40:56.428787]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:41:02.062418]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false
[1970-Jan-01 01:41:09.320563]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:41:18.362962]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:41:20.813382]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-01 01:41:20.815207]: Toolhead Abort
[1970-Jan-01 01:41:20.817095]: aborting pru with shutdown=false
[1970-Jan-01 01:41:20.820836]: Last sync period had (0,291,13869) buffer fulls due to suspend moves
[1970-Jan-01 01:41:20.822635]: Libstepper All Axis Abort
[1970-Jan-01 01:41:20.923141]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-01 01:41:21.106939]: HES logged: true
[1970-Jan-01 01:41:30.744972]: GAP: Query->Await
[1970-Jan-01 01:41:30.787690]: TH0: Retreived step position 11403535
[1970-Jan-01 01:41:30.825083]: wait for PRU status in get position
[1970-Jan-01 01:41:30.826757]: wait for PRU status in get position
[1970-Jan-01 01:41:30.828371]: GAP: Await->Done(Query)
[1970-Jan-01 01:41:30.889885]: Changing HES sample rate. Commanded: 30Hz; clamped to 30.7143Hz (215/7)
[1970-Jan-01 01:41:31.009340]: Syncing turned true
[1970-Jan-01 01:41:31.041268]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 01:41:31.197323]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 01:41:31.211987]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 01:41:31.213681]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 01:41:31.215364]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 01:41:31.217190]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 01:41:31.218880]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 01:41:31.230855]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 01:41:31.232569]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 01:41:31.235059]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 01:41:31.237029]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 01:41:31.238706]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 01:41:31.250684]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 01:41:31.275647]: Toolhead 0 commands idle
[1970-Jan-01 01:41:31.295295]: Toolhead 0  ADC Error: 1
[1970-Jan-01 01:41:35.399276]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:41:38.471545]: Buffer stall ongoing: 29025
[1970-Jan-01 01:41:38.553820]: Buffer stall ongoing: 46311
[1970-Jan-01 01:41:38.656671]: Last sync period had (0,0,300) buffer fulls due to suspend moves
[1970-Jan-01 01:41:38.659169]: Syncing turned false
[1970-Jan-01 01:41:38.856897]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 01:41:38.858679]: Buffer stall ongoing: 68628
[1970-Jan-01 01:41:38.937720]: Toolhead 0  ADC Error: 0
[1970-Jan-01 01:41:40.038400]: HES logged: true
[1970-Jan-01 01:41:40.403447]: GetCachedToolUsageStats called
[1970-Jan-01 01:41:43.537205]: GAP: Query->Await
[1970-Jan-01 01:41:43.571471]: TH0: Retreived step position 11796751
[1970-Jan-01 01:41:43.593645]: wait for PRU status in get position
[1970-Jan-01 01:41:43.595323]: wait for PRU status in get position
[1970-Jan-01 01:41:43.596933]: GAP: Await->Done(Query)
[1970-Jan-01 01:41:45.560787]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:41:51.627630]: Changing HES sample rate. Commanded: 215Hz; clamped to 215Hz (215/1)
[1970-Jan-01 01:41:52.422430]: GetCachedToolUsageStats called
[1970-Jan-01 01:41:52.639057]: Expecting 504055 steps extruded this print from 4643.52 mm of plastic
[1970-Jan-01 01:41:52.971086]: Heater manager Set Target Temperature to 195, index 0
[1970-Jan-01 01:41:52.973702]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:41:53.228514]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:42:22.669399]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:42:23.459076]: Expend Buffer: false
[1970-Jan-01 01:42:23.558231]: Syncing turned true
[1970-Jan-01 01:42:23.644946]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 01:42:23.646634]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 01:42:23.983357]: Toolhead 0  ADC Error: 1
[1970-Jan-01 01:42:24.241396]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 01:42:24.243282]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 01:42:24.244966]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 01:42:24.246642]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 01:42:24.248315]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 01:42:24.285279]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 01:42:24.291729]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 01:42:24.294089]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 01:42:24.295839]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 01:42:24.297514]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 01:42:24.299191]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 01:42:24.618112]: Expected packet id: 0xe0, Got packet id: 0xdf, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc2,0x0,0xf,0xa2,0x12,0x1,0x0,0xc3,0x0,0x0,0xac,0x97,0x3,0x52,0x1,0x0,0x0,0x0,0x0,0x0,0x5f,0x0,0xdf,0xce,0x30,0xc7,0x4f,

[1970-Jan-01 01:42:24.620343]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 01:42:25.674967]: Expected packet id: 0x7f, Got packet id: 0x7e, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc2,0x0,0xf,0xa2,0x84,0x1,0x0,0xc3,0x0,0x0,0xac,0x97,0x3,0x52,0x1,0x0,0x0,0x0,0x0,0x2,0xd9,0x0,0x7e,0x34,0xdf,0x13,0xc1,

[1970-Jan-01 01:42:25.677025]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 01:42:28.349375]: Toolhead 0 state error: 81
[1970-Jan-01 01:42:30.089684]: GetCachedToolUsageStats called
[1970-Jan-01 01:42:30.136858]: toolhead pausing
[1970-Jan-01 01:42:30.138615]: Toolhead 0 : Retry: Waited 1.70045s from state change
[1970-Jan-01 01:42:30.143764]: Last sync period had (0,231,2337) buffer fulls due to suspend moves
[1970-Jan-01 01:42:30.145556]: Syncing turned false
[1970-Jan-01 01:42:30.147214]: quack pause: true
[1970-Jan-01 01:42:30.235175]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 01:42:30.490227]: Last sync period had (0,231,2337) buffer fulls due to suspend moves
[1970-Jan-01 01:42:30.493375]: Libstepper All Axis Abort
[1970-Jan-01 01:42:30.495087]: Clear Toolhead Buffer
[1970-Jan-01 01:42:30.523044]: clear toolhead buffer acknowledged
[1970-Jan-01 01:42:30.615941]: toolhead unpausing
[1970-Jan-01 01:42:30.617766]: quack pause: false
[1970-Jan-01 01:42:30.645266]: Toolhead 0 state error: 0
[1970-Jan-01 01:42:30.747946]: Expend Buffer: true
[1970-Jan-01 01:42:30.798647]: Last sync period had (0,231,2352) buffer fulls due to suspend moves
[1970-Jan-01 01:42:30.801644]: Syncing turned false
[1970-Jan-01 01:42:31.340955]: Toolhead 0  ADC Error: 0
[1970-Jan-01 01:42:31.422672]: GAP: Query->Await
[1970-Jan-01 01:42:31.458366]: TH0: Retreived step position 12845327
[1970-Jan-01 01:42:31.497993]: wait for PRU status in get position
[1970-Jan-01 01:42:31.499796]: wait for PRU status in get position
[1970-Jan-01 01:42:31.511774]: GAP: Await->Done(Query)
[1970-Jan-01 01:42:31.643054]: Suspend
[1970-Jan-01 01:42:31.645983]: Suspend index 14 found, A-pos 11.9611
[1970-Jan-01 01:42:37.106658]: GAP: Query->Await
[1970-Jan-01 01:42:37.142830]: TH0: Retreived step position 13041935
[1970-Jan-01 01:42:37.183670]: wait for PRU status in get position
[1970-Jan-01 01:42:37.185355]: wait for PRU status in get position
[1970-Jan-01 01:42:37.186968]: GAP: Await->Done(Query)
[1970-Jan-01 01:42:38.846633]: Heater manager Set Target Temperature to 195, index 0
[1970-Jan-01 01:42:38.848459]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:42:39.356995]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:42:42.518356]: Expend Buffer: false
[1970-Jan-01 01:42:42.578521]: Syncing turned true
[1970-Jan-01 01:42:42.631433]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 01:42:42.633143]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 01:42:43.057582]: Toolhead 0  ADC Error: 1
[1970-Jan-01 01:42:43.817600]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 01:42:43.819432]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 01:42:43.821546]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 01:42:43.823208]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 01:42:43.824865]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 01:42:43.826644]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 01:42:43.828287]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 01:42:43.829944]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 01:42:43.831816]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 01:42:43.833609]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 01:42:43.835277]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 01:42:44.309349]: Expected packet id: 0xde, Got packet id: 0xdd, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc8,0x0,0xf,0xa7,0x7e,0x1,0x0,0xc3,0x0,0x0,0xac,0x97,0x3,0x52,0x1,0x0,0x0,0x0,0x2,0x11,0x3e,0x0,0xdd,0xb6,0xae,0xae,0x65,

[1970-Jan-01 01:42:44.311499]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 01:42:45.299719]: Expend Buffer: false
[1970-Jan-01 01:42:52.945433]: Toolhead 0 state error: 81
[1970-Jan-01 01:42:54.616557]: GetCachedToolUsageStats called
[1970-Jan-01 01:42:54.661345]: toolhead pausing
[1970-Jan-01 01:42:54.663057]: Toolhead 0 : Retry: Waited 1.71582s from state change
[1970-Jan-01 01:42:54.667567]: Last sync period had (0,186,1650) buffer fulls due to suspend moves
[1970-Jan-01 01:42:54.669377]: Syncing turned false
[1970-Jan-01 01:42:54.671317]: quack pause: true
[1970-Jan-01 01:42:54.738792]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 01:42:55.348242]: Toolhead 0 state error: 0
[1970-Jan-01 01:42:55.467656]: Last sync period had (0,186,1650) buffer fulls due to suspend moves
[1970-Jan-01 01:42:55.470460]: Libstepper All Axis Abort
[1970-Jan-01 01:42:55.472196]: Clear Toolhead Buffer
[1970-Jan-01 01:42:55.514167]: clear toolhead buffer acknowledged
[1970-Jan-01 01:42:55.608272]: toolhead unpausing
[1970-Jan-01 01:42:55.610460]: quack pause: false
[1970-Jan-01 01:42:55.727551]: Expend Buffer: true
[1970-Jan-01 01:42:55.797714]: Last sync period had (0,186,1665) buffer fulls due to suspend moves
[1970-Jan-01 01:42:55.799666]: Syncing turned false
[1970-Jan-01 01:42:55.881605]: Toolhead 0  ADC Error: 0
[1970-Jan-01 01:42:55.927455]: GAP: Query->Await
[1970-Jan-01 01:42:56.406195]: TH0: Retreived step position 13041935
[1970-Jan-01 01:42:56.506545]: wait for PRU status in get position
[1970-Jan-01 01:42:56.508913]: wait for PRU status in get position
[1970-Jan-01 01:42:56.510783]: GAP: Await->Done(Query)
[1970-Jan-01 01:42:56.679583]: Suspend
[1970-Jan-01 01:42:56.691851]: Suspend index 15 found, A-pos 12.7863
[1970-Jan-01 01:43:00.826343]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:43:02.350445]: GAP: Query->Await
[1970-Jan-01 01:43:02.376526]: TH0: Retreived step position 12845327
[1970-Jan-01 01:43:02.401910]: wait for PRU status in get position
[1970-Jan-01 01:43:02.403706]: wait for PRU status in get position
[1970-Jan-01 01:43:02.405314]: GAP: Await->Done(Query)
[1970-Jan-01 01:43:03.548154]: Heater manager Set Target Temperature to 195, index 0
[1970-Jan-01 01:43:03.549955]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:43:04.258443]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:43:07.775137]: Expend Buffer: false
[1970-Jan-01 01:43:07.808942]: Syncing turned true
[1970-Jan-01 01:43:07.826090]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 01:43:07.827797]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 01:43:08.380776]: Toolhead 0  ADC Error: 1
[1970-Jan-01 01:43:09.158801]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 01:43:09.160727]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 01:43:09.162528]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 01:43:09.164200]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 01:43:09.165926]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 01:43:09.167591]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 01:43:09.169380]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 01:43:09.183650]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 01:43:09.185396]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 01:43:09.187196]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 01:43:09.188860]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 01:43:11.086917]: Expend Buffer: false
[1970-Jan-01 01:43:18.121878]: Toolhead 0 state error: 81
[1970-Jan-01 01:43:19.767224]: GetCachedToolUsageStats called
[1970-Jan-01 01:43:19.814331]: toolhead pausing
[1970-Jan-01 01:43:19.816069]: Toolhead 0 : Retry: Waited 1.69241s from state change
[1970-Jan-01 01:43:19.821119]: Last sync period had (0,183,1638) buffer fulls due to suspend moves
[1970-Jan-01 01:43:19.823498]: Syncing turned false
[1970-Jan-01 01:43:19.825144]: quack pause: true
[1970-Jan-01 01:43:19.869951]: Toolhead 0 state error: 0
[1970-Jan-01 01:43:19.887943]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 01:43:20.004472]:  axis running: 0
[1970-Jan-01 01:43:20.293705]: PRU Event: PRU_SUSPEND_DECEL_EXECUTED(270)
[1970-Jan-01 01:43:20.295397]: PRU Event: PRU_SUSPEND_DECEL_EXECUTED(270)
[1970-Jan-01 01:43:20.297060]: PRU Event: PRU_SUSPEND_DECEL_EXECUTED(270)
[1970-Jan-01 01:43:20.414219]: Last sync period had (0,183,1638) buffer fulls due to suspend moves
[1970-Jan-01 01:43:20.416891]: Libstepper All Axis Abort
[1970-Jan-01 01:43:20.418592]: Clear Toolhead Buffer
[1970-Jan-01 01:43:20.461437]: clear toolhead buffer acknowledged
[1970-Jan-01 01:43:20.601150]: toolhead unpausing
[1970-Jan-01 01:43:20.602828]: quack pause: false
[1970-Jan-01 01:43:21.342497]: Expend Buffer: true
[1970-Jan-01 01:43:21.532476]: Last sync period had (0,183,1659) buffer fulls due to suspend moves
[1970-Jan-01 01:43:21.534300]: Syncing turned false
[1970-Jan-01 01:43:21.682649]: Toolhead 0  ADC Error: 0
[1970-Jan-01 01:43:21.723202]: GAP: Query->Await
[1970-Jan-01 01:43:21.763444]: TH0: Retreived step position 12517647
[1970-Jan-01 01:43:21.853559]: wait for PRU status in get position
[1970-Jan-01 01:43:21.855245]: wait for PRU status in get position
[1970-Jan-01 01:43:21.856951]: GAP: Await->Done(Query)
[1970-Jan-01 01:43:21.981174]: Suspend
[1970-Jan-01 01:43:21.982914]: Suspend index 16 found, A-pos 12.7863
[1970-Jan-01 01:43:27.703765]: GAP: Query->Await
[1970-Jan-01 01:43:27.715865]: TH0: Retreived step position 12452111
[1970-Jan-01 01:43:27.749013]: wait for PRU status in get position
[1970-Jan-01 01:43:27.761009]: wait for PRU status in get position
[1970-Jan-01 01:43:27.762671]: GAP: Await->Done(Query)
[1970-Jan-01 01:43:28.921136]: Heater manager Set Target Temperature to 195, index 0
[1970-Jan-01 01:43:28.922971]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:43:29.437789]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:43:36.642475]: Expend Buffer: false
[1970-Jan-01 01:43:37.330367]: Syncing turned true
[1970-Jan-01 01:43:37.373701]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 01:43:37.375422]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 01:43:37.920649]: Toolhead 0  ADC Error: 1
[1970-Jan-01 01:43:39.007612]: Expected packet id: 0x12, Got packet id: 0x11, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc2,0x0,0xf,0xa7,0xd8,0x1,0x0,0xc3,0x0,0x0,0xac,0x97,0x3,0x52,0x1,0x0,0x0,0x0,0x2,0x29,0xed,0x0,0x11,0x52,0x4a,0x4e,0x41,

[1970-Jan-01 01:43:39.009519]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 01:43:39.140539]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 01:43:39.142262]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 01:43:39.143929]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 01:43:39.145622]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 01:43:39.147420]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 01:43:39.149066]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 01:43:39.151608]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 01:43:39.153299]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 01:43:39.154957]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 01:43:39.156695]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 01:43:39.158484]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 01:43:39.543535]: Expected packet id: 0x70, Got packet id: 0x6f, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc2,0x0,0xf,0xa7,0xd8,0x1,0x0,0xc3,0x0,0x0,0xac,0x97,0x3,0x52,0x1,0x0,0x0,0x0,0x2,0x5,0x23,0x0,0x6f,0x94,0x22,0xb9,0xb6,

[1970-Jan-01 01:43:39.545436]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 01:43:40.325925]: Expend Buffer: false
[1970-Jan-01 01:43:47.958259]: Toolhead 0 state error: 81
[1970-Jan-01 01:43:49.609722]: GetCachedToolUsageStats called
[1970-Jan-01 01:43:49.944131]: Toolhead 0 : Retry: Waited 1.95106s from state change
[1970-Jan-01 01:43:50.021170]: toolhead pausing
[1970-Jan-01 01:43:50.025438]: Last sync period had (0,183,1641) buffer fulls due to suspend moves
[1970-Jan-01 01:43:50.027315]: Syncing turned false
[1970-Jan-01 01:43:50.028940]: quack pause: true
[1970-Jan-01 01:43:50.081794]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 01:43:50.202046]:  axis running: 0
[1970-Jan-01 01:43:50.534374]:  axis running: 0
[1970-Jan-01 01:43:50.640730]:  axis running: 0
[1970-Jan-01 01:43:50.822722]:  axis running: 0
[1970-Jan-01 01:43:50.912543]:  axis running: 0
[1970-Jan-01 01:43:50.994471]:  axis running: 0
[1970-Jan-01 01:43:51.570776]: Toolhead 0 state error: 0
[1970-Jan-01 01:43:51.658962]: Last sync period had (0,183,1641) buffer fulls due to suspend moves
[1970-Jan-01 01:43:51.661904]: Libstepper All Axis Abort
[1970-Jan-01 01:43:51.663629]: Clear Toolhead Buffer
[1970-Jan-01 01:43:51.737459]: clear toolhead buffer acknowledged
[1970-Jan-01 01:43:51.836809]: toolhead unpausing
[1970-Jan-01 01:43:51.838509]: quack pause: false
[1970-Jan-01 01:43:51.914143]: Expend Buffer: true
[1970-Jan-01 01:43:51.981901]: Last sync period had (0,183,1656) buffer fulls due to suspend moves
[1970-Jan-01 01:43:51.983736]: Syncing turned false
[1970-Jan-01 01:43:52.379147]: Toolhead 0  ADC Error: 0
[1970-Jan-01 01:43:52.399809]: GAP: Query->Await
[1970-Jan-01 01:43:52.431850]: TH0: Retreived step position 12910863
[1970-Jan-01 01:43:52.507077]: wait for PRU status in get position
[1970-Jan-01 01:43:52.508891]: wait for PRU status in get position
[1970-Jan-01 01:43:52.510771]: GAP: Await->Done(Query)
[1970-Jan-01 01:43:52.605233]: Suspend
[1970-Jan-01 01:43:52.606974]: Suspend index 17 found, A-pos 17.1624
[1970-Jan-01 01:43:53.446583]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:43:57.682262]: GAP: Query->Await
[1970-Jan-01 01:43:57.695337]: TH0: Retreived step position 12976399
[1970-Jan-01 01:43:57.731647]: wait for PRU status in get position
[1970-Jan-01 01:43:57.733314]: wait for PRU status in get position
[1970-Jan-01 01:43:57.734928]: GAP: Await->Done(Query)
[1970-Jan-01 01:45:50.791662]: GetCachedToolUsageStats called
[1970-Jan-01 01:45:52.333756]: toolhead pausing
[1970-Jan-01 01:45:52.338120]: Last sync period had (0,183,3219) buffer fulls due to suspend moves
[1970-Jan-01 01:45:52.339910]: Syncing turned false
[1970-Jan-01 01:45:52.349231]: quack pause: true
[1970-Jan-01 01:45:52.546614]: Last sync period had (0,183,3228) buffer fulls due to suspend moves
[1970-Jan-01 01:45:52.548413]: Libstepper All Axis Abort
[1970-Jan-01 01:45:52.555643]: Clear Toolhead Buffer
[1970-Jan-01 01:45:52.613627]: clear toolhead buffer acknowledged
[1970-Jan-01 01:45:52.718057]: toolhead unpausing
[1970-Jan-01 01:45:52.719749]: quack pause: false
[1970-Jan-01 01:45:52.848454]: Expend Buffer: true
[1970-Jan-01 01:45:52.894376]: Last sync period had (0,183,3243) buffer fulls due to suspend moves
[1970-Jan-01 01:45:52.896178]: Syncing turned false
[1970-Jan-01 01:45:53.696567]: GAP: Query->Await
[1970-Jan-01 01:45:53.749114]: TH0: Retreived step position 12910863
[1970-Jan-01 01:45:53.766639]: wait for PRU status in get position
[1970-Jan-01 01:45:53.768317]: wait for PRU status in get position
[1970-Jan-01 01:45:53.775449]: GAP: Await->Done(Query)
[1970-Jan-01 01:45:53.963631]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 01:45:53.965421]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:45:58.207953]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:46:01.619382]: Last sync period had (0,183,3516) buffer fulls due to suspend moves
[1970-Jan-01 01:46:01.621464]: Syncing turned false
[1970-Jan-01 01:46:01.623360]: TH0: 82 failures in last 2052 packets (3.9961%)
[1970-Jan-01 01:46:01.629354]: Toolhead Abort
[1970-Jan-01 01:46:01.631435]: aborting pru with shutdown=true
[1970-Jan-01 01:46:01.634291]: Last sync period had (0,183,3516) buffer fulls due to suspend moves
[1970-Jan-01 01:46:01.636095]: Libstepper All Axis Abort
[1970-Jan-01 01:46:01.637894]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 01:46:01.639623]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:46:01.751420]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 01:46:01.753257]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:46:01.829305]: Commanding stats update: Retract count: 12572
[1970-Jan-01 01:46:01.835201]: Toolhead 0 marked as possibly blocking!
[1970-Jan-01 01:46:02.475672]: Toolhead 0 done blocking!
[1970-Jan-01 01:46:02.607360]: GetToolUsageStats called in machine  state 0
[1970-Jan-01 01:46:02.609277]: Commanding tool usage stat retrieve
[1970-Jan-01 01:46:02.611188]: GetToolUsageState: Proceeds to 1
[1970-Jan-01 01:46:02.612850]: GetToolUsagState: Error from retrieve: 0x10a
[1970-Jan-01 01:46:03.092843]: Raw usage stats: retract 25140ct, extrusion 672635 steps, 3141 seconds, refurbed 0 times
[1970-Jan-01 01:46:03.159723]: GetToolUsageStats called in machine  state 1
[1970-Jan-01 01:46:03.161693]: VerifyToolUsageStatsRetrieved: Done
[1970-Jan-01 01:46:03.163341]: GetToolUsageState: Proceeds to 2
[1970-Jan-01 01:46:03.246473]: GetToolUsageStats called in machine  state 2
[1970-Jan-01 01:46:03.248392]: GetToolUsageState: Done, resets
[1970-Jan-13 22:07:34.322455]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-13 22:07:34.324214]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-13 22:07:35.559664]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-13 22:10:29.448735]: GetCachedToolUsageStats called
[1970-Jan-13 22:10:33.556438]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-13 22:10:37.969276]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-13 22:10:42.363442]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-13 22:10:46.522364]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-13 22:10:50.841592]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-13 22:10:55.161187]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-13 22:10:59.412742]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-13 22:11:03.450818]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-13 22:11:08.000295]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-13 22:11:12.258854]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-13 22:11:13.881345]:  wait for axis 0 full: false offset: 90 l3map offset:    90 status: 1 position 2303 status count 1001
[1970-Jan-13 22:11:16.720816]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-13 22:11:22.493920]: Raw HES proceeding
[1970-Jan-13 22:11:22.540618]: Got raw val 24021, saturated: true
[1970-Jan-13 22:11:22.565995]: Returning HES
[1970-Jan-13 22:11:22.567684]: Sending back val 24021, saturated true
[1970-Jan-13 22:11:22.886990]: GetCachedToolUsageStats called
[1970-Jan-13 22:11:22.938952]: Toolhead Abort
[1970-Jan-13 22:11:22.945518]: aborting pru with shutdown=true
[1970-Jan-13 22:11:22.948262]: Last sync period had (0,183,6409995) buffer fulls due to suspend moves
[1970-Jan-13 22:11:22.951477]: Libstepper All Axis Abort
[1970-Jan-13 22:13:40.598045]: Toolhead 0 state error: 56
[1970-Jan-13 22:13:43.113863]: Toolhead 0 state error: 0
[1970-Jan-13 22:14:00.373319]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-13 22:14:00.375090]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-13 22:14:01.754050]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-13 22:14:37.498716]: GetCachedToolUsageStats called
[1970-Jan-13 22:14:39.127623]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-13 22:14:43.244738]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-13 22:14:47.707666]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-13 22:14:52.081553]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-13 22:14:56.579842]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-13 22:15:00.634815]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-13 22:15:04.837993]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-13 22:15:09.471498]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-13 22:15:10.410421]: Toolhead 0 state error: 80
[1970-Jan-13 22:15:12.649755]: GetCachedToolUsageStats called
[1970-Jan-13 22:15:12.684967]: Toolhead Abort
[1970-Jan-13 22:15:12.686736]: aborting pru with shutdown=true
[1970-Jan-13 22:15:12.689716]: CLEAR BUFFER FAIL! in libstepper::Abort()
[1970-Jan-13 22:15:12.692562]: Last sync period had (0,183,6416223) buffer fulls due to suspend moves
[1970-Jan-13 22:15:12.694362]: Libstepper All Axis Abort
[1970-Jan-13 22:15:13.394425]: GetCachedToolUsageStats called
[1970-Jan-13 22:15:16.669114]: Toolhead 0 state error: 0
[1970-Jan-13 22:15:26.724393]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-13 22:15:29.909884]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-13 22:15:34.568394]: Raw HES proceeding
[1970-Jan-13 22:15:34.622629]: Got raw val 24006, saturated: true
[1970-Jan-13 22:15:34.647255]: Returning HES
[1970-Jan-13 22:15:34.648941]: Sending back val 24006, saturated true
[1970-Jan-13 22:15:34.966692]: GetCachedToolUsageStats called
[1970-Jan-13 22:15:35.022028]: Toolhead Abort
[1970-Jan-13 22:15:35.024219]: aborting pru with shutdown=true
[1970-Jan-13 22:15:35.030851]: Last sync period had (0,183,6418059) buffer fulls due to suspend moves
[1970-Jan-13 22:15:35.032743]: Libstepper All Axis Abort
[1970-Jan-13 22:15:37.844030]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-13 22:15:37.845888]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-13 22:15:39.199419]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-13 22:15:41.928396]: GetCachedToolUsageStats called
[1970-Jan-13 22:15:44.062611]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-13 22:15:48.324826]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-13 22:15:52.657124]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-13 22:15:57.163240]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-13 22:16:01.301733]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-13 22:16:05.925380]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-13 22:16:10.087807]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-13 22:16:14.209543]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-13 22:16:18.576065]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-13 22:16:22.991313]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-13 22:16:26.454458]:  wait for axis 0 full: false offset: 90 l3map offset:    90 status: 1 position 2303 status count 1001
[1970-Jan-13 22:16:27.315490]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-13 22:16:31.525008]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-13 22:16:33.912621]: Raw HES proceeding
[1970-Jan-13 22:16:33.971698]: Got raw val 24009, saturated: true
[1970-Jan-13 22:16:34.090826]: Returning HES
[1970-Jan-13 22:16:34.092509]: Sending back val 24009, saturated true
[1970-Jan-13 22:16:34.405486]: GetCachedToolUsageStats called
[1970-Jan-13 22:16:34.457635]: Toolhead Abort
[1970-Jan-13 22:16:34.459366]: aborting pru with shutdown=true
[1970-Jan-13 22:16:34.463299]: CLEAR BUFFER FAIL! in libstepper::Abort()
[1970-Jan-13 22:16:34.465958]: Last sync period had (0,183,6421971) buffer fulls due to suspend moves
[1970-Jan-13 22:16:34.467730]: Libstepper All Axis Abort
[1970-Jan-13 22:18:31.760898]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-13 22:18:31.762672]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-13 22:19:33.610888]: GetCachedToolUsageStats called
[1970-Jan-13 22:19:33.829468]: GetCachedToolUsageStats called
[1970-Jan-13 22:19:39.955756]: GetCachedToolUsageStats called
[1970-Jan-13 22:19:40.432192]: Heater manager Set Target Temperature to 180, index 0
[1970-Jan-13 22:19:40.433974]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-13 22:19:41.754771]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false
[1970-Jan-13 22:19:41.756881]: Load Sense Limit Method: 1
[1970-Jan-13 22:19:41.764470]: Last sync period had (0,183,6423135) buffer fulls due to suspend moves
[1970-Jan-13 22:19:41.766249]: Libstepper All Axis Abort
[1970-Jan-13 22:19:43.068652]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-13 22:19:43.080727]: Toolhead Abort
[1970-Jan-13 22:19:43.082476]: aborting pru with shutdown=true
[1970-Jan-13 22:19:43.085228]: Last sync period had (0,183,6423147) buffer fulls due to suspend moves
[1970-Jan-13 22:19:43.087148]: Libstepper All Axis Abort
[1970-Jan-13 22:19:43.237317]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-13 22:19:45.526695]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false
[1970-Jan-13 22:19:45.528673]: Load Sense Limit Method: 0
[1970-Jan-13 22:19:45.531400]: Last sync period had (0,183,6423222) buffer fulls due to suspend moves
[1970-Jan-13 22:19:45.533269]: Libstepper All Axis Abort
[1970-Jan-13 22:19:46.713962]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-13 22:19:46.715784]: Toolhead Abort
[1970-Jan-13 22:19:46.717636]: aborting pru with shutdown=true
[1970-Jan-13 22:19:46.730841]: Last sync period had (0,183,6423246) buffer fulls due to suspend moves
[1970-Jan-13 22:19:46.732685]: Libstepper All Axis Abort
[1970-Jan-13 22:19:46.802982]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-13 22:19:47.838033]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-13 22:20:09.268559]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-13 22:20:23.231119]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false
[1970-Jan-13 22:20:25.099051]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-13 22:20:34.328839]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-13 22:20:41.885969]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-13 22:20:41.887766]: Toolhead Abort
[1970-Jan-13 22:20:41.889459]: aborting pru with shutdown=false
[1970-Jan-13 22:20:41.901493]: Last sync period had (0,183,6425328) buffer fulls due to suspend moves
[1970-Jan-13 22:20:41.903657]: Libstepper All Axis Abort
[1970-Jan-13 22:20:42.045162]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-13 22:20:42.240666]: HES logged: true
[1970-Jan-13 22:20:51.715648]: GAP: Query->Await
[1970-Jan-13 22:20:51.755654]: TH0: Retreived step position 11993359
[1970-Jan-13 22:20:51.790283]: wait for PRU status in get position
[1970-Jan-13 22:20:51.792162]: GAP: Await->Done(Query)
[1970-Jan-13 22:20:51.841818]: Changing HES sample rate. Commanded: 30Hz; clamped to 30.7143Hz (215/7)
[1970-Jan-13 22:20:52.027255]: Syncing turned true
[1970-Jan-13 22:20:52.482806]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-13 22:20:52.484604]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-13 22:20:52.557091]: Toolhead 0  ADC Error: 1
[1970-Jan-13 22:20:52.763593]: Toolhead 0 commands idle
[1970-Jan-13 22:20:52.794118]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-13 22:20:52.795802]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-13 22:20:52.797880]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-13 22:20:52.799622]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-13 22:20:52.801529]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-13 22:20:52.803338]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-13 22:20:52.806320]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-13 22:20:52.809099]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-13 22:20:52.811001]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-13 22:20:52.812664]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-13 22:20:52.814441]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-13 22:20:53.372283]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-13 22:20:59.933257]: Buffer stall ongoing: 14964
[1970-Jan-13 22:21:00.272326]: Buffer stall ongoing: 86559
[1970-Jan-13 22:21:00.345480]: Buffer stall ongoing: 102039
[1970-Jan-13 22:21:00.408961]: Last sync period had (0,0,228) buffer fulls due to suspend moves
[1970-Jan-13 22:21:00.421063]: Syncing turned false
[1970-Jan-13 22:21:01.297094]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-13 22:21:01.298802]: Buffer stall ongoing: 118035
[1970-Jan-13 22:21:01.418000]: Toolhead 0  ADC Error: 0
[1970-Jan-13 22:21:02.553426]: HES logged: true
[1970-Jan-13 22:21:03.286375]: GetCachedToolUsageStats called
[1970-Jan-13 22:21:07.592443]: GAP: Query->Await
[1970-Jan-13 22:21:07.629405]: TH0: Retreived step position 11731215
[1970-Jan-13 22:21:07.646802]: wait for PRU status in get position
[1970-Jan-13 22:21:07.648676]: GAP: Await->Done(Query)
[1970-Jan-13 22:21:09.187122]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-13 22:21:16.432471]: Changing HES sample rate. Commanded: 215Hz; clamped to 215Hz (215/1)
[1970-Jan-13 22:21:38.316931]: GetCachedToolUsageStats called
[1970-Jan-13 22:21:38.751593]: Expecting 1.5399e+06 steps extruded this print from 14186.1 mm of plastic
[1970-Jan-13 22:21:39.049164]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-13 22:21:39.061413]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-13 22:21:39.231747]: bronx lowest mem space: 0x34e bytes
[1970-Jan-13 22:21:39.469268]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-13 22:22:44.830457]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-13 22:22:46.105168]: Expend Buffer: false
[1970-Jan-13 22:22:46.208166]: Syncing turned true
[1970-Jan-13 22:22:46.248796]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-13 22:22:46.254750]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-13 22:22:46.730676]: Toolhead 0  ADC Error: 1
[1970-Jan-13 22:22:46.967994]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-13 22:22:46.969831]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-13 22:22:46.978952]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-13 22:22:46.990523]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-13 22:22:46.992241]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-13 22:22:46.993908]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-13 22:22:46.996193]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-13 22:22:46.997856]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-13 22:22:46.999540]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-13 22:22:47.028975]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-13 22:22:47.045716]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-13 22:22:48.176078]: Expected packet id: 0x75, Got packet id: 0x74, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0xf4,0x34,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4e,0x1,0x0,0x0,0x0,0x0,0x7,0xde,0x0,0x74,0xfb,0x88,0x1a,0x3c,

[1970-Jan-13 22:22:48.177965]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-13 22:22:48.542641]: Expected packet id: 0xb0, Got packet id: 0xaf, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0xf4,0xaa,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4e,0x1,0x0,0x0,0x0,0x0,0x0,0x3d,0x0,0xaf,0xc1,0xd4,0xb2,0xec,

[1970-Jan-13 22:22:48.544656]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-13 22:22:48.549571]: Expected packet id: 0xb0, Got packet id: 0xaf, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0xf4,0xaa,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4e,0x1,0x0,0x0,0x0,0x0,0x0,0x3d,0x0,0xaf,0xc1,0xd4,0xb2,0xec,

[1970-Jan-13 22:22:48.551778]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 2
[1970-Jan-13 22:22:57.854749]: Steps overrun! last 65532 and just got 16
[1970-Jan-13 22:22:57.856588]: calculated 19
[1970-Jan-13 22:24:37.867288]: Expected packet id: 0x28, Got packet id: 0x27, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0x75,0x84,0x1,0x0,0xd7,0x0,0x0,0xac,0x97,0x3,0x4e,0x1,0x0,0x0,0x0,0x0,0x0,0xf,0x0,0x27,0x22,0xa1,0x9b,0x89,

[1970-Jan-13 22:24:37.870455]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-13 22:25:47.661160]: Toolhead 0 state error: 80
[1970-Jan-13 22:25:49.274795]: GetCachedToolUsageStats called
[1970-Jan-13 22:25:49.327732]: toolhead pausing
[1970-Jan-13 22:25:49.333081]: Last sync period had (0,1338,7296) buffer fulls due to suspend moves
[1970-Jan-13 22:25:49.334856]: Syncing turned false
[1970-Jan-13 22:25:49.336812]: quack pause: true
[1970-Jan-13 22:25:49.377011]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-13 22:25:49.436916]:  axis running: 0
[1970-Jan-13 22:25:49.595931]:  axis running: 0
[1970-Jan-13 22:25:49.691780]:  axis running: 0
[1970-Jan-13 22:25:49.749172]:  axis running: 0
[1970-Jan-13 22:25:49.829183]:  axis running: 0
[1970-Jan-13 22:25:49.926980]:  axis running: 0
[1970-Jan-13 22:25:50.003366]:  axis running: 0
[1970-Jan-13 22:25:50.815685]: Last sync period had (0,1338,7296) buffer fulls due to suspend moves
[1970-Jan-13 22:25:50.818182]: Libstepper All Axis Abort
[1970-Jan-13 22:25:50.819948]: Clear Toolhead Buffer
[1970-Jan-13 22:25:51.015519]: clear toolhead buffer acknowledged
[1970-Jan-13 22:25:51.106699]: toolhead unpausing
[1970-Jan-13 22:25:51.108427]: quack pause: false
[1970-Jan-13 22:25:51.228207]: Expend Buffer: true
[1970-Jan-13 22:25:51.331067]: Last sync period had (0,1338,7320) buffer fulls due to suspend moves
[1970-Jan-13 22:25:51.332920]: Syncing turned false
[1970-Jan-13 22:25:51.499073]: GAP: Query->Await
[1970-Jan-13 22:25:51.578702]: GAP: Await
[1970-Jan-13 22:25:51.627262]: GAP: Await
[1970-Jan-13 22:25:51.703203]: GAP: Await
[1970-Jan-13 22:25:51.737401]: Toolhead 0  ADC Error: 0
[1970-Jan-13 22:25:51.758662]: GAP: Await
[1970-Jan-13 22:25:51.821352]: GAP: Await
[1970-Jan-13 22:25:51.899748]: TH0: Retreived step position 13959439
[1970-Jan-13 22:25:51.935868]: wait for PRU status in get position
[1970-Jan-13 22:25:51.937705]: wait for PRU status in get position
[1970-Jan-13 22:25:51.939319]: GAP: Await->Done(Query)
[1970-Jan-13 22:25:52.571903]: Suspend
[1970-Jan-13 22:25:52.590345]: Suspend index 400 found, A-pos 496.173
[1970-Jan-13 22:25:57.230569]: GAP: Query->Await
[1970-Jan-13 22:25:57.314624]: GAP: Await
[1970-Jan-13 22:25:57.341064]: TH0: Retreived step position 14090511
[1970-Jan-13 22:25:57.382268]: wait for PRU status in get position
[1970-Jan-13 22:25:57.384070]: wait for PRU status in get position
[1970-Jan-13 22:25:57.385714]: GAP: Await->Done(Query)
[1970-Jan-13 22:25:57.688258]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-13 22:25:57.690372]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-13 22:25:58.495422]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-13 22:25:59.241423]: GetCachedToolUsageStats called
[1970-Jan-13 22:26:04.557694]: Toolhead 0 state error: 0
[1970-Jan-13 22:29:04.381833]: Toolhead 0 state error: 56
[1970-Jan-13 22:29:05.888271]: Toolhead 0 state error: 0
[1970-Jan-14 12:39:18.607558]: TH0: 43 failures in last 65536 packets (0.0656128%)
[1970-Jan-17 18:17:39.703142]: Toolhead 0 state error: 80
[1970-Jan-17 18:17:52.415288]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-17 18:17:52.417185]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-17 18:17:52.919576]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-17 18:20:52.750714]: GetCachedToolUsageStats called
[1970-Jan-17 18:20:59.699782]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-17 18:21:09.299667]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-17 18:21:18.644487]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-17 18:21:28.414756]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-17 18:21:37.789352]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-17 18:23:57.876490]: Toolhead 0 state error: 56
[1970-Jan-17 18:23:58.716249]: Toolhead 0 state error: 80
[1970-Jan-17 18:31:22.156617]: GetCachedToolUsageStats called
[1970-Jan-17 18:31:23.652084]: toolhead pausing
[1970-Jan-17 18:31:23.657064]: Last sync period had (0,1338,3686964) buffer fulls due to suspend moves
[1970-Jan-17 18:31:23.658861]: Syncing turned false
[1970-Jan-17 18:31:23.660762]: quack pause: true
[1970-Jan-17 18:31:23.880348]: Last sync period had (0,1338,3686973) buffer fulls due to suspend moves
[1970-Jan-17 18:31:23.882146]: Libstepper All Axis Abort
[1970-Jan-17 18:31:23.883875]: Clear Toolhead Buffer
[1970-Jan-17 18:31:24.045213]: clear toolhead buffer acknowledged
[1970-Jan-17 18:31:24.092705]: toolhead unpausing
[1970-Jan-17 18:31:24.094537]: quack pause: false
[1970-Jan-17 18:31:24.178362]: Expend Buffer: true
[1970-Jan-17 18:31:24.223766]: Last sync period had (0,1338,3686994) buffer fulls due to suspend moves
[1970-Jan-17 18:31:24.227117]: Syncing turned false
[1970-Jan-17 18:31:24.331131]: GAP: Query->Await
[1970-Jan-17 18:31:24.753339]: GAP: Await
[1970-Jan-17 18:31:24.796413]: GAP: Await
[1970-Jan-17 18:31:25.198740]: GAP: Await
[1970-Jan-17 18:31:25.268601]: GAP: Await
[1970-Jan-17 18:31:25.289489]: TH0: Retreived step position 3866895
[1970-Jan-17 18:31:25.314492]: wait for PRU status in get position
[1970-Jan-17 18:31:25.316171]: wait for PRU status in get position
[1970-Jan-17 18:31:25.317794]: GAP: Await->Done(Query)
[1970-Jan-17 18:31:25.545139]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-17 18:31:25.546919]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-17 18:31:29.124341]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-17 18:31:32.887774]: Last sync period had (0,1338,3687357) buffer fulls due to suspend moves
[1970-Jan-17 18:31:32.889616]: Syncing turned false
[1970-Jan-17 18:31:32.891594]: Toolhead Abort
[1970-Jan-17 18:31:32.893454]: aborting pru with shutdown=true
[1970-Jan-17 18:31:32.896035]: Last sync period had (0,1338,3687357) buffer fulls due to suspend moves
[1970-Jan-17 18:31:32.898863]: Libstepper All Axis Abort
[1970-Jan-17 18:31:32.900727]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-17 18:31:32.902472]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-17 18:31:33.041758]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-17 18:31:33.043565]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-17 18:31:33.096911]: Commanding stats update: Retract count: 25147
[1970-Jan-17 18:31:33.098669]: Toolhead 0 marked as possibly blocking!
[1970-Jan-17 18:31:34.435670]: Toolhead 0 done blocking!
[1970-Jan-17 18:31:34.544157]: GetToolUsageStats called in machine  state 0
[1970-Jan-17 18:31:34.545892]: Commanding tool usage stat retrieve
[1970-Jan-17 18:31:34.547615]: GetToolUsageState: Proceeds to 1
[1970-Jan-17 18:31:34.549229]: GetToolUsagState: Error from retrieve: 0x10a
[1970-Jan-17 18:31:34.590355]: GetToolUsageStats called in machine  state 1
[1970-Jan-17 18:31:34.653869]: GetToolUsageStats called in machine  state 1
[1970-Jan-17 18:31:34.692612]: GetToolUsageStats called in machine  state 1
[1970-Jan-17 18:31:34.730449]: GetToolUsageStats called in machine  state 1
[1970-Jan-17 18:31:34.752496]: Raw usage stats: retract 50287ct, extrusion 864756 steps, 3530 seconds, refurbed 0 times
[1970-Jan-17 18:31:34.798076]: GetToolUsageStats called in machine  state 1
[1970-Jan-17 18:31:34.799956]: VerifyToolUsageStatsRetrieved: Done
[1970-Jan-17 18:31:34.801791]: GetToolUsageState: Proceeds to 2
[1970-Jan-17 18:31:34.829190]: GetToolUsageStats called in machine  state 2
[1970-Jan-17 18:31:34.831284]: GetToolUsageState: Done, resets
[1970-Jan-17 18:52:57.221626]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-17 18:52:57.223539]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)