[1970-Jan-01 00:00:54.540455]: Log level: info
[1970-Jan-01 00:00:54.905915]: Initializing component: PrinterPanelController
[1970-Jan-01 00:00:55.134064]: Initializing component: PrinterPanelGui
[1970-Jan-01 00:01:14.370268]: Setting language to en
[1970-Jan-01 00:01:14.656875]: Loaded font :/resources/Antenna-Black.otf
[1970-Jan-01 00:01:14.659176]: Loaded families Antenna
[1970-Jan-01 00:01:14.822999]: Loaded font :/resources/Antenna-Bold.otf
[1970-Jan-01 00:01:14.824902]: Loaded families Antenna
[1970-Jan-01 00:01:15.013044]: Loaded font :/resources/Antenna-Regular.otf
[1970-Jan-01 00:01:15.015060]: Loaded families Antenna
[1970-Jan-01 00:01:15.212451]: Loaded font :/resources/Antenna-Medium.otf
[1970-Jan-01 00:01:15.214353]: Loaded families Antenna
[1970-Jan-01 00:01:25.046378]: (UDEV Monitor): Successfully created udev
[1970-Jan-01 00:01:37.949888]: DeauthAccountsPanel::setAccountNum(0) stage: 0
[1970-Jan-01 00:01:38.061061]: Language de requests antenna which is always ok
[1970-Jan-01 00:01:38.062930]: Language en requests antenna which is always ok
[1970-Jan-01 00:01:38.064742]: Language es requests antenna which is always ok
[1970-Jan-01 00:01:38.066691]: Language es_la requests antenna which is always ok
[1970-Jan-01 00:01:38.068533]: Language fr requests antenna which is always ok
[1970-Jan-01 00:01:38.070565]: Language it requests antenna which is always ok
[1970-Jan-01 00:01:38.072618]: Looking for fonts NotoSansCJKjp*
[1970-Jan-01 00:01:38.224334]: Found font type NotoSansCJKjp-Black
[1970-Jan-01 00:01:38.226401]: Found font type NotoSansCJKjp-Bold
[1970-Jan-01 00:01:38.228253]: Found font type NotoSansCJKjp-Medium
[1970-Jan-01 00:01:38.230327]: Found font type NotoSansCJKjp-Regular
[1970-Jan-01 00:01:38.232309]: Found font type NotoSansCJKjp-Black
[1970-Jan-01 00:01:38.234144]: Found font type NotoSansCJKjp-Bold
[1970-Jan-01 00:01:38.235988]: Found font type NotoSansCJKjp-Medium
[1970-Jan-01 00:01:38.237825]: Found font type NotoSansCJKjp-Regular
[1970-Jan-01 00:01:38.239853]: All font types found for ja
[1970-Jan-01 00:01:38.250842]: Looking for fonts NotoSansCJKkr*
[1970-Jan-01 00:01:38.348191]: Found font type NotoSansCJKkr-Black
[1970-Jan-01 00:01:38.350324]: Found font type NotoSansCJKkr-Bold
[1970-Jan-01 00:01:38.352230]: Found font type NotoSansCJKkr-Medium
[1970-Jan-01 00:01:38.354245]: Found font type NotoSansCJKkr-Regular
[1970-Jan-01 00:01:38.356113]: Found font type NotoSansCJKkr-Black
[1970-Jan-01 00:01:38.357980]: Found font type NotoSansCJKkr-Bold
[1970-Jan-01 00:01:38.360207]: Found font type NotoSansCJKkr-Medium
[1970-Jan-01 00:01:38.362103]: Found font type NotoSansCJKkr-Regular
[1970-Jan-01 00:01:38.363992]: All font types found for ko
[1970-Jan-01 00:01:38.366104]: Language pr requests antenna which is always ok
[1970-Jan-01 00:01:38.368135]: Looking for fonts NotoSansCJKsc*
[1970-Jan-01 00:01:38.462674]: Found font type NotoSansCJKsc-Black
[1970-Jan-01 00:01:38.464724]: Found font type NotoSansCJKsc-Bold
[1970-Jan-01 00:01:38.466604]: Found font type NotoSansCJKsc-Medium
[1970-Jan-01 00:01:38.469107]: Found font type NotoSansCJKsc-Regular
[1970-Jan-01 00:01:38.471270]: Found font type NotoSansCJKsc-Black
[1970-Jan-01 00:01:38.473152]: Found font type NotoSansCJKsc-Bold
[1970-Jan-01 00:01:38.475212]: Found font type NotoSansCJKsc-Medium
[1970-Jan-01 00:01:38.477073]: Found font type NotoSansCJKsc-Regular
[1970-Jan-01 00:01:38.478974]: All font types found for zh
[1970-Jan-01 00:01:38.483260]: Available langs:  de en es es_la fr it ja ko pr zh
[1970-Jan-01 00:01:39.697073]: loading status icon height 40 width 14
[1970-Jan-01 00:01:39.699861]: Loaded initial menu item
[1970-Jan-01 00:01:39.853903]: Done loading menu items
[1970-Jan-01 00:02:01.442493]: BasePanel not calling onEntry because not current: Get Started
[1970-Jan-01 00:02:04.317877]: Starting component: PrinterPanelController
[1970-Jan-01 00:02:04.323223]: Starting component: PrinterPanelGui
[1970-Jan-01 00:02:04.372147]: Connecting via socket: /tmp/kaiten.socket
[1970-Jan-01 00:02:04.473246]: Registering printerpanel RPC method: allow_unknown_firmware
[1970-Jan-01 00:02:04.494417]: Registering printerpanel RPC method: authorize_user
[1970-Jan-01 00:02:04.496499]: Registering printerpanel RPC method: error_acknowledged
[1970-Jan-01 00:02:04.498383]: Registering printerpanel RPC method: error_notification
[1970-Jan-01 00:02:04.509229]: Registering printerpanel RPC method: extruder_change
[1970-Jan-01 00:02:04.511486]: Registering printerpanel RPC method: firware_updates_info_change
[1970-Jan-01 00:02:04.513238]: Registering printerpanel RPC method: font_notification
[1970-Jan-01 00:02:04.516078]: Registering printerpanel RPC method: network_state_change
[1970-Jan-01 00:02:04.517845]: Registering printerpanel RPC method: print_file_valid
[1970-Jan-01 00:02:04.519590]: Registering printerpanel RPC method: request_user_input
[1970-Jan-01 00:02:04.531688]: Registering printerpanel RPC method: reset_to_factory
[1970-Jan-01 00:02:04.533455]: Registering printerpanel RPC method: start_diagnostics
[1970-Jan-01 00:02:04.535195]: Registering printerpanel RPC method: state_notification
[1970-Jan-01 00:02:04.537052]: Registering printerpanel RPC method: system_notification
[1970-Jan-01 00:02:04.559874]: Connected!

[1970-Jan-01 00:02:11.935414]: DeauthAccountsPanel::setAccountNum(0) stage: 0
[1970-Jan-01 00:02:12.328140]: Connected Kaiten has version 2.6.2.734
[1970-Jan-01 00:02:12.380668]: DeauthAccountsPanel::setAccountNum(0) stage: 0
[1970-Jan-01 00:02:12.581696]: Move to main screen in splashdone
[1970-Jan-01 00:02:12.754983]: BotModel::stateNotification
[1970-Jan-01 01:25:11.468741]: BotModel::stateNotification
[1970-Jan-01 01:25:11.567357]: load standard step change: running
[1970-Jan-01 01:25:11.661147]: BotModel::stateNotification
[1970-Jan-01 01:25:12.852661]: load standard step change: preheating
[1970-Jan-01 01:28:05.570308]: BotModel::stateNotification
[1970-Jan-01 01:28:05.635414]: load standard step change: extrusion
[1970-Jan-01 01:28:54.218873]: BotModel::stateNotification
[1970-Jan-01 01:28:54.296855]: load standard step change: cancelling
[1970-Jan-01 01:28:56.072016]: BotModel::stateNotification
[1970-Jan-01 01:28:56.154430]: load standard step change: cleaning_up
[1970-Jan-01 01:28:56.987061]: BotModel::stateNotification
[1970-Jan-01 01:28:57.067965]: load standard step change: done
[1970-Jan-01 01:28:57.069933]: load filament cancelled
[1970-Jan-01 01:28:57.192015]: BotModel::stateNotification
[1970-Jan-01 01:28:59.368345]: BotModel::stateNotification
[1970-Jan-01 01:28:59.504389]: BotModel::stateNotification
[1970-Jan-01 01:29:01.752940]: BotModel::stateNotification
[1970-Jan-01 01:29:18.987956]: BotModel::stateNotification
[1970-Jan-01 01:29:19.356964]: BotModel::stateNotification
[1970-Jan-01 01:29:19.802577]: BotModel::stateNotification
[1970-Jan-01 01:29:21.923282]:  UnloadFilamentProcess::continueProcess: No active process to continue
[1970-Jan-01 01:29:24.484756]: BotModel::stateNotification
[1970-Jan-01 01:29:24.569752]: load standard step change: running
[1970-Jan-01 01:29:24.590393]: BotModel::stateNotification
[1970-Jan-01 01:29:25.770687]: load standard step change: preheating
[1970-Jan-01 01:29:26.888727]: BotModel::stateNotification
[1970-Jan-01 01:29:26.974912]: load standard step change: extrusion
[1970-Jan-01 01:30:19.688622]: BotModel::stateNotification
[1970-Jan-01 01:30:19.776125]: load standard step change: cleaning_up
[1970-Jan-01 01:30:20.160393]: BotModel::stateNotification
[1970-Jan-01 01:30:20.227974]: load standard step change: done
[1970-Jan-01 01:30:20.229927]: load filament completed
[1970-Jan-01 01:30:20.332842]: BotModel::stateNotification
[1970-Jan-01 01:30:23.594652]: BotModel::stateNotification
[1970-Jan-01 01:30:23.675374]: load standard step change: running
[1970-Jan-01 01:30:23.774694]: BotModel::stateNotification
[1970-Jan-01 01:30:24.958158]: load standard step change: preheating
[1970-Jan-01 01:30:26.916350]: BotModel::stateNotification
[1970-Jan-01 01:30:27.008065]: load standard step change: extrusion
[1970-Jan-01 01:30:34.521633]: BotModel::stateNotification
[1970-Jan-01 01:30:36.110825]: load standard step change: cancelling
[1970-Jan-01 01:30:36.210420]: BotModel::stateNotification
[1970-Jan-01 01:30:36.291741]: load standard step change: cleaning_up
[1970-Jan-01 01:30:36.812436]: BotModel::stateNotification
[1970-Jan-01 01:30:36.888222]: load standard step change: done
[1970-Jan-01 01:30:36.905613]: load filament cancelled
[1970-Jan-01 01:30:37.511125]: BotModel::stateNotification
[1970-Jan-01 01:30:41.203823]: BotModel::stateNotification
[1970-Jan-01 01:30:41.279344]: load standard step change: running
[1970-Jan-01 01:30:42.486721]: BotModel::stateNotification
[1970-Jan-01 01:30:42.558502]: load standard step change: preheating
[1970-Jan-01 01:30:43.722605]: BotModel::stateNotification
[1970-Jan-01 01:30:43.764375]: load standard step change: extrusion
[1970-Jan-01 01:30:51.281948]: BotModel::stateNotification
[1970-Jan-01 01:30:52.879945]: load standard step change: cancelling
[1970-Jan-01 01:30:52.980424]: BotModel::stateNotification
[1970-Jan-01 01:30:53.057401]: load standard step change: cleaning_up
[1970-Jan-01 01:30:53.514300]: BotModel::stateNotification
[1970-Jan-01 01:30:53.594804]: load standard step change: done
[1970-Jan-01 01:30:53.596742]: load filament cancelled
[1970-Jan-01 01:30:53.691217]: BotModel::stateNotification
[1970-Jan-01 01:31:43.543432]: BotModel::stateNotification
[1970-Jan-01 01:31:43.628881]: load standard step change: running
[1970-Jan-01 01:31:43.664417]: BotModel::stateNotification
[1970-Jan-01 01:31:44.851188]: load standard step change: preheating
[1970-Jan-01 01:32:25.666020]: BotModel::stateNotification
[1970-Jan-01 01:32:25.722658]: load standard step change: extrusion
[1970-Jan-01 01:33:18.249188]: BotModel::stateNotification
[1970-Jan-01 01:33:18.340769]: load standard step change: cleaning_up
[1970-Jan-01 01:33:18.576332]: BotModel::stateNotification
[1970-Jan-01 01:33:18.663742]: load standard step change: done
[1970-Jan-01 01:33:18.665714]: load filament completed
[1970-Jan-01 01:33:18.703636]: BotModel::stateNotification
[1970-Jan-01 01:35:01.953669]: BotModel::stateNotification
[1970-Jan-01 01:35:02.136800]: load standard step change: running
[1970-Jan-01 01:35:03.537305]: BotModel::stateNotification
[1970-Jan-01 01:35:03.615424]: load standard step change: preheating
[1970-Jan-01 01:35:04.816301]: BotModel::stateNotification
[1970-Jan-01 01:35:04.856819]: load standard step change: extrusion
[1970-Jan-01 01:35:33.172185]: BotModel::stateNotification
[1970-Jan-01 01:35:33.180619]: load standard step change: cancelling
[1970-Jan-01 01:35:35.512676]: Setting error code
[1970-Jan-01 01:35:35.809309]: BotModel::stateNotification
[1970-Jan-01 01:35:35.815226]: load standard step change: cleaning_up
[1970-Jan-01 01:35:35.822329]: BotModel::stateNotification
[1970-Jan-01 01:35:35.829115]: load standard step change: done
[1970-Jan-01 01:35:35.831335]: load filament cancelled
[1970-Jan-01 01:35:36.145984]: BotModel::stateNotification
[1970-Jan-01 01:36:34.935732]: ChangeExtruderProcess: Transitioned to state: 2
[1970-Jan-01 01:36:35.594280]: BotModel::stateNotification
[1970-Jan-01 01:36:35.782492]: BotModel::stateNotification
[1970-Jan-01 01:36:35.808788]: BotModel::stateNotification
[1970-Jan-01 01:36:35.835194]: BotModel::stateNotification
[1970-Jan-01 01:36:38.748461]: BotModel::stateNotification
[1970-Jan-01 01:36:38.756693]: ChangeExtruderProcess: Transitioned to state: 3
[1970-Jan-01 01:36:40.991504]: BotModel::stateNotification
[1970-Jan-01 01:36:41.073723]: BotModel::stateNotification
[1970-Jan-01 01:36:41.114314]: ChangeExtruderProcess: Transitioned to state: 4
[1970-Jan-01 01:36:41.373835]: BotModel::stateNotification
[1970-Jan-01 01:36:43.719980]: ChangeExtruderProcess: Transitioned to state: 0
[1970-Jan-01 01:36:46.477664]: BotModel::stateNotification
[1970-Jan-01 01:36:46.564563]: load standard step change: running
[1970-Jan-01 01:36:46.609130]: BotModel::stateNotification
[1970-Jan-01 01:36:46.679843]: load standard step change: preheating
[1970-Jan-01 01:37:51.893842]: BotModel::stateNotification
[1970-Jan-01 01:37:51.943854]: load standard step change: extrusion
[1970-Jan-01 01:38:44.743518]: BotModel::stateNotification
[1970-Jan-01 01:38:44.822807]: load standard step change: cleaning_up
[1970-Jan-01 01:38:45.376334]: BotModel::stateNotification
[1970-Jan-01 01:38:45.447755]: load standard step change: done
[1970-Jan-01 01:38:45.461201]: load filament completed
[1970-Jan-01 01:38:45.677854]: BotModel::stateNotification
[1970-Jan-01 01:39:26.828075]: BotModel::stateNotification
[1970-Jan-01 01:39:26.911943]: load standard step change: running
[1970-Jan-01 01:39:26.973359]: BotModel::stateNotification
[1970-Jan-01 01:39:27.050831]: load standard step change: preheating
[1970-Jan-01 01:40:18.215445]: BotModel::stateNotification
[1970-Jan-01 01:40:18.272777]: load standard step change: extrusion
[1970-Jan-01 01:40:32.987594]: BotModel::stateNotification
[1970-Jan-01 01:40:33.084970]: load standard step change: cancelling
[1970-Jan-01 01:40:33.145471]: BotModel::stateNotification
[1970-Jan-01 01:40:33.226966]: load standard step change: cleaning_up
[1970-Jan-01 01:40:33.675485]: BotModel::stateNotification
[1970-Jan-01 01:40:33.764109]: load standard step change: done
[1970-Jan-01 01:40:33.766175]: load filament cancelled
[1970-Jan-01 01:40:34.116930]: BotModel::stateNotification
[1970-Jan-01 01:40:37.200598]: BotModel::stateNotification
[1970-Jan-01 01:40:37.328128]: BotModel::stateNotification
[1970-Jan-01 01:40:37.617209]: BotModel::stateNotification
[1970-Jan-01 01:40:37.692305]: BotModel::stateNotification
[1970-Jan-01 01:40:39.976411]: BotModel::stateNotification
[1970-Jan-01 01:40:41.334750]: BotModel::stateNotification
[1970-Jan-01 01:40:42.388933]: BotModel::stateNotification
[1970-Jan-01 01:40:59.618461]: BotModel::stateNotification
[1970-Jan-01 01:41:01.462464]: Setting error code
[1970-Jan-01 01:41:01.723909]: BotModel::stateNotification
[1970-Jan-01 01:41:01.892163]: BotModel::stateNotification
[1970-Jan-01 01:42:02.251002]: ChangeExtruderProcess: Transitioned to state: 2
[1970-Jan-01 01:42:02.934461]: BotModel::stateNotification
[1970-Jan-01 01:42:03.078997]: BotModel::stateNotification
[1970-Jan-01 01:42:03.122467]: BotModel::stateNotification
[1970-Jan-01 01:42:03.153538]: BotModel::stateNotification
[1970-Jan-01 01:42:04.325120]: BotModel::stateNotification
[1970-Jan-01 01:42:04.336828]: ChangeExtruderProcess: Transitioned to state: 3
[1970-Jan-01 01:42:06.257443]: BotModel::stateNotification
[1970-Jan-01 01:42:06.450265]: BotModel::stateNotification
[1970-Jan-01 01:42:06.521994]: ChangeExtruderProcess: Transitioned to state: 4
[1970-Jan-01 01:42:06.618601]: BotModel::stateNotification
[1970-Jan-01 01:42:08.017148]: ChangeExtruderProcess: Transitioned to state: 0
[1970-Jan-01 01:42:09.225299]:  UnloadFilamentProcess::continueProcess: No active process to continue
[1970-Jan-01 01:42:12.387441]: BotModel::stateNotification
[1970-Jan-01 01:42:13.646605]: BotModel::stateNotification
[1970-Jan-01 01:43:10.458295]: BotModel::stateNotification
[1970-Jan-01 01:43:27.704715]: BotModel::stateNotification
[1970-Jan-01 01:43:28.016178]: BotModel::stateNotification
[1970-Jan-01 01:43:28.620472]: BotModel::stateNotification
[1970-Jan-01 01:43:31.228060]:  UnloadFilamentProcess::continueProcess: No active process to continue
[1970-Jan-01 01:43:34.331849]: BotModel::stateNotification
[1970-Jan-01 01:43:35.528269]: load standard step change: running
[1970-Jan-01 01:43:35.615505]: BotModel::stateNotification
[1970-Jan-01 01:43:35.697592]: load standard step change: preheating
[1970-Jan-01 01:43:36.689973]: BotModel::stateNotification
[1970-Jan-01 01:43:36.733701]: load standard step change: extrusion
[1970-Jan-01 01:44:28.843201]: BotModel::stateNotification
[1970-Jan-01 01:44:28.917555]: load standard step change: cleaning_up
[1970-Jan-01 01:44:29.662194]: BotModel::stateNotification
[1970-Jan-01 01:44:29.723414]: load standard step change: done
[1970-Jan-01 01:44:29.725342]: load filament completed
[1970-Jan-01 01:44:29.758504]: BotModel::stateNotification
[1970-Jan-01 01:44:36.639893]: BotModel::stateNotification
[1970-Jan-01 01:44:36.789221]: BotModel::stateNotification
[1970-Jan-01 01:44:39.131696]: BotModel::stateNotification
[1970-Jan-01 01:44:56.486703]: BotModel::stateNotification
[1970-Jan-01 01:44:56.809856]: BotModel::stateNotification
[1970-Jan-01 01:44:57.105476]: BotModel::stateNotification
[1970-Jan-01 01:44:58.083344]:  UnloadFilamentProcess::continueProcess: No active process to continue
[1970-Jan-01 01:44:59.251063]: BotModel::stateNotification
[1970-Jan-01 01:44:59.327380]: load standard step change: running
[1970-Jan-01 01:45:00.552600]: BotModel::stateNotification
[1970-Jan-01 01:45:00.638332]: load standard step change: preheating
[1970-Jan-01 01:45:01.775347]: BotModel::stateNotification
[1970-Jan-01 01:45:01.864158]: load standard step change: extrusion
[1970-Jan-01 01:45:54.243733]: BotModel::stateNotification
[1970-Jan-01 01:45:54.332042]: load standard step change: cleaning_up
[1970-Jan-01 01:45:54.469375]: BotModel::stateNotification
[1970-Jan-01 01:45:54.559381]: load standard step change: done
[1970-Jan-01 01:45:54.561624]: load filament completed
[1970-Jan-01 01:45:54.656801]: BotModel::stateNotification
[1970-Jan-01 01:45:56.103031]: BotModel::stateNotification
[1970-Jan-01 01:45:56.178232]: load standard step change: running
[1970-Jan-01 01:45:57.527069]: BotModel::stateNotification
[1970-Jan-01 01:45:57.609448]: load standard step change: preheating
[1970-Jan-01 01:45:58.683779]: BotModel::stateNotification
[1970-Jan-01 01:45:58.734079]: load standard step change: extrusion
[1970-Jan-01 01:46:50.960492]: BotModel::stateNotification
[1970-Jan-01 01:46:51.035789]: load standard step change: cleaning_up
[1970-Jan-01 01:46:51.252396]: BotModel::stateNotification
[1970-Jan-01 01:46:51.342759]: load standard step change: done
[1970-Jan-01 01:46:51.345193]: load filament completed
[1970-Jan-01 01:46:51.414094]: BotModel::stateNotification
[1970-Jan-01 01:46:56.667966]: BotModel::stateNotification
[1970-Jan-01 01:46:56.749369]: load standard step change: running
[1970-Jan-01 01:46:56.815021]: BotModel::stateNotification
[1970-Jan-01 01:46:56.896425]: load standard step change: preheating
[1970-Jan-01 01:46:59.114260]: BotModel::stateNotification
[1970-Jan-01 01:46:59.175151]: load standard step change: extrusion
[1970-Jan-01 01:47:07.380339]: Setting error code
[1970-Jan-01 01:47:07.797448]: BotModel::stateNotification
[1970-Jan-01 01:47:08.134722]: load standard step change: unloading_filament
[1970-Jan-01 01:47:27.569135]: BotModel::stateNotification
[1970-Jan-01 01:47:29.011479]: load standard step change: cancelling
[1970-Jan-01 01:47:29.015425]: BotModel::stateNotification
[1970-Jan-01 01:47:29.054783]: load standard step change: cleaning_up
[1970-Jan-01 01:47:29.057491]: BotModel::stateNotification
[1970-Jan-01 01:47:29.096383]: load standard step change: done
[1970-Jan-01 01:47:29.098330]: load filament cancelled
[1970-Jan-01 01:47:29.101083]: BotModel::stateNotification
[1970-Jan-01 01:47:29.648236]: BotModel::stateNotification
[1970-Jan-01 01:47:29.727728]: load standard step change: running
[1970-Jan-01 01:47:29.857376]: BotModel::stateNotification
[1970-Jan-01 01:47:31.117117]: load standard step change: preheating
[1970-Jan-01 01:47:33.098981]: BotModel::stateNotification
[1970-Jan-01 01:47:33.177702]: load standard step change: extrusion
[1970-Jan-01 01:48:00.572354]: BotModel::stateNotification
[1970-Jan-01 01:48:00.650558]: load standard step change: cancelling
[1970-Jan-01 01:48:00.733786]: BotModel::stateNotification
[1970-Jan-01 01:48:00.814964]: load standard step change: cleaning_up
[1970-Jan-01 01:48:01.323275]: BotModel::stateNotification
[1970-Jan-01 01:48:01.410289]: load standard step change: done
[1970-Jan-01 01:48:01.412269]: load filament cancelled
[1970-Jan-01 01:48:01.493242]: BotModel::stateNotification
[1970-Jan-01 01:48:14.956187]: BotModel::stateNotification
[1970-Jan-01 01:48:15.045266]: load standard step change: running
[1970-Jan-01 01:48:15.097013]: BotModel::stateNotification
[1970-Jan-01 01:48:16.280425]: load standard step change: preheating
[1970-Jan-01 01:48:19.709283]: BotModel::stateNotification
[1970-Jan-01 01:48:19.779558]: load standard step change: extrusion
[1970-Jan-01 01:48:46.549927]: BotModel::stateNotification
[1970-Jan-01 01:48:46.633246]: load standard step change: cancelling
[1970-Jan-01 01:48:48.370576]: BotModel::stateNotification
[1970-Jan-01 01:48:48.446073]: load standard step change: cleaning_up
[1970-Jan-01 01:48:49.305111]: BotModel::stateNotification
[1970-Jan-01 01:48:49.379308]: load standard step change: done
[1970-Jan-01 01:48:49.391731]: load filament cancelled
[1970-Jan-01 01:48:49.526538]: BotModel::stateNotification
[1970-Jan-01 01:48:53.334916]: BotModel::stateNotification
[1970-Jan-01 01:48:53.411639]: load standard step change: running
[1970-Jan-01 01:48:53.491505]: BotModel::stateNotification
[1970-Jan-01 01:48:54.762518]: load standard step change: preheating
[1970-Jan-01 01:48:56.268234]: BotModel::stateNotification
[1970-Jan-01 01:48:56.315898]: load standard step change: extrusion
[1970-Jan-01 01:49:11.503197]: Setting error code
[1970-Jan-01 01:49:11.673863]: BotModel::stateNotification
[1970-Jan-01 01:49:11.872005]: load standard step change: unloading_filament
[1970-Jan-01 01:49:21.767095]: BotModel::stateNotification
[1970-Jan-01 01:49:23.748993]: load standard step change: cancelling
[1970-Jan-01 01:49:24.456192]: Setting error code
[1970-Jan-01 01:49:24.606308]: BotModel::stateNotification
[1970-Jan-01 01:49:24.613783]: load standard step change: cleaning_up
[1970-Jan-01 01:49:24.621463]: BotModel::stateNotification
[1970-Jan-01 01:49:24.627428]: load standard step change: done
[1970-Jan-01 01:49:24.629516]: load filament cancelled
[1970-Jan-01 01:49:24.633008]: BotModel::stateNotification
[1970-Jan-01 01:50:57.768810]: ChangeExtruderProcess: Transitioned to state: 2
[1970-Jan-01 01:50:58.495690]: BotModel::stateNotification
[1970-Jan-01 01:50:58.574399]: BotModel::stateNotification
[1970-Jan-01 01:50:58.609882]: BotModel::stateNotification
[1970-Jan-01 01:50:58.645230]: BotModel::stateNotification
[1970-Jan-01 01:51:01.662839]: BotModel::stateNotification
[1970-Jan-01 01:51:01.674569]: ChangeExtruderProcess: Transitioned to state: 3
[1970-Jan-01 01:51:03.569314]: BotModel::stateNotification
[1970-Jan-01 01:51:03.875956]: BotModel::stateNotification
[1970-Jan-01 01:51:03.957322]: ChangeExtruderProcess: Transitioned to state: 4
[1970-Jan-01 01:51:04.153426]: BotModel::stateNotification
[1970-Jan-01 01:51:08.346238]: ChangeExtruderProcess: Transitioned to state: 0
[1970-Jan-01 01:51:25.032055]: BotModel::stateNotification
[1970-Jan-01 01:51:25.097760]: load standard step change: running
[1970-Jan-01 01:51:26.311314]: BotModel::stateNotification
[1970-Jan-01 01:51:26.391651]: load standard step change: preheating
[1970-Jan-01 01:52:45.888203]: BotModel::stateNotification
[1970-Jan-01 01:52:45.933025]: load standard step change: extrusion
[1970-Jan-01 01:52:50.195510]: Setting error code
[1970-Jan-01 01:52:50.437571]: BotModel::stateNotification
[1970-Jan-01 01:52:50.533452]: load standard step change: unloading_filament
[1970-Jan-01 01:53:10.355796]: BotModel::stateNotification
[1970-Jan-01 01:53:11.042891]: load standard step change: cancelling
[1970-Jan-01 01:53:11.046825]: BotModel::stateNotification
[1970-Jan-01 01:53:11.127937]: load standard step change: cleaning_up
[1970-Jan-01 01:53:11.231807]: BotModel::stateNotification
[1970-Jan-01 01:53:11.295534]: load standard step change: done
[1970-Jan-01 01:53:11.297780]: load filament cancelled
[1970-Jan-01 01:53:11.300591]: BotModel::stateNotification
[1970-Jan-01 01:53:12.366294]: BotModel::stateNotification
[1970-Jan-01 01:53:12.436764]: load standard step change: running
[1970-Jan-01 01:53:13.616564]: BotModel::stateNotification
[1970-Jan-01 01:53:13.712640]: load standard step change: preheating
[1970-Jan-01 01:53:14.922802]: BotModel::stateNotification
[1970-Jan-01 01:53:15.010556]: load standard step change: extrusion
[1970-Jan-01 01:54:07.970913]: BotModel::stateNotification
[1970-Jan-01 01:54:08.043230]: load standard step change: cleaning_up
[1970-Jan-01 01:54:08.183963]: BotModel::stateNotification
[1970-Jan-01 01:54:08.264343]: load standard step change: done
[1970-Jan-01 01:54:08.266851]: load filament completed
[1970-Jan-01 01:54:08.363073]: BotModel::stateNotification
[1970-Jan-01 01:54:29.019632]: BotModel::stateNotification
[1970-Jan-01 01:54:30.202622]: load standard step change: running
[1970-Jan-01 01:54:30.267653]: BotModel::stateNotification
[1970-Jan-01 01:54:30.344683]: load standard step change: preheating
[1970-Jan-01 01:54:31.343810]: BotModel::stateNotification
[1970-Jan-01 01:54:31.391475]: load standard step change: extrusion
[1970-Jan-01 01:55:24.010629]: BotModel::stateNotification
[1970-Jan-01 01:55:24.089543]: load standard step change: cleaning_up
[1970-Jan-01 01:55:24.492166]: BotModel::stateNotification
[1970-Jan-01 01:55:24.575145]: load standard step change: done
[1970-Jan-01 01:55:24.577241]: load filament completed
[1970-Jan-01 01:55:24.650798]: BotModel::stateNotification
[1970-Jan-01 01:55:30.915800]: BotModel::stateNotification
[1970-Jan-01 01:55:32.105965]: load standard step change: running
[1970-Jan-01 01:55:32.180645]: BotModel::stateNotification
[1970-Jan-01 01:55:32.262146]: load standard step change: preheating
[1970-Jan-01 01:55:33.217773]: BotModel::stateNotification
[1970-Jan-01 01:55:33.295097]: load standard step change: extrusion
[1970-Jan-01 01:55:58.068268]: Setting error code
[1970-Jan-01 01:55:58.242206]: BotModel::stateNotification
[1970-Jan-01 01:55:58.503092]: load standard step change: unloading_filament
[1970-Jan-01 01:56:18.067832]: BotModel::stateNotification
[1970-Jan-01 01:56:19.384335]: load standard step change: cancelling
[1970-Jan-01 01:56:19.427791]: BotModel::stateNotification
[1970-Jan-01 01:56:19.466659]: load standard step change: cleaning_up
[1970-Jan-01 01:56:19.469484]: BotModel::stateNotification
[1970-Jan-01 01:56:19.510242]: load standard step change: done
[1970-Jan-01 01:56:19.512348]: load filament cancelled
[1970-Jan-01 01:56:19.514730]: BotModel::stateNotification
[1970-Jan-01 01:56:19.972691]: BotModel::stateNotification
[1970-Jan-01 01:56:20.055499]: load standard step change: running
[1970-Jan-01 01:56:21.547328]: BotModel::stateNotification
[1970-Jan-01 01:56:21.629098]: load standard step change: preheating
[1970-Jan-01 01:56:23.397630]: BotModel::stateNotification
[1970-Jan-01 01:56:23.479057]: load standard step change: extrusion
[1970-Jan-01 01:56:56.437321]: Setting error code
[1970-Jan-01 01:56:56.981156]: BotModel::stateNotification
[1970-Jan-01 01:56:58.658166]: load standard step change: unloading_filament
[1970-Jan-01 01:56:58.860272]: BotModel::stateNotification
[1970-Jan-01 01:56:59.515645]: load standard step change: cancelling
[1970-Jan-01 01:56:59.987364]: Setting error code
[1970-Jan-01 01:57:00.132041]: BotModel::stateNotification
[1970-Jan-01 01:57:00.137950]: load standard step change: cleaning_up
[1970-Jan-01 01:57:00.144959]: BotModel::stateNotification
[1970-Jan-01 01:57:00.150595]: load standard step change: done
[1970-Jan-01 01:57:00.152671]: load filament cancelled
[1970-Jan-01 01:57:00.155163]: BotModel::stateNotification
[1970-Jan-01 01:57:40.050468]: ChangeExtruderProcess: Transitioned to state: 2
[1970-Jan-01 01:57:41.269654]: BotModel::stateNotification
[1970-Jan-01 01:57:41.352844]: BotModel::stateNotification
[1970-Jan-01 01:57:41.387607]: BotModel::stateNotification
[1970-Jan-01 01:57:41.426286]: BotModel::stateNotification
[1970-Jan-01 01:57:42.298388]: BotModel::stateNotification
[1970-Jan-01 01:57:42.311902]: ChangeExtruderProcess: Transitioned to state: 3
[1970-Jan-01 01:57:44.907026]: BotModel::stateNotification
[1970-Jan-01 01:57:45.668654]: Setting error code
[1970-Jan-01 01:57:45.738101]: BotModel::stateNotification
[1970-Jan-01 01:57:45.747076]: BotModel::stateNotification
[1970-Jan-01 01:57:45.756087]: ChangeExtruderProcess: Transitioned to state: 6
[1970-Jan-01 01:57:45.810203]: BotModel::stateNotification
[1970-Jan-01 01:57:53.931063]: ChangeExtruderProcess: Transitioned to state: 2
[1970-Jan-01 01:57:56.086642]: BotModel::stateNotification
[1970-Jan-01 01:57:56.103581]: ChangeExtruderProcess: Transitioned to state: 3
[1970-Jan-01 01:57:57.365180]: BotModel::stateNotification
[1970-Jan-01 01:57:57.548324]: BotModel::stateNotification
[1970-Jan-01 01:57:57.629813]: ChangeExtruderProcess: Transitioned to state: 4
[1970-Jan-01 01:57:57.716330]: BotModel::stateNotification
[1970-Jan-01 01:58:01.276818]: ChangeExtruderProcess: Transitioned to state: 0
[1970-Jan-01 01:58:03.762438]: BotModel::stateNotification
[1970-Jan-01 01:58:03.840918]: load standard step change: running
[1970-Jan-01 01:58:05.114721]: BotModel::stateNotification
[1970-Jan-01 01:58:05.189602]: load standard step change: preheating
[1970-Jan-01 01:59:03.344286]: BotModel::stateNotification
[1970-Jan-01 01:59:03.393821]: load standard step change: extrusion
[1970-Jan-01 01:59:11.242053]: BotModel::stateNotification
[1970-Jan-01 01:59:12.845038]: load standard step change: cancelling
[1970-Jan-01 01:59:12.967934]: BotModel::stateNotification
[1970-Jan-01 01:59:13.044020]: load standard step change: cleaning_up
[1970-Jan-01 01:59:13.493185]: BotModel::stateNotification
[1970-Jan-01 01:59:13.575540]: load standard step change: done
[1970-Jan-01 01:59:13.578018]: load filament cancelled
[1970-Jan-01 01:59:13.672082]: BotModel::stateNotification
[1970-Jan-01 01:59:15.589304]: BotModel::stateNotification
[1970-Jan-01 01:59:15.667059]: load standard step change: running
[1970-Jan-01 01:59:15.709632]: BotModel::stateNotification
[1970-Jan-01 01:59:16.900436]: load standard step change: preheating
[1970-Jan-01 01:59:18.353340]: BotModel::stateNotification
[1970-Jan-01 01:59:18.400429]: load standard step change: extrusion
[1970-Jan-01 02:00:10.809367]: BotModel::stateNotification
[1970-Jan-01 02:00:10.903046]: load standard step change: cleaning_up
[1970-Jan-01 02:00:11.277622]: BotModel::stateNotification
[1970-Jan-01 02:00:11.359733]: load standard step change: done
[1970-Jan-01 02:00:11.371984]: load filament completed
[1970-Jan-01 02:00:11.538504]: BotModel::stateNotification
[1970-Jan-01 02:24:03.666776]: BotModel::stateNotification
[1970-Jan-01 02:24:03.744581]: load standard step change: running
[1970-Jan-01 02:24:03.817385]: BotModel::stateNotification
[1970-Jan-01 02:24:05.035825]: load standard step change: preheating
[1970-Jan-01 02:24:20.536656]: BotModel::stateNotification
[1970-Jan-01 02:24:20.554147]: load standard step change: cancelling
[1970-Jan-01 02:24:21.290510]: Setting error code
[1970-Jan-01 02:24:21.493639]: BotModel::stateNotification
[1970-Jan-01 02:24:21.499221]: load standard step change: cleaning_up
[1970-Jan-01 02:24:21.502792]: BotModel::stateNotification
[1970-Jan-01 02:24:21.508382]: load standard step change: done
[1970-Jan-01 02:24:21.511564]: load filament cancelled
[1970-Jan-01 02:24:21.813753]: BotModel::stateNotification
[1970-Jan-01 02:24:24.370670]: ChangeExtruderProcess: Transitioned to state: 2
[1970-Jan-01 02:24:25.135405]: BotModel::stateNotification
[1970-Jan-01 02:24:25.295587]: BotModel::stateNotification
[1970-Jan-01 02:24:25.410733]: BotModel::stateNotification
[1970-Jan-01 02:24:25.505066]: BotModel::stateNotification
[1970-Jan-01 02:24:26.261373]: BotModel::stateNotification
[1970-Jan-01 02:24:26.347546]: ChangeExtruderProcess: Transitioned to state: 3
[1970-Jan-01 02:24:26.814117]: BotModel::stateNotification
[1970-Jan-01 02:24:27.072987]: BotModel::stateNotification
[1970-Jan-01 02:24:27.148579]: ChangeExtruderProcess: Transitioned to state: 4
[1970-Jan-01 02:24:27.303561]: BotModel::stateNotification
[1970-Jan-01 02:24:30.326464]: ChangeExtruderProcess: Transitioned to state: 0
[1970-Jan-01 02:24:34.689948]: BotModel::stateNotification
[1970-Jan-01 02:24:35.869979]: load standard step change: running
[1970-Jan-01 02:24:35.937084]: BotModel::stateNotification
[1970-Jan-01 02:24:36.023763]: load standard step change: preheating
[1970-Jan-01 02:27:11.407605]: BotModel::stateNotification
[1970-Jan-01 02:27:11.488535]: load standard step change: extrusion
[1970-Jan-01 02:28:03.746570]: BotModel::stateNotification
[1970-Jan-01 02:28:03.828711]: load standard step change: cleaning_up
[1970-Jan-01 02:28:04.131612]: BotModel::stateNotification
[1970-Jan-01 02:28:04.193723]: load standard step change: done
[1970-Jan-01 02:28:04.195679]: load filament completed
[1970-Jan-01 02:28:04.229585]: BotModel::stateNotification
[1970-Jan-01 02:28:05.739776]: BotModel::stateNotification
[1970-Jan-01 02:28:05.809633]: load standard step change: running
[1970-Jan-01 02:28:07.047051]: BotModel::stateNotification
[1970-Jan-01 02:28:07.119441]: load standard step change: preheating
[1970-Jan-01 02:28:21.868472]: BotModel::stateNotification
[1970-Jan-01 02:28:21.924716]: load standard step change: extrusion
[1970-Jan-01 02:29:05.883219]: BotModel::stateNotification
[1970-Jan-01 02:29:05.891633]: load standard step change: cancelling
[1970-Jan-01 02:29:08.119933]: Setting error code
[1970-Jan-01 02:29:08.395500]: BotModel::stateNotification
[1970-Jan-01 02:29:08.401386]: load standard step change: cleaning_up
[1970-Jan-01 02:29:08.409086]: BotModel::stateNotification
[1970-Jan-01 02:29:08.415899]: load standard step change: done
[1970-Jan-01 02:29:08.418087]: load filament cancelled
[1970-Jan-01 02:29:08.719020]: BotModel::stateNotification
[1970-Jan-03 20:06:22.102245]: ChangeExtruderProcess: Transitioned to state: 2
[1970-Jan-03 20:06:23.210570]: BotModel::stateNotification
[1970-Jan-03 20:06:23.259038]: BotModel::stateNotification
[1970-Jan-03 20:06:23.315261]: BotModel::stateNotification
[1970-Jan-03 20:06:23.396646]: BotModel::stateNotification
[1970-Jan-03 20:06:25.729313]: BotModel::stateNotification
[1970-Jan-03 20:06:25.742298]: ChangeExtruderProcess: Transitioned to state: 3
[1970-Jan-03 20:06:27.887719]: BotModel::stateNotification
[1970-Jan-03 20:06:28.784758]: Setting error code
[1970-Jan-03 20:06:28.940897]: BotModel::stateNotification
[1970-Jan-03 20:06:28.947174]: BotModel::stateNotification
[1970-Jan-03 20:06:28.963292]: ChangeExtruderProcess: Transitioned to state: 6
[1970-Jan-03 20:06:29.070581]: BotModel::stateNotification
[1970-Jan-03 20:06:31.042163]: ChangeExtruderProcess: Transitioned to state: 2
[1970-Jan-03 20:06:32.676721]: BotModel::stateNotification
[1970-Jan-03 20:06:32.695029]: ChangeExtruderProcess: Transitioned to state: 3
[1970-Jan-03 20:06:34.848289]: BotModel::stateNotification
[1970-Jan-03 20:06:35.731895]: Setting error code
[1970-Jan-03 20:06:35.863464]: BotModel::stateNotification
[1970-Jan-03 20:06:35.880387]: BotModel::stateNotification
[1970-Jan-03 20:06:35.885924]: ChangeExtruderProcess: Transitioned to state: 6
[1970-Jan-03 20:06:35.991438]: BotModel::stateNotification
[1970-Jan-03 20:06:37.221971]: ChangeExtruderProcess: Transitioned to state: 2
[1970-Jan-03 20:06:39.450381]: BotModel::stateNotification
[1970-Jan-03 20:06:39.532406]: ChangeExtruderProcess: Transitioned to state: 3
[1970-Jan-03 20:06:39.738212]: BotModel::stateNotification
[1970-Jan-03 20:06:39.835222]: BotModel::stateNotification
[1970-Jan-03 20:06:39.917721]: ChangeExtruderProcess: Transitioned to state: 4
[1970-Jan-03 20:06:40.121071]: BotModel::stateNotification
[1970-Jan-03 20:06:43.554784]: ChangeExtruderProcess: Transitioned to state: 0
[1970-Jan-05 04:23:02.145190]: BotModel::stateNotification
[1970-Jan-05 04:23:02.223119]: load standard step change: running
[1970-Jan-05 04:23:02.460505]: BotModel::stateNotification
[1970-Jan-05 04:23:02.543409]: load standard step change: preheating
[1970-Jan-05 04:25:51.534597]: BotModel::stateNotification
[1970-Jan-05 04:25:51.618485]: load standard step change: extrusion
[1970-Jan-05 04:26:43.884181]: BotModel::stateNotification
[1970-Jan-05 04:26:43.959796]: load standard step change: cleaning_up
[1970-Jan-05 04:26:43.985220]: BotModel::stateNotification
[1970-Jan-05 04:26:44.074054]: load standard step change: done
[1970-Jan-05 04:26:44.076165]: load filament completed
[1970-Jan-05 04:26:44.369095]: BotModel::stateNotification
[1970-Jan-05 04:26:48.894700]: BotModel::stateNotification
[1970-Jan-05 04:26:48.969473]: load standard step change: running
[1970-Jan-05 04:26:49.204193]: BotModel::stateNotification
[1970-Jan-05 04:26:49.279019]: load standard step change: preheating
[1970-Jan-05 04:27:00.862574]: BotModel::stateNotification
[1970-Jan-05 04:27:00.942240]: load standard step change: extrusion
[1970-Jan-05 04:27:16.556858]: Setting error code
[1970-Jan-05 04:27:17.212995]: BotModel::stateNotification
[1970-Jan-05 04:27:17.550908]: load standard step change: unloading_filament
[1970-Jan-05 04:27:35.074991]: BotModel::stateNotification
[1970-Jan-05 04:27:37.542277]: load standard step change: cancelling
[1970-Jan-05 04:27:38.452384]: Setting error code
[1970-Jan-05 04:27:38.752250]: BotModel::stateNotification
[1970-Jan-05 04:27:38.758285]: load standard step change: cleaning_up
[1970-Jan-05 04:27:38.776657]: BotModel::stateNotification
[1970-Jan-05 04:27:38.793272]: load standard step change: done
[1970-Jan-05 04:27:38.795235]: load filament cancelled
[1970-Jan-05 04:27:38.799562]: BotModel::stateNotification
[1970-Jan-05 04:27:50.251867]: ChangeExtruderProcess: Transitioned to state: 2
[1970-Jan-05 04:27:51.351895]: BotModel::stateNotification
[1970-Jan-05 04:27:51.516030]: BotModel::stateNotification
[1970-Jan-05 04:27:51.644922]: BotModel::stateNotification
[1970-Jan-05 04:27:51.860302]: BotModel::stateNotification
[1970-Jan-05 04:27:52.935503]: BotModel::stateNotification
[1970-Jan-05 04:27:53.009155]: ChangeExtruderProcess: Transitioned to state: 3
[1970-Jan-05 04:27:53.105434]: BotModel::stateNotification
[1970-Jan-05 04:27:53.686335]: BotModel::stateNotification
[1970-Jan-05 04:27:53.757664]: ChangeExtruderProcess: Transitioned to state: 4
[1970-Jan-05 04:27:54.105693]: BotModel::stateNotification
[1970-Jan-05 04:27:54.863702]: BotModel::stateNotification
[1970-Jan-05 04:27:54.936366]: ChangeExtruderProcess: Transitioned to state: 3
[1970-Jan-05 04:27:55.163132]: BotModel::stateNotification
[1970-Jan-05 04:27:55.430575]: BotModel::stateNotification
[1970-Jan-05 04:27:55.506565]: ChangeExtruderProcess: Transitioned to state: 4
[1970-Jan-05 04:27:55.702501]: BotModel::stateNotification
[1970-Jan-05 04:27:56.636039]: ChangeExtruderProcess: Transitioned to state: 0
[1970-Jan-05 04:28:01.264470]: BotModel::stateNotification
[1970-Jan-05 04:28:01.356219]: load standard step change: running
[1970-Jan-05 04:28:01.566928]: BotModel::stateNotification
[1970-Jan-05 04:28:01.649471]: load standard step change: preheating
[1970-Jan-05 04:28:42.262288]: BotModel::stateNotification
[1970-Jan-05 04:28:42.413927]: load standard step change: extrusion
[1970-Jan-05 04:28:57.085085]: Setting error code
[1970-Jan-05 04:28:58.173620]: BotModel::stateNotification
[1970-Jan-05 04:28:58.498425]: load standard step change: unloading_filament
[1970-Jan-05 04:29:17.401837]: BotModel::stateNotification
[1970-Jan-05 04:29:18.223708]: load standard step change: cancelling
[1970-Jan-05 04:29:18.598735]: BotModel::stateNotification
[1970-Jan-05 04:29:18.701430]: load standard step change: cleaning_up
[1970-Jan-05 04:29:18.706549]: BotModel::stateNotification
[1970-Jan-05 04:29:18.800659]: load standard step change: done
[1970-Jan-05 04:29:18.802768]: load filament cancelled
[1970-Jan-05 04:29:18.959588]: BotModel::stateNotification
[1970-Jan-05 04:29:22.444836]: BotModel::stateNotification
[1970-Jan-05 04:29:22.493056]: load standard step change: running
[1970-Jan-05 04:29:23.054201]: BotModel::stateNotification
[1970-Jan-05 04:29:23.141081]: load standard step change: preheating
[1970-Jan-05 04:29:23.697683]: BotModel::stateNotification
[1970-Jan-05 04:29:23.793187]: load standard step change: extrusion
[1970-Jan-05 04:29:56.232058]: Setting error code
[1970-Jan-05 04:29:57.061947]: BotModel::stateNotification
[1970-Jan-05 04:29:57.383077]: load standard step change: unloading_filament
[1970-Jan-05 04:30:16.512451]: BotModel::stateNotification
[1970-Jan-05 04:30:17.201818]: load standard step change: cancelling
[1970-Jan-05 04:30:17.348488]: BotModel::stateNotification
[1970-Jan-05 04:30:17.432711]: load standard step change: cleaning_up
[1970-Jan-05 04:30:17.461459]: BotModel::stateNotification
[1970-Jan-05 04:30:17.548310]: load standard step change: done
[1970-Jan-05 04:30:17.560696]: load filament cancelled
[1970-Jan-05 04:30:17.736884]: BotModel::stateNotification
[1970-Jan-05 04:31:07.666166]: BotModel::stateNotification
[1970-Jan-05 04:31:07.674410]: load standard step change: running
[1970-Jan-05 04:31:07.747299]: BotModel::stateNotification
[1970-Jan-05 04:31:07.765020]: load standard step change: cancelling
[1970-Jan-05 04:31:08.661660]: Setting error code
[1970-Jan-05 04:31:08.946008]: BotModel::stateNotification
[1970-Jan-05 04:31:08.962403]: load standard step change: cleaning_up
[1970-Jan-05 04:31:08.964986]: BotModel::stateNotification
[1970-Jan-05 04:31:08.981433]: load standard step change: done
[1970-Jan-05 04:31:08.983404]: load filament cancelled
[1970-Jan-05 04:31:08.987509]: BotModel::stateNotification
[1970-Jan-05 04:31:09.093241]: ChangeExtruderProcess: Transitioned to state: 2
[1970-Jan-05 04:31:11.485913]: BotModel::stateNotification
[1970-Jan-05 04:31:12.137499]: BotModel::stateNotification
[1970-Jan-05 04:31:12.676958]: BotModel::stateNotification
[1970-Jan-05 04:31:13.279053]: BotModel::stateNotification
[1970-Jan-05 04:31:14.086686]: BotModel::stateNotification
[1970-Jan-05 04:31:14.094123]: ChangeExtruderProcess: Transitioned to state: 3
[1970-Jan-05 04:31:15.456018]: BotModel::stateNotification
[1970-Jan-05 04:31:16.344996]: Setting error code
[1970-Jan-05 04:31:16.481388]: BotModel::stateNotification
[1970-Jan-05 04:31:16.488147]: BotModel::stateNotification
[1970-Jan-05 04:31:16.504109]: ChangeExtruderProcess: Transitioned to state: 6
[1970-Jan-05 04:31:16.723579]: BotModel::stateNotification
[1970-Jan-05 04:31:18.151701]: ChangeExtruderProcess: Transitioned to state: 2
[1970-Jan-05 04:31:26.248039]: BotModel::stateNotification
[1970-Jan-05 04:31:26.263755]: ChangeExtruderProcess: Transitioned to state: 3
[1970-Jan-05 04:31:28.233202]: BotModel::stateNotification
[1970-Jan-05 04:31:29.122708]: Setting error code
[1970-Jan-05 04:31:29.236605]: BotModel::stateNotification
[1970-Jan-05 04:31:29.261493]: BotModel::stateNotification
[1970-Jan-05 04:31:29.267492]: ChangeExtruderProcess: Transitioned to state: 6
[1970-Jan-05 04:31:29.375932]: BotModel::stateNotification
[1970-Jan-05 04:31:30.571655]: ChangeExtruderProcess: Transitioned to state: 2
[1970-Jan-05 04:31:34.367347]: BotModel::stateNotification
[1970-Jan-05 04:31:34.381117]: ChangeExtruderProcess: Transitioned to state: 3
[1970-Jan-05 04:31:36.408743]: BotModel::stateNotification
[1970-Jan-05 04:31:37.320900]: Setting error code
[1970-Jan-05 04:31:37.442451]: BotModel::stateNotification
[1970-Jan-05 04:31:37.464762]: BotModel::stateNotification
[1970-Jan-05 04:31:37.481717]: ChangeExtruderProcess: Transitioned to state: 6
[1970-Jan-05 04:31:37.583624]: BotModel::stateNotification
[1970-Jan-05 04:31:44.518971]: ChangeExtruderProcess: Transitioned to state: 2
[1970-Jan-05 04:31:49.099312]: BotModel::stateNotification
[1970-Jan-05 04:31:49.106744]: ChangeExtruderProcess: Transitioned to state: 3
[1970-Jan-05 04:31:50.737905]: BotModel::stateNotification
[1970-Jan-05 04:31:51.007734]: BotModel::stateNotification
[1970-Jan-05 04:31:51.084054]: ChangeExtruderProcess: Transitioned to state: 4
[1970-Jan-05 04:31:51.280814]: BotModel::stateNotification
[1970-Jan-05 04:31:53.885700]: ChangeExtruderProcess: Transitioned to state: 0
[1970-Jan-05 04:31:57.976488]: BotModel::stateNotification
[1970-Jan-05 04:31:58.058595]: load standard step change: running
[1970-Jan-05 04:31:58.270227]: BotModel::stateNotification
[1970-Jan-05 04:31:58.359212]: load standard step change: preheating
[1970-Jan-05 04:33:01.430000]: BotModel::stateNotification
[1970-Jan-05 04:33:01.481056]: load standard step change: extrusion
[1970-Jan-05 04:33:52.457544]: BotModel::stateNotification
[1970-Jan-05 04:33:52.551280]: load standard step change: cancelling
[1970-Jan-05 04:33:53.042793]: BotModel::stateNotification
[1970-Jan-05 04:33:53.124375]: load standard step change: cleaning_up
[1970-Jan-05 04:33:53.522660]: BotModel::stateNotification
[1970-Jan-05 04:33:53.670314]: load standard step change: done
[1970-Jan-05 04:33:53.672323]: load filament cancelled
[1970-Jan-05 04:33:54.027505]: BotModel::stateNotification
[1970-Jan-05 04:33:58.449723]: BotModel::stateNotification
[1970-Jan-05 04:33:58.809598]: BotModel::stateNotification
[1970-Jan-05 04:34:07.239299]: BotModel::stateNotification
[1970-Jan-05 04:34:24.904349]: BotModel::stateNotification
[1970-Jan-05 04:34:25.041024]: BotModel::stateNotification
[1970-Jan-05 04:34:25.451530]: BotModel::stateNotification
[1970-Jan-05 04:34:35.325223]:  UnloadFilamentProcess::continueProcess: No active process to continue
[1970-Jan-05 04:43:36.716184]: BotModel::stateNotification
[1970-Jan-05 04:43:36.733892]: load standard step change: running
[1970-Jan-05 04:43:36.811383]: BotModel::stateNotification
[1970-Jan-05 04:43:36.820231]: load standard step change: cancelling
[1970-Jan-05 04:43:37.703629]: Setting error code
[1970-Jan-05 04:43:37.987087]: BotModel::stateNotification
[1970-Jan-05 04:43:38.002877]: load standard step change: cleaning_up
[1970-Jan-05 04:43:38.005494]: BotModel::stateNotification
[1970-Jan-05 04:43:38.021792]: load standard step change: done
[1970-Jan-05 04:43:38.023765]: load filament cancelled
[1970-Jan-05 04:43:38.026955]: BotModel::stateNotification
[1970-Jan-05 04:43:38.124200]: ChangeExtruderProcess: Transitioned to state: 2
[1970-Jan-05 04:43:39.493021]: BotModel::stateNotification
[1970-Jan-05 04:43:39.576183]: BotModel::stateNotification
[1970-Jan-05 04:43:39.680735]: BotModel::stateNotification
[1970-Jan-05 04:43:39.747838]: BotModel::stateNotification
[1970-Jan-05 04:43:40.807646]: BotModel::stateNotification
[1970-Jan-05 04:43:40.814744]: ChangeExtruderProcess: Transitioned to state: 3
[1970-Jan-05 04:43:43.219687]: BotModel::stateNotification
[1970-Jan-05 04:43:44.122049]: Setting error code
[1970-Jan-05 04:43:44.243443]: BotModel::stateNotification
[1970-Jan-05 04:43:44.262795]: BotModel::stateNotification
[1970-Jan-05 04:43:44.268781]: ChangeExtruderProcess: Transitioned to state: 6
[1970-Jan-05 04:43:44.382662]: BotModel::stateNotification
[1970-Jan-05 04:43:46.774690]: ChangeExtruderProcess: Transitioned to state: 2
[1970-Jan-05 04:43:48.388329]: BotModel::stateNotification
[1970-Jan-05 04:43:48.403726]: ChangeExtruderProcess: Transitioned to state: 3
[1970-Jan-05 04:43:48.877088]: BotModel::stateNotification
[1970-Jan-05 04:43:48.991331]: BotModel::stateNotification
[1970-Jan-05 04:43:49.066311]: ChangeExtruderProcess: Transitioned to state: 4
[1970-Jan-05 04:43:49.277054]: BotModel::stateNotification
[1970-Jan-05 04:43:51.374564]: ChangeExtruderProcess: Transitioned to state: 0
[1970-Jan-05 04:43:54.168703]: BotModel::stateNotification
[1970-Jan-05 04:43:54.257059]: load standard step change: running
[1970-Jan-05 04:43:54.485839]: BotModel::stateNotification
[1970-Jan-05 04:43:54.576580]: load standard step change: preheating
[1970-Jan-05 04:46:15.766235]: BotModel::stateNotification
[1970-Jan-05 04:46:15.818963]: load standard step change: extrusion
[1970-Jan-05 04:47:08.726056]: BotModel::stateNotification
[1970-Jan-05 04:47:08.822443]: load standard step change: cleaning_up
[1970-Jan-05 04:47:08.894484]: BotModel::stateNotification
[1970-Jan-05 04:47:08.976097]: load standard step change: done
[1970-Jan-05 04:47:08.978054]: load filament completed
[1970-Jan-05 04:47:09.213481]: BotModel::stateNotification
[1970-Jan-06 16:46:28.029048]: BotModel::stateNotification
[1970-Jan-06 16:46:28.132458]: BotModel::stateNotification
[1970-Jan-06 16:46:28.283787]: BotModel::stateNotification
[1970-Jan-06 16:46:28.367036]: BotModel::stateNotification