[1970-Jan-01 00:01:28.790468]: Loading settings from string...
[1970-Jan-01 00:01:29.076004]: Parsing toolhead settings for bronx...
[1970-Jan-01 00:01:29.115600]: Rebuilding toolhead structure
[1970-Jan-01 00:01:29.154866]: Building bronx location 0...
[1970-Jan-01 00:01:29.316034]: Initialization: heater settings
[1970-Jan-01 00:01:29.317928]: storing heater 0 to time out after 3 minutes at temp, 1 minutes with no rise of 10C, fan feedforward amount 15C
[1970-Jan-01 00:01:29.337958]: Settings: Parsing home subtree...
[1970-Jan-01 00:01:29.373467]: Init endstop for axis: 0, type: load_sense, polarity: false
[1970-Jan-01 00:01:29.393373]: Init endstop for axis: 1, type: load_sense, polarity: false
[1970-Jan-01 00:01:29.395195]: Init endstop for axis: 2, type: toolhead, polarity: false
[1970-Jan-01 00:01:29.430938]: Parsing root settings...
[1970-Jan-01 00:01:29.479133]: STEPPER CONVERSIONS: Axis 0 steps per mm: 88.5732
[1970-Jan-01 00:01:29.517184]: STEPPER CONVERSIONS: Axis 1 steps per mm: 88.5732
[1970-Jan-01 00:01:29.519029]: STEPPER CONVERSIONS: Axis 2 steps per mm: 400
[1970-Jan-01 00:01:29.531189]: STEPPER CONVERSIONS: Axis 3 steps per mm: 108.55
[1970-Jan-01 00:01:29.533154]: STEPPER CONVERSIONS: Axis 0 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 238 29 0
[1970-Jan-01 00:01:29.535429]: STEPPER CONVERSIONS: Axis 1 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 32 29 0
[1970-Jan-01 00:01:29.537594]: STEPPER CONVERSIONS: Axis 2 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 32 32 0
[1970-Jan-01 00:01:29.539749]: STEPPER CONVERSIONS: Axis 3 periods per second 17847.6 seconds per period 5.603e-05 slowest tickrate axis 3 tickrate 5.603e-05 radices 32 32 32 31
[1970-Jan-01 00:01:29.552527]: syncing set to true
[1970-Jan-01 00:01:29.592303]: Axis count unspecified, defaulting to 4
[1970-Jan-01 00:01:29.631558]: Loading capacitor model settings for extruder 0
[1970-Jan-01 00:01:29.634974]: Have 1 valid ToolheadManager pointers, 0 is 0x1de2e8
[1970-Jan-01 00:01:29.747765]: setting driver address to 22
[1970-Jan-01 00:01:33.003969]: Init step: 0
[1970-Jan-01 00:01:33.070976]: Reset Toolhead Program State
[1970-Jan-01 00:01:33.072648]: Toolhead programmer: Resetting
[1970-Jan-01 00:01:33.074297]: done
[1970-Jan-01 00:01:34.237513]: Init step: 1
[1970-Jan-01 00:01:34.254732]: done
[1970-Jan-01 00:01:34.739621]: Init step: 2
[1970-Jan-01 00:01:34.751640]: done
[1970-Jan-01 00:01:35.242425]: Init step: 3
[1970-Jan-01 00:01:35.385180]: done
[1970-Jan-01 00:01:35.743865]: Init step: 4
[1970-Jan-01 00:01:35.764855]: done
[1970-Jan-01 00:01:36.246109]: Init step: 5
[1970-Jan-01 00:01:36.261159]: done
[1970-Jan-01 00:01:36.747992]: Init step: 5
[1970-Jan-01 00:01:36.850223]: done
[1970-Jan-01 00:01:37.260463]: Init step: 5
[1970-Jan-01 00:01:37.341229]: done
[1970-Jan-01 00:01:37.752072]: Init step: 5
[1970-Jan-01 00:01:37.754884]: done
[1970-Jan-01 00:01:38.253963]: Init step: 5
[1970-Jan-01 00:01:38.260475]: done
[1970-Jan-01 00:01:38.763539]: Init step: 5
[1970-Jan-01 00:01:38.865552]: done
[1970-Jan-01 00:01:39.265927]: Init step: 5
[1970-Jan-01 00:01:39.278095]: Toolhead 0: Packet 0x0: Calculated CRC: 0x62f5481b  Packet CRC: 0x0
[1970-Jan-01 00:01:39.280354]: Toolhead 0 : Toolhead Response Fail with comm_error: 1  Retry # : 1
[1970-Jan-01 00:01:39.282038]: done
[1970-Jan-01 00:01:39.779144]: Init step: 5
[1970-Jan-01 00:01:39.791507]: done
[1970-Jan-01 00:01:40.283992]: Init step: 5
[1970-Jan-01 00:01:40.290469]: done
[1970-Jan-01 00:01:40.783539]: Init step: 5
[1970-Jan-01 00:01:40.885591]: done
[1970-Jan-01 00:01:41.285227]: Init step: 5
[1970-Jan-01 00:01:41.295833]: Got valid API version 6 for Toolhead 0
[1970-Jan-01 00:01:41.312077]: done
[1970-Jan-01 00:01:41.788602]: Init step: 5
[1970-Jan-01 00:01:41.798666]: done
[1970-Jan-01 00:01:42.289697]: Init step: 5
[1970-Jan-01 00:01:42.402336]: done
[1970-Jan-01 00:01:42.794152]: Init step: 5
[1970-Jan-01 00:01:42.804366]: Toolhead 0 state error: 54
[1970-Jan-01 00:01:42.806186]: Toolhead 0: Toolhead has Firmware version 1.7,724
[1970-Jan-01 00:01:42.808055]:  Toolhead 0 initialized
[1970-Jan-01 00:01:42.809727]: done
[1970-Jan-01 00:01:43.295397]: Init step: 6
[1970-Jan-01 00:01:43.297240]: done
[1970-Jan-01 00:01:43.807590]: Init step: 7
[1970-Jan-01 00:01:43.821324]: done
[1970-Jan-01 00:01:44.324558]: PRU Event: PRU_INIT
[1970-Jan-01 00:01:45.318651]: bronx lowest mem space: 0x3b6 bytes
[1970-Jan-01 00:02:06.193645]: GetCachedToolUsageStats called
[1970-Jan-01 00:05:31.699199]: bronx lowest mem space: 0x3ae bytes
[1970-Jan-01 00:33:05.442527]: TH0: 2 failures in last 935 packets (0.213904%)
[1970-Jan-01 00:33:05.444594]: Toolhead Abort
[1970-Jan-01 00:33:05.446245]: aborting pru with shutdown=true
[1970-Jan-01 00:33:05.448780]: Last sync period had (0,0,11205) buffer fulls due to suspend moves
[1970-Jan-01 00:33:05.450817]: Libstepper All Axis Abort
[1970-Jan-01 00:33:16.626281]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 00:33:16.628021]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 00:33:19.521897]: Expected packet id: 0xb8, Got packet id: 0x0, Full packet: 
0xaa,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,

[1970-Jan-01 00:33:19.531537]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 00:33:19.899853]: Toolhead 0 state error: 11
[1970-Jan-01 00:33:19.901863]: Steps overrun! last 2171 and just got 0
[1970-Jan-01 00:33:19.903512]: calculated 63364
[1970-Jan-01 00:33:20.025245]: Toolhead 0 state error: 54
[1970-Jan-01 00:33:20.026945]: bronx lowest mem space: 0x396 bytes
[1970-Jan-01 00:33:20.166029]: Toolhead 0 state error: 80
[1970-Jan-01 00:33:20.167719]: bronx lowest mem space: 0x392 bytes
[1970-Jan-01 00:33:20.169377]: Checking tool eeprom version
[1970-Jan-01 00:33:20.171351]: Commanding tool usage stat retrieve
[1970-Jan-01 00:33:20.172983]: New tool uid 0x220ca9 attached, updating info cache
[1970-Jan-01 00:33:20.292430]: GetCachedToolUsageStats called
[1970-Jan-01 00:33:20.324842]: Last sync period had (0,0,11397) buffer fulls due to suspend moves
[1970-Jan-01 00:33:20.326622]: Syncing turned false
[1970-Jan-01 00:33:20.328326]: TH0: 2 failures in last 16 packets (12.5%)
[1970-Jan-01 00:33:20.330424]: Toolhead Abort
[1970-Jan-01 00:33:20.332228]: aborting pru with shutdown=true
[1970-Jan-01 00:33:20.335262]: Last sync period had (0,0,11397) buffer fulls due to suspend moves
[1970-Jan-01 00:33:20.337039]: Libstepper All Axis Abort
[1970-Jan-01 00:33:20.338617]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 00:33:20.340710]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 00:33:20.342681]: Commanding tool usage stat retrieve
[1970-Jan-01 00:33:20.391006]: Commanding tool usage stat retrieve
[1970-Jan-01 00:33:20.436840]: bronx lowest mem space: 0x386 bytes
[1970-Jan-01 00:33:20.452760]: Commanding tool usage stat retrieve
[1970-Jan-01 00:33:23.429910]: Raw usage stats: retract 277891833ct, extrusion 106092841 steps, 692129 seconds, refurbed 0 times
[1970-Jan-01 00:33:23.431880]: Steps/mm not configured, tool usage logging will be wrong!
[1970-Jan-01 00:33:24.938347]: Raw usage stats: retract 277891833ct, extrusion 106092841 steps, 692129 seconds, refurbed 0 times
[1970-Jan-01 00:33:24.940411]: Steps/mm not configured, tool usage logging will be wrong!
[1970-Jan-01 00:33:26.448298]: Raw usage stats: retract 277891833ct, extrusion 106092841 steps, 692129 seconds, refurbed 0 times
[1970-Jan-01 00:33:26.450234]: Steps/mm not configured, tool usage logging will be wrong!
[1970-Jan-01 00:33:28.457708]: bronx lowest mem space: 0x376 bytes
[1970-Jan-01 00:33:44.451699]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 00:33:44.453505]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 00:33:45.654343]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 00:33:46.122984]: bronx lowest mem space: 0x352 bytes
[1970-Jan-01 00:36:55.217429]: GetCachedToolUsageStats called
[1970-Jan-01 00:36:58.729526]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:37:02.234245]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:37:05.858839]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:37:09.808449]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:37:13.395724]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:37:16.862982]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:37:20.942691]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:37:24.526906]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:37:28.237406]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:37:32.091790]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:37:32.217612]:  wait for axis 0 full: false offset: 72 l3map offset:    90 status: 1 position 0 status count 1001
[1970-Jan-01 00:37:35.835674]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:37:39.342992]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:37:43.184938]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:37:46.849121]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:37:50.552605]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:37:54.512015]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:37:58.046261]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:38:01.628588]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:38:05.699282]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:38:09.316983]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:38:09.485461]:  wait for axis 0 full: false offset: 90 l3map offset:    90 status: 1 position 0 status count 1001
[1970-Jan-01 00:38:13.150568]: Raw HES proceeding
[1970-Jan-01 00:38:13.203188]: HES not updated!
[1970-Jan-01 00:38:13.265117]: HES not updated!
[1970-Jan-01 00:38:13.324039]: HES not updated!
[1970-Jan-01 00:38:13.350996]: Got raw val 23982, saturated: true
[1970-Jan-01 00:38:13.376170]: Returning HES
[1970-Jan-01 00:38:13.377823]: Sending back val 23982, saturated true
[1970-Jan-01 00:38:13.536508]: GetCachedToolUsageStats called
[1970-Jan-01 00:38:13.583140]: Toolhead Abort
[1970-Jan-01 00:38:13.584879]: aborting pru with shutdown=true
[1970-Jan-01 00:38:13.587605]: Last sync period had (0,0,34806) buffer fulls due to suspend moves
[1970-Jan-01 00:38:13.589327]: Libstepper All Axis Abort
[1970-Jan-01 00:38:37.655079]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 00:38:37.656966]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 00:38:38.877736]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 00:38:39.206956]: GetCachedToolUsageStats called
[1970-Jan-01 00:38:41.901720]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:38:45.832841]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:38:49.520985]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:38:53.278381]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:38:57.065217]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:39:00.629953]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:39:01.040226]: Toolhead 0 state error: 0
[1970-Jan-01 00:39:04.342699]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:39:08.095563]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:39:11.565953]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:39:15.209946]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:39:17.542188]:  wait for axis 0 full: false offset: 72 l3map offset:    90 status: 1 position 0 status count 1001
[1970-Jan-01 00:39:19.092425]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:39:22.707362]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:39:26.237458]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:39:29.970714]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:39:33.750857]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:39:37.320902]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:39:41.135721]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:39:44.620716]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:39:48.251640]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:39:52.235568]: Raw HES proceeding
[1970-Jan-01 00:39:52.273032]: Got raw val 23970, saturated: true
[1970-Jan-01 00:39:52.388265]: Returning HES
[1970-Jan-01 00:39:52.389901]: Sending back val 23970, saturated true
[1970-Jan-01 00:39:52.659198]: GetCachedToolUsageStats called
[1970-Jan-01 00:39:52.711316]: Toolhead Abort
[1970-Jan-01 00:39:52.713041]: aborting pru with shutdown=true
[1970-Jan-01 00:39:52.720870]: Last sync period had (0,0,41100) buffer fulls due to suspend moves
[1970-Jan-01 00:39:52.722605]: Libstepper All Axis Abort
[1970-Jan-01 00:39:55.882079]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 00:39:55.883987]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 00:41:06.707485]: GetCachedToolUsageStats called
[1970-Jan-01 00:41:29.268364]: Heater manager Set Target Temperature to 180, index 0
[1970-Jan-01 00:41:29.278184]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 00:41:30.107629]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false
[1970-Jan-01 00:41:30.109721]: Load Sense Limit Method: 1
[1970-Jan-01 00:41:30.122837]: Last sync period had (0,0,42225) buffer fulls due to suspend moves
[1970-Jan-01 00:41:30.124626]: Libstepper All Axis Abort
[1970-Jan-01 00:41:30.809954]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 00:41:30.811948]: Toolhead Abort
[1970-Jan-01 00:41:30.813780]: aborting pru with shutdown=true
[1970-Jan-01 00:41:30.816363]: Last sync period had (0,0,42252) buffer fulls due to suspend moves
[1970-Jan-01 00:41:30.818158]: Libstepper All Axis Abort
[1970-Jan-01 00:41:30.916236]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 00:41:32.709448]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:41:32.792915]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false
[1970-Jan-01 00:41:32.794940]: Load Sense Limit Method: 0
[1970-Jan-01 00:41:32.800853]: Last sync period had (0,0,42375) buffer fulls due to suspend moves
[1970-Jan-01 00:41:32.802599]: Libstepper All Axis Abort
[1970-Jan-01 00:41:33.608421]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 00:41:33.643146]: Toolhead Abort
[1970-Jan-01 00:41:33.644885]: aborting pru with shutdown=true
[1970-Jan-01 00:41:33.662272]: Last sync period had (0,0,42402) buffer fulls due to suspend moves
[1970-Jan-01 00:41:33.664030]: Libstepper All Axis Abort
[1970-Jan-01 00:41:33.795314]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 00:41:34.489358]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 00:42:23.269848]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:42:29.933318]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:42:35.440624]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false
[1970-Jan-01 00:42:38.205597]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:42:42.266426]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:42:46.063920]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:42:49.993566]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:42:54.169037]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-01 00:42:54.173293]: Toolhead Abort
[1970-Jan-01 00:42:54.174997]: aborting pru with shutdown=false
[1970-Jan-01 00:42:54.177501]: Last sync period had (0,0,49038) buffer fulls due to suspend moves
[1970-Jan-01 00:42:54.179616]: Libstepper All Axis Abort
[1970-Jan-01 00:42:54.211014]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-01 00:42:54.344200]: HES logged: true
[1970-Jan-01 00:42:54.547977]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:43:03.485887]: GAP: Query->Await
[1970-Jan-01 00:43:03.624547]: TH0: Retreived step position 11862279
[1970-Jan-01 00:43:03.651735]: wait for PRU status in get position
[1970-Jan-01 00:43:03.653353]: wait for PRU status in get position
[1970-Jan-01 00:43:03.655407]: GAP: Await->Done(Query)
[1970-Jan-01 00:43:03.709658]: Changing HES sample rate. Commanded: 30Hz; clamped to 30.7143Hz (215/7)
[1970-Jan-01 00:43:03.865836]: Syncing turned true
[1970-Jan-01 00:43:03.901956]: PRU Event: PRU_SYNC_ON(12)
[1970-Jan-01 00:43:03.903645]: PRU Event: PRU_SYNC_DELAY(11)
[1970-Jan-01 00:43:03.935580]: Toolhead 0  ADC Error: 1
[1970-Jan-01 00:43:03.990640]: Toolhead 0 commands idle
[1970-Jan-01 00:43:04.008040]: PRU Event: PRU_SYNC_DELAY(10)
[1970-Jan-01 00:43:04.009846]: PRU Event: PRU_SYNC_DELAY(9)
[1970-Jan-01 00:43:04.011779]: PRU Event: PRU_SYNC_DELAY(8)
[1970-Jan-01 00:43:04.013504]: PRU Event: PRU_SYNC_DELAY(7)
[1970-Jan-01 00:43:04.016251]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 00:43:04.017890]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 00:43:04.019536]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 00:43:04.037702]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 00:43:04.039386]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 00:43:04.041271]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 00:43:04.043076]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 00:43:06.154561]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:43:09.766351]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:43:11.237872]: Buffer stall ongoing: 27090
[1970-Jan-01 00:43:11.256107]: Last sync period had (0,0,612) buffer fulls due to suspend moves
[1970-Jan-01 00:43:11.257914]: Syncing turned false
[1970-Jan-01 00:43:11.272067]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 00:43:11.273940]: Buffer stall ongoing: 31218
[1970-Jan-01 00:43:11.322700]: Toolhead 0  ADC Error: 0
[1970-Jan-01 00:43:12.328327]: HES logged: true
[1970-Jan-01 00:43:12.600211]: GetCachedToolUsageStats called
[1970-Jan-01 00:43:14.044676]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:43:15.651137]: GAP: Query->Await
[1970-Jan-01 00:43:15.667865]: TH0: Retreived step position 11665671
[1970-Jan-01 00:43:15.684954]: wait for PRU status in get position
[1970-Jan-01 00:43:15.686642]: wait for PRU status in get position
[1970-Jan-01 00:43:15.688221]: GAP: Await->Done(Query)
[1970-Jan-01 00:43:18.229795]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:43:20.553737]: Changing HES sample rate. Commanded: 215Hz; clamped to 215Hz (215/1)
[1970-Jan-01 00:48:23.028024]: GetCachedToolUsageStats called
[1970-Jan-01 00:48:27.240456]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:48:32.271079]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:48:32.694360]: Last sync period had (0,0,33924) buffer fulls due to suspend moves
[1970-Jan-01 00:48:32.696318]: Syncing turned false
[1970-Jan-01 00:48:32.698065]: Toolhead Abort
[1970-Jan-01 00:48:32.699779]: aborting pru with shutdown=true
[1970-Jan-01 00:48:32.702574]: Last sync period had (0,0,33924) buffer fulls due to suspend moves
[1970-Jan-01 00:48:32.704472]: Libstepper All Axis Abort
[1970-Jan-01 00:48:32.710836]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 00:48:32.712598]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 00:48:32.812696]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 00:48:32.814476]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 00:48:32.885131]: Commanding stats update: Retract count: 277891833
[1970-Jan-01 00:48:32.886878]: Toolhead 0 marked as possibly blocking!
[1970-Jan-01 00:48:33.475317]: Toolhead 0 done blocking!
[1970-Jan-01 00:48:33.605346]: GetToolUsageStats called in machine  state 0
[1970-Jan-01 00:48:33.607238]: Commanding tool usage stat retrieve
[1970-Jan-01 00:48:33.608894]: GetToolUsageState: Proceeds to 1
[1970-Jan-01 00:48:33.611631]: GetToolUsagState: Error from retrieve: 0x10a
[1970-Jan-01 00:48:33.634987]: Raw usage stats: retract 555783666ct, extrusion 106161445 steps, 692282 seconds, refurbed 0 times
[1970-Jan-01 00:48:33.636807]: Steps/mm not configured, tool usage logging will be wrong!
[1970-Jan-01 00:48:33.674583]: GetToolUsageStats called in machine  state 1
[1970-Jan-01 00:48:33.676374]: VerifyToolUsageStatsRetrieved: Done
[1970-Jan-01 00:48:33.678007]: GetToolUsageState: Proceeds to 2
[1970-Jan-01 00:48:33.724284]: GetToolUsageStats called in machine  state 2
[1970-Jan-01 00:48:33.726046]: GetToolUsageState: Done, resets
[1970-Jan-01 00:50:37.133357]: Heater manager Set Target Temperature to 180, index 0
[1970-Jan-01 00:50:37.135145]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 00:51:31.806736]: Toolhead 0 state error: 80
[1970-Jan-01 00:51:41.858035]: Toolhead 0 state error: 0
[1970-Jan-01 00:51:52.490999]: Toolhead 0 state error: 80
[1970-Jan-01 00:52:40.764149]: Toolhead 0 state error: 0
[1970-Jan-01 00:52:42.782829]: Toolhead 0 state error: 80
[1970-Jan-01 00:52:47.302999]: Toolhead 0 state error: 0
[1970-Jan-01 00:52:48.308890]: Toolhead 0 state error: 80
[1970-Jan-01 00:52:50.317829]: Toolhead 0 state error: 0
[1970-Jan-01 00:52:54.338465]: Toolhead 0 state error: 80
[1970-Jan-01 00:52:59.723026]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 00:52:59.724750]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 00:53:00.973119]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 00:54:11.572462]: GetCachedToolUsageStats called
[1970-Jan-01 00:54:13.000934]: Steps overrun! last 65130 and just got 10449
[1970-Jan-01 00:54:13.002778]: calculated 10854
[1970-Jan-01 00:54:16.360942]: Toolhead 0 state error: 0
[1970-Jan-01 00:54:16.847656]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:54:17.557529]: Toolhead 0 state error: 80
[1970-Jan-01 00:54:20.124970]: Toolhead 0 state error: 0
[1970-Jan-01 00:54:21.210236]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:54:21.225314]: Toolhead 0 state error: 80
[1970-Jan-01 00:54:25.286405]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:54:26.990956]: Toolhead 0 state error: 0
[1970-Jan-01 00:54:29.722116]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:54:33.850872]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:54:38.108643]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:54:42.102065]: Toolhead 0 state error: 80
[1970-Jan-01 00:54:42.334576]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:54:46.602246]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:54:48.507000]: Toolhead 0 state error: 0
[1970-Jan-01 00:54:50.702037]: Toolhead 0 state error: 80
[1970-Jan-01 00:54:51.195428]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:54:51.342078]: Toolhead 0 state error: 0
[1970-Jan-01 00:54:55.381972]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:54:55.754002]:  wait for axis 0 full: false offset: 72 l3map offset:    90 status: 1 position 2303 status count 1001
[1970-Jan-01 00:54:58.525921]: Toolhead 0 state error: 80
[1970-Jan-01 00:54:59.732156]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:55:03.069340]: Toolhead 0 state error: 0
[1970-Jan-01 00:55:04.038400]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:55:04.233343]: Toolhead 0 state error: 80
[1970-Jan-01 00:55:04.851152]: Toolhead 0 state error: 0
[1970-Jan-01 00:55:07.634368]: Toolhead 0 state error: 80
[1970-Jan-01 00:55:08.271349]: Toolhead 0 state error: 0
[1970-Jan-01 00:55:08.365792]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:55:08.827639]: Toolhead 0 state error: 80
[1970-Jan-01 00:55:09.447292]: Toolhead 0 state error: 0
[1970-Jan-01 00:55:12.662550]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:55:13.328046]: Toolhead 0 state error: 80
[1970-Jan-01 00:55:16.975328]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:55:21.196458]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:55:24.253590]: Toolhead 0 state error: 0
[1970-Jan-01 00:55:25.554882]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:55:29.491323]: Raw HES proceeding
[1970-Jan-01 00:55:29.518042]: Got raw val 23973, saturated: true
[1970-Jan-01 00:55:29.546228]: Returning HES
[1970-Jan-01 00:55:29.547908]: Sending back val 23973, saturated true
[1970-Jan-01 00:55:29.824384]: GetCachedToolUsageStats called
[1970-Jan-01 00:55:29.866049]: Toolhead Abort
[1970-Jan-01 00:55:29.867793]: aborting pru with shutdown=true
[1970-Jan-01 00:55:29.870382]: Last sync period had (0,0,46776) buffer fulls due to suspend moves
[1970-Jan-01 00:55:29.872312]: Libstepper All Axis Abort
[1970-Jan-01 00:55:29.889465]: Toolhead 0 state error: 80
[1970-Jan-01 00:55:35.981943]: Toolhead 0 state error: 54
[1970-Jan-01 00:55:35.983814]: Tool UID becomes 0.
[1970-Jan-01 01:01:04.073454]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 01:01:04.075199]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:01:10.521403]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 01:01:10.523306]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:01:12.172752]: GetCachedToolUsageStats called
[1970-Jan-01 01:01:12.228240]: GetCachedToolUsageStats called
[1970-Jan-01 01:01:26.672059]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:01:27.160336]: Checking tool eeprom version
[1970-Jan-01 01:01:27.162121]: Commanding tool usage stat retrieve
[1970-Jan-01 01:01:27.163900]: New tool uid 0x220ca9 attached, updating info cache
[1970-Jan-01 01:01:27.297283]: GetCachedToolUsageStats called
[1970-Jan-01 01:01:27.343437]: Last sync period had (0,0,49053) buffer fulls due to suspend moves
[1970-Jan-01 01:01:27.350644]: Syncing turned false
[1970-Jan-01 01:01:27.352419]: Toolhead Abort
[1970-Jan-01 01:01:27.354205]: aborting pru with shutdown=true
[1970-Jan-01 01:01:27.363373]: Last sync period had (0,0,49053) buffer fulls due to suspend moves
[1970-Jan-01 01:01:27.365155]: Libstepper All Axis Abort
[1970-Jan-01 01:01:27.367408]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 01:01:27.369121]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:01:27.371224]: Commanding tool usage stat retrieve
[1970-Jan-01 01:01:27.401111]: Commanding tool usage stat retrieve
[1970-Jan-01 01:01:27.443300]: Commanding tool usage stat retrieve
[1970-Jan-01 01:01:27.455009]: Toolhead 0 state error: 80
[1970-Jan-01 01:01:27.479350]: Commanding tool usage stat retrieve
[1970-Jan-01 01:01:29.928118]: GetCachedToolUsageStats called
[1970-Jan-01 01:01:30.121570]: GetCachedToolUsageStats called
[1970-Jan-01 01:01:30.171060]: Raw usage stats: retract 555783666ct, extrusion 106161445 steps, 692282 seconds, refurbed 0 times
[1970-Jan-01 01:01:30.172826]: Steps/mm not configured, tool usage logging will be wrong!
[1970-Jan-01 01:01:30.899619]: GetCachedToolUsageStats called
[1970-Jan-01 01:01:31.673879]: Raw usage stats: retract 555783666ct, extrusion 106161445 steps, 692282 seconds, refurbed 0 times
[1970-Jan-01 01:01:31.675777]: Steps/mm not configured, tool usage logging will be wrong!
[1970-Jan-01 01:01:32.386329]: GetCachedToolUsageStats called
[1970-Jan-01 01:01:33.181473]: Raw usage stats: retract 555783666ct, extrusion 106161445 steps, 692282 seconds, refurbed 0 times
[1970-Jan-01 01:01:33.183251]: Steps/mm not configured, tool usage logging will be wrong!
[1970-Jan-01 01:01:33.923140]: GetCachedToolUsageStats called
[1970-Jan-01 01:01:34.688350]: Raw usage stats: retract 555783666ct, extrusion 106161445 steps, 692282 seconds, refurbed 0 times
[1970-Jan-01 01:01:34.690401]: Steps/mm not configured, tool usage logging will be wrong!
[1970-Jan-01 01:01:35.404325]: GetCachedToolUsageStats called
[1970-Jan-01 01:01:36.935416]: GetCachedToolUsageStats called
[1970-Jan-01 01:01:38.423641]: GetCachedToolUsageStats called
[1970-Jan-01 01:01:39.923457]: GetCachedToolUsageStats called
[1970-Jan-01 01:01:41.413685]: GetCachedToolUsageStats called
[1970-Jan-01 01:01:42.931335]: GetCachedToolUsageStats called
[1970-Jan-01 01:01:44.434617]: GetCachedToolUsageStats called
[1970-Jan-01 01:01:45.945571]: GetCachedToolUsageStats called
[1970-Jan-01 01:01:47.452550]: GetCachedToolUsageStats called
[1970-Jan-01 01:01:48.950976]: GetCachedToolUsageStats called
[1970-Jan-01 01:01:50.467460]: GetCachedToolUsageStats called
[1970-Jan-01 01:01:51.978388]: GetCachedToolUsageStats called
[1970-Jan-01 01:01:53.483267]: GetCachedToolUsageStats called
[1970-Jan-01 01:01:54.999231]: GetCachedToolUsageStats called
[1970-Jan-01 01:01:56.694890]: GetCachedToolUsageStats called
[1970-Jan-01 01:01:58.019581]: GetCachedToolUsageStats called
[1970-Jan-01 01:01:59.531193]: GetCachedToolUsageStats called
[1970-Jan-01 01:02:01.042559]: GetCachedToolUsageStats called
[1970-Jan-01 01:02:02.553656]: GetCachedToolUsageStats called
[1970-Jan-01 01:02:04.077038]: GetCachedToolUsageStats called
[1970-Jan-01 01:02:05.569763]: GetCachedToolUsageStats called
[1970-Jan-01 01:02:07.087362]: GetCachedToolUsageStats called
[1970-Jan-01 01:02:08.569485]: GetCachedToolUsageStats called
[1970-Jan-01 01:02:10.092221]: GetCachedToolUsageStats called
[1970-Jan-01 01:02:29.328757]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 01:02:29.341544]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:02:30.607443]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:05:10.138621]: GetCachedToolUsageStats called
[1970-Jan-01 01:05:15.090384]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:05:19.351622]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:05:23.811934]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:05:28.435164]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:05:32.752442]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:05:36.980878]: Steps overrun! last 56040 and just got 1359
[1970-Jan-01 01:05:36.982570]: calculated 10854
[1970-Jan-01 01:05:37.591302]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:05:41.897085]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:05:46.205533]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:05:50.774266]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:05:53.411611]:  wait for axis 0 full: false offset: 72 l3map offset:    90 status: 1 position 2303 status count 1001
[1970-Jan-01 01:05:55.280184]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:05:59.936819]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:06:04.402011]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:06:08.887630]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:06:13.627800]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:06:17.993410]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:06:22.788220]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:06:27.962351]: Raw HES proceeding
[1970-Jan-01 01:06:28.024628]: HES not updated!
[1970-Jan-01 01:06:28.095371]: HES not updated!
[1970-Jan-01 01:06:28.156396]: HES not updated!
[1970-Jan-01 01:06:28.203927]: HES not updated!
[1970-Jan-01 01:06:28.258877]: HES not updated!
[1970-Jan-01 01:06:28.297363]: Got raw val 23981, saturated: true
[1970-Jan-01 01:06:28.326256]: Returning HES
[1970-Jan-01 01:06:28.327922]: Sending back val 23981, saturated true
[1970-Jan-01 01:06:28.521738]: GetCachedToolUsageStats called
[1970-Jan-01 01:06:28.555638]: Toolhead Abort
[1970-Jan-01 01:06:28.557359]: aborting pru with shutdown=true
[1970-Jan-01 01:06:28.570843]: Last sync period had (0,0,66918) buffer fulls due to suspend moves
[1970-Jan-01 01:06:28.572607]: Libstepper All Axis Abort
[1970-Jan-01 01:07:10.276796]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 01:07:10.278531]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:07:11.518309]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:07:11.872580]: GetCachedToolUsageStats called
[1970-Jan-01 01:07:14.069626]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:07:18.449445]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:07:23.290550]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:07:27.709732]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:07:32.419066]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:07:36.931942]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:07:41.466663]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:07:46.277100]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:07:50.614633]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:07:55.419362]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:07:58.958446]:  wait for axis 0 full: false offset: 72 l3map offset:    90 status: 1 position 2303 status count 1001
[1970-Jan-01 01:07:59.762452]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:08:04.127327]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:08:08.910453]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:08:13.262629]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:08:17.726271]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:08:22.840296]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:08:27.076615]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:08:29.763624]: Raw HES proceeding
[1970-Jan-01 01:08:29.814701]: HES not updated!
[1970-Jan-01 01:08:29.884295]: HES not updated!
[1970-Jan-01 01:08:29.945010]: HES not updated!
[1970-Jan-01 01:08:29.994335]: HES not updated!
[1970-Jan-01 01:08:30.044862]: HES not updated!
[1970-Jan-01 01:08:30.075209]: Got raw val 23982, saturated: true
[1970-Jan-01 01:08:30.111180]: Returning HES
[1970-Jan-01 01:08:30.112836]: Sending back val 23982, saturated true
[1970-Jan-01 01:08:30.336725]: GetCachedToolUsageStats called
[1970-Jan-01 01:08:30.366202]: Toolhead Abort
[1970-Jan-01 01:08:30.367966]: aborting pru with shutdown=true
[1970-Jan-01 01:08:30.370678]: Last sync period had (0,0,72570) buffer fulls due to suspend moves
[1970-Jan-01 01:08:30.372562]: Libstepper All Axis Abort
[1970-Jan-01 01:08:45.348724]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 01:08:45.360824]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:08:46.563797]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 01:08:46.927002]: GetCachedToolUsageStats called
[1970-Jan-01 01:08:51.824928]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:08:52.997575]: Toolhead 0 state error: 0
[1970-Jan-01 01:08:56.417658]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:09:00.598917]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:09:03.507120]: Toolhead 0 state error: 80
[1970-Jan-01 01:09:04.964941]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:09:08.701768]: Toolhead 0 state error: 0
[1970-Jan-01 01:09:09.674234]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 01:09:13.601518]: Steps overrun! last 55634 and just got 953
[1970-Jan-01 01:09:13.603254]: calculated 10854
[1970-Jan-01 01:09:14.022415]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:09:18.611861]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:09:21.306454]: Toolhead 0 state error: 80
[1970-Jan-01 01:09:23.102229]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:09:27.491711]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:09:30.898242]: Toolhead 0 state error: 0
[1970-Jan-01 01:09:32.153649]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:09:33.088198]:  wait for axis 0 full: false offset: 72 l3map offset:    90 status: 1 position 2303 status count 1001
[1970-Jan-01 01:09:34.912661]: Toolhead 0 state error: 80
[1970-Jan-01 01:09:35.408221]: Toolhead 0 state error: 0
[1970-Jan-01 01:09:36.158524]: Toolhead 0 state error: 80
[1970-Jan-01 01:09:36.301040]: Toolhead 0 state error: 0
[1970-Jan-01 01:09:36.521588]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:09:41.226653]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:09:45.609566]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:09:47.939117]: Toolhead 0 state error: 80
[1970-Jan-01 01:09:49.988243]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:09:54.913956]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:09:59.267756]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 01:10:04.934946]: Raw HES proceeding
[1970-Jan-01 01:10:04.979449]: HES not updated!
[1970-Jan-01 01:10:05.065639]: HES not updated!
[1970-Jan-01 01:10:05.124000]: HES not updated!
[1970-Jan-01 01:10:05.187421]: HES not updated!
[1970-Jan-01 01:10:05.210351]: Got raw val 23978, saturated: true
[1970-Jan-01 01:10:05.238821]: Returning HES
[1970-Jan-01 01:10:05.250871]: Sending back val 23978, saturated true
[1970-Jan-01 01:10:05.426211]: GetCachedToolUsageStats called
[1970-Jan-01 01:10:05.467737]: Toolhead Abort
[1970-Jan-01 01:10:05.471342]: aborting pru with shutdown=true
[1970-Jan-01 01:10:05.474071]: Last sync period had (0,0,78111) buffer fulls due to suspend moves
[1970-Jan-01 01:10:05.475821]: Libstepper All Axis Abort
[1970-Jan-01 01:10:28.881069]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 01:10:28.882980]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:10:31.455537]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 01:10:31.457458]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:10:36.588297]: Heater manager Set Target Temperature to 180, index 0
[1970-Jan-01 01:10:36.629533]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:10:38.816995]: Heater manager Set Target Temperature to 180, index 0
[1970-Jan-01 01:10:38.818780]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 01:10:52.330607]: Toolhead 0 state error: 0
[1970-Jan-01 01:10:53.336483]: Toolhead 0 state error: 80
[1970-Jan-01 01:10:55.371004]: Toolhead 0 state error: 0
[1970-Jan-01 01:11:04.423633]: Toolhead 0 state error: 80
[1970-Jan-01 01:11:38.217933]: Toolhead 0 state error: 0
[1970-Jan-01 01:11:45.264136]: Toolhead 0 state error: 80
[1970-Jan-01 01:14:13.406872]: Toolhead 0 state error: 56
[1970-Jan-01 01:14:15.424787]: Toolhead 0 state error: 80
[1970-Jan-01 05:09:04.256130]: GetCachedToolUsageStats called