[1970-Jan-01 00:00:54.990815]: Log level: info
[1970-Jan-01 00:00:55.382253]: Initializing component: PrinterPanelController
[1970-Jan-01 00:00:55.586917]: Initializing component: PrinterPanelGui
[1970-Jan-01 00:01:15.255587]: Setting language to en
[1970-Jan-01 00:01:15.598525]: Loaded font :/resources/Antenna-Black.otf
[1970-Jan-01 00:01:15.610963]: Loaded families Antenna
[1970-Jan-01 00:01:15.832487]: Loaded font :/resources/Antenna-Bold.otf
[1970-Jan-01 00:01:15.834388]: Loaded families Antenna
[1970-Jan-01 00:01:16.002894]: Loaded font :/resources/Antenna-Regular.otf
[1970-Jan-01 00:01:16.004822]: Loaded families Antenna
[1970-Jan-01 00:01:16.163020]: Loaded font :/resources/Antenna-Medium.otf
[1970-Jan-01 00:01:16.164841]: Loaded families Antenna
[1970-Jan-01 00:01:25.953229]: (UDEV Monitor): Successfully created udev
[1970-Jan-01 00:01:39.573106]: DeauthAccountsPanel::setAccountNum(0) stage: 0
[1970-Jan-01 00:01:39.694112]: Language de requests antenna which is always ok
[1970-Jan-01 00:01:39.695863]: Language en requests antenna which is always ok
[1970-Jan-01 00:01:39.698753]: Language es requests antenna which is always ok
[1970-Jan-01 00:01:39.700704]: Language es_la requests antenna which is always ok
[1970-Jan-01 00:01:39.702488]: Language fr requests antenna which is always ok
[1970-Jan-01 00:01:39.704349]: Language it requests antenna which is always ok
[1970-Jan-01 00:01:39.706111]: Looking for fonts NotoSansCJKjp*
[1970-Jan-01 00:01:39.867315]: Found font type NotoSansCJKjp-Black
[1970-Jan-01 00:01:39.869163]: Found font type NotoSansCJKjp-Bold
[1970-Jan-01 00:01:39.871341]: Found font type NotoSansCJKjp-Medium
[1970-Jan-01 00:01:39.873131]: Found font type NotoSansCJKjp-Regular
[1970-Jan-01 00:01:39.874922]: Found font type NotoSansCJKjp-Black
[1970-Jan-01 00:01:39.876709]: Found font type NotoSansCJKjp-Bold
[1970-Jan-01 00:01:39.878589]: Found font type NotoSansCJKjp-Medium
[1970-Jan-01 00:01:39.880557]: Found font type NotoSansCJKjp-Regular
[1970-Jan-01 00:01:39.882424]: All font types found for ja
[1970-Jan-01 00:01:39.893469]: Looking for fonts NotoSansCJKkr*
[1970-Jan-01 00:01:40.020466]: Found font type NotoSansCJKkr-Black
[1970-Jan-01 00:01:40.022338]: Found font type NotoSansCJKkr-Bold
[1970-Jan-01 00:01:40.024255]: Found font type NotoSansCJKkr-Medium
[1970-Jan-01 00:01:40.026125]: Found font type NotoSansCJKkr-Regular
[1970-Jan-01 00:01:40.027915]: Found font type NotoSansCJKkr-Black
[1970-Jan-01 00:01:40.029692]: Found font type NotoSansCJKkr-Bold
[1970-Jan-01 00:01:40.031823]: Found font type NotoSansCJKkr-Medium
[1970-Jan-01 00:01:40.033616]: Found font type NotoSansCJKkr-Regular
[1970-Jan-01 00:01:40.035435]: All font types found for ko
[1970-Jan-01 00:01:40.037392]: Language pr requests antenna which is always ok
[1970-Jan-01 00:01:40.039338]: Looking for fonts NotoSansCJKsc*
[1970-Jan-01 00:01:40.136418]: Found font type NotoSansCJKsc-Black
[1970-Jan-01 00:01:40.138264]: Found font type NotoSansCJKsc-Bold
[1970-Jan-01 00:01:40.140291]: Found font type NotoSansCJKsc-Medium
[1970-Jan-01 00:01:40.142249]: Found font type NotoSansCJKsc-Regular
[1970-Jan-01 00:01:40.144048]: Found font type NotoSansCJKsc-Black
[1970-Jan-01 00:01:40.146524]: Found font type NotoSansCJKsc-Bold
[1970-Jan-01 00:01:40.148324]: Found font type NotoSansCJKsc-Medium
[1970-Jan-01 00:01:40.150278]: Found font type NotoSansCJKsc-Regular
[1970-Jan-01 00:01:40.152236]: All font types found for zh
[1970-Jan-01 00:01:40.156023]: Available langs:  de en es es_la fr it ja ko pr zh
[1970-Jan-01 00:01:40.899672]: loading status icon height 40 width 14
[1970-Jan-01 00:01:40.902975]: Loaded initial menu item
[1970-Jan-01 00:01:40.995748]: Done loading menu items
[1970-Jan-01 00:02:02.322330]: BasePanel not calling onEntry because not current: Get Started
[1970-Jan-01 00:02:05.264263]: Starting component: PrinterPanelController
[1970-Jan-01 00:02:05.268751]: Starting component: PrinterPanelGui
[1970-Jan-01 00:02:05.315037]: Connecting via socket: /tmp/kaiten.socket
[1970-Jan-01 00:02:05.427836]: Registering printerpanel RPC method: allow_unknown_firmware
[1970-Jan-01 00:02:05.438940]: Registering printerpanel RPC method: authorize_user
[1970-Jan-01 00:02:05.461259]: Registering printerpanel RPC method: error_acknowledged
[1970-Jan-01 00:02:05.463050]: Registering printerpanel RPC method: error_notification
[1970-Jan-01 00:02:05.464961]: Registering printerpanel RPC method: extruder_change
[1970-Jan-01 00:02:05.466674]: Registering printerpanel RPC method: firware_updates_info_change
[1970-Jan-01 00:02:05.468392]: Registering printerpanel RPC method: font_notification
[1970-Jan-01 00:02:05.491490]: Registering printerpanel RPC method: network_state_change
[1970-Jan-01 00:02:05.493241]: Registering printerpanel RPC method: print_file_valid
[1970-Jan-01 00:02:05.494950]: Registering printerpanel RPC method: request_user_input
[1970-Jan-01 00:02:05.496788]: Registering printerpanel RPC method: reset_to_factory
[1970-Jan-01 00:02:05.498511]: Registering printerpanel RPC method: start_diagnostics
[1970-Jan-01 00:02:05.510724]: Registering printerpanel RPC method: state_notification
[1970-Jan-01 00:02:05.512500]: Registering printerpanel RPC method: system_notification
[1970-Jan-01 00:02:05.515565]: Connected!

[1970-Jan-01 00:02:12.812924]: DeauthAccountsPanel::setAccountNum(0) stage: 0
[1970-Jan-01 00:02:13.194723]: Connected Kaiten has version 2.6.2.734
[1970-Jan-01 00:02:13.223012]: DeauthAccountsPanel::setAccountNum(0) stage: 0
[1970-Jan-01 00:02:13.434471]: Move to main screen in splashdone
[1970-Jan-01 00:02:13.649691]: BotModel::stateNotification
[1970-Jan-18 15:04:51.438631]: BotModel::stateNotification
[1970-Jan-18 15:04:51.547632]: load standard step change: running
[1970-Jan-18 15:04:52.545373]: BotModel::stateNotification
[1970-Jan-18 15:04:52.616893]: load standard step change: preheating
[1970-Jan-18 15:07:38.014200]: BotModel::stateNotification
[1970-Jan-18 15:07:38.095230]: load standard step change: extrusion
[1970-Jan-18 15:08:30.667826]: BotModel::stateNotification
[1970-Jan-18 15:08:30.747377]: load standard step change: cleaning_up
[1970-Jan-18 15:08:30.885880]: BotModel::stateNotification
[1970-Jan-18 15:08:30.964467]: load standard step change: done
[1970-Jan-18 15:08:30.966318]: load filament completed
[1970-Jan-18 15:08:31.229140]: BotModel::stateNotification
[1970-Jan-18 15:08:51.148761]: BotModel::stateNotification
[1970-Jan-18 15:08:51.775729]: BotModel::stateNotification
[1970-Jan-18 15:08:52.576487]: BotModel::stateNotification
[1970-Jan-18 15:09:08.716796]: BotModel::stateNotification
[1970-Jan-18 15:09:09.154052]: BotModel::stateNotification
[1970-Jan-18 15:09:09.933673]: BotModel::stateNotification
[1970-Jan-18 15:09:31.264375]:  UnloadFilamentProcess::continueProcess: No active process to continue
[1970-Jan-18 15:09:54.418693]: BotModel::stateNotification
[1970-Jan-18 15:09:54.604766]: BotModel::stateNotification
[1970-Jan-18 15:09:54.824991]: BotModel::stateNotification
[1970-Jan-18 15:09:55.012443]: BotModel::stateNotification
[1970-Jan-18 15:10:23.330648]: DeauthAccountsPanel::setAccountNum(2) stage: 0
[1970-Jan-18 15:35:49.521200]: ChangeExtruderProcess: Transitioned to state: 5
[1970-Jan-18 15:35:52.073627]: ChangeExtruderProcess: Transitioned to state: 2
[1970-Jan-18 15:35:55.212728]: BotModel::stateNotification
[1970-Jan-18 15:35:55.219544]: ChangeExtruderProcess: Transitioned to state: 3
[1970-Jan-18 15:35:57.114113]: BotModel::stateNotification
[1970-Jan-18 15:35:58.123071]: Setting error code
[1970-Jan-18 15:35:58.420694]: BotModel::stateNotification
[1970-Jan-18 15:35:58.426380]: BotModel::stateNotification
[1970-Jan-18 15:35:58.508823]: ChangeExtruderProcess: Transitioned to state: 4
[1970-Jan-18 15:35:58.973217]: BotModel::stateNotification
[1970-Jan-18 15:36:00.774437]: ChangeExtruderProcess: Transitioned to state: 0
[1970-Jan-18 15:36:20.997334]: BotModel::stateNotification
[1970-Jan-18 15:36:21.078838]: load standard step change: running
[1970-Jan-18 15:36:21.655222]: BotModel::stateNotification
[1970-Jan-18 15:36:21.737138]: load standard step change: preheating
[1970-Jan-18 15:39:00.415356]: BotModel::stateNotification
[1970-Jan-18 15:39:00.496358]: load standard step change: extrusion
[1970-Jan-18 15:39:53.199575]: BotModel::stateNotification
[1970-Jan-18 15:39:53.275018]: load standard step change: cleaning_up
[1970-Jan-18 15:39:53.404781]: BotModel::stateNotification
[1970-Jan-18 15:39:53.483990]: load standard step change: done
[1970-Jan-18 15:39:53.485838]: load filament completed
[1970-Jan-18 15:39:53.630669]: BotModel::stateNotification
[1970-Jan-18 15:40:03.843742]: BotModel::stateNotification
[1970-Jan-18 15:40:03.924355]: load standard step change: running
[1970-Jan-18 15:40:04.845013]: BotModel::stateNotification
[1970-Jan-18 15:40:04.922425]: load standard step change: preheating
[1970-Jan-18 15:40:17.352605]: BotModel::stateNotification
[1970-Jan-18 15:40:17.431089]: load standard step change: extrusion
[1970-Jan-18 15:41:09.513823]: BotModel::stateNotification
[1970-Jan-18 15:41:09.586784]: load standard step change: cleaning_up
[1970-Jan-18 15:41:09.745175]: BotModel::stateNotification
[1970-Jan-18 15:41:09.816457]: load standard step change: done
[1970-Jan-18 15:41:09.818320]: load filament completed
[1970-Jan-18 15:41:10.027216]: BotModel::stateNotification
[1970-Jan-18 15:41:40.342496]: BotModel::stateNotification
[1970-Jan-18 15:41:40.531873]: BotModel::stateNotification
[1970-Jan-18 15:41:40.775948]: BotModel::stateNotification
[1970-Jan-18 15:41:40.933889]: BotModel::stateNotification
[1970-Jan-18 15:41:50.370709]: BotModel::stateNotification
[1970-Jan-18 15:41:50.950278]: BotModel::stateNotification
[1970-Jan-18 15:41:51.753374]: BotModel::stateNotification
[1970-Jan-18 15:42:07.375761]: BotModel::stateNotification
[1970-Jan-18 15:42:07.555563]: BotModel::stateNotification
[1970-Jan-18 15:42:08.035858]: BotModel::stateNotification
[1970-Jan-18 15:42:11.616528]:  UnloadFilamentProcess::continueProcess: No active process to continue
[1970-Jan-18 15:43:37.141695]: BotModel::stateNotification
[1970-Jan-18 15:43:37.218674]: load standard step change: running
[1970-Jan-18 15:43:37.783676]: BotModel::stateNotification
[1970-Jan-18 15:43:37.857238]: load standard step change: preheating
[1970-Jan-18 15:44:45.236359]: BotModel::stateNotification
[1970-Jan-18 15:44:45.307159]: load standard step change: extrusion
[1970-Jan-18 15:45:31.225570]: BotModel::stateNotification
[1970-Jan-18 15:45:31.239282]: load standard step change: cancelling
[1970-Jan-18 15:45:32.100337]: Setting error code
[1970-Jan-18 15:45:32.402376]: BotModel::stateNotification
[1970-Jan-18 15:45:32.407476]: load standard step change: cleaning_up
[1970-Jan-18 15:45:32.517039]: BotModel::stateNotification
[1970-Jan-18 15:45:32.596082]: load standard step change: done
[1970-Jan-18 15:45:32.597938]: load filament cancelled
[1970-Jan-18 15:45:32.805547]: BotModel::stateNotification
[1970-Jan-18 15:45:51.791726]: ChangeExtruderProcess: Transitioned to state: 2
[1970-Jan-18 15:45:53.033703]: BotModel::stateNotification
[1970-Jan-18 15:45:53.225833]: BotModel::stateNotification
[1970-Jan-18 15:45:53.379168]: BotModel::stateNotification
[1970-Jan-18 15:45:53.522661]: BotModel::stateNotification
[1970-Jan-18 15:46:00.481557]: BotModel::stateNotification
[1970-Jan-18 15:46:00.549721]: ChangeExtruderProcess: Transitioned to state: 3
[1970-Jan-18 15:46:00.686991]: BotModel::stateNotification
[1970-Jan-18 15:46:00.887118]: BotModel::stateNotification
[1970-Jan-18 15:46:00.958521]: ChangeExtruderProcess: Transitioned to state: 4
[1970-Jan-18 15:46:01.157488]: BotModel::stateNotification
[1970-Jan-18 15:46:03.925043]: ChangeExtruderProcess: Transitioned to state: 0
[1970-Jan-18 15:46:10.818194]: BotModel::stateNotification
[1970-Jan-18 15:46:10.896739]: load standard step change: running
[1970-Jan-18 15:46:11.634368]: BotModel::stateNotification
[1970-Jan-18 15:46:11.832353]: load standard step change: preheating
[1970-Jan-18 15:46:17.324851]: BotModel::stateNotification
[1970-Jan-18 15:46:17.407580]: load standard step change: cancelling
[1970-Jan-18 15:46:17.485139]: BotModel::stateNotification
[1970-Jan-18 15:46:17.566170]: load standard step change: cleaning_up
[1970-Jan-18 15:46:17.645939]: BotModel::stateNotification
[1970-Jan-18 15:46:17.727456]: load standard step change: done
[1970-Jan-18 15:46:17.729376]: load filament cancelled
[1970-Jan-18 15:46:17.939929]: BotModel::stateNotification
[1970-Jan-18 15:46:21.875560]: BotModel::stateNotification
[1970-Jan-18 15:46:22.521724]: BotModel::stateNotification
[1970-Jan-18 15:46:59.180737]: BotModel::stateNotification
[1970-Jan-18 15:47:16.531964]: BotModel::stateNotification
[1970-Jan-18 15:47:16.691257]: BotModel::stateNotification
[1970-Jan-18 15:47:17.153296]: BotModel::stateNotification
[1970-Jan-18 15:53:44.832747]:  UnloadFilamentProcess::continueProcess: No active process to continue
[1970-Jan-18 15:53:49.244942]: BotModel::stateNotification
[1970-Jan-18 15:53:49.316978]: load standard step change: running
[1970-Jan-18 15:53:49.832452]: BotModel::stateNotification
[1970-Jan-18 15:53:49.907366]: load standard step change: preheating
[1970-Jan-18 15:54:27.620217]: BotModel::stateNotification
[1970-Jan-18 15:54:27.626043]: load standard step change: cancelling
[1970-Jan-18 15:54:28.512267]: Setting error code
[1970-Jan-18 15:54:28.891634]: BotModel::stateNotification
[1970-Jan-18 15:54:28.896876]: load standard step change: cleaning_up
[1970-Jan-18 15:54:28.937733]: BotModel::stateNotification
[1970-Jan-18 15:54:28.958667]: load standard step change: done
[1970-Jan-18 15:54:28.986101]: load filament cancelled
[1970-Jan-18 15:54:29.373025]: BotModel::stateNotification
[1970-Jan-18 16:01:31.851723]: ChangeExtruderProcess: Transitioned to state: 2
[1970-Jan-18 16:01:33.046356]: BotModel::stateNotification
[1970-Jan-18 16:01:33.172294]: BotModel::stateNotification
[1970-Jan-18 16:01:33.306162]: BotModel::stateNotification
[1970-Jan-18 16:01:33.417714]: BotModel::stateNotification
[1970-Jan-18 16:01:35.395953]: BotModel::stateNotification
[1970-Jan-18 16:01:35.407274]: ChangeExtruderProcess: Transitioned to state: 3
[1970-Jan-18 16:01:37.313788]: BotModel::stateNotification
[1970-Jan-18 16:01:38.162114]: Setting error code
[1970-Jan-18 16:01:38.301868]: BotModel::stateNotification
[1970-Jan-18 16:01:38.309694]: BotModel::stateNotification
[1970-Jan-18 16:01:38.325721]: ChangeExtruderProcess: Transitioned to state: 6
[1970-Jan-18 16:01:38.443037]: BotModel::stateNotification
[1970-Jan-18 16:01:41.571660]: ChangeExtruderProcess: Transitioned to state: 2
[1970-Jan-18 16:01:43.744162]: BotModel::stateNotification
[1970-Jan-18 16:01:43.828936]: ChangeExtruderProcess: Transitioned to state: 3
[1970-Jan-18 16:01:44.146620]: BotModel::stateNotification
[1970-Jan-18 16:01:44.423408]: BotModel::stateNotification
[1970-Jan-18 16:01:44.504292]: ChangeExtruderProcess: Transitioned to state: 4
[1970-Jan-18 16:01:44.707695]: BotModel::stateNotification
[1970-Jan-18 16:01:46.595005]: ChangeExtruderProcess: Transitioned to state: 0
[1970-Jan-18 16:02:24.698537]: BotModel::stateNotification
[1970-Jan-18 16:02:24.766372]: load standard step change: running
[1970-Jan-18 16:02:25.265638]: BotModel::stateNotification
[1970-Jan-18 16:02:25.346871]: load standard step change: preheating
[1970-Jan-18 16:04:46.476477]: BotModel::stateNotification
[1970-Jan-18 16:04:46.568111]: load standard step change: extrusion
[1970-Jan-18 16:05:01.395609]: Setting error code
[1970-Jan-18 16:05:02.922807]: BotModel::stateNotification
[1970-Jan-18 16:05:03.667476]: load standard step change: unloading_filament
[1970-Jan-18 16:05:21.808146]: BotModel::stateNotification
[1970-Jan-18 16:05:22.619335]: load standard step change: cancelling
[1970-Jan-18 16:05:22.633523]: BotModel::stateNotification
[1970-Jan-18 16:05:22.717739]: load standard step change: cleaning_up
[1970-Jan-18 16:05:22.731830]: BotModel::stateNotification
[1970-Jan-18 16:05:22.810483]: load standard step change: done
[1970-Jan-18 16:05:22.812473]: load filament cancelled
[1970-Jan-18 16:05:22.888521]: BotModel::stateNotification
[1970-Jan-18 16:05:26.445679]: BotModel::stateNotification
[1970-Jan-18 16:05:26.534029]: load standard step change: running
[1970-Jan-18 16:05:27.053040]: BotModel::stateNotification
[1970-Jan-18 16:05:27.123156]: load standard step change: preheating
[1970-Jan-18 16:05:27.836793]: BotModel::stateNotification
[1970-Jan-18 16:05:27.921554]: load standard step change: extrusion
[1970-Jan-18 16:06:17.139636]: BotModel::stateNotification
[1970-Jan-18 16:06:17.217857]: load standard step change: cancelling
[1970-Jan-18 16:06:17.419084]: BotModel::stateNotification
[1970-Jan-18 16:06:17.497843]: load standard step change: cleaning_up
[1970-Jan-18 16:06:18.296677]: BotModel::stateNotification
[1970-Jan-18 16:06:18.382023]: load standard step change: done
[1970-Jan-18 16:06:18.384001]: load filament cancelled
[1970-Jan-18 16:06:18.599564]: BotModel::stateNotification
[1970-Jan-18 16:06:32.857723]: BotModel::stateNotification
[1970-Jan-18 16:06:33.444926]: BotModel::stateNotification
[1970-Jan-18 16:06:34.819393]: BotModel::stateNotification
[1970-Jan-18 16:06:50.173842]: BotModel::stateNotification
[1970-Jan-18 16:06:50.361421]: BotModel::stateNotification
[1970-Jan-18 16:06:50.826663]: BotModel::stateNotification
[1970-Jan-18 16:18:55.163183]:  UnloadFilamentProcess::continueProcess: No active process to continue
[1970-Jan-18 16:27:44.985420]: BotModel::stateNotification
[1970-Jan-18 16:27:45.062971]: load standard step change: running
[1970-Jan-18 16:27:45.584049]: BotModel::stateNotification
[1970-Jan-18 16:27:45.662483]: load standard step change: preheating
[1970-Jan-18 16:30:32.927653]: BotModel::stateNotification
[1970-Jan-18 16:30:32.999333]: load standard step change: extrusion
[1970-Jan-18 16:31:24.911149]: BotModel::stateNotification
[1970-Jan-18 16:31:24.991699]: load standard step change: cleaning_up
[1970-Jan-18 16:31:25.238426]: BotModel::stateNotification
[1970-Jan-18 16:31:25.439440]: load standard step change: done
[1970-Jan-18 16:31:25.479854]: load filament completed
[1970-Jan-18 16:31:25.699418]: BotModel::stateNotification
[1970-Jan-18 16:31:27.828417]: BotModel::stateNotification
[1970-Jan-18 16:31:27.907285]: load standard step change: running
[1970-Jan-18 16:31:28.460285]: BotModel::stateNotification
[1970-Jan-18 16:31:28.537495]: load standard step change: preheating
[1970-Jan-18 16:31:42.948728]: BotModel::stateNotification
[1970-Jan-18 16:31:43.027022]: load standard step change: extrusion
[1970-Jan-18 16:32:21.258949]: Setting error code
[1970-Jan-18 16:32:21.522794]: BotModel::stateNotification
[1970-Jan-18 16:32:21.902332]: load standard step change: unloading_filament
[1970-Jan-18 16:32:39.714452]: BotModel::stateNotification
[1970-Jan-18 16:32:41.122667]: load standard step change: cancelling
[1970-Jan-18 16:32:41.126452]: BotModel::stateNotification
[1970-Jan-18 16:32:41.142742]: load standard step change: cleaning_up
[1970-Jan-18 16:32:41.145087]: BotModel::stateNotification
[1970-Jan-18 16:32:41.160287]: load standard step change: done
[1970-Jan-18 16:32:41.162501]: load filament cancelled
[1970-Jan-18 16:32:41.164953]: BotModel::stateNotification
[1970-Jan-18 16:33:53.185649]: BotModel::stateNotification
[1970-Jan-18 16:33:53.263355]: load standard step change: running
[1970-Jan-18 16:33:53.784332]: BotModel::stateNotification
[1970-Jan-18 16:33:53.857540]: load standard step change: preheating
[1970-Jan-18 16:35:02.401962]: BotModel::stateNotification
[1970-Jan-18 16:35:02.472325]: load standard step change: extrusion
[1970-Jan-18 16:35:14.896595]: Setting error code
[1970-Jan-18 16:35:15.163370]: BotModel::stateNotification
[1970-Jan-18 16:35:15.407672]: load standard step change: unloading_filament
[1970-Jan-18 16:35:33.574750]: BotModel::stateNotification
[1970-Jan-18 16:35:34.396729]: load standard step change: cancelling
[1970-Jan-18 16:35:34.410929]: BotModel::stateNotification
[1970-Jan-18 16:35:34.491029]: load standard step change: cleaning_up
[1970-Jan-18 16:35:34.493470]: BotModel::stateNotification
[1970-Jan-18 16:35:34.568851]: load standard step change: done
[1970-Jan-18 16:35:34.581035]: load filament cancelled
[1970-Jan-18 16:35:34.583378]: BotModel::stateNotification
[1970-Jan-18 16:35:38.275734]: BotModel::stateNotification
[1970-Jan-18 16:35:39.078556]: BotModel::stateNotification
[1970-Jan-18 16:35:40.697488]: BotModel::stateNotification
[1970-Jan-18 16:35:55.315879]: BotModel::stateNotification
[1970-Jan-18 16:35:55.483251]: BotModel::stateNotification
[1970-Jan-18 16:35:55.960502]: BotModel::stateNotification
[1970-Jan-18 16:35:57.596616]:  UnloadFilamentProcess::continueProcess: No active process to continue
[1970-Jan-18 16:36:01.775419]: BotModel::stateNotification
[1970-Jan-18 16:36:01.849871]: load standard step change: running
[1970-Jan-18 16:36:02.345904]: BotModel::stateNotification
[1970-Jan-18 16:36:02.425480]: load standard step change: preheating
[1970-Jan-18 16:36:18.096751]: BotModel::stateNotification
[1970-Jan-18 16:36:18.173974]: load standard step change: extrusion
[1970-Jan-18 16:36:30.769212]: Setting error code
[1970-Jan-18 16:36:30.961919]: BotModel::stateNotification
[1970-Jan-18 16:36:31.360793]: load standard step change: unloading_filament
[1970-Jan-18 16:36:46.977110]: BotModel::stateNotification
[1970-Jan-18 16:36:48.096702]: load standard step change: cancelling
[1970-Jan-18 16:36:48.984492]: Setting error code
[1970-Jan-18 16:36:49.265005]: BotModel::stateNotification
[1970-Jan-18 16:36:49.284004]: load standard step change: cleaning_up
[1970-Jan-18 16:36:49.300397]: BotModel::stateNotification
[1970-Jan-18 16:36:49.305984]: load standard step change: done
[1970-Jan-18 16:36:49.307936]: load filament cancelled
[1970-Jan-18 16:36:49.314961]: BotModel::stateNotification
[1970-Jan-18 16:37:07.271728]: ChangeExtruderProcess: Transitioned to state: 2
[1970-Jan-18 16:37:08.898426]: BotModel::stateNotification
[1970-Jan-18 16:37:09.051287]: BotModel::stateNotification
[1970-Jan-18 16:37:09.206799]: BotModel::stateNotification
[1970-Jan-18 16:37:09.349465]: BotModel::stateNotification
[1970-Jan-18 16:37:22.518878]: BotModel::stateNotification
[1970-Jan-18 16:37:22.595376]: ChangeExtruderProcess: Transitioned to state: 3
[1970-Jan-18 16:37:22.731212]: BotModel::stateNotification
[1970-Jan-18 16:37:22.910417]: BotModel::stateNotification
[1970-Jan-18 16:37:22.986646]: ChangeExtruderProcess: Transitioned to state: 4
[1970-Jan-18 16:37:23.179105]: BotModel::stateNotification
[1970-Jan-18 16:37:25.474515]: ChangeExtruderProcess: Transitioned to state: 0
[1970-Jan-18 16:37:29.961810]: BotModel::stateNotification
[1970-Jan-18 16:37:30.036462]: load standard step change: running
[1970-Jan-18 16:37:30.539007]: BotModel::stateNotification
[1970-Jan-18 16:37:30.616170]: load standard step change: preheating
[1970-Jan-18 16:38:24.141960]: BotModel::stateNotification
[1970-Jan-18 16:38:24.225074]: load standard step change: extrusion
[1970-Jan-18 16:39:07.495245]: Setting error code
[1970-Jan-18 16:39:09.114262]: BotModel::stateNotification
[1970-Jan-18 16:39:09.363134]: load standard step change: unloading_filament
[1970-Jan-18 16:39:28.082160]: BotModel::stateNotification
[1970-Jan-18 16:39:29.198175]: load standard step change: cancelling
[1970-Jan-18 16:39:29.215451]: BotModel::stateNotification
[1970-Jan-18 16:39:29.347634]: load standard step change: cleaning_up
[1970-Jan-18 16:39:29.360328]: BotModel::stateNotification
[1970-Jan-18 16:39:29.440904]: load standard step change: done
[1970-Jan-18 16:39:29.442901]: load filament cancelled
[1970-Jan-18 16:39:29.445443]: BotModel::stateNotification
[1970-Jan-18 16:39:33.140807]: BotModel::stateNotification
[1970-Jan-18 16:39:33.199918]: load standard step change: running
[1970-Jan-18 16:39:33.746682]: BotModel::stateNotification
[1970-Jan-18 16:39:33.824030]: load standard step change: preheating
[1970-Jan-18 16:39:34.544026]: BotModel::stateNotification
[1970-Jan-18 16:39:34.624254]: load standard step change: extrusion
[1970-Jan-18 16:40:25.839117]: BotModel::stateNotification
[1970-Jan-18 16:40:26.057009]: load standard step change: cleaning_up
[1970-Jan-18 16:40:26.453398]: BotModel::stateNotification
[1970-Jan-18 16:40:26.535455]: load standard step change: done
[1970-Jan-18 16:40:26.537407]: load filament completed
[1970-Jan-18 16:40:26.682838]: BotModel::stateNotification
[1970-Jan-18 16:43:26.799973]: BotModel::stateNotification
[1970-Jan-18 16:43:26.877877]: load standard step change: running
[1970-Jan-18 16:43:27.397586]: BotModel::stateNotification
[1970-Jan-18 16:43:27.491761]: load standard step change: preheating
[1970-Jan-18 16:45:23.526309]: BotModel::stateNotification
[1970-Jan-18 16:45:23.606792]: load standard step change: extrusion
[1970-Jan-18 16:46:15.628802]: BotModel::stateNotification
[1970-Jan-18 16:46:15.714263]: load standard step change: cleaning_up
[1970-Jan-18 16:46:15.998064]: BotModel::stateNotification
[1970-Jan-18 16:46:16.085715]: load standard step change: done
[1970-Jan-18 16:46:16.100986]: load filament completed
[1970-Jan-18 16:46:16.221097]: BotModel::stateNotification
[1970-Jan-18 16:46:26.395317]: BotModel::stateNotification
[1970-Jan-18 16:46:26.916909]: BotModel::stateNotification
[1970-Jan-18 16:46:27.638040]: BotModel::stateNotification
[1970-Jan-18 16:46:43.580697]: BotModel::stateNotification
[1970-Jan-18 16:46:43.753620]: BotModel::stateNotification
[1970-Jan-18 16:46:44.226431]: BotModel::stateNotification
[1970-Jan-18 16:57:26.819287]:  UnloadFilamentProcess::continueProcess: No active process to continue
[1970-Jan-18 16:57:31.686972]: BotModel::stateNotification
[1970-Jan-18 16:57:31.758288]: load standard step change: running
[1970-Jan-18 16:57:32.643753]: BotModel::stateNotification
[1970-Jan-18 16:57:32.724610]: load standard step change: preheating
[1970-Jan-18 16:59:58.843217]: BotModel::stateNotification
[1970-Jan-18 16:59:58.925503]: load standard step change: extrusion
[1970-Jan-18 17:00:24.088139]: Setting error code
[1970-Jan-18 17:00:24.423175]: BotModel::stateNotification
[1970-Jan-18 17:00:24.823605]: load standard step change: unloading_filament
[1970-Jan-18 17:00:42.920962]: BotModel::stateNotification
[1970-Jan-18 17:00:43.723065]: load standard step change: cancelling
[1970-Jan-18 17:00:43.726977]: BotModel::stateNotification
[1970-Jan-18 17:00:43.805696]: load standard step change: cleaning_up
[1970-Jan-18 17:00:43.933526]: BotModel::stateNotification
[1970-Jan-18 17:00:44.021911]: load standard step change: done
[1970-Jan-18 17:00:44.023814]: load filament cancelled
[1970-Jan-18 17:00:44.091594]: BotModel::stateNotification
[1970-Jan-18 17:00:50.053966]: BotModel::stateNotification
[1970-Jan-18 17:00:50.131557]: load standard step change: running
[1970-Jan-18 17:00:50.644604]: BotModel::stateNotification
[1970-Jan-18 17:00:50.718775]: load standard step change: preheating
[1970-Jan-18 17:00:51.456649]: BotModel::stateNotification
[1970-Jan-18 17:00:51.534916]: load standard step change: extrusion
[1970-Jan-18 17:01:22.517347]: BotModel::stateNotification
[1970-Jan-18 17:01:22.534982]: load standard step change: cancelling
[1970-Jan-18 17:01:23.743123]: Setting error code
[1970-Jan-18 17:01:24.026982]: BotModel::stateNotification
[1970-Jan-18 17:01:24.042541]: load standard step change: cleaning_up
[1970-Jan-18 17:01:24.060570]: BotModel::stateNotification
[1970-Jan-18 17:01:24.065608]: load standard step change: done
[1970-Jan-18 17:01:24.067437]: load filament cancelled
[1970-Jan-18 17:01:24.301496]: BotModel::stateNotification
[1970-Jan-18 17:03:03.261839]: ChangeExtruderProcess: Transitioned to state: 2
[1970-Jan-18 17:03:04.632266]: BotModel::stateNotification
[1970-Jan-18 17:03:04.753120]: BotModel::stateNotification
[1970-Jan-18 17:03:04.863413]: BotModel::stateNotification
[1970-Jan-18 17:03:04.976025]: BotModel::stateNotification
[1970-Jan-18 17:03:08.336738]: BotModel::stateNotification
[1970-Jan-18 17:03:08.353412]: ChangeExtruderProcess: Transitioned to state: 3
[1970-Jan-18 17:03:09.857776]: BotModel::stateNotification
[1970-Jan-18 17:03:10.085976]: BotModel::stateNotification
[1970-Jan-18 17:03:10.159180]: ChangeExtruderProcess: Transitioned to state: 4
[1970-Jan-18 17:03:10.436585]: BotModel::stateNotification
[1970-Jan-18 17:03:13.964609]: ChangeExtruderProcess: Transitioned to state: 0
[1970-Jan-18 17:03:19.422694]: BotModel::stateNotification
[1970-Jan-18 17:03:19.503604]: load standard step change: running
[1970-Jan-18 17:03:20.018054]: BotModel::stateNotification
[1970-Jan-18 17:03:20.089978]: load standard step change: preheating
[1970-Jan-18 17:04:35.300290]: BotModel::stateNotification
[1970-Jan-18 17:04:35.375773]: load standard step change: extrusion
[1970-Jan-18 17:05:11.217690]: BotModel::stateNotification
[1970-Jan-18 17:05:11.300510]: load standard step change: cancelling
[1970-Jan-18 17:05:11.636252]: BotModel::stateNotification
[1970-Jan-18 17:05:11.723439]: load standard step change: cleaning_up
[1970-Jan-18 17:05:12.216306]: BotModel::stateNotification
[1970-Jan-18 17:05:12.295057]: load standard step change: done
[1970-Jan-18 17:05:12.296895]: load filament cancelled
[1970-Jan-18 17:05:12.524703]: BotModel::stateNotification
[1970-Jan-18 17:05:52.802264]: BotModel::stateNotification
[1970-Jan-18 17:05:52.886805]: load standard step change: running
[1970-Jan-18 17:05:53.432068]: BotModel::stateNotification
[1970-Jan-18 17:05:53.501165]: load standard step change: preheating
[1970-Jan-18 17:05:54.440735]: BotModel::stateNotification
[1970-Jan-18 17:05:54.506220]: load standard step change: extrusion
[1970-Jan-18 17:06:44.777948]: BotModel::stateNotification
[1970-Jan-18 17:06:44.854287]: load standard step change: cleaning_up
[1970-Jan-18 17:06:45.051930]: BotModel::stateNotification
[1970-Jan-18 17:06:45.128149]: load standard step change: done
[1970-Jan-18 17:06:45.150280]: load filament completed
[1970-Jan-18 17:06:45.435646]: BotModel::stateNotification
[1970-Jan-18 17:12:35.585147]: BotModel::stateNotification
[1970-Jan-18 17:12:35.743693]: BotModel::stateNotification
[1970-Jan-18 17:12:35.914088]: BotModel::stateNotification
[1970-Jan-18 17:12:36.075774]: BotModel::stateNotification
[1970-Jan-18 17:13:06.349378]: DeauthAccountsPanel::setAccountNum(2) stage: 0
[1970-Jan-18 17:13:29.242244]: BotModel::stateNotification
[1970-Jan-18 17:13:29.319154]: ASSISTED_LEVEL_PROC WARNING: Encountered an unknown step change(running) in a state notification

[1970-Jan-18 17:13:29.796175]: BotModel::stateNotification
[1970-Jan-18 17:13:30.542872]: BotModel::stateNotification
[1970-Jan-18 17:13:36.527512]: BotModel::stateNotification
[1970-Jan-18 17:13:36.597288]: BasePanel not calling onEntry because not current: Unloading Filament (1/3)
[1970-Jan-18 17:14:12.377069]: BotModel::stateNotification
[1970-Jan-18 17:14:13.209018]: BotModel::stateNotification
[1970-Jan-18 17:14:13.288152]: ASSISTED_LEVEL_PROC WARNING: Encountered an unknown step change(cleaning_up) in a state notification

[1970-Jan-18 17:14:13.388671]: BotModel::stateNotification
[1970-Jan-18 17:14:13.627857]: BotModel::stateNotification
[1970-Jan-18 17:14:13.708184]: ASSISTED_LEVEL_PROC WARNING: Encountered an unknown step change(done) in a state notification

[1970-Jan-18 17:14:14.297668]: BotModel::stateNotification
[1970-Jan-18 17:14:14.670827]: BotModel::stateNotification
[1970-Jan-18 17:14:14.823119]: BotModel::stateNotification
[1970-Jan-18 17:14:14.976470]: BotModel::stateNotification
[1970-Jan-18 17:14:15.114855]: BotModel::stateNotification
[1970-Jan-18 17:14:15.374642]: DeauthAccountsPanel::setAccountNum(2) stage: 0
[1970-Jan-18 17:14:21.473873]: FilePrintDialog::startPrintClicked()
[1970-Jan-18 17:14:21.931372]: PrintProcess state change: 1
[1970-Jan-18 17:14:23.140334]: print monitor shown
[1970-Jan-18 17:14:24.088876]: BotModel::stateNotification
[1970-Jan-18 17:14:24.193774]: built from filename
[1970-Jan-18 17:14:25.596052]: BotModel::stateNotification
[1970-Jan-18 17:14:25.668168]: PrintProcess state change: 6
[1970-Jan-18 17:14:25.872013]: print monitor shown
[1970-Jan-18 17:15:23.174278]: BotModel::stateNotification
[1970-Jan-18 17:15:23.261702]: PrintProcess state change: 9
[1970-Jan-18 17:15:23.328903]: print monitor shown
[1970-Jan-18 17:15:59.996492]: BotModel::stateNotification
[1970-Jan-18 17:16:00.158960]: PrintProcess state change: 10
[1970-Jan-18 17:16:00.306603]: print monitor shown
[1970-Jan-18 17:16:30.883009]: BotModel::stateNotification
[1970-Jan-18 17:16:30.971947]: PrintProcess state change: 7
[1970-Jan-18 17:16:31.051039]: print monitor shown
[1970-Jan-18 17:17:29.550503]: BotModel::stateNotification
[1970-Jan-18 17:17:29.629449]: PrintProcess state change: 13
[1970-Jan-18 17:17:30.790699]: print monitor shown
[1970-Jan-18 17:18:43.728767]: print monitor shown
[1970-Jan-18 17:18:47.361405]: print monitor shown
[1970-Jan-18 17:18:50.201367]: BotModel::stateNotification
[1970-Jan-18 17:18:50.278100]: PrintProcess state change: 15
[1970-Jan-18 17:18:50.400843]: print monitor shown
[1970-Jan-18 17:18:52.111962]: BotModel::stateNotification
[1970-Jan-18 17:18:52.193485]: PrintProcess state change: 29
[1970-Jan-18 17:18:52.212626]: print monitor shown
[1970-Jan-18 17:19:03.674460]: BotModel::stateNotification
[1970-Jan-18 17:19:03.762732]: PrintProcess state change: 20
[1970-Jan-18 17:19:03.765058]: BasePanel not calling onEntry because not current: Unloading Filament (1/3)
[1970-Jan-18 17:19:04.677033]: BotModel::stateNotification
[1970-Jan-18 17:19:04.759373]: PrintProcess state change: 23
[1970-Jan-18 17:19:23.445403]: BotModel::stateNotification
[1970-Jan-18 17:19:23.516335]: PrintProcess state change: 29
[1970-Jan-18 17:19:23.852700]: print monitor shown
[1970-Jan-18 17:19:24.660818]: BotModel::stateNotification
[1970-Jan-18 17:19:24.736752]: PrintProcess state change: 31
[1970-Jan-18 17:19:24.756234]: print monitor shown
[1970-Jan-18 17:19:24.759120]: PrintProcess state change: 0
[1970-Jan-18 17:19:24.882638]: BotModel::stateNotification
[1970-Jan-18 17:23:51.637501]: print monitor shown
[1970-Jan-18 17:23:51.658318]: print monitor shown
[1970-Jan-18 17:23:51.678072]: print monitor shown
[1970-Jan-18 17:23:51.697601]: print monitor shown
[1970-Jan-18 17:23:51.716986]: print monitor shown
[1970-Jan-18 17:23:51.736785]: print monitor shown
[1970-Jan-18 17:23:51.757106]: print monitor shown
[1970-Jan-18 17:23:51.786580]: print monitor shown
[1970-Jan-18 17:23:51.805907]: print monitor shown
[1970-Jan-18 17:24:02.279860]: BotModel::stateNotification
[1970-Jan-18 17:24:02.918979]: BotModel::stateNotification
[1970-Jan-18 17:26:14.559464]: BotModel::stateNotification
[1970-Jan-18 17:26:30.997955]: BotModel::stateNotification
[1970-Jan-18 17:26:31.147814]: BotModel::stateNotification
[1970-Jan-18 17:26:31.618970]: BotModel::stateNotification
[1970-Jan-18 17:26:43.559378]:  UnloadFilamentProcess::continueProcess: No active process to continue
[1970-Jan-18 17:26:46.391748]: BotModel::stateNotification
[1970-Jan-18 17:26:46.560467]: BotModel::stateNotification
[1970-Jan-18 17:26:46.733513]: BotModel::stateNotification
[1970-Jan-18 17:26:46.923176]: BotModel::stateNotification
[1970-Jan-21 17:40:07.860728]: BotModel::stateNotification
[1970-Jan-21 17:40:07.942352]: load standard step change: running
[1970-Jan-21 17:40:08.635531]: BotModel::stateNotification
[1970-Jan-21 17:40:08.715802]: load standard step change: preheating
[1970-Jan-21 17:43:02.752077]: BotModel::stateNotification
[1970-Jan-21 17:43:02.833722]: load standard step change: extrusion
[1970-Jan-21 17:43:24.059497]: BotModel::stateNotification
[1970-Jan-21 17:43:24.143890]: load standard step change: cancelling
[1970-Jan-21 17:43:24.415308]: BotModel::stateNotification
[1970-Jan-21 17:43:24.487171]: load standard step change: cleaning_up
[1970-Jan-21 17:43:24.931726]: BotModel::stateNotification
[1970-Jan-21 17:43:25.013477]: load standard step change: done
[1970-Jan-21 17:43:25.016493]: load filament cancelled
[1970-Jan-21 17:43:25.251453]: BotModel::stateNotification
[1970-Jan-21 17:43:32.906045]: BotModel::stateNotification
[1970-Jan-21 17:43:33.169939]: BotModel::stateNotification
[1970-Jan-21 17:43:33.380736]: BotModel::stateNotification
[1970-Jan-21 17:43:33.574857]: BotModel::stateNotification
[1970-Jan-21 17:43:39.441506]: FilePrintDialog::startPrintClicked()
[1970-Jan-21 17:43:39.822503]: PrintProcess state change: 1
[1970-Jan-21 17:43:40.393847]: print monitor shown
[1970-Jan-21 17:43:42.124461]: BotModel::stateNotification
[1970-Jan-21 17:43:42.213064]: built from filename
[1970-Jan-21 17:43:44.146758]: BotModel::stateNotification
[1970-Jan-21 17:43:44.226635]: PrintProcess state change: 8
[1970-Jan-21 17:43:44.415453]: print monitor shown
[1970-Jan-21 17:44:08.685172]: print monitor shown
[1970-Jan-21 17:44:40.218762]: BotModel::stateNotification
[1970-Jan-21 17:44:40.406854]: PrintProcess state change: 9
[1970-Jan-21 17:44:40.614924]: print monitor shown
[1970-Jan-21 17:45:17.975897]: BotModel::stateNotification
[1970-Jan-21 17:45:18.055066]: PrintProcess state change: 10
[1970-Jan-21 17:45:18.112760]: print monitor shown
[1970-Jan-21 17:45:49.981182]: BotModel::stateNotification
[1970-Jan-21 17:45:50.056417]: PrintProcess state change: 7
[1970-Jan-21 17:45:50.127449]: print monitor shown
[1970-Jan-21 17:46:43.504460]: BotModel::stateNotification
[1970-Jan-21 17:46:43.583977]: PrintProcess state change: 13
[1970-Jan-21 17:46:43.627489]: print monitor shown
[1970-Jan-21 17:47:28.253792]: print monitor shown
[1970-Jan-21 17:47:32.685840]: BotModel::stateNotification
[1970-Jan-21 17:47:32.763375]: PrintProcess state change: 15
[1970-Jan-21 17:47:32.842478]: print monitor shown
[1970-Jan-21 17:47:34.524816]: BotModel::stateNotification
[1970-Jan-21 17:47:34.597786]: PrintProcess state change: 29
[1970-Jan-21 17:47:34.617116]: print monitor shown
[1970-Jan-21 17:47:43.237896]: BotModel::stateNotification
[1970-Jan-21 17:47:43.317094]: PrintProcess state change: 20
[1970-Jan-21 17:47:43.319372]: BasePanel not calling onEntry because not current: Unloading Filament (1/3)
[1970-Jan-21 17:47:52.956394]: BotModel::stateNotification
[1970-Jan-21 17:47:53.028776]: PrintProcess state change: 29
[1970-Jan-21 17:47:53.364369]: print monitor shown
[1970-Jan-21 17:47:53.738071]: BotModel::stateNotification
[1970-Jan-21 17:47:53.816678]: PrintProcess state change: 31
[1970-Jan-21 17:47:53.832567]: print monitor shown
[1970-Jan-21 17:47:53.835437]: PrintProcess state change: 0
[1970-Jan-21 17:47:54.049034]: BotModel::stateNotification
[1970-Jan-21 17:47:55.936227]: print monitor shown
[1970-Jan-21 17:47:55.956926]: print monitor shown
[1970-Jan-21 17:47:55.976136]: print monitor shown
[1970-Jan-21 17:47:55.993297]: print monitor shown
[1970-Jan-21 17:47:56.023780]: print monitor shown
[1970-Jan-21 17:47:56.041847]: print monitor shown
[1970-Jan-21 17:47:56.062685]: print monitor shown
[1970-Jan-21 17:47:56.081175]: print monitor shown
[1970-Jan-21 17:47:56.101832]: print monitor shown
[1970-Jan-22 17:26:23.448425]: BotModel::stateNotification
[1970-Jan-22 17:26:23.528510]: built from filename
[1970-Jan-22 17:26:23.540648]: qtinything couldn't unzip metadata
[1970-Jan-22 17:26:23.898669]: PrintProcess state change: 1
[1970-Jan-22 17:26:24.132583]: goToPreviousScreen: screen BuildScreennot in history!
[1970-Jan-22 17:26:24.255689]: print monitor shown
[1970-Jan-22 17:26:24.987860]: BotModel::stateNotification
[1970-Jan-22 17:26:25.068036]: PrintProcess state change: 26
[1970-Jan-22 17:26:32.729236]: BotModel::stateNotification
[1970-Jan-22 17:26:32.807461]: PrintProcess state change: 15
[1970-Jan-22 17:26:32.905945]: print monitor shown
[1970-Jan-22 17:26:34.462827]: BotModel::stateNotification
[1970-Jan-22 17:26:34.672462]: PrintProcess state change: 29
[1970-Jan-22 17:26:34.701188]: print monitor shown
[1970-Jan-22 17:26:35.803466]: BotModel::stateNotification
[1970-Jan-22 17:26:35.888830]: PrintProcess state change: 20
[1970-Jan-22 17:26:35.891296]: BasePanel not calling onEntry because not current: Unloading Filament (1/3)
[1970-Jan-22 17:29:18.721144]: BotModel::stateNotification
[1970-Jan-22 17:29:18.796530]: PrintProcess state change: 23
[1970-Jan-22 17:29:39.195001]: BotModel::stateNotification
[1970-Jan-22 17:29:39.282326]: PrintProcess state change: 29
[1970-Jan-22 17:29:39.601410]: print monitor shown
[1970-Jan-22 17:29:39.604876]: BotModel::stateNotification
[1970-Jan-22 17:29:39.686639]: PrintProcess state change: 31
[1970-Jan-22 17:29:39.705542]: print monitor shown
[1970-Jan-22 17:29:39.708244]: PrintProcess state change: 0
[1970-Jan-22 17:29:39.933901]: BotModel::stateNotification
[1970-Jan-28 19:21:30.712489]: print monitor shown
[1970-Jan-28 19:21:30.731041]: print monitor shown
[1970-Jan-28 19:21:30.747878]: print monitor shown
[1970-Jan-28 19:21:30.816779]: print monitor shown
[1970-Jan-28 19:21:38.940639]: FilePrintDialog::startPrintClicked()
[1970-Jan-28 19:21:39.320575]: PrintProcess state change: 1
[1970-Jan-28 19:21:39.899461]: print monitor shown
[1970-Jan-28 19:21:41.646455]: BotModel::stateNotification
[1970-Jan-28 19:21:41.747074]: built from filename
[1970-Jan-28 19:21:43.644531]: BotModel::stateNotification
[1970-Jan-28 19:21:43.717845]: PrintProcess state change: 6
[1970-Jan-28 19:21:43.912514]: print monitor shown
[1970-Jan-28 19:21:51.894772]: BotModel::stateNotification
[1970-Jan-28 19:21:51.981802]: Step change error: 80
[1970-Jan-28 19:21:51.983736]: PrintProcess state change: 15
[1970-Jan-28 19:21:52.061318]: print monitor shown
[1970-Jan-28 19:21:52.889720]: Setting error code
[1970-Jan-28 19:21:53.651430]: BotModel::stateNotification
[1970-Jan-28 19:21:53.728051]: Step change error: 80
[1970-Jan-28 19:21:53.729995]: PrintProcess state change: 29
[1970-Jan-28 19:21:53.749650]: print monitor shown
[1970-Jan-28 19:21:55.881556]: BotModel::stateNotification
[1970-Jan-28 19:21:55.962017]: Step change error: 80
[1970-Jan-28 19:21:55.964928]: PrintProcess state change: 28
[1970-Jan-28 19:22:01.579591]: print monitor shown
[1970-Jan-28 19:22:01.608304]: print monitor shown
[1970-Jan-28 19:22:01.616757]: print monitor shown
[1970-Jan-28 19:22:01.647455]: print monitor shown
[1970-Jan-28 19:22:03.222580]: BotModel::stateNotification
[1970-Jan-28 19:22:03.305496]: PrintProcess state change: 31
[1970-Jan-28 19:22:03.308315]: PrintProcess state change: 0
[1970-Jan-28 19:22:03.461444]: BotModel::stateNotification
[1970-Jan-28 19:22:11.145123]: BotModel::stateNotification
[1970-Jan-28 19:22:11.226511]: load standard step change: running
[1970-Jan-28 19:22:11.984778]: BotModel::stateNotification
[1970-Jan-28 19:22:12.072937]: load standard step change: preheating
[1970-Jan-28 19:24:50.359560]: BotModel::stateNotification
[1970-Jan-28 19:24:50.439166]: load standard step change: extrusion
[1970-Jan-28 19:24:59.356675]: Setting error code
[1970-Jan-28 19:25:00.890759]: BotModel::stateNotification
[1970-Jan-28 19:25:01.153612]: load standard step change: unloading_filament
[1970-Jan-28 19:25:18.705219]: BotModel::stateNotification
[1970-Jan-28 19:25:19.562361]: load standard step change: cancelling
[1970-Jan-28 19:25:19.566048]: BotModel::stateNotification
[1970-Jan-28 19:25:19.662040]: load standard step change: cleaning_up
[1970-Jan-28 19:25:19.664536]: BotModel::stateNotification
[1970-Jan-28 19:25:19.746153]: load standard step change: done
[1970-Jan-28 19:25:19.748006]: load filament cancelled
[1970-Jan-28 19:25:19.760617]: BotModel::stateNotification
[1970-Jan-28 19:25:42.661174]: BotModel::stateNotification
[1970-Jan-28 19:25:42.743449]: load standard step change: running
[1970-Jan-28 19:25:43.599291]: BotModel::stateNotification
[1970-Jan-28 19:25:43.681519]: load standard step change: preheating
[1970-Jan-28 19:25:44.730377]: BotModel::stateNotification
[1970-Jan-28 19:25:44.818437]: load standard step change: extrusion
[1970-Jan-28 19:26:29.414328]: BotModel::stateNotification
[1970-Jan-28 19:26:29.493365]: load standard step change: cancelling
[1970-Jan-28 19:26:29.729202]: BotModel::stateNotification
[1970-Jan-28 19:26:29.808569]: load standard step change: cleaning_up
[1970-Jan-28 19:26:30.384205]: BotModel::stateNotification
[1970-Jan-28 19:26:30.465960]: load standard step change: done
[1970-Jan-28 19:26:30.467824]: load filament cancelled
[1970-Jan-28 19:26:30.772438]: BotModel::stateNotification
[1970-Jan-28 19:26:34.140580]: BotModel::stateNotification
[1970-Jan-28 19:26:34.862626]: BotModel::stateNotification
[1970-Jan-28 19:26:35.148422]: BotModel::stateNotification
[1970-Jan-28 19:26:35.357200]: BotModel::stateNotification
[1970-Jan-28 19:26:41.055864]: FilePrintDialog::startPrintClicked()
[1970-Jan-28 19:26:41.559579]: PrintProcess state change: 1
[1970-Jan-28 19:26:42.170627]: print monitor shown
[1970-Jan-28 19:26:44.082641]: BotModel::stateNotification
[1970-Jan-28 19:26:44.182550]: built from filename
[1970-Jan-28 19:26:46.384105]: BotModel::stateNotification
[1970-Jan-28 19:26:46.458120]: PrintProcess state change: 8
[1970-Jan-28 19:26:46.665767]: print monitor shown
[1970-Jan-28 19:27:48.782727]: BotModel::stateNotification
[1970-Jan-28 19:27:48.863413]: PrintProcess state change: 9
[1970-Jan-28 19:27:48.945003]: print monitor shown
[1970-Jan-28 19:28:26.148583]: BotModel::stateNotification
[1970-Jan-28 19:28:26.228530]: PrintProcess state change: 10
[1970-Jan-28 19:28:26.279418]: print monitor shown
[1970-Jan-28 19:28:56.967277]: BotModel::stateNotification
[1970-Jan-28 19:28:57.042245]: PrintProcess state change: 7
[1970-Jan-28 19:28:57.121227]: print monitor shown
[1970-Jan-28 19:29:44.867937]: BotModel::stateNotification
[1970-Jan-28 19:29:44.953189]: PrintProcess state change: 13
[1970-Jan-28 19:29:44.996510]: print monitor shown
[1970-Jan-28 19:30:26.707765]: print monitor shown
[1970-Jan-28 19:30:30.459636]: BotModel::stateNotification
[1970-Jan-28 19:30:30.544201]: PrintProcess state change: 15
[1970-Jan-28 19:30:30.598495]: print monitor shown
[1970-Jan-28 19:30:32.929453]: BotModel::stateNotification
[1970-Jan-28 19:30:33.021788]: PrintProcess state change: 29
[1970-Jan-28 19:30:33.040588]: print monitor shown
[1970-Jan-28 19:30:44.501708]: BotModel::stateNotification
[1970-Jan-28 19:30:44.583151]: PrintProcess state change: 20
[1970-Jan-28 19:30:44.585809]: BasePanel not calling onEntry because not current: Unloading Filament (1/3)
[1970-Jan-28 19:31:14.227030]: BotModel::stateNotification
[1970-Jan-28 19:31:14.322724]: PrintProcess state change: 23
[1970-Jan-28 19:31:35.032825]: BotModel::stateNotification
[1970-Jan-28 19:31:35.185916]: PrintProcess state change: 29
[1970-Jan-28 19:31:35.738289]: print monitor shown
[1970-Jan-28 19:31:36.706251]: BotModel::stateNotification
[1970-Jan-28 19:31:36.788869]: PrintProcess state change: 31
[1970-Jan-28 19:31:36.806567]: print monitor shown
[1970-Jan-28 19:31:36.809428]: PrintProcess state change: 0
[1970-Jan-28 19:31:37.038059]: BotModel::stateNotification
[1970-Feb-04 16:19:16.817649]: PrintProcess state change: 1
[1970-Feb-04 16:19:17.499654]: print monitor shown
[1970-Feb-04 16:19:21.231373]: BotModel::stateNotification
[1970-Feb-04 16:19:21.334315]: built from filename
[1970-Feb-04 16:19:23.327571]: BotModel::stateNotification
[1970-Feb-04 16:19:23.408034]: PrintProcess state change: 6
[1970-Feb-04 16:19:23.602817]: print monitor shown
[1970-Feb-04 16:21:31.150446]: BotModel::stateNotification
[1970-Feb-04 16:21:31.219194]: PrintProcess state change: 9
[1970-Feb-04 16:21:31.297950]: print monitor shown
[1970-Feb-04 16:22:09.219366]: BotModel::stateNotification
[1970-Feb-04 16:22:09.301106]: PrintProcess state change: 10
[1970-Feb-04 16:22:09.348494]: print monitor shown
[1970-Feb-04 16:22:40.345942]: BotModel::stateNotification
[1970-Feb-04 16:22:40.431036]: PrintProcess state change: 7
[1970-Feb-04 16:22:40.499332]: print monitor shown
[1970-Feb-04 16:23:44.614374]: BotModel::stateNotification
[1970-Feb-04 16:23:44.684737]: PrintProcess state change: 13
[1970-Feb-04 16:23:44.728317]: print monitor shown
[1970-Feb-04 16:24:16.151094]: BotModel::stateNotification
[1970-Feb-04 16:24:16.226590]: PrintProcess state change: 17
[1970-Feb-04 16:24:16.377582]: print monitor shown
[1970-Feb-04 16:24:22.481992]: BotModel::stateNotification
[1970-Feb-04 16:24:22.564928]: PrintProcess state change: 19
[1970-Feb-04 16:24:22.581982]: print monitor shown
[1970-Feb-04 16:24:22.869330]: BotModel::stateNotification
[1970-Feb-04 16:24:22.956826]: PrintProcess state change: 11
[1970-Feb-04 16:24:23.059373]: print monitor shown
[1970-Feb-04 16:24:23.550746]: BotModel::stateNotification
[1970-Feb-04 16:24:23.628165]: PrintProcess state change: 19
[1970-Feb-04 16:24:23.668827]: print monitor shown
[1970-Feb-04 16:24:30.340594]: BotModel::stateNotification
[1970-Feb-04 16:24:30.420980]: PrintProcess state change: 13
[1970-Feb-04 16:24:30.442678]: print monitor shown
[1970-Feb-04 16:24:51.510584]: BotModel::stateNotification
[1970-Feb-04 16:24:51.587108]: PrintProcess state change: 16
[1970-Feb-04 16:24:51.805119]: print monitor shown
[1970-Feb-04 16:24:57.552398]: BotModel::stateNotification
[1970-Feb-04 16:24:57.622745]: PrintProcess state change: 18
[1970-Feb-04 16:25:17.831393]: print monitor shown
[1970-Feb-04 16:25:20.219501]: BotModel::stateNotification
[1970-Feb-04 16:25:20.307981]: PrintProcess state change: 15
[1970-Feb-04 16:25:20.371557]: print monitor shown
[1970-Feb-04 16:25:22.512499]: BotModel::stateNotification
[1970-Feb-04 16:25:22.587640]: PrintProcess state change: 29
[1970-Feb-04 16:25:22.607200]: print monitor shown
[1970-Feb-04 16:25:29.113935]: BotModel::stateNotification
[1970-Feb-04 16:25:29.184360]: PrintProcess state change: 20
[1970-Feb-04 16:25:29.200399]: BasePanel not calling onEntry because not current: Unloading Filament (1/3)
[1970-Feb-04 16:25:30.446982]: BotModel::stateNotification
[1970-Feb-04 16:25:30.532097]: PrintProcess state change: 23
[1970-Feb-04 16:25:49.333983]: BotModel::stateNotification
[1970-Feb-04 16:25:49.404601]: PrintProcess state change: 29
[1970-Feb-04 16:25:49.714988]: print monitor shown
[1970-Feb-04 16:25:50.311380]: BotModel::stateNotification
[1970-Feb-04 16:25:50.392512]: PrintProcess state change: 31
[1970-Feb-04 16:25:50.411210]: print monitor shown
[1970-Feb-04 16:25:50.414080]: PrintProcess state change: 0
[1970-Feb-04 16:25:50.691560]: BotModel::stateNotification
[1970-Feb-04 16:25:52.229497]: PrintProcess state change: 1
[1970-Feb-04 16:25:52.943523]: print monitor shown
[1970-Feb-04 16:25:54.703394]: BotModel::stateNotification
[1970-Feb-04 16:25:54.789136]: built from filename
[1970-Feb-04 16:25:56.320443]: BotModel::stateNotification
[1970-Feb-04 16:25:56.399049]: PrintProcess state change: 8
[1970-Feb-04 16:25:56.423120]: print monitor shown
[1970-Feb-04 16:26:28.577371]: BotModel::stateNotification
[1970-Feb-04 16:26:28.656169]: PrintProcess state change: 9
[1970-Feb-04 16:26:28.735456]: print monitor shown
[1970-Feb-04 16:27:05.537247]: BotModel::stateNotification
[1970-Feb-04 16:27:05.604302]: PrintProcess state change: 10
[1970-Feb-04 16:27:05.658439]: print monitor shown
[1970-Feb-04 16:27:36.902462]: BotModel::stateNotification
[1970-Feb-04 16:27:36.982762]: PrintProcess state change: 7
[1970-Feb-04 16:27:37.055802]: print monitor shown
[1970-Feb-04 16:28:24.159871]: BotModel::stateNotification
[1970-Feb-04 16:28:24.238205]: PrintProcess state change: 13
[1970-Feb-04 16:28:24.276317]: print monitor shown
[1970-Feb-04 16:28:36.710686]: BotModel::stateNotification
[1970-Feb-04 16:28:36.787117]: PrintProcess state change: 17
[1970-Feb-04 16:28:36.850975]: print monitor shown
[1970-Feb-04 16:28:44.437949]: BotModel::stateNotification
[1970-Feb-04 16:28:44.508909]: PrintProcess state change: 19
[1970-Feb-04 16:28:44.529426]: print monitor shown
[1970-Feb-04 16:28:44.846020]: BotModel::stateNotification
[1970-Feb-04 16:28:44.931484]: PrintProcess state change: 11
[1970-Feb-04 16:28:45.035969]: print monitor shown
[1970-Feb-04 16:28:45.784716]: BotModel::stateNotification
[1970-Feb-04 16:28:45.863698]: PrintProcess state change: 19
[1970-Feb-04 16:28:45.904105]: print monitor shown
[1970-Feb-04 16:28:53.027769]: BotModel::stateNotification
[1970-Feb-04 16:28:53.100997]: PrintProcess state change: 13
[1970-Feb-04 16:28:53.127097]: print monitor shown
[1970-Feb-04 16:29:21.829224]: BotModel::stateNotification
[1970-Feb-04 16:29:21.904224]: PrintProcess state change: 17
[1970-Feb-04 16:29:21.963628]: print monitor shown
[1970-Feb-04 16:29:28.616803]: BotModel::stateNotification
[1970-Feb-04 16:29:28.703260]: PrintProcess state change: 19
[1970-Feb-04 16:29:28.731410]: print monitor shown
[1970-Feb-04 16:29:29.412885]: BotModel::stateNotification
[1970-Feb-04 16:29:29.485972]: PrintProcess state change: 11
[1970-Feb-04 16:29:29.583193]: print monitor shown
[1970-Feb-04 16:29:33.947216]: print monitor shown
[1970-Feb-04 16:29:37.090742]: BotModel::stateNotification
[1970-Feb-04 16:29:37.159248]: PrintProcess state change: 15
[1970-Feb-04 16:29:37.263178]: print monitor shown
[1970-Feb-04 16:29:39.990549]: BotModel::stateNotification
[1970-Feb-04 16:29:40.058642]: PrintProcess state change: 29
[1970-Feb-04 16:29:40.078609]: print monitor shown
[1970-Feb-04 16:29:44.740724]: BotModel::stateNotification
[1970-Feb-04 16:29:44.820334]: PrintProcess state change: 20
[1970-Feb-04 16:29:44.822608]: BasePanel not calling onEntry because not current: Unloading Filament (1/3)
[1970-Feb-04 16:29:46.080541]: BotModel::stateNotification
[1970-Feb-04 16:29:46.158044]: PrintProcess state change: 23
[1970-Feb-04 16:30:06.183946]: BotModel::stateNotification
[1970-Feb-04 16:30:06.263535]: PrintProcess state change: 29
[1970-Feb-04 16:30:06.559615]: print monitor shown
[1970-Feb-04 16:30:06.861674]: BotModel::stateNotification
[1970-Feb-04 16:30:06.942454]: PrintProcess state change: 31
[1970-Feb-04 16:30:06.961171]: print monitor shown
[1970-Feb-04 16:30:06.964057]: PrintProcess state change: 0
[1970-Feb-04 16:30:07.208690]: BotModel::stateNotification
[1970-Feb-04 18:44:26.327269]: print monitor shown
[1970-Feb-04 18:44:26.346092]: print monitor shown
[1970-Feb-04 18:44:26.365133]: print monitor shown
[1970-Feb-04 18:44:26.383682]: print monitor shown
[1970-Feb-04 18:44:26.403014]: print monitor shown
[1970-Feb-04 18:44:26.421866]: print monitor shown
[1970-Feb-04 18:44:26.440409]: print monitor shown
[1970-Feb-04 18:44:26.449679]: print monitor shown
[1970-Feb-04 18:44:26.468284]: print monitor shown
[1970-Feb-04 18:44:26.486845]: print monitor shown
[1970-Feb-04 18:44:26.506239]: print monitor shown
[1970-Feb-04 18:44:26.525847]: print monitor shown
[1970-Feb-04 18:44:26.545010]: print monitor shown
[1970-Feb-04 18:44:26.563681]: print monitor shown
[1970-Feb-04 18:44:26.582310]: print monitor shown
[1970-Feb-04 18:44:26.600814]: print monitor shown
[1970-Feb-04 18:44:26.635602]: print monitor shown
[1970-Feb-04 18:44:26.769493]: print monitor shown
[1970-Feb-04 18:44:26.788215]: print monitor shown
[1970-Feb-04 18:44:26.821063]: print monitor shown
[1970-Feb-04 18:44:26.840786]: print monitor shown
[1970-Feb-04 18:44:26.849232]: print monitor shown
[1970-Feb-04 18:44:26.875346]: print monitor shown
[1970-Feb-04 18:44:26.894863]: print monitor shown
[1970-Feb-04 18:44:26.913627]: print monitor shown
[1970-Feb-04 18:44:26.932278]: print monitor shown
[1970-Feb-04 18:44:26.950900]: print monitor shown
[1970-Feb-04 18:44:26.973435]: print monitor shown
[1970-Feb-04 18:44:26.992023]: print monitor shown
[1970-Feb-04 18:44:27.008120]: print monitor shown
[1970-Feb-04 18:44:27.016736]: print monitor shown
[1970-Feb-04 18:44:27.046500]: print monitor shown
[1970-Feb-04 18:44:27.193420]: print monitor shown
[1970-Feb-04 18:44:27.210294]: print monitor shown
[1970-Feb-04 18:44:27.219238]: print monitor shown
[1970-Feb-04 18:44:27.237840]: print monitor shown
[1970-Feb-04 18:44:27.256471]: print monitor shown
[1970-Feb-04 18:44:27.277040]: print monitor shown
[1970-Feb-04 18:44:27.295400]: print monitor shown
[1970-Feb-04 18:44:27.313922]: print monitor shown
[1970-Feb-04 18:44:27.333191]: print monitor shown
[1970-Feb-04 18:44:37.050615]: BotModel::stateNotification
[1970-Feb-04 18:44:37.127750]: load standard step change: running
[1970-Feb-04 18:44:38.118877]: BotModel::stateNotification
[1970-Feb-04 18:44:38.197883]: load standard step change: preheating
[1970-Feb-04 18:47:30.378692]: BotModel::stateNotification
[1970-Feb-04 18:47:30.466206]: load standard step change: extrusion
[1970-Feb-04 18:47:53.567096]: BotModel::stateNotification
[1970-Feb-04 18:47:53.655193]: load standard step change: cancelling
[1970-Feb-04 18:47:53.876202]: BotModel::stateNotification
[1970-Feb-04 18:47:53.961472]: load standard step change: cleaning_up
[1970-Feb-04 18:47:54.737243]: BotModel::stateNotification
[1970-Feb-04 18:47:54.806823]: load standard step change: done
[1970-Feb-04 18:47:54.808693]: load filament cancelled
[1970-Feb-04 18:47:55.122355]: BotModel::stateNotification
[1970-Feb-04 18:48:47.379903]: BotModel::stateNotification
[1970-Feb-04 18:48:47.589441]: BotModel::stateNotification
[1970-Feb-04 18:48:47.819487]: BotModel::stateNotification
[1970-Feb-04 18:48:48.041385]: BotModel::stateNotification
[1970-Feb-04 18:49:07.508054]: FilePrintDialog::startPrintClicked()
[1970-Feb-04 18:49:08.054586]: PrintProcess state change: 1
[1970-Feb-04 18:49:08.634877]: print monitor shown
[1970-Feb-04 18:49:10.722911]: BotModel::stateNotification
[1970-Feb-04 18:49:10.814895]: built from filename
[1970-Feb-04 18:49:12.905300]: BotModel::stateNotification
[1970-Feb-04 18:49:12.977430]: PrintProcess state change: 8
[1970-Feb-04 18:49:13.169797]: print monitor shown
[1970-Feb-04 18:50:00.108221]: BotModel::stateNotification
[1970-Feb-04 18:50:00.177524]: PrintProcess state change: 9
[1970-Feb-04 18:50:00.263814]: print monitor shown
[1970-Feb-04 18:50:37.143412]: BotModel::stateNotification
[1970-Feb-04 18:50:37.304181]: PrintProcess state change: 10
[1970-Feb-04 18:50:37.444033]: print monitor shown
[1970-Feb-04 18:51:08.750382]: BotModel::stateNotification
[1970-Feb-04 18:51:08.827909]: PrintProcess state change: 7
[1970-Feb-04 18:51:08.906306]: print monitor shown
[1970-Feb-04 18:51:56.581268]: BotModel::stateNotification
[1970-Feb-04 18:51:56.663931]: PrintProcess state change: 13
[1970-Feb-04 18:51:56.702936]: print monitor shown
[1970-Feb-04 18:56:19.716484]: print monitor shown
[1970-Feb-04 18:56:23.538229]: BotModel::stateNotification
[1970-Feb-04 18:56:23.608169]: PrintProcess state change: 15
[1970-Feb-04 18:56:23.665812]: print monitor shown
[1970-Feb-04 18:56:26.388014]: BotModel::stateNotification
[1970-Feb-04 18:56:26.467833]: PrintProcess state change: 29
[1970-Feb-04 18:56:26.487749]: print monitor shown
[1970-Feb-04 18:56:35.806441]: BotModel::stateNotification
[1970-Feb-04 18:56:35.885898]: PrintProcess state change: 20
[1970-Feb-04 18:56:35.888147]: BasePanel not calling onEntry because not current: Unloading Filament (1/3)
[1970-Feb-04 18:56:58.697248]: BotModel::stateNotification
[1970-Feb-04 18:56:58.774185]: PrintProcess state change: 23
[1970-Feb-04 18:57:17.961542]: BotModel::stateNotification
[1970-Feb-04 18:57:18.045396]: PrintProcess state change: 29
[1970-Feb-04 18:57:18.346258]: print monitor shown
[1970-Feb-04 18:57:19.251509]: BotModel::stateNotification
[1970-Feb-04 18:57:19.327203]: PrintProcess state change: 31
[1970-Feb-04 18:57:19.348038]: print monitor shown
[1970-Feb-04 18:57:19.361050]: PrintProcess state change: 0
[1970-Feb-04 18:57:19.592213]: BotModel::stateNotification
[1970-Feb-09 18:59:42.904557]: print monitor shown
[1970-Feb-09 18:59:42.926084]: print monitor shown
[1970-Feb-09 18:59:42.945610]: print monitor shown
[1970-Feb-09 18:59:42.962793]: print monitor shown
[1970-Feb-09 18:59:42.981980]: print monitor shown
[1970-Feb-09 18:59:43.000685]: print monitor shown
[1970-Feb-09 18:59:43.020676]: print monitor shown
[1970-Feb-09 18:59:43.029601]: print monitor shown
[1970-Feb-09 18:59:43.048173]: print monitor shown
[1970-Feb-09 18:59:52.100347]: BotModel::stateNotification
[1970-Feb-09 18:59:52.186233]: load standard step change: running
[1970-Feb-09 18:59:53.076157]: BotModel::stateNotification
[1970-Feb-09 18:59:53.147933]: load standard step change: preheating
[1970-Feb-09 19:02:39.185827]: BotModel::stateNotification
[1970-Feb-09 19:02:39.273257]: load standard step change: extrusion
[1970-Feb-09 19:03:13.352462]: BotModel::stateNotification
[1970-Feb-09 19:03:13.432739]: load standard step change: cancelling
[1970-Feb-09 19:03:13.679920]: BotModel::stateNotification
[1970-Feb-09 19:03:13.749155]: load standard step change: cleaning_up
[1970-Feb-09 19:03:14.050961]: BotModel::stateNotification
[1970-Feb-09 19:03:14.132426]: load standard step change: done
[1970-Feb-09 19:03:14.134274]: load filament cancelled
[1970-Feb-09 19:03:14.444584]: BotModel::stateNotification
[1970-Feb-09 19:03:18.922869]: BotModel::stateNotification
[1970-Feb-09 19:03:19.163795]: BotModel::stateNotification
[1970-Feb-09 19:03:19.403797]: BotModel::stateNotification
[1970-Feb-09 19:03:19.657241]: BotModel::stateNotification
[1970-Feb-09 19:04:16.414361]: File info clicked
[1970-Feb-09 19:04:16.416203]: FileInfoDialog setContext: 0xca1b48
[1970-Feb-09 19:04:27.324684]: FilePrintDialog::startPrintClicked()
[1970-Feb-09 19:04:27.750804]: PrintProcess state change: 1
[1970-Feb-09 19:04:28.386638]: print monitor shown
[1970-Feb-09 19:04:31.675408]: BotModel::stateNotification
[1970-Feb-09 19:04:31.781740]: built from filename
[1970-Feb-09 19:04:36.352779]: BotModel::stateNotification
[1970-Feb-09 19:04:36.434857]: PrintProcess state change: 6
[1970-Feb-09 19:04:36.629981]: print monitor shown
[1970-Feb-09 19:04:58.227874]: BotModel::stateNotification
[1970-Feb-09 19:04:58.308558]: PrintProcess state change: 9
[1970-Feb-09 19:04:58.332610]: print monitor shown
[1970-Feb-09 19:05:00.509560]: print monitor shown
[1970-Feb-09 19:05:22.255047]: print monitor shown
[1970-Feb-09 19:05:34.899940]: BotModel::stateNotification
[1970-Feb-09 19:05:34.987419]: PrintProcess state change: 10
[1970-Feb-09 19:05:35.006958]: print monitor shown
[1970-Feb-09 19:06:05.068072]: BotModel::stateNotification
[1970-Feb-09 19:06:05.146340]: PrintProcess state change: 7
[1970-Feb-09 19:06:05.165949]: print monitor shown
[1970-Feb-09 19:07:10.547200]: BotModel::stateNotification
[1970-Feb-09 19:07:10.646769]: PrintProcess state change: 13
[1970-Feb-09 19:07:10.688235]: print monitor shown
[1970-Feb-09 19:09:50.198350]: BotModel::stateNotification
[1970-Feb-09 19:09:50.279354]: Step change error: 1041
[1970-Feb-09 19:09:50.289286]: PrintProcess state change: 16
[1970-Feb-09 19:09:50.349791]: print monitor shown
[1970-Feb-09 19:09:51.206411]: Setting error code
[1970-Feb-09 19:09:56.690915]: BotModel::stateNotification
[1970-Feb-09 19:09:56.772263]: Step change error: 1041
[1970-Feb-09 19:09:56.774099]: PrintProcess state change: 20
[1970-Feb-09 19:09:56.776468]: BasePanel not calling onEntry because not current: Unloading Filament (1/3)
[1970-Feb-09 19:09:58.107902]: BotModel::stateNotification
[1970-Feb-09 19:09:58.188636]: Step change error: 1041
[1970-Feb-09 19:09:58.201663]: PrintProcess state change: 23
[1970-Feb-09 19:10:17.099347]: BotModel::stateNotification
[1970-Feb-09 19:10:17.193000]: Step change error: 1041
[1970-Feb-09 19:10:17.195403]: PrintProcess state change: 18
[1970-Feb-09 19:10:23.608593]: BotModel::stateNotification
[1970-Feb-09 19:10:23.694825]: PrintProcess state change: 21
[1970-Feb-09 19:10:27.981196]: BotModel::stateNotification
[1970-Feb-09 19:10:28.062249]: PrintProcess state change: 22
[1970-Feb-09 19:11:20.002062]: BotModel::stateNotification
[1970-Feb-09 19:11:20.078550]: PrintProcess state change: 24
[1970-Feb-09 19:11:21.349845]: BotModel::stateNotification
[1970-Feb-09 19:11:21.429237]: PrintProcess state change: 18
[1970-Feb-09 19:11:26.452231]: BasePanel not calling onEntry because not current: Paused
[1970-Feb-09 19:11:26.522988]: print monitor shown
[1970-Feb-09 19:11:28.083009]: print monitor shown
[1970-Feb-09 19:11:34.429530]: BotModel::stateNotification
[1970-Feb-09 19:11:34.625885]: PrintProcess state change: 19
[1970-Feb-09 19:11:34.675967]: print monitor shown
[1970-Feb-09 19:11:35.713141]: BotModel::stateNotification
[1970-Feb-09 19:11:35.791693]: PrintProcess state change: 11
[1970-Feb-09 19:11:35.903370]: print monitor shown
[1970-Feb-09 19:11:36.622232]: BotModel::stateNotification
[1970-Feb-09 19:11:36.700830]: PrintProcess state change: 19
[1970-Feb-09 19:11:36.729746]: print monitor shown
[1970-Feb-09 19:11:37.522376]: BotModel::stateNotification
[1970-Feb-09 19:11:37.600656]: PrintProcess state change: 13
[1970-Feb-09 19:11:37.627448]: print monitor shown
[1970-Feb-09 19:20:26.895136]: print monitor shown
[1970-Feb-09 19:20:28.579189]: BotModel::stateNotification
[1970-Feb-09 19:20:28.657009]: PrintProcess state change: 16
[1970-Feb-09 19:20:28.715982]: print monitor shown
[1970-Feb-09 19:20:35.214581]: BotModel::stateNotification
[1970-Feb-09 19:20:35.291903]: PrintProcess state change: 18
[1970-Feb-09 19:22:36.124868]: BotModel::stateNotification
[1970-Feb-09 19:22:36.212821]: PrintProcess state change: 19
[1970-Feb-09 19:22:36.232778]: print monitor shown
[1970-Feb-09 19:22:36.570364]: BotModel::stateNotification
[1970-Feb-09 19:22:36.654560]: PrintProcess state change: 11
[1970-Feb-09 19:22:36.755058]: print monitor shown
[1970-Feb-09 19:22:38.403969]: BotModel::stateNotification
[1970-Feb-09 19:22:38.484741]: PrintProcess state change: 19
[1970-Feb-09 19:22:38.523518]: print monitor shown
[1970-Feb-09 19:22:40.985387]: BotModel::stateNotification
[1970-Feb-09 19:22:41.065159]: PrintProcess state change: 13
[1970-Feb-09 19:22:41.086430]: print monitor shown
[1970-Feb-09 19:28:14.245852]: BotModel::stateNotification
[1970-Feb-09 19:28:14.327459]: PrintProcess state change: 16
[1970-Feb-09 19:28:14.390819]: print monitor shown
[1970-Feb-09 19:28:18.262946]: BotModel::stateNotification
[1970-Feb-09 19:28:18.343336]: PrintProcess state change: 18
[1970-Feb-09 19:30:54.362070]: print monitor shown
[1970-Feb-09 19:30:57.741715]: BotModel::stateNotification
[1970-Feb-09 19:30:57.822292]: PrintProcess state change: 15
[1970-Feb-09 19:30:57.880902]: print monitor shown
[1970-Feb-09 19:31:01.177626]: BotModel::stateNotification
[1970-Feb-09 19:31:01.253449]: PrintProcess state change: 29
[1970-Feb-09 19:31:01.272198]: print monitor shown
[1970-Feb-09 19:31:04.183623]: BotModel::stateNotification
[1970-Feb-09 19:31:04.262779]: PrintProcess state change: 20
[1970-Feb-09 19:31:04.265125]: BasePanel not calling onEntry because not current: Unloading Filament (1/3)
[1970-Feb-09 19:31:43.920748]: BotModel::stateNotification
[1970-Feb-09 19:31:44.001301]: PrintProcess state change: 29
[1970-Feb-09 19:31:44.306037]: print monitor shown
[1970-Feb-09 19:31:44.321111]: BotModel::stateNotification
[1970-Feb-09 19:31:44.412013]: PrintProcess state change: 31
[1970-Feb-09 19:31:44.424538]: print monitor shown
[1970-Feb-09 19:31:44.427265]: PrintProcess state change: 0
[1970-Feb-09 19:31:44.665505]: BotModel::stateNotification
[1970-Feb-09 19:31:46.840827]: print monitor shown
[1970-Feb-09 19:31:46.863863]: print monitor shown
[1970-Feb-09 19:31:46.883224]: print monitor shown
[1970-Feb-09 19:31:46.898002]: print monitor shown
[1970-Feb-09 19:31:46.907245]: print monitor shown
[1970-Feb-09 19:31:46.925723]: print monitor shown
[1970-Feb-09 19:31:46.944657]: print monitor shown
[1970-Feb-09 19:31:46.967555]: print monitor shown
[1970-Feb-09 19:31:46.986401]: print monitor shown
[1970-Feb-09 19:31:47.001815]: print monitor shown
[1970-Feb-09 19:31:47.020493]: print monitor shown
[1970-Feb-09 19:31:47.029964]: print monitor shown
[1970-Feb-09 19:31:47.062006]: print monitor shown
[1970-Feb-09 19:31:47.080580]: print monitor shown
[1970-Feb-09 19:31:47.088931]: print monitor shown
[1970-Feb-09 19:31:47.105100]: print monitor shown
[1970-Feb-09 19:31:47.124897]: print monitor shown
[1970-Feb-09 19:31:47.143637]: print monitor shown
[1970-Feb-09 19:31:47.164923]: print monitor shown
[1970-Feb-09 19:31:47.183656]: print monitor shown
[1970-Feb-09 19:31:47.201393]: print monitor shown
[1970-Feb-09 19:31:56.675784]: FilePrintDialog::startPrintClicked()
[1970-Feb-09 19:31:57.268221]: PrintProcess state change: 1
[1970-Feb-09 19:31:57.979800]: print monitor shown
[1970-Feb-09 19:32:00.888828]: BotModel::stateNotification
[1970-Feb-09 19:32:00.986198]: built from filename
[1970-Feb-09 19:32:04.685319]: BotModel::stateNotification
[1970-Feb-09 19:32:04.770322]: PrintProcess state change: 8
[1970-Feb-09 19:32:04.958113]: print monitor shown
[1970-Feb-09 19:32:52.748532]: BotModel::stateNotification
[1970-Feb-09 19:32:52.817789]: PrintProcess state change: 9
[1970-Feb-09 19:32:52.898003]: print monitor shown
[1970-Feb-09 19:33:30.283873]: BotModel::stateNotification
[1970-Feb-09 19:33:30.349514]: PrintProcess state change: 10
[1970-Feb-09 19:33:30.422616]: print monitor shown
[1970-Feb-09 19:33:41.629085]: print monitor shown
[1970-Feb-09 19:34:01.314549]: BotModel::stateNotification
[1970-Feb-09 19:34:01.397862]: PrintProcess state change: 7
[1970-Feb-09 19:34:01.417331]: print monitor shown
[1970-Feb-09 19:34:13.589719]: print monitor shown
[1970-Feb-09 19:34:16.311489]: print monitor shown
[1970-Feb-09 19:34:22.292347]: print monitor shown
[1970-Feb-09 19:34:22.745302]: BotModel::stateNotification
[1970-Feb-09 19:34:22.827594]: PrintProcess state change: 15
[1970-Feb-09 19:34:22.901434]: print monitor shown
[1970-Feb-09 19:34:24.617619]: BotModel::stateNotification
[1970-Feb-09 19:34:24.694676]: PrintProcess state change: 29
[1970-Feb-09 19:34:24.761850]: print monitor shown
[1970-Feb-09 19:34:30.225165]: BotModel::stateNotification
[1970-Feb-09 19:34:30.309149]: PrintProcess state change: 20
[1970-Feb-09 19:34:30.311626]: BasePanel not calling onEntry because not current: Unloading Filament (1/3)
[1970-Feb-09 19:34:37.446558]: BotModel::stateNotification
[1970-Feb-09 19:34:37.531577]: PrintProcess state change: 29
[1970-Feb-09 19:34:37.972088]: print monitor shown
[1970-Feb-09 19:34:37.975750]: BotModel::stateNotification
[1970-Feb-09 19:34:38.079488]: PrintProcess state change: 31
[1970-Feb-09 19:34:38.108191]: print monitor shown
[1970-Feb-09 19:34:38.131336]: PrintProcess state change: 0
[1970-Feb-09 19:34:38.451084]: BotModel::stateNotification
[1970-Feb-09 19:34:39.971015]: print monitor shown
[1970-Feb-09 19:34:39.983877]: print monitor shown
[1970-Feb-09 19:34:40.002956]: print monitor shown
[1970-Feb-09 19:34:40.021485]: print monitor shown
[1970-Feb-09 19:34:40.044085]: print monitor shown
[1970-Feb-09 19:34:40.236731]: print monitor shown
[1970-Feb-09 19:34:40.265456]: print monitor shown
[1970-Feb-09 19:34:40.343228]: print monitor shown
[1970-Feb-09 19:34:51.029861]: BotModel::stateNotification
[1970-Feb-09 19:34:51.111330]: load standard step change: running
[1970-Feb-09 19:34:52.697804]: BotModel::stateNotification
[1970-Feb-09 19:34:52.784464]: load standard step change: preheating
[1970-Feb-09 19:35:16.306724]: BotModel::stateNotification
[1970-Feb-09 19:35:16.377500]: load standard step change: extrusion
[1970-Feb-09 19:35:27.317668]: BotModel::stateNotification
[1970-Feb-09 19:35:27.404654]: load standard step change: cancelling
[1970-Feb-09 19:35:27.715816]: BotModel::stateNotification
[1970-Feb-09 19:35:27.791950]: load standard step change: cleaning_up
[1970-Feb-09 19:35:28.341315]: BotModel::stateNotification
[1970-Feb-09 19:35:28.447357]: load standard step change: done
[1970-Feb-09 19:35:28.449204]: load filament cancelled
[1970-Feb-09 19:35:28.875239]: BotModel::stateNotification
[1970-Feb-09 19:35:31.376747]: BotModel::stateNotification
[1970-Feb-09 19:35:31.794521]: BotModel::stateNotification
[1970-Feb-09 19:35:32.169875]: BotModel::stateNotification
[1970-Feb-09 19:35:32.653745]: BotModel::stateNotification
[1970-Feb-09 19:35:35.411362]: FilePrintDialog::startPrintClicked()
[1970-Feb-09 19:35:35.867946]: PrintProcess state change: 1
[1970-Feb-09 19:35:36.802799]: print monitor shown
[1970-Feb-09 19:35:41.371203]: BotModel::stateNotification
[1970-Feb-09 19:35:41.463074]: built from filename
[1970-Feb-09 19:35:43.410501]: BotModel::stateNotification
[1970-Feb-09 19:35:43.454260]: PrintProcess state change: 8
[1970-Feb-09 19:35:43.549601]: print monitor shown
[1970-Feb-09 19:36:47.068761]: BotModel::stateNotification
[1970-Feb-09 19:36:47.143989]: PrintProcess state change: 9
[1970-Feb-09 19:36:47.221448]: print monitor shown
[1970-Feb-09 19:37:23.517302]: BotModel::stateNotification
[1970-Feb-09 19:37:23.600281]: PrintProcess state change: 10
[1970-Feb-09 19:37:23.647694]: print monitor shown
[1970-Feb-09 19:37:55.135874]: BotModel::stateNotification
[1970-Feb-09 19:37:55.213734]: PrintProcess state change: 7
[1970-Feb-09 19:37:55.286262]: print monitor shown
[1970-Feb-09 19:38:45.588006]: BotModel::stateNotification
[1970-Feb-09 19:38:45.668463]: PrintProcess state change: 13
[1970-Feb-09 19:38:45.708214]: print monitor shown
[1970-Feb-09 19:44:52.481377]: BotModel::stateNotification
[1970-Feb-09 19:44:52.561850]: PrintProcess state change: 16
[1970-Feb-09 19:44:52.611416]: print monitor shown
[1970-Feb-09 19:44:58.760206]: BotModel::stateNotification
[1970-Feb-09 19:44:58.828987]: PrintProcess state change: 18
[1970-Feb-09 19:45:51.502848]: print monitor shown
[1970-Feb-09 19:45:55.039330]: BotModel::stateNotification
[1970-Feb-09 19:45:55.116349]: PrintProcess state change: 15
[1970-Feb-09 19:45:55.175586]: print monitor shown
[1970-Feb-09 19:45:58.270413]: BotModel::stateNotification
[1970-Feb-09 19:45:58.347361]: PrintProcess state change: 29
[1970-Feb-09 19:45:58.366171]: print monitor shown
[1970-Feb-09 19:46:02.954322]: BotModel::stateNotification
[1970-Feb-09 19:46:03.033900]: PrintProcess state change: 20
[1970-Feb-09 19:46:03.036186]: BasePanel not calling onEntry because not current: Unloading Filament (1/3)
[1970-Feb-09 19:46:04.495024]: BotModel::stateNotification
[1970-Feb-09 19:46:04.575141]: PrintProcess state change: 23
[1970-Feb-09 19:46:23.560565]: BotModel::stateNotification
[1970-Feb-09 19:46:23.629926]: PrintProcess state change: 29
[1970-Feb-09 19:46:23.928728]: print monitor shown
[1970-Feb-09 19:46:24.508127]: BotModel::stateNotification
[1970-Feb-09 19:46:24.589302]: PrintProcess state change: 31
[1970-Feb-09 19:46:24.608046]: print monitor shown
[1970-Feb-09 19:46:24.621074]: PrintProcess state change: 0
[1970-Feb-09 19:46:24.865774]: BotModel::stateNotification
[1970-Feb-11 16:07:47.385223]: print monitor shown
[1970-Feb-11 16:07:47.404276]: print monitor shown
[1970-Feb-11 16:07:47.423536]: print monitor shown
[1970-Feb-11 16:07:47.442288]: print monitor shown
[1970-Feb-11 16:07:47.460985]: print monitor shown
[1970-Feb-11 16:07:47.477625]: print monitor shown
[1970-Feb-11 16:07:47.486062]: print monitor shown
[1970-Feb-11 16:07:47.507298]: print monitor shown
[1970-Feb-11 16:07:47.525948]: print monitor shown
[1970-Feb-11 16:07:47.545291]: print monitor shown
[1970-Feb-18 19:14:07.798939]: BotModel::stateNotification
[1970-Feb-18 19:14:08.400515]: BotModel::stateNotification
[1970-Feb-18 19:14:08.974289]: BotModel::stateNotification
[1970-Feb-18 19:14:09.553289]: BotModel::stateNotification
[1970-Sep-16 17:45:23.942347]: DeauthAccountsPanel::setAccountNum(2) stage: 0
[1970-Sep-16 17:46:43.972802]: DeauthAccountsPanel::setAccountNum(2) stage: 0