[1970-Jan-01 00:01:29.084724]: Loading settings from string...
[1970-Jan-01 00:01:29.362036]: Parsing toolhead settings for bronx...
[1970-Jan-01 00:01:29.401360]: Rebuilding toolhead structure
[1970-Jan-01 00:01:29.441185]: Building bronx location 0...
[1970-Jan-01 00:01:29.608193]: Initialization: heater settings
[1970-Jan-01 00:01:29.620327]: storing heater 0 to time out after 3 minutes at temp, 1 minutes with no rise of 10C, fan feedforward amount 15C
[1970-Jan-01 00:01:29.640815]: Settings: Parsing home subtree...
[1970-Jan-01 00:01:29.665884]: Init endstop for axis: 0, type: load_sense, polarity: false
[1970-Jan-01 00:01:29.692222]: Init endstop for axis: 1, type: load_sense, polarity: false
[1970-Jan-01 00:01:29.694013]: Init endstop for axis: 2, type: toolhead, polarity: false
[1970-Jan-01 00:01:29.721433]: Parsing root settings...
[1970-Jan-01 00:01:29.781824]: STEPPER CONVERSIONS: Axis 0 steps per mm: 88.5732
[1970-Jan-01 00:01:29.809438]: STEPPER CONVERSIONS: Axis 1 steps per mm: 88.5732
[1970-Jan-01 00:01:29.821616]: STEPPER CONVERSIONS: Axis 2 steps per mm: 400
[1970-Jan-01 00:01:29.823425]: STEPPER CONVERSIONS: Axis 3 steps per mm: 108.55
[1970-Jan-01 00:01:29.825361]: STEPPER CONVERSIONS: Axis 0 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 238 29 0
[1970-Jan-01 00:01:29.827591]: STEPPER CONVERSIONS: Axis 1 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 32 29 0
[1970-Jan-01 00:01:29.829733]: STEPPER CONVERSIONS: Axis 2 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 32 32 0
[1970-Jan-01 00:01:29.842240]: STEPPER CONVERSIONS: Axis 3 periods per second 17847.6 seconds per period 5.603e-05 slowest tickrate axis 3 tickrate 5.603e-05 radices 32 32 32 31
[1970-Jan-01 00:01:29.844660]: syncing set to true
[1970-Jan-01 00:01:29.883030]: Axis count unspecified, defaulting to 4
[1970-Jan-01 00:01:29.921910]: Loading capacitor model settings for extruder 0
[1970-Jan-01 00:01:29.925208]: Have 1 valid ToolheadManager pointers, 0 is 0x1de2f8
[1970-Jan-01 00:01:30.040817]: setting driver address to 22
[1970-Jan-01 00:01:33.400813]: Init step: 0
[1970-Jan-01 00:01:33.448328]: Reset Toolhead Program State
[1970-Jan-01 00:01:33.460755]: Toolhead programmer: Resetting
[1970-Jan-01 00:01:33.462460]: done
[1970-Jan-01 00:01:34.578664]: Init step: 1
[1970-Jan-01 00:01:34.596183]: done
[1970-Jan-01 00:01:35.091200]: Init step: 2
[1970-Jan-01 00:01:35.093568]: done
[1970-Jan-01 00:01:35.583506]: Init step: 3
[1970-Jan-01 00:01:35.740874]: done
[1970-Jan-01 00:01:36.086772]: Init step: 4
[1970-Jan-01 00:01:36.107881]: done
[1970-Jan-01 00:01:36.586917]: Init step: 5
[1970-Jan-01 00:01:36.604862]: done
[1970-Jan-01 00:01:37.088378]: Init step: 5
[1970-Jan-01 00:01:37.200740]: done
[1970-Jan-01 00:01:37.610833]: Init step: 5
[1970-Jan-01 00:01:37.692463]: done
[1970-Jan-01 00:01:38.113407]: Init step: 5
[1970-Jan-01 00:01:38.115270]: done
[1970-Jan-01 00:01:38.616903]: Init step: 5
[1970-Jan-01 00:01:38.630465]: done
[1970-Jan-01 00:01:39.118900]: Init step: 5
[1970-Jan-01 00:01:39.231476]: done
[1970-Jan-01 00:01:39.632053]: Init step: 5
[1970-Jan-01 00:01:39.639515]: Toolhead 0: Packet 0x0: Calculated CRC: 0x62f5481b  Packet CRC: 0x0
[1970-Jan-01 00:01:39.641629]: Toolhead 0 : Toolhead Response Fail with comm_error: 1  Retry # : 1
[1970-Jan-01 00:01:39.643412]: done
[1970-Jan-01 00:01:40.145141]: Init step: 5
[1970-Jan-01 00:01:40.146895]: done
[1970-Jan-01 00:01:40.648222]: Init step: 5
[1970-Jan-01 00:01:40.663901]: done
[1970-Jan-01 00:01:41.156684]: Init step: 5
[1970-Jan-01 00:01:41.258760]: done
[1970-Jan-01 00:01:41.654688]: Init step: 5
[1970-Jan-01 00:01:41.670911]: Got valid API version 6 for Toolhead 0
[1970-Jan-01 00:01:41.677020]: done
[1970-Jan-01 00:01:42.155846]: Init step: 5
[1970-Jan-01 00:01:42.161625]: done
[1970-Jan-01 00:01:42.668604]: Init step: 5
[1970-Jan-01 00:01:42.780859]: done
[1970-Jan-01 00:01:43.171880]: Init step: 5
[1970-Jan-01 00:01:43.180915]: Toolhead 0 state error: 54
[1970-Jan-01 00:01:43.182601]: Toolhead 0: Toolhead has Firmware version 1.7,724
[1970-Jan-01 00:01:43.184617]:  Toolhead 0 initialized
[1970-Jan-01 00:01:43.186310]: done
[1970-Jan-01 00:01:43.683569]: Init step: 6
[1970-Jan-01 00:01:43.685251]: done
[1970-Jan-01 00:01:44.185775]: Init step: 7
[1970-Jan-01 00:01:44.188273]: done
[1970-Jan-01 00:01:44.703290]: PRU Event: PRU_INIT
[1970-Jan-01 00:01:45.700932]: bronx lowest mem space: 0x3b6 bytes
[1970-Jan-01 00:02:06.514140]: GetCachedToolUsageStats called
[1970-Jan-01 00:02:23.976405]: bronx lowest mem space: 0x3b2 bytes
[1970-Jan-01 00:05:28.582145]: bronx lowest mem space: 0x3ae bytes
[1970-Jan-01 00:35:15.574089]: bronx lowest mem space: 0x39e bytes
[1970-Jan-02 06:46:08.750305]: bronx lowest mem space: 0x376 bytes
[1970-Jan-02 06:46:08.752024]: Checking tool eeprom version
[1970-Jan-02 06:46:08.753640]: Commanding tool usage stat retrieve
[1970-Jan-02 06:46:08.755260]: New tool uid 0x220ca9 attached, updating info cache
[1970-Jan-02 06:46:08.860629]: GetCachedToolUsageStats called
[1970-Jan-02 06:46:10.257683]: Toolhead 0 state error: 80
[1970-Jan-02 06:46:10.259364]: Connected tool has eepromv4
[1970-Jan-02 06:46:11.782459]: Raw usage stats: retract 555783666ct, extrusion 106161445 steps, 692282 seconds, refurbed 0 times
[1970-Jan-02 06:46:11.784344]: Steps/mm not configured, tool usage logging will be wrong!
[1970-Jan-02 06:46:16.136526]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-02 06:46:16.138263]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-02 06:46:17.499225]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-02 06:46:18.307179]: bronx lowest mem space: 0x352 bytes
[1970-Jan-02 06:49:47.503503]: GetCachedToolUsageStats called
[1970-Jan-02 06:49:52.871746]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-02 06:49:56.526294]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-02 06:50:00.394241]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-02 06:50:04.332972]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-02 06:50:08.104691]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-02 06:50:08.180800]: Toolhead 0 state error: 0
[1970-Jan-02 06:50:11.679514]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-02 06:50:15.799678]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 06:50:19.274805]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 06:50:22.902157]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 06:50:26.944209]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 06:50:27.007974]:  wait for axis 0 full: false offset: 108 l3map offset:    126 status: 1 position 0 status count 1001
[1970-Jan-02 06:50:30.659033]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 06:50:34.226814]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 06:50:38.197117]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 06:50:41.837442]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 06:50:44.715102]: Raw HES proceeding
[1970-Jan-02 06:50:44.781928]: Got raw val 23952, saturated: true
[1970-Jan-02 06:50:44.910490]: Returning HES
[1970-Jan-02 06:50:44.912115]: Sending back val 23952, saturated true
[1970-Jan-02 06:50:45.258189]: GetCachedToolUsageStats called
[1970-Jan-02 06:50:45.285784]: TH0: 2 failures in last 55263 packets (0.00361906%)
[1970-Jan-02 06:50:45.287770]: Toolhead Abort
[1970-Jan-02 06:50:45.289434]: aborting pru with shutdown=true
[1970-Jan-02 06:50:45.292432]: Last sync period had (0,0,681990) buffer fulls due to suspend moves
[1970-Jan-02 06:50:45.294244]: Libstepper All Axis Abort
[1970-Jan-02 06:50:48.343538]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-02 06:50:48.345229]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-02 06:50:59.224615]: GetCachedToolUsageStats called
[1970-Jan-02 06:51:00.826304]: Heater manager Set Target Temperature to 180, index 0
[1970-Jan-02 06:51:00.828111]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-02 06:51:02.162109]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false
[1970-Jan-02 06:51:02.164085]: Load Sense Limit Method: 1
[1970-Jan-02 06:51:02.170903]: Last sync period had (0,0,682179) buffer fulls due to suspend moves
[1970-Jan-02 06:51:02.172774]: Libstepper All Axis Abort
[1970-Jan-02 06:51:02.828169]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-02 06:51:02.829979]: Toolhead Abort
[1970-Jan-02 06:51:02.840296]: aborting pru with shutdown=true
[1970-Jan-02 06:51:02.842932]: Last sync period had (0,0,682197) buffer fulls due to suspend moves
[1970-Jan-02 06:51:02.844805]: Libstepper All Axis Abort
[1970-Jan-02 06:51:02.878025]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-02 06:51:05.066925]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false
[1970-Jan-02 06:51:05.068892]: Load Sense Limit Method: 0
[1970-Jan-02 06:51:05.071973]: Last sync period had (0,0,682353) buffer fulls due to suspend moves
[1970-Jan-02 06:51:05.073903]: Libstepper All Axis Abort
[1970-Jan-02 06:51:05.815383]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-02 06:51:05.891000]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-02 06:51:05.892951]: Toolhead Abort
[1970-Jan-02 06:51:05.894660]: aborting pru with shutdown=true
[1970-Jan-02 06:51:05.897643]: CLEAR BUFFER FAIL! in libstepper::Abort()
[1970-Jan-02 06:51:05.910822]: Last sync period had (0,0,682389) buffer fulls due to suspend moves
[1970-Jan-02 06:51:05.912916]: Libstepper All Axis Abort
[1970-Jan-02 06:51:05.983949]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-02 06:51:06.502373]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-02 06:51:43.540881]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 06:51:50.500719]: libstepper: true toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 06:51:55.149172]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false
[1970-Jan-02 06:51:59.149482]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 06:52:03.278811]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 06:52:07.207540]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 06:52:11.504435]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 06:52:13.872664]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-02 06:52:13.874556]: Toolhead Abort
[1970-Jan-02 06:52:13.876228]: aborting pru with shutdown=false
[1970-Jan-02 06:52:13.879809]: Last sync period had (0,0,687789) buffer fulls due to suspend moves
[1970-Jan-02 06:52:13.881724]: Libstepper All Axis Abort
[1970-Jan-02 06:52:13.913463]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-02 06:52:14.053882]: HES logged: true
[1970-Jan-02 06:52:19.033749]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-02 06:52:23.234618]: GAP: Query->Await
[1970-Jan-02 06:52:23.248049]: TH0: Retreived step position 11403527
[1970-Jan-02 06:52:23.267918]: wait for PRU status in get position
[1970-Jan-02 06:52:23.269559]: wait for PRU status in get position
[1970-Jan-02 06:52:23.271421]: GAP: Await->Done(Query)
[1970-Jan-02 06:52:23.302222]: Changing HES sample rate. Commanded: 30Hz; clamped to 30.7143Hz (215/7)
[1970-Jan-02 06:52:23.390358]: Syncing turned true
[1970-Jan-02 06:52:23.404104]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-02 06:52:23.405839]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-02 06:52:23.450949]: Toolhead 0  ADC Error: 1
[1970-Jan-02 06:52:23.541912]: Toolhead 0 commands idle
[1970-Jan-02 06:52:23.556472]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-02 06:52:23.558141]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-02 06:52:23.559851]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-02 06:52:23.561710]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-02 06:52:23.563496]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-02 06:52:23.565403]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-02 06:52:23.567048]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-02 06:52:23.568680]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-02 06:52:23.570639]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-02 06:52:23.572287]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-02 06:52:23.581723]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-02 06:52:27.319895]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-02 06:52:30.785526]: Buffer stall ongoing: 25929
[1970-Jan-02 06:52:30.929801]: Buffer stall ongoing: 56373
[1970-Jan-02 06:52:30.968604]: Last sync period had (0,0,615) buffer fulls due to suspend moves
[1970-Jan-02 06:52:30.970636]: Syncing turned false
[1970-Jan-02 06:52:30.986248]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-02 06:52:30.987944]: Buffer stall ongoing: 65016
[1970-Jan-02 06:52:31.021378]: Toolhead 0  ADC Error: 0
[1970-Jan-02 06:52:31.512853]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 06:52:32.094473]: HES logged: true
[1970-Jan-02 06:52:32.382936]: GetCachedToolUsageStats called
[1970-Jan-02 06:52:35.408439]: GAP: Query->Await
[1970-Jan-02 06:52:35.429986]: TH0: Retreived step position 11665671
[1970-Jan-02 06:52:35.448867]: wait for PRU status in get position
[1970-Jan-02 06:52:35.450737]: wait for PRU status in get position
[1970-Jan-02 06:52:35.453636]: GAP: Await->Done(Query)
[1970-Jan-02 06:52:36.266453]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 06:52:40.048004]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 06:52:40.328181]: Changing HES sample rate. Commanded: 215Hz; clamped to 215Hz (215/1)
[1970-Jan-02 06:52:40.835364]: GetCachedToolUsageStats called
[1970-Jan-02 06:52:40.962922]: Expecting 98616.7 steps extruded this print from 908.491 mm of plastic
[1970-Jan-02 06:52:41.221577]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-02 06:52:41.223364]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-02 06:52:41.563766]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-02 06:54:04.959365]: Expend Buffer: false
[1970-Jan-02 06:54:05.053925]: Syncing turned true
[1970-Jan-02 06:54:05.140970]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-02 06:54:05.142641]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-02 06:54:05.573339]: Toolhead 0  ADC Error: 1
[1970-Jan-02 06:54:05.789588]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-02 06:54:05.791558]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-02 06:54:05.793214]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-02 06:54:05.794855]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-02 06:54:05.796493]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-02 06:54:05.798258]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-02 06:54:05.799959]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-02 06:54:05.801909]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-02 06:54:05.803559]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-02 06:54:05.805336]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-02 06:54:05.806988]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-02 06:54:06.115627]: Expected packet id: 0xa9, Got packet id: 0xa8, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0x7,0x89,0xcf,0x1,0x0,0xd7,0x0,0x22,0xc,0xa9,0x3,0x52,0x1,0x0,0x0,0x0,0x0,0x0,0x45,0x0,0xa8,0x85,0xa1,0xd0,0xa1,

[1970-Jan-02 06:54:06.117623]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-02 06:54:07.141392]: Expected packet id: 0x24, Got packet id: 0x23, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0x7,0x89,0xcf,0x1,0x0,0xd7,0x0,0x22,0xc,0xa9,0x3,0x52,0x1,0x0,0x0,0x0,0x0,0x0,0x98,0x0,0x23,0xe1,0xe9,0xc6,0xbe,

[1970-Jan-02 06:54:07.143601]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-02 06:54:07.216457]: Expected packet id: 0x33, Got packet id: 0x22, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0x7,0x89,0xcf,0x1,0x0,0xd7,0x0,0x22,0xc,0xa9,0x3,0x52,

[1970-Jan-02 06:54:07.218312]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-02 06:54:07.261519]: Expected packet id: 0x3e, Got packet id: 0x3d, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0x7,0x89,0xcf,0x1,0x0,0xd7,0x0,0x22,0xc,0xa9,0x3,0x52,0x1,0x0,0x0,0x0,0x0,0x2,0xb7,0x0,0x3d,0x82,0xfe,0x32,0x8b,

[1970-Jan-02 06:54:07.263506]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-02 06:54:07.398292]: Expected packet id: 0x4a, Got packet id: 0x49, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0x7,0x8a,0x41,0x1,0x0,0xd7,0x0,0x22,0xc,0xa9,0x3,0x52,0x1,0x0,0x0,0x0,0x0,0x7,0x35,0x0,0x49,0xa1,0x3c,0x3b,0x7e,

[1970-Jan-02 06:54:07.400319]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-02 06:56:27.615454]: Steps overrun! last 65521 and just got 1
[1970-Jan-02 06:56:27.617146]: calculated 15
[1970-Jan-02 06:58:47.167035]: Expected packet id: 0xe5, Got packet id: 0xd7, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0x7,0x3e,0xbe,0x1,0x0,0xd7,0x0,0x22,0xc,0xa9,

[1970-Jan-02 06:58:47.168898]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-02 06:59:10.426409]: Expected packet id: 0x1, Got packet id: 0x0, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0x7,0x48,0x1d,0x1,0x0,0xd7,0x0,0x22,0xc,0xa9,0x3,0x52,0x1,0x1,0x0,0x0,0x0,0x1,0x49,0x0,0x0,0x30,0x52,0x5d,0xcf,

[1970-Jan-02 06:59:10.428397]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-02 06:59:24.289100]: Expected packet id: 0x25, Got packet id: 0x24, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0x7,0x4d,0xdd,0x1,0x0,0xd7,0x0,0x22,0xc,0xa9,0x3,0x52,0x1,0x1,0x0,0x0,0x0,0x0,0x34,0x0,0x24,0x62,0xb2,0xf8,0x22,

[1970-Jan-02 06:59:24.291307]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-02 07:01:12.346104]: Expected packet id: 0xb1, Got packet id: 0xb0, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0x7,0x76,0xba,0x1,0x0,0xd7,0x0,0x22,0xc,0xa9,0x3,0x52,0x1,0x1,0x0,0x0,0x0,0x2,0xbb,0x0,0xb0,0x4a,0xaf,0x73,0x55,

[1970-Jan-02 07:01:12.348230]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-02 07:01:12.353343]: Expected packet id: 0xb1, Got packet id: 0xb0, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0x7,0x76,0xba,0x1,0x0,0xd7,0x0,0x22,0xc,0xa9,0x3,0x52,0x1,0x1,0x0,0x0,0x0,0x2,0xbb,0x0,0xb0,0x4a,0xaf,0x73,0x55,

[1970-Jan-02 07:01:12.355179]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 2
[1970-Jan-02 07:01:14.911814]: Expected packet id: 0x12, Got packet id: 0x11, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0x7,0x77,0xaa,0x1,0x0,0xd7,0x0,0x22,0xc,0xa9,0x3,0x52,0x1,0x1,0x0,0x0,0x0,0x0,0x5d,0x0,0x11,0x1,0x4e,0x6e,0x2a,

[1970-Jan-02 07:01:14.913848]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-02 07:01:36.637736]: Toolhead 0 : Retry: Waited 0.62737s from state change
[1970-Jan-02 07:01:45.334256]: Expected packet id: 0xa8, Got packet id: 0xa7, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0x7,0x84,0x59,0x1,0x0,0xd7,0x0,0x22,0xc,0xa9,0x3,0x52,0x1,0x0,0x0,0x0,0x0,0x2,0xfc,0x0,0xa7,0x4c,0x35,0xc4,0x14,

[1970-Jan-02 07:01:45.336131]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-02 07:02:18.112209]: Expected packet id: 0x89, Got packet id: 0x88, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0x7,0x91,0xf5,0x1,0x0,0xd7,0x0,0x22,0xc,0xa9,0x3,0x52,0x1,0x0,0x0,0x0,0x0,0x3,0xdb,0x0,0x88,0xf5,0x4a,0xb,0x54,

[1970-Jan-02 07:02:18.114094]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-02 07:04:39.757137]: Expected packet id: 0xa5, Got packet id: 0xa4, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0x7,0xc8,0x86,0x1,0x0,0xd7,0x0,0x22,0xc,0xa9,0x3,0x52,0x1,0x1,0x0,0x0,0x0,0x0,0x68,0x0,0xa4,0xb3,0xfc,0xa3,0x2,

[1970-Jan-02 07:04:39.759035]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-02 07:05:33.037919]: Expected packet id: 0x60, Got packet id: 0x5f, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0x7,0xe2,0xc,0x1,0x0,0xd7,0x0,0x22,0xc,0xa9,0x3,0x52,0x1,0x1,0x0,0x0,0x0,0x3,0x3c,0x0,0x5f,0xd1,0xd,0x78,0xd1,

[1970-Jan-02 07:05:33.040390]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-02 07:05:33.045259]: Expected packet id: 0x60, Got packet id: 0x5f, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0x7,0xe2,0xc,0x1,0x0,0xd7,0x0,0x22,0xc,0xa9,0x3,0x52,0x1,0x1,0x0,0x0,0x0,0x3,0x3c,0x0,0x5f,0xd1,0xd,0x78,0xd1,

[1970-Jan-02 07:05:33.047544]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 2
[1970-Jan-02 07:06:19.275369]: Expend Buffer: true
[1970-Jan-02 07:06:19.506382]: Toolhead 0 commands idle
[1970-Jan-02 07:06:23.894973]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-02 07:06:29.319141]: Buffer stall ongoing: 9159
[1970-Jan-02 07:06:29.422172]: Buffer stall ongoing: 30960
[1970-Jan-02 07:06:29.458987]: Buffer stall ongoing: 38571
[1970-Jan-02 07:06:29.525256]: Buffer stall ongoing: 52632
[1970-Jan-02 07:06:29.627797]: Buffer stall ongoing: 74304
[1970-Jan-02 07:06:29.729723]: Buffer stall ongoing: 95847
[1970-Jan-02 07:06:29.839909]: Buffer stall ongoing: 118938
[1970-Jan-02 07:06:29.933663]: Buffer stall ongoing: 139191
[1970-Jan-02 07:06:29.952980]: Last sync period had (0,13839,83478) buffer fulls due to suspend moves
[1970-Jan-02 07:06:29.954774]: Syncing turned false
[1970-Jan-02 07:06:29.978901]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-02 07:06:29.980838]: Buffer stall ongoing: 143706
[1970-Jan-02 07:06:31.782644]: Toolhead 0  ADC Error: 0
[1970-Jan-02 07:06:34.120635]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 07:06:39.486607]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-02 07:06:42.384271]: Last sync period had (0,13839,84147) buffer fulls due to suspend moves
[1970-Jan-02 07:06:42.386197]: Syncing turned false
[1970-Jan-02 07:06:42.387910]: TH0: 148 failures in last 31655 packets (0.467541%)
[1970-Jan-02 07:06:42.389792]: Toolhead Abort
[1970-Jan-02 07:06:42.402418]: aborting pru with shutdown=true
[1970-Jan-02 07:06:42.405215]: Last sync period had (0,13839,84147) buffer fulls due to suspend moves
[1970-Jan-02 07:06:42.406938]: Libstepper All Axis Abort
[1970-Jan-02 07:06:42.408515]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-02 07:06:42.419284]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-02 07:06:42.512862]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-02 07:06:42.514741]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-02 07:06:42.609259]: Commanding stats update: Retract count: 555783780
[1970-Jan-02 07:06:42.617544]: Toolhead 0 marked as possibly blocking!
[1970-Jan-02 07:06:43.201254]: Toolhead 0 done blocking!
[1970-Jan-02 07:06:43.317808]: GetToolUsageStats called in machine  state 0
[1970-Jan-02 07:06:43.319510]: Commanding tool usage stat retrieve
[1970-Jan-02 07:06:43.330820]: GetToolUsageState: Proceeds to 1
[1970-Jan-02 07:06:43.332554]: GetToolUsagState: Error from retrieve: 0x10a
[1970-Jan-02 07:06:43.362661]: Raw usage stats: retract 1111567446ct, extrusion 106301472 steps, 693033 seconds, refurbed 0 times
[1970-Jan-02 07:06:43.437068]: GetToolUsageStats called in machine  state 1
[1970-Jan-02 07:06:43.438780]: VerifyToolUsageStatsRetrieved: Done
[1970-Jan-02 07:06:43.440562]: GetToolUsageState: Proceeds to 2
[1970-Jan-02 07:06:43.485455]: GetToolUsageStats called in machine  state 2
[1970-Jan-02 07:06:43.487155]: GetToolUsageState: Done, resets
[1970-Jan-02 07:06:44.028353]: GetCachedToolUsageStats called
[1970-Jan-02 07:26:03.534241]: GetCachedToolUsageStats called